| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2021, The Linux Foundation. All rights reserved. |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_clock.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/module.h> |
| #include <linux/of_address.h> |
| #include <linux/regmap.h> |
| |
| #include <dt-bindings/clock/qcom,lpass-sc7280.h> |
| |
| #include "clk-regmap.h" |
| #include "clk-branch.h" |
| #include "common.h" |
| |
| static struct clk_branch lpass_top_cc_lpi_q6_axim_hs_clk = { |
| .halt_reg = 0x0, |
| .halt_check = BRANCH_HALT, |
| .clkr = { |
| .enable_reg = 0x0, |
| .enable_mask = BIT(0), |
| .hw.init = &(struct clk_init_data){ |
| .name = "lpass_top_cc_lpi_q6_axim_hs_clk", |
| .ops = &clk_branch2_ops, |
| }, |
| }, |
| }; |
| |
| static struct clk_branch lpass_qdsp6ss_core_clk = { |
| .halt_reg = 0x20, |
| /* CLK_OFF would not toggle until LPASS is out of reset */ |
| .halt_check = BRANCH_HALT_SKIP, |
| .clkr = { |
| .enable_reg = 0x20, |
| .enable_mask = BIT(0), |
| .hw.init = &(struct clk_init_data){ |
| .name = "lpass_qdsp6ss_core_clk", |
| .ops = &clk_branch2_ops, |
| }, |
| }, |
| }; |
| |
| static struct clk_branch lpass_qdsp6ss_xo_clk = { |
| .halt_reg = 0x38, |
| /* CLK_OFF would not toggle until LPASS is out of reset */ |
| .halt_check = BRANCH_HALT_SKIP, |
| .clkr = { |
| .enable_reg = 0x38, |
| .enable_mask = BIT(0), |
| .hw.init = &(struct clk_init_data){ |
| .name = "lpass_qdsp6ss_xo_clk", |
| .ops = &clk_branch2_ops, |
| }, |
| }, |
| }; |
| |
| static struct clk_branch lpass_qdsp6ss_sleep_clk = { |
| .halt_reg = 0x3c, |
| /* CLK_OFF would not toggle until LPASS is out of reset */ |
| .halt_check = BRANCH_HALT_SKIP, |
| .clkr = { |
| .enable_reg = 0x3c, |
| .enable_mask = BIT(0), |
| .hw.init = &(struct clk_init_data){ |
| .name = "lpass_qdsp6ss_sleep_clk", |
| .ops = &clk_branch2_ops, |
| }, |
| }, |
| }; |
| |
| static struct regmap_config lpass_regmap_config = { |
| .reg_bits = 32, |
| .reg_stride = 4, |
| .val_bits = 32, |
| .fast_io = true, |
| }; |
| |
| static struct clk_regmap *lpass_cc_top_sc7280_clocks[] = { |
| [LPASS_TOP_CC_LPI_Q6_AXIM_HS_CLK] = |
| &lpass_top_cc_lpi_q6_axim_hs_clk.clkr, |
| }; |
| |
| static const struct qcom_cc_desc lpass_cc_top_sc7280_desc = { |
| .config = &lpass_regmap_config, |
| .clks = lpass_cc_top_sc7280_clocks, |
| .num_clks = ARRAY_SIZE(lpass_cc_top_sc7280_clocks), |
| }; |
| |
| static struct clk_regmap *lpass_qdsp6ss_sc7280_clocks[] = { |
| [LPASS_QDSP6SS_XO_CLK] = &lpass_qdsp6ss_xo_clk.clkr, |
| [LPASS_QDSP6SS_SLEEP_CLK] = &lpass_qdsp6ss_sleep_clk.clkr, |
| [LPASS_QDSP6SS_CORE_CLK] = &lpass_qdsp6ss_core_clk.clkr, |
| }; |
| |
| static const struct qcom_cc_desc lpass_qdsp6ss_sc7280_desc = { |
| .config = &lpass_regmap_config, |
| .clks = lpass_qdsp6ss_sc7280_clocks, |
| .num_clks = ARRAY_SIZE(lpass_qdsp6ss_sc7280_clocks), |
| }; |
| |
| static int lpass_cc_sc7280_probe(struct platform_device *pdev) |
| { |
| const struct qcom_cc_desc *desc; |
| int ret; |
| |
| ret = devm_pm_runtime_enable(&pdev->dev); |
| if (ret) |
| return ret; |
| |
| ret = pm_clk_create(&pdev->dev); |
| if (ret) |
| return ret; |
| |
| ret = pm_clk_add(&pdev->dev, "iface"); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed to acquire iface clock\n"); |
| goto err_destroy_pm_clk; |
| } |
| |
| ret = pm_runtime_resume_and_get(&pdev->dev); |
| if (ret) |
| goto err_destroy_pm_clk; |
| |
| if (!of_property_read_bool(pdev->dev.of_node, "qcom,adsp-pil-mode")) { |
| lpass_regmap_config.name = "qdsp6ss"; |
| lpass_regmap_config.max_register = 0x3f; |
| desc = &lpass_qdsp6ss_sc7280_desc; |
| |
| ret = qcom_cc_probe_by_index(pdev, 0, desc); |
| if (ret) |
| goto err_put_rpm; |
| } |
| |
| lpass_regmap_config.name = "top_cc"; |
| lpass_regmap_config.max_register = 0x4; |
| desc = &lpass_cc_top_sc7280_desc; |
| |
| ret = qcom_cc_probe_by_index(pdev, 1, desc); |
| if (ret) |
| goto err_put_rpm; |
| |
| pm_runtime_put(&pdev->dev); |
| |
| return 0; |
| |
| err_put_rpm: |
| pm_runtime_put_sync(&pdev->dev); |
| err_destroy_pm_clk: |
| pm_clk_destroy(&pdev->dev); |
| |
| return ret; |
| } |
| |
| static const struct of_device_id lpass_cc_sc7280_match_table[] = { |
| { .compatible = "qcom,sc7280-lpasscc" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, lpass_cc_sc7280_match_table); |
| |
| static struct platform_driver lpass_cc_sc7280_driver = { |
| .probe = lpass_cc_sc7280_probe, |
| .driver = { |
| .name = "sc7280-lpasscc", |
| .of_match_table = lpass_cc_sc7280_match_table, |
| }, |
| }; |
| |
| static int __init lpass_cc_sc7280_init(void) |
| { |
| return platform_driver_register(&lpass_cc_sc7280_driver); |
| } |
| subsys_initcall(lpass_cc_sc7280_init); |
| |
| static void __exit lpass_cc_sc7280_exit(void) |
| { |
| platform_driver_unregister(&lpass_cc_sc7280_driver); |
| } |
| module_exit(lpass_cc_sc7280_exit); |
| |
| MODULE_DESCRIPTION("QTI LPASS_CC SC7280 Driver"); |
| MODULE_LICENSE("GPL v2"); |