| // SPDX-License-Identifier: GPL-2.0 |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/cpu.h> |
| #include <asm/nospec-branch.h> |
| |
| static int __init nobp_setup_early(char *str) |
| { |
| bool enabled; |
| int rc; |
| |
| rc = kstrtobool(str, &enabled); |
| if (rc) |
| return rc; |
| if (enabled && test_facility(82)) { |
| /* |
| * The user explicitly requested nobp=1, enable it and |
| * disable the expoline support. |
| */ |
| __set_facility(82, alt_stfle_fac_list); |
| if (IS_ENABLED(CONFIG_EXPOLINE)) |
| nospec_disable = 1; |
| } else { |
| __clear_facility(82, alt_stfle_fac_list); |
| } |
| return 0; |
| } |
| early_param("nobp", nobp_setup_early); |
| |
| static int __init nospec_setup_early(char *str) |
| { |
| __clear_facility(82, alt_stfle_fac_list); |
| return 0; |
| } |
| early_param("nospec", nospec_setup_early); |
| |
| static int __init nospec_report(void) |
| { |
| if (test_facility(156)) |
| pr_info("Spectre V2 mitigation: etokens\n"); |
| if (nospec_uses_trampoline()) |
| pr_info("Spectre V2 mitigation: execute trampolines\n"); |
| if (__test_facility(82, alt_stfle_fac_list)) |
| pr_info("Spectre V2 mitigation: limited branch prediction\n"); |
| return 0; |
| } |
| arch_initcall(nospec_report); |
| |
| #ifdef CONFIG_EXPOLINE |
| |
| int nospec_disable = IS_ENABLED(CONFIG_EXPOLINE_OFF); |
| |
| static int __init nospectre_v2_setup_early(char *str) |
| { |
| nospec_disable = 1; |
| return 0; |
| } |
| early_param("nospectre_v2", nospectre_v2_setup_early); |
| |
| void __init nospec_auto_detect(void) |
| { |
| if (test_facility(156) || cpu_mitigations_off()) { |
| /* |
| * The machine supports etokens. |
| * Disable expolines and disable nobp. |
| */ |
| if (__is_defined(CC_USING_EXPOLINE)) |
| nospec_disable = 1; |
| __clear_facility(82, alt_stfle_fac_list); |
| } else if (__is_defined(CC_USING_EXPOLINE)) { |
| /* |
| * The kernel has been compiled with expolines. |
| * Keep expolines enabled and disable nobp. |
| */ |
| nospec_disable = 0; |
| __clear_facility(82, alt_stfle_fac_list); |
| } |
| /* |
| * If the kernel has not been compiled with expolines the |
| * nobp setting decides what is done, this depends on the |
| * CONFIG_KERNEL_NP option and the nobp/nospec parameters. |
| */ |
| } |
| |
| static int __init spectre_v2_setup_early(char *str) |
| { |
| if (str && !strncmp(str, "on", 2)) { |
| nospec_disable = 0; |
| __clear_facility(82, alt_stfle_fac_list); |
| } |
| if (str && !strncmp(str, "off", 3)) |
| nospec_disable = 1; |
| if (str && !strncmp(str, "auto", 4)) |
| nospec_auto_detect(); |
| return 0; |
| } |
| early_param("spectre_v2", spectre_v2_setup_early); |
| |
| static void __init_or_module __nospec_revert(s32 *start, s32 *end) |
| { |
| enum { BRCL_EXPOLINE, BRASL_EXPOLINE } type; |
| static const u8 branch[] = { 0x47, 0x00, 0x07, 0x00 }; |
| u8 *instr, *thunk, *br; |
| u8 insnbuf[6]; |
| s32 *epo; |
| |
| /* Second part of the instruction replace is always a nop */ |
| memcpy(insnbuf + 2, branch, sizeof(branch)); |
| for (epo = start; epo < end; epo++) { |
| instr = (u8 *) epo + *epo; |
| if (instr[0] == 0xc0 && (instr[1] & 0x0f) == 0x04) |
| type = BRCL_EXPOLINE; /* brcl instruction */ |
| else if (instr[0] == 0xc0 && (instr[1] & 0x0f) == 0x05) |
| type = BRASL_EXPOLINE; /* brasl instruction */ |
| else |
| continue; |
| thunk = instr + (*(int *)(instr + 2)) * 2; |
| if (thunk[0] == 0xc6 && thunk[1] == 0x00) |
| /* exrl %r0,<target-br> */ |
| br = thunk + (*(int *)(thunk + 2)) * 2; |
| else |
| continue; |
| if (br[0] != 0x07 || (br[1] & 0xf0) != 0xf0) |
| continue; |
| switch (type) { |
| case BRCL_EXPOLINE: |
| /* brcl to thunk, replace with br + nop */ |
| insnbuf[0] = br[0]; |
| insnbuf[1] = (instr[1] & 0xf0) | (br[1] & 0x0f); |
| break; |
| case BRASL_EXPOLINE: |
| /* brasl to thunk, replace with basr + nop */ |
| insnbuf[0] = 0x0d; |
| insnbuf[1] = (instr[1] & 0xf0) | (br[1] & 0x0f); |
| break; |
| } |
| |
| s390_kernel_write(instr, insnbuf, 6); |
| } |
| } |
| |
| void __init_or_module nospec_revert(s32 *start, s32 *end) |
| { |
| if (nospec_disable) |
| __nospec_revert(start, end); |
| } |
| |
| extern s32 __nospec_call_start[], __nospec_call_end[]; |
| extern s32 __nospec_return_start[], __nospec_return_end[]; |
| void __init nospec_init_branches(void) |
| { |
| nospec_revert(__nospec_call_start, __nospec_call_end); |
| nospec_revert(__nospec_return_start, __nospec_return_end); |
| } |
| |
| #endif /* CONFIG_EXPOLINE */ |