| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * R-Car Gen3 HDMI PHY |
| * |
| * Copyright (C) 2016 Renesas Electronics Corporation |
| * |
| * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) |
| */ |
| |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| |
| #include <drm/bridge/dw_hdmi.h> |
| #include <drm/drm_modes.h> |
| |
| #define RCAR_HDMI_PHY_OPMODE_PLLCFG 0x06 /* Mode of operation and PLL dividers */ |
| #define RCAR_HDMI_PHY_PLLCURRGMPCTRL 0x10 /* PLL current and Gmp (conductance) */ |
| #define RCAR_HDMI_PHY_PLLDIVCTRL 0x11 /* PLL dividers */ |
| |
| struct rcar_hdmi_phy_params { |
| unsigned long mpixelclock; |
| u16 opmode_div; /* Mode of operation and PLL dividers */ |
| u16 curr_gmp; /* PLL current and Gmp (conductance) */ |
| u16 div; /* PLL dividers */ |
| }; |
| |
| static const struct rcar_hdmi_phy_params rcar_hdmi_phy_params[] = { |
| { 35500000, 0x0003, 0x0344, 0x0328 }, |
| { 44900000, 0x0003, 0x0285, 0x0128 }, |
| { 71000000, 0x0002, 0x1184, 0x0314 }, |
| { 90000000, 0x0002, 0x1144, 0x0114 }, |
| { 140250000, 0x0001, 0x20c4, 0x030a }, |
| { 182750000, 0x0001, 0x2084, 0x010a }, |
| { 281250000, 0x0000, 0x0084, 0x0305 }, |
| { 297000000, 0x0000, 0x0084, 0x0105 }, |
| { ~0UL, 0x0000, 0x0000, 0x0000 }, |
| }; |
| |
| static enum drm_mode_status |
| rcar_hdmi_mode_valid(struct dw_hdmi *hdmi, void *data, |
| const struct drm_display_info *info, |
| const struct drm_display_mode *mode) |
| { |
| /* |
| * The maximum supported clock frequency is 297 MHz, as shown in the PHY |
| * parameters table. |
| */ |
| if (mode->clock > 297000) |
| return MODE_CLOCK_HIGH; |
| |
| return MODE_OK; |
| } |
| |
| static int rcar_hdmi_phy_configure(struct dw_hdmi *hdmi, void *data, |
| unsigned long mpixelclock) |
| { |
| const struct rcar_hdmi_phy_params *params = rcar_hdmi_phy_params; |
| |
| for (; params->mpixelclock != ~0UL; ++params) { |
| if (mpixelclock <= params->mpixelclock) |
| break; |
| } |
| |
| if (params->mpixelclock == ~0UL) |
| return -EINVAL; |
| |
| dw_hdmi_phy_i2c_write(hdmi, params->opmode_div, |
| RCAR_HDMI_PHY_OPMODE_PLLCFG); |
| dw_hdmi_phy_i2c_write(hdmi, params->curr_gmp, |
| RCAR_HDMI_PHY_PLLCURRGMPCTRL); |
| dw_hdmi_phy_i2c_write(hdmi, params->div, RCAR_HDMI_PHY_PLLDIVCTRL); |
| |
| return 0; |
| } |
| |
| static const struct dw_hdmi_plat_data rcar_dw_hdmi_plat_data = { |
| .output_port = 1, |
| .mode_valid = rcar_hdmi_mode_valid, |
| .configure_phy = rcar_hdmi_phy_configure, |
| }; |
| |
| static int rcar_dw_hdmi_probe(struct platform_device *pdev) |
| { |
| struct dw_hdmi *hdmi; |
| |
| hdmi = dw_hdmi_probe(pdev, &rcar_dw_hdmi_plat_data); |
| if (IS_ERR(hdmi)) |
| return PTR_ERR(hdmi); |
| |
| platform_set_drvdata(pdev, hdmi); |
| |
| return 0; |
| } |
| |
| static void rcar_dw_hdmi_remove(struct platform_device *pdev) |
| { |
| struct dw_hdmi *hdmi = platform_get_drvdata(pdev); |
| |
| dw_hdmi_remove(hdmi); |
| } |
| |
| static const struct of_device_id rcar_dw_hdmi_of_table[] = { |
| { .compatible = "renesas,rcar-gen3-hdmi" }, |
| { /* Sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, rcar_dw_hdmi_of_table); |
| |
| static struct platform_driver rcar_dw_hdmi_platform_driver = { |
| .probe = rcar_dw_hdmi_probe, |
| .remove_new = rcar_dw_hdmi_remove, |
| .driver = { |
| .name = "rcar-dw-hdmi", |
| .of_match_table = rcar_dw_hdmi_of_table, |
| }, |
| }; |
| |
| module_platform_driver(rcar_dw_hdmi_platform_driver); |
| |
| MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); |
| MODULE_DESCRIPTION("Renesas R-Car Gen3 HDMI Encoder Driver"); |
| MODULE_LICENSE("GPL"); |