| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * linux/arch/parisc/kernel/time.c |
| * |
| * Copyright (C) 1991, 1992, 1995 Linus Torvalds |
| * Modifications for ARM (C) 1994, 1995, 1996,1997 Russell King |
| * Copyright (C) 1999 SuSE GmbH, (Philipp Rumpf, prumpf@tux.org) |
| * |
| * 1994-07-02 Alan Modra |
| * fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime |
| * 1998-12-20 Updated NTP code according to technical memorandum Jan '96 |
| * "A Kernel Model for Precision Timekeeping" by Dave Mills |
| */ |
| #include <linux/errno.h> |
| #include <linux/module.h> |
| #include <linux/rtc.h> |
| #include <linux/sched.h> |
| #include <linux/sched/clock.h> |
| #include <linux/sched_clock.h> |
| #include <linux/kernel.h> |
| #include <linux/param.h> |
| #include <linux/string.h> |
| #include <linux/mm.h> |
| #include <linux/interrupt.h> |
| #include <linux/time.h> |
| #include <linux/init.h> |
| #include <linux/smp.h> |
| #include <linux/profile.h> |
| #include <linux/clocksource.h> |
| #include <linux/platform_device.h> |
| #include <linux/ftrace.h> |
| |
| #include <linux/uaccess.h> |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/page.h> |
| #include <asm/param.h> |
| #include <asm/pdc.h> |
| #include <asm/led.h> |
| |
| #include <linux/timex.h> |
| |
| int time_keeper_id __read_mostly; /* CPU used for timekeeping. */ |
| |
| static unsigned long clocktick __ro_after_init; /* timer cycles per tick */ |
| |
| /* |
| * We keep time on PA-RISC Linux by using the Interval Timer which is |
| * a pair of registers; one is read-only and one is write-only; both |
| * accessed through CR16. The read-only register is 32 or 64 bits wide, |
| * and increments by 1 every CPU clock tick. The architecture only |
| * guarantees us a rate between 0.5 and 2, but all implementations use a |
| * rate of 1. The write-only register is 32-bits wide. When the lowest |
| * 32 bits of the read-only register compare equal to the write-only |
| * register, it raises a maskable external interrupt. Each processor has |
| * an Interval Timer of its own and they are not synchronised. |
| * |
| * We want to generate an interrupt every 1/HZ seconds. So we program |
| * CR16 to interrupt every @clocktick cycles. The it_value in cpu_data |
| * is programmed with the intended time of the next tick. We can be |
| * held off for an arbitrarily long period of time by interrupts being |
| * disabled, so we may miss one or more ticks. |
| */ |
| irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id) |
| { |
| unsigned long now; |
| unsigned long next_tick; |
| unsigned long ticks_elapsed = 0; |
| unsigned int cpu = smp_processor_id(); |
| struct cpuinfo_parisc *cpuinfo = &per_cpu(cpu_data, cpu); |
| |
| /* gcc can optimize for "read-only" case with a local clocktick */ |
| unsigned long cpt = clocktick; |
| |
| /* Initialize next_tick to the old expected tick time. */ |
| next_tick = cpuinfo->it_value; |
| |
| /* Calculate how many ticks have elapsed. */ |
| now = mfctl(16); |
| do { |
| ++ticks_elapsed; |
| next_tick += cpt; |
| } while (next_tick - now > cpt); |
| |
| /* Store (in CR16 cycles) up to when we are accounting right now. */ |
| cpuinfo->it_value = next_tick; |
| |
| /* Go do system house keeping. */ |
| if (IS_ENABLED(CONFIG_SMP) && (cpu != time_keeper_id)) |
| ticks_elapsed = 0; |
| legacy_timer_tick(ticks_elapsed); |
| |
| /* Skip clockticks on purpose if we know we would miss those. |
| * The new CR16 must be "later" than current CR16 otherwise |
| * itimer would not fire until CR16 wrapped - e.g 4 seconds |
| * later on a 1Ghz processor. We'll account for the missed |
| * ticks on the next timer interrupt. |
| * We want IT to fire modulo clocktick even if we miss/skip some. |
| * But those interrupts don't in fact get delivered that regularly. |
| * |
| * "next_tick - now" will always give the difference regardless |
| * if one or the other wrapped. If "now" is "bigger" we'll end up |
| * with a very large unsigned number. |
| */ |
| now = mfctl(16); |
| while (next_tick - now > cpt) |
| next_tick += cpt; |
| |
| /* Program the IT when to deliver the next interrupt. |
| * Only bottom 32-bits of next_tick are writable in CR16! |
| * Timer interrupt will be delivered at least a few hundred cycles |
| * after the IT fires, so if we are too close (<= 8000 cycles) to the |
| * next cycle, simply skip it. |
| */ |
| if (next_tick - now <= 8000) |
| next_tick += cpt; |
| mtctl(next_tick, 16); |
| |
| return IRQ_HANDLED; |
| } |
| |
| |
| unsigned long profile_pc(struct pt_regs *regs) |
| { |
| unsigned long pc = instruction_pointer(regs); |
| |
| if (regs->gr[0] & PSW_N) |
| pc -= 4; |
| |
| #ifdef CONFIG_SMP |
| if (in_lock_functions(pc)) |
| pc = regs->gr[2]; |
| #endif |
| |
| return pc; |
| } |
| EXPORT_SYMBOL(profile_pc); |
| |
| |
| /* clock source code */ |
| |
| static u64 notrace read_cr16(struct clocksource *cs) |
| { |
| return get_cycles(); |
| } |
| |
| static struct clocksource clocksource_cr16 = { |
| .name = "cr16", |
| .rating = 300, |
| .read = read_cr16, |
| .mask = CLOCKSOURCE_MASK(BITS_PER_LONG), |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, |
| }; |
| |
| void start_cpu_itimer(void) |
| { |
| unsigned int cpu = smp_processor_id(); |
| unsigned long next_tick = mfctl(16) + clocktick; |
| |
| mtctl(next_tick, 16); /* kick off Interval Timer (CR16) */ |
| |
| per_cpu(cpu_data, cpu).it_value = next_tick; |
| } |
| |
| #if IS_ENABLED(CONFIG_RTC_DRV_GENERIC) |
| static int rtc_generic_get_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct pdc_tod tod_data; |
| |
| memset(tm, 0, sizeof(*tm)); |
| if (pdc_tod_read(&tod_data) < 0) |
| return -EOPNOTSUPP; |
| |
| /* we treat tod_sec as unsigned, so this can work until year 2106 */ |
| rtc_time64_to_tm(tod_data.tod_sec, tm); |
| return 0; |
| } |
| |
| static int rtc_generic_set_time(struct device *dev, struct rtc_time *tm) |
| { |
| time64_t secs = rtc_tm_to_time64(tm); |
| int ret; |
| |
| /* hppa has Y2K38 problem: pdc_tod_set() takes an u32 value! */ |
| ret = pdc_tod_set(secs, 0); |
| if (ret != 0) { |
| pr_warn("pdc_tod_set(%lld) returned error %d\n", secs, ret); |
| if (ret == PDC_INVALID_ARG) |
| return -EINVAL; |
| return -EOPNOTSUPP; |
| } |
| |
| return 0; |
| } |
| |
| static const struct rtc_class_ops rtc_generic_ops = { |
| .read_time = rtc_generic_get_time, |
| .set_time = rtc_generic_set_time, |
| }; |
| |
| static int __init rtc_init(void) |
| { |
| struct platform_device *pdev; |
| |
| pdev = platform_device_register_data(NULL, "rtc-generic", -1, |
| &rtc_generic_ops, |
| sizeof(rtc_generic_ops)); |
| |
| return PTR_ERR_OR_ZERO(pdev); |
| } |
| device_initcall(rtc_init); |
| #endif |
| |
| void read_persistent_clock64(struct timespec64 *ts) |
| { |
| static struct pdc_tod tod_data; |
| if (pdc_tod_read(&tod_data) == 0) { |
| ts->tv_sec = tod_data.tod_sec; |
| ts->tv_nsec = tod_data.tod_usec * 1000; |
| } else { |
| printk(KERN_ERR "Error reading tod clock\n"); |
| ts->tv_sec = 0; |
| ts->tv_nsec = 0; |
| } |
| } |
| |
| |
| static u64 notrace read_cr16_sched_clock(void) |
| { |
| return get_cycles(); |
| } |
| |
| |
| /* |
| * timer interrupt and sched_clock() initialization |
| */ |
| |
| void __init time_init(void) |
| { |
| unsigned long cr16_hz; |
| |
| clocktick = (100 * PAGE0->mem_10msec) / HZ; |
| start_cpu_itimer(); /* get CPU 0 started */ |
| |
| cr16_hz = 100 * PAGE0->mem_10msec; /* Hz */ |
| |
| /* register as sched_clock source */ |
| sched_clock_register(read_cr16_sched_clock, BITS_PER_LONG, cr16_hz); |
| } |
| |
| static int __init init_cr16_clocksource(void) |
| { |
| /* |
| * The cr16 interval timers are not synchronized across CPUs. |
| */ |
| if (num_online_cpus() > 1 && !running_on_qemu) { |
| clocksource_cr16.name = "cr16_unstable"; |
| clocksource_cr16.flags = CLOCK_SOURCE_UNSTABLE; |
| clocksource_cr16.rating = 0; |
| } |
| |
| /* register at clocksource framework */ |
| clocksource_register_hz(&clocksource_cr16, |
| 100 * PAGE0->mem_10msec); |
| |
| return 0; |
| } |
| |
| device_initcall(init_cr16_clocksource); |