| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) 2021, Linaro Limited |
| */ |
| |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/input/linux-event-codes.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/spmi/spmi.h> |
| |
| /* (Sadly) this PMIC can be configured to be at different SIDs */ |
| #ifndef PMK8350_SID |
| #define PMK8350_SID 0 |
| #endif |
| |
| / { |
| reboot-mode { |
| compatible = "nvmem-reboot-mode"; |
| nvmem-cells = <&reboot_reason>; |
| nvmem-cell-names = "reboot-mode"; |
| mode-recovery = <0x01>; |
| mode-bootloader = <0x02>; |
| }; |
| }; |
| |
| &spmi_bus { |
| pmk8350: pmic@PMK8350_SID { |
| compatible = "qcom,pmk8350", "qcom,spmi-pmic"; |
| reg = <PMK8350_SID SPMI_USID>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pmk8350_pon: pon@1300 { |
| compatible = "qcom,pmk8350-pon"; |
| reg = <0x1300>, <0x800>; |
| reg-names = "hlos", "pbs"; |
| |
| pon_pwrkey: pwrkey { |
| compatible = "qcom,pmk8350-pwrkey"; |
| interrupts = <PMK8350_SID 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; |
| linux,code = <KEY_POWER>; |
| status = "disabled"; |
| }; |
| |
| pon_resin: resin { |
| compatible = "qcom,pmk8350-resin"; |
| interrupts = <PMK8350_SID 0x13 0x6 IRQ_TYPE_EDGE_BOTH>; |
| status = "disabled"; |
| }; |
| }; |
| |
| pmk8350_vadc: adc@3100 { |
| compatible = "qcom,spmi-adc7"; |
| reg = <0x3100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <PMK8350_SID 0x31 0x0 IRQ_TYPE_EDGE_RISING>; |
| #io-channel-cells = <1>; |
| }; |
| |
| pmk8350_adc_tm: adc-tm@3400 { |
| compatible = "qcom,spmi-adc-tm5-gen2"; |
| reg = <0x3400>; |
| interrupts = <PMK8350_SID 0x34 0x0 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #thermal-sensor-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| pmk8350_rtc: rtc@6100 { |
| compatible = "qcom,pmk8350-rtc"; |
| reg = <0x6100>, <0x6200>; |
| reg-names = "rtc", "alarm"; |
| interrupts = <PMK8350_SID 0x62 0x1 IRQ_TYPE_EDGE_RISING>; |
| status = "disabled"; |
| }; |
| |
| pmk8350_sdam_2: nvram@7100 { |
| compatible = "qcom,spmi-sdam"; |
| reg = <0x7100>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x7100 0x100>; |
| |
| reboot_reason: reboot-reason@48 { |
| reg = <0x48 0x1>; |
| bits = <1 7>; |
| }; |
| }; |
| |
| pmk8350_gpios: gpio@b000 { |
| compatible = "qcom,pmk8350-gpio", "qcom,spmi-gpio"; |
| reg = <0xb000>; |
| gpio-controller; |
| gpio-ranges = <&pmk8350_gpios 0 0 4>; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| }; |