| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> |
| */ |
| /dts-v1/; |
| |
| #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
| #include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
| #include "sm6350.dtsi" |
| #include "pm6350.dtsi" |
| |
| / { |
| model = "Sony Xperia 10 III"; |
| compatible = "sony,pdx213", "qcom,sm6350"; |
| chassis-type = "handset"; |
| qcom,msm-id = <434 0x10000>, <459 0x10000>; |
| qcom,board-id = <0x1000B 0>; |
| |
| chosen { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| framebuffer: framebuffer@a0000000 { |
| compatible = "simple-framebuffer"; |
| reg = <0 0xa0000000 0 0x2300000>; |
| width = <1080>; |
| height = <2520>; |
| stride = <(1080 * 4)>; |
| format = "a8r8g8b8"; |
| clocks = <&gcc GCC_DISP_AXI_CLK>; |
| }; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&vol_down_n>; |
| |
| key-volume-down { |
| label = "Volume Down"; |
| linux,code = <KEY_VOLUMEDOWN>; |
| gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| touch_en_vreg: touch-en-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "touch_en_vreg"; |
| gpio = <&tlmm 10 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| |
| vin-supply = <&pm6350_l6>; |
| }; |
| }; |
| |
| &apps_rsc { |
| regulators-0 { |
| compatible = "qcom,pm6350-rpmh-regulators"; |
| qcom,pmic-id = "a"; |
| |
| pm6350_s1: smps1 { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6350_s2: smps2 { |
| regulator-min-microvolt = <1503000>; |
| regulator-max-microvolt = <2048000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6350_l2: ldo2 { |
| regulator-min-microvolt = <1503000>; |
| regulator-max-microvolt = <1980000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6350_l3: ldo3 { |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6350_l4: ldo4 { |
| regulator-min-microvolt = <352000>; |
| regulator-max-microvolt = <801000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6350_l5: ldo5 { |
| regulator-min-microvolt = <1503000>; |
| regulator-max-microvolt = <1980000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6350_l6: ldo6 { |
| regulator-min-microvolt = <1710000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6350_l7: ldo7 { |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <1980000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6350_l8: ldo8 { |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6350_l9: ldo9 { |
| regulator-min-microvolt = <1650000>; |
| regulator-max-microvolt = <3401000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6350_l11: ldo11 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6350_l12: ldo12 { |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <1980000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6350_l13: ldo13 { |
| regulator-min-microvolt = <570000>; |
| regulator-max-microvolt = <650000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6350_l14: ldo14 { |
| regulator-min-microvolt = <1700000>; |
| regulator-max-microvolt = <1900000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6350_l15: ldo15 { |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1305000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6350_l16: ldo16 { |
| regulator-min-microvolt = <830000>; |
| regulator-max-microvolt = <921000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6350_l18: ldo18 { |
| regulator-min-microvolt = <788000>; |
| regulator-max-microvolt = <1049000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6350_l19: ldo19 { |
| regulator-min-microvolt = <1080000>; |
| regulator-max-microvolt = <1305000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6350_l20: ldo20 { |
| regulator-min-microvolt = <530000>; |
| regulator-max-microvolt = <801000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6350_l21: ldo21 { |
| regulator-min-microvolt = <751000>; |
| regulator-max-microvolt = <825000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6350_l22: ldo22 { |
| regulator-min-microvolt = <1080000>; |
| regulator-max-microvolt = <1305000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| |
| regulators-1 { |
| compatible = "qcom,pm6150l-rpmh-regulators"; |
| qcom,pmic-id = "e"; |
| |
| pm6150l_s8: smps8 { |
| regulator-min-microvolt = <313000>; |
| regulator-max-microvolt = <1395000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6150l_l1: ldo1 { |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <1980000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6150l_l2: ldo2 { |
| regulator-min-microvolt = <1170000>; |
| regulator-max-microvolt = <1305000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6150l_l3: ldo3 { |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1299000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6150l_l4: ldo4 { |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6150l_l5: ldo5 { |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6150l_l6: ldo6 { |
| regulator-min-microvolt = <1700000>; |
| regulator-max-microvolt = <2950000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| regulator-allow-set-load; |
| regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6150l_l7: ldo7 { |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6150l_l8: ldo8 { |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <2000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6150l_l9: ldo9 { |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <2960000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| regulator-allow-set-load; |
| regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6150l_l10: ldo10 { |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3401000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6150l_l11: ldo11 { |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3401000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm6150l_bob: bob { |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <5492000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; |
| regulator-allow-bypass; |
| }; |
| }; |
| }; |
| |
| &gpi_dma0 { |
| status = "okay"; |
| }; |
| |
| &gpi_dma1 { |
| status = "okay"; |
| }; |
| |
| &i2c8 { |
| clock-frequency = <400000>; |
| status = "okay"; |
| |
| touchscreen@48 { |
| compatible = "samsung,s6sy761"; |
| reg = <0x48>; |
| interrupt-parent = <&tlmm>; |
| interrupts = <22 0x2008>; |
| vdd-supply = <&pm6350_l11>; |
| avdd-supply = <&touch_en_vreg>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&ts_int_default &ts_active>; |
| }; |
| }; |
| |
| &pm6350_gpios { |
| vol_down_n: vol-down-n-state { |
| pins = "gpio2"; |
| function = PMIC_GPIO_FUNC_NORMAL; |
| power-source = <0>; |
| bias-disable; |
| input-enable; |
| }; |
| }; |
| |
| &pm6350_resin { |
| linux,code = <KEY_VOLUMEUP>; |
| status = "okay"; |
| }; |
| |
| &qupv3_id_0 { |
| status = "okay"; |
| }; |
| |
| &qupv3_id_1 { |
| status = "okay"; |
| }; |
| |
| &sdc2_off_state { |
| sd-cd-pins { |
| pins = "gpio94"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| }; |
| |
| &sdc2_on_state { |
| sd-cd-pins { |
| pins = "gpio94"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| }; |
| |
| &sdhc_2 { |
| status = "okay"; |
| |
| vmmc-supply = <&pm6150l_l9>; |
| vqmmc-supply = <&pm6150l_l6>; |
| |
| cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &tlmm { |
| gpio-reserved-ranges = <13 4>, <45 2>, <56 2>; |
| |
| ts_active: ts-active-state { |
| pins = "gpio21"; |
| function = "gpio"; |
| drive-strength = <8>; |
| bias-pull-up; |
| }; |
| |
| ts_int_default: ts-int-default-state { |
| pins = "gpio22"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| }; |
| |
| &usb_1 { |
| status = "okay"; |
| }; |
| |
| &usb_1_dwc3 { |
| maximum-speed = "super-speed"; |
| dr_mode = "peripheral"; |
| }; |
| |
| &usb_1_hsphy { |
| status = "okay"; |
| }; |
| |
| &usb_1_qmpphy { |
| status = "okay"; |
| }; |
