| /* |
| * B4420 Silicon/SoC Device Tree Source (post include) |
| * |
| * Copyright 2012 - 2015 Freescale Semiconductor, Inc. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Freescale Semiconductor nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * |
| * ALTERNATIVELY, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") as published by the Free Software |
| * Foundation, either version 2 of that License or (at your option) any |
| * later version. |
| * |
| * This software is provided by Freescale Semiconductor "as is" and any |
| * express or implied warranties, including, but not limited to, the implied |
| * warranties of merchantability and fitness for a particular purpose are |
| * disclaimed. In no event shall Freescale Semiconductor be liable for any |
| * direct, indirect, incidental, special, exemplary, or consequential damages |
| * (including, but not limited to, procurement of substitute goods or services; |
| * loss of use, data, or profits; or business interruption) however caused and |
| * on any theory of liability, whether in contract, strict liability, or tort |
| * (including negligence or otherwise) arising in any way out of the use of |
| * this software, even if advised of the possibility of such damage. |
| */ |
| |
| &bman_fbpr { |
| compatible = "fsl,bman-fbpr"; |
| alloc-ranges = <0 0 0x10000 0>; |
| }; |
| |
| &qman_fqd { |
| compatible = "fsl,qman-fqd"; |
| alloc-ranges = <0 0 0x10000 0>; |
| }; |
| |
| &qman_pfdr { |
| compatible = "fsl,qman-pfdr"; |
| alloc-ranges = <0 0 0x10000 0>; |
| }; |
| |
| &ifc { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| compatible = "fsl,ifc", "simple-bus"; |
| interrupts = <25 2 0 0>; |
| }; |
| |
| /* controller at 0x200000 */ |
| &pci0 { |
| compatible = "fsl,b4-pcie", "fsl,qoriq-pcie-v2.4"; |
| device_type = "pci"; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| bus-range = <0x0 0xff>; |
| interrupts = <20 2 0 0>; |
| fsl,iommu-parent = <&pamu0>; |
| pcie@0 { |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| reg = <0 0 0 0 0>; |
| interrupts = <20 2 0 0>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0 0 1 &mpic 40 1 0 0 |
| 0000 0 0 2 &mpic 1 1 0 0 |
| 0000 0 0 3 &mpic 2 1 0 0 |
| 0000 0 0 4 &mpic 3 1 0 0 |
| >; |
| }; |
| }; |
| |
| &dcsr { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,dcsr", "simple-bus"; |
| |
| dcsr-epu@0 { |
| compatible = "fsl,b4-dcsr-epu", "fsl,dcsr-epu"; |
| interrupts = <52 2 0 0 |
| 84 2 0 0 |
| 85 2 0 0 |
| 94 2 0 0 |
| 95 2 0 0>; |
| reg = <0x0 0x1000>; |
| }; |
| dcsr-npc { |
| compatible = "fsl,b4-dcsr-cnpc", "fsl,dcsr-cnpc"; |
| reg = <0x1000 0x1000 0x1002000 0x10000>; |
| }; |
| dcsr-nxc@2000 { |
| compatible = "fsl,dcsr-nxc"; |
| reg = <0x2000 0x1000>; |
| }; |
| dcsr-corenet { |
| compatible = "fsl,dcsr-corenet"; |
| reg = <0x8000 0x1000 0x1A000 0x1000>; |
| }; |
| dcsr-dpaa@9000 { |
| compatible = "fsl,b4-dcsr-dpaa", "fsl,dcsr-dpaa"; |
| reg = <0x9000 0x1000>; |
| }; |
| dcsr-ocn@11000 { |
| compatible = "fsl,b4-dcsr-ocn", "fsl,dcsr-ocn"; |
| reg = <0x11000 0x1000>; |
| }; |
| dcsr-ddr@12000 { |
| compatible = "fsl,dcsr-ddr"; |
| dev-handle = <&ddr1>; |
| reg = <0x12000 0x1000>; |
| }; |
| dcsr-nal@18000 { |
| compatible = "fsl,b4-dcsr-nal", "fsl,dcsr-nal"; |
| reg = <0x18000 0x1000>; |
| }; |
| dcsr-rcpm@22000 { |
| compatible = "fsl,b4-dcsr-rcpm", "fsl,dcsr-rcpm"; |
| reg = <0x22000 0x1000>; |
| }; |
| dcsr-snpc@30000 { |
| compatible = "fsl,b4-dcsr-snpc", "fsl,dcsr-snpc"; |
| reg = <0x30000 0x1000 0x1022000 0x10000>; |
| }; |
| dcsr-snpc@31000 { |
| compatible = "fsl,b4-dcsr-snpc", "fsl,dcsr-snpc"; |
| reg = <0x31000 0x1000 0x1042000 0x10000>; |
| }; |
| dcsr-cpu-sb-proxy@100000 { |
| compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; |
| cpu-handle = <&cpu0>; |
| reg = <0x100000 0x1000 0x101000 0x1000>; |
| }; |
| }; |
| |
| &bportals { |
| #address-cells = <0x1>; |
| #size-cells = <0x1>; |
| compatible = "simple-bus"; |
| |
| bman-portal@0 { |
| compatible = "fsl,bman-portal"; |
| reg = <0x0 0x4000>, <0x1000000 0x1000>; |
| interrupts = <105 2 0 0>; |
| }; |
| bman-portal@4000 { |
| compatible = "fsl,bman-portal"; |
| reg = <0x4000 0x4000>, <0x1001000 0x1000>; |
| interrupts = <107 2 0 0>; |
| }; |
| bman-portal@8000 { |
| compatible = "fsl,bman-portal"; |
| reg = <0x8000 0x4000>, <0x1002000 0x1000>; |
| interrupts = <109 2 0 0>; |
| }; |
| bman-portal@c000 { |
| compatible = "fsl,bman-portal"; |
| reg = <0xc000 0x4000>, <0x1003000 0x1000>; |
| interrupts = <111 2 0 0>; |
| }; |
| bman-portal@10000 { |
| compatible = "fsl,bman-portal"; |
| reg = <0x10000 0x4000>, <0x1004000 0x1000>; |
| interrupts = <113 2 0 0>; |
| }; |
| bman-portal@14000 { |
| compatible = "fsl,bman-portal"; |
| reg = <0x14000 0x4000>, <0x1005000 0x1000>; |
| interrupts = <115 2 0 0>; |
| }; |
| bman-portal@18000 { |
| compatible = "fsl,bman-portal"; |
| reg = <0x18000 0x4000>, <0x1006000 0x1000>; |
| interrupts = <117 2 0 0>; |
| }; |
| bman-portal@1c000 { |
| compatible = "fsl,bman-portal"; |
| reg = <0x1c000 0x4000>, <0x1007000 0x1000>; |
| interrupts = <119 2 0 0>; |
| }; |
| bman-portal@20000 { |
| compatible = "fsl,bman-portal"; |
| reg = <0x20000 0x4000>, <0x1008000 0x1000>; |
| interrupts = <121 2 0 0>; |
| }; |
| bman-portal@24000 { |
| compatible = "fsl,bman-portal"; |
| reg = <0x24000 0x4000>, <0x1009000 0x1000>; |
| interrupts = <123 2 0 0>; |
| }; |
| bman-portal@28000 { |
| compatible = "fsl,bman-portal"; |
| reg = <0x28000 0x4000>, <0x100a000 0x1000>; |
| interrupts = <125 2 0 0>; |
| }; |
| bman-portal@2c000 { |
| compatible = "fsl,bman-portal"; |
| reg = <0x2c000 0x4000>, <0x100b000 0x1000>; |
| interrupts = <127 2 0 0>; |
| }; |
| bman-portal@30000 { |
| compatible = "fsl,bman-portal"; |
| reg = <0x30000 0x4000>, <0x100c000 0x1000>; |
| interrupts = <129 2 0 0>; |
| }; |
| bman-portal@34000 { |
| compatible = "fsl,bman-portal"; |
| reg = <0x34000 0x4000>, <0x100d000 0x1000>; |
| interrupts = <131 2 0 0>; |
| }; |
| }; |
| |
| &qportals { |
| #address-cells = <0x1>; |
| #size-cells = <0x1>; |
| compatible = "simple-bus"; |
| |
| qportal0: qman-portal@0 { |
| compatible = "fsl,qman-portal"; |
| reg = <0x0 0x4000>, <0x1000000 0x1000>; |
| interrupts = <104 0x2 0 0>; |
| cell-index = <0x0>; |
| }; |
| qportal1: qman-portal@4000 { |
| compatible = "fsl,qman-portal"; |
| reg = <0x4000 0x4000>, <0x1001000 0x1000>; |
| interrupts = <106 0x2 0 0>; |
| cell-index = <0x1>; |
| }; |
| qportal2: qman-portal@8000 { |
| compatible = "fsl,qman-portal"; |
| reg = <0x8000 0x4000>, <0x1002000 0x1000>; |
| interrupts = <108 0x2 0 0>; |
| cell-index = <0x2>; |
| }; |
| qportal3: qman-portal@c000 { |
| compatible = "fsl,qman-portal"; |
| reg = <0xc000 0x4000>, <0x1003000 0x1000>; |
| interrupts = <110 0x2 0 0>; |
| cell-index = <0x3>; |
| }; |
| qportal4: qman-portal@10000 { |
| compatible = "fsl,qman-portal"; |
| reg = <0x10000 0x4000>, <0x1004000 0x1000>; |
| interrupts = <112 0x2 0 0>; |
| cell-index = <0x4>; |
| }; |
| qportal5: qman-portal@14000 { |
| compatible = "fsl,qman-portal"; |
| reg = <0x14000 0x4000>, <0x1005000 0x1000>; |
| interrupts = <114 0x2 0 0>; |
| cell-index = <0x5>; |
| }; |
| qportal6: qman-portal@18000 { |
| compatible = "fsl,qman-portal"; |
| reg = <0x18000 0x4000>, <0x1006000 0x1000>; |
| interrupts = <116 0x2 0 0>; |
| cell-index = <0x6>; |
| }; |
| qportal7: qman-portal@1c000 { |
| compatible = "fsl,qman-portal"; |
| reg = <0x1c000 0x4000>, <0x1007000 0x1000>; |
| interrupts = <118 0x2 0 0>; |
| cell-index = <0x7>; |
| }; |
| qportal8: qman-portal@20000 { |
| compatible = "fsl,qman-portal"; |
| reg = <0x20000 0x4000>, <0x1008000 0x1000>; |
| interrupts = <120 0x2 0 0>; |
| cell-index = <0x8>; |
| }; |
| qportal9: qman-portal@24000 { |
| compatible = "fsl,qman-portal"; |
| reg = <0x24000 0x4000>, <0x1009000 0x1000>; |
| interrupts = <122 0x2 0 0>; |
| cell-index = <0x9>; |
| }; |
| qportal10: qman-portal@28000 { |
| compatible = "fsl,qman-portal"; |
| reg = <0x28000 0x4000>, <0x100a000 0x1000>; |
| interrupts = <124 0x2 0 0>; |
| cell-index = <0xa>; |
| }; |
| qportal11: qman-portal@2c000 { |
| compatible = "fsl,qman-portal"; |
| reg = <0x2c000 0x4000>, <0x100b000 0x1000>; |
| interrupts = <126 0x2 0 0>; |
| cell-index = <0xb>; |
| }; |
| qportal12: qman-portal@30000 { |
| compatible = "fsl,qman-portal"; |
| reg = <0x30000 0x4000>, <0x100c000 0x1000>; |
| interrupts = <128 0x2 0 0>; |
| cell-index = <0xc>; |
| }; |
| qportal13: qman-portal@34000 { |
| compatible = "fsl,qman-portal"; |
| reg = <0x34000 0x4000>, <0x100d000 0x1000>; |
| interrupts = <130 0x2 0 0>; |
| cell-index = <0xd>; |
| }; |
| }; |
| |
| &soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| compatible = "simple-bus"; |
| |
| soc-sram-error { |
| compatible = "fsl,soc-sram-error"; |
| interrupts = <16 2 1 2>; |
| }; |
| |
| corenet-law@0 { |
| compatible = "fsl,corenet-law"; |
| reg = <0x0 0x1000>; |
| fsl,num-laws = <32>; |
| }; |
| |
| ddr1: memory-controller@8000 { |
| compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; |
| reg = <0x8000 0x1000>; |
| interrupts = <16 2 1 8>; |
| }; |
| |
| cpc: l3-cache-controller@10000 { |
| compatible = "fsl,b4-l3-cache-controller", "cache"; |
| reg = <0x10000 0x1000>; |
| interrupts = <16 2 1 4>; |
| }; |
| |
| corenet-cf@18000 { |
| compatible = "fsl,corenet2-cf", "fsl,corenet-cf"; |
| reg = <0x18000 0x1000>; |
| interrupts = <16 2 1 0>; |
| fsl,ccf-num-csdids = <32>; |
| fsl,ccf-num-snoopids = <32>; |
| }; |
| |
| iommu@20000 { |
| compatible = "fsl,pamu-v1.0", "fsl,pamu"; |
| reg = <0x20000 0x4000>; |
| fsl,portid-mapping = <0x8000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupts = < |
| 24 2 0 0 |
| 16 2 1 1>; |
| |
| |
| /* PCIe, DMA, SRIO */ |
| pamu0: pamu@0 { |
| reg = <0 0x1000>; |
| fsl,primary-cache-geometry = <8 1>; |
| fsl,secondary-cache-geometry = <32 2>; |
| }; |
| |
| /* AXI2, Maple */ |
| pamu1: pamu@1000 { |
| reg = <0x1000 0x1000>; |
| fsl,primary-cache-geometry = <32 1>; |
| fsl,secondary-cache-geometry = <32 2>; |
| }; |
| |
| /* Q/BMan */ |
| pamu2: pamu@2000 { |
| reg = <0x2000 0x1000>; |
| fsl,primary-cache-geometry = <32 1>; |
| fsl,secondary-cache-geometry = <32 2>; |
| }; |
| |
| /* AXI1, FMAN */ |
| pamu3: pamu@3000 { |
| reg = <0x3000 0x1000>; |
| fsl,primary-cache-geometry = <32 1>; |
| fsl,secondary-cache-geometry = <32 2>; |
| }; |
| }; |
| |
| /include/ "qoriq-mpic4.3.dtsi" |
| |
| guts: global-utilities@e0000 { |
| compatible = "fsl,b4-device-config"; |
| reg = <0xe0000 0xe00>; |
| fsl,has-rstcr; |
| fsl,liodn-bits = <12>; |
| }; |
| |
| /include/ "qoriq-clockgen2.dtsi" |
| |
| rcpm: global-utilities@e2000 { |
| compatible = "fsl,b4-rcpm", "fsl,qoriq-rcpm-2.0"; |
| reg = <0xe2000 0x1000>; |
| }; |
| |
| /include/ "elo3-dma-0.dtsi" |
| dma@100300 { |
| fsl,iommu-parent = <&pamu0>; |
| fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ |
| }; |
| |
| /include/ "elo3-dma-1.dtsi" |
| dma@101300 { |
| fsl,iommu-parent = <&pamu0>; |
| fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ |
| }; |
| |
| /include/ "qonverge-usb2-dr-0.dtsi" |
| usb0: usb@210000 { |
| compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr"; |
| fsl,iommu-parent = <&pamu1>; |
| fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ |
| }; |
| |
| /include/ "qoriq-espi-0.dtsi" |
| spi@110000 { |
| fsl,espi-num-chipselects = <4>; |
| }; |
| |
| /include/ "qoriq-esdhc-0.dtsi" |
| sdhc@114000 { |
| sdhci,auto-cmd12; |
| fsl,iommu-parent = <&pamu1>; |
| fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ |
| }; |
| |
| /include/ "qoriq-i2c-0.dtsi" |
| /include/ "qoriq-i2c-1.dtsi" |
| /include/ "qoriq-duart-0.dtsi" |
| /include/ "qoriq-duart-1.dtsi" |
| /include/ "qoriq-sec5.3-0.dtsi" |
| |
| /include/ "qoriq-qman3.dtsi" |
| qman: qman@318000 { |
| interrupts = <16 2 1 28>; |
| }; |
| |
| /include/ "qoriq-bman1.dtsi" |
| bman: bman@31a000 { |
| interrupts = <16 2 1 29>; |
| }; |
| |
| /include/ "qoriq-fman3-0.dtsi" |
| /include/ "qoriq-fman3-0-1g-0.dtsi" |
| /include/ "qoriq-fman3-0-1g-1.dtsi" |
| /include/ "qoriq-fman3-0-1g-2.dtsi" |
| /include/ "qoriq-fman3-0-1g-3.dtsi" |
| fman@400000 { |
| interrupts = <96 2 0 0>, <16 2 1 30>; |
| |
| muram@0 { |
| compatible = "fsl,fman-muram"; |
| reg = <0x0 0x80000>; |
| }; |
| |
| enet0: ethernet@e0000 { |
| }; |
| |
| enet1: ethernet@e2000 { |
| }; |
| |
| enet2: ethernet@e4000 { |
| }; |
| |
| enet3: ethernet@e6000 { |
| }; |
| |
| mdio@fc000 { |
| interrupts = <100 1 0 0>; |
| }; |
| |
| mdio@fd000 { |
| interrupts = <101 1 0 0>; |
| }; |
| }; |
| }; |
