| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * i2c-stm32.c |
| * |
| * Copyright (C) M'boumba Cedric Madianga 2017 |
| * Author: M'boumba Cedric Madianga <cedric.madianga@gmail.com> |
| */ |
| |
| #include "i2c-stm32.h" |
| |
| /* Functions for DMA support */ |
| struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev, |
| dma_addr_t phy_addr, |
| u32 txdr_offset, |
| u32 rxdr_offset) |
| { |
| struct stm32_i2c_dma *dma; |
| struct dma_slave_config dma_sconfig; |
| int ret; |
| |
| dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL); |
| if (!dma) |
| return ERR_PTR(-ENOMEM); |
| |
| /* Request and configure I2C TX dma channel */ |
| dma->chan_tx = dma_request_chan(dev, "tx"); |
| if (IS_ERR(dma->chan_tx)) { |
| ret = PTR_ERR(dma->chan_tx); |
| if (ret != -ENODEV) |
| ret = dev_err_probe(dev, ret, |
| "can't request DMA tx channel\n"); |
| goto fail_al; |
| } |
| |
| memset(&dma_sconfig, 0, sizeof(dma_sconfig)); |
| dma_sconfig.dst_addr = phy_addr + txdr_offset; |
| dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; |
| dma_sconfig.dst_maxburst = 1; |
| dma_sconfig.direction = DMA_MEM_TO_DEV; |
| ret = dmaengine_slave_config(dma->chan_tx, &dma_sconfig); |
| if (ret < 0) { |
| dev_err(dev, "can't configure tx channel\n"); |
| goto fail_tx; |
| } |
| |
| /* Request and configure I2C RX dma channel */ |
| dma->chan_rx = dma_request_chan(dev, "rx"); |
| if (IS_ERR(dma->chan_rx)) { |
| ret = PTR_ERR(dma->chan_rx); |
| if (ret != -ENODEV) |
| ret = dev_err_probe(dev, ret, |
| "can't request DMA rx channel\n"); |
| |
| goto fail_tx; |
| } |
| |
| memset(&dma_sconfig, 0, sizeof(dma_sconfig)); |
| dma_sconfig.src_addr = phy_addr + rxdr_offset; |
| dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; |
| dma_sconfig.src_maxburst = 1; |
| dma_sconfig.direction = DMA_DEV_TO_MEM; |
| ret = dmaengine_slave_config(dma->chan_rx, &dma_sconfig); |
| if (ret < 0) { |
| dev_err(dev, "can't configure rx channel\n"); |
| goto fail_rx; |
| } |
| |
| init_completion(&dma->dma_complete); |
| |
| dev_info(dev, "using %s (tx) and %s (rx) for DMA transfers\n", |
| dma_chan_name(dma->chan_tx), dma_chan_name(dma->chan_rx)); |
| |
| return dma; |
| |
| fail_rx: |
| dma_release_channel(dma->chan_rx); |
| fail_tx: |
| dma_release_channel(dma->chan_tx); |
| fail_al: |
| devm_kfree(dev, dma); |
| |
| return ERR_PTR(ret); |
| } |
| |
| void stm32_i2c_dma_free(struct stm32_i2c_dma *dma) |
| { |
| dma->dma_buf = 0; |
| dma->dma_len = 0; |
| |
| dma_release_channel(dma->chan_tx); |
| dma->chan_tx = NULL; |
| |
| dma_release_channel(dma->chan_rx); |
| dma->chan_rx = NULL; |
| |
| dma->chan_using = NULL; |
| } |
| |
| int stm32_i2c_prep_dma_xfer(struct device *dev, struct stm32_i2c_dma *dma, |
| bool rd_wr, u32 len, u8 *buf, |
| dma_async_tx_callback callback, |
| void *dma_async_param) |
| { |
| struct dma_async_tx_descriptor *txdesc; |
| struct device *chan_dev; |
| int ret; |
| |
| if (rd_wr) { |
| dma->chan_using = dma->chan_rx; |
| dma->dma_transfer_dir = DMA_DEV_TO_MEM; |
| dma->dma_data_dir = DMA_FROM_DEVICE; |
| } else { |
| dma->chan_using = dma->chan_tx; |
| dma->dma_transfer_dir = DMA_MEM_TO_DEV; |
| dma->dma_data_dir = DMA_TO_DEVICE; |
| } |
| |
| dma->dma_len = len; |
| chan_dev = dma->chan_using->device->dev; |
| |
| dma->dma_buf = dma_map_single(chan_dev, buf, dma->dma_len, |
| dma->dma_data_dir); |
| if (dma_mapping_error(chan_dev, dma->dma_buf)) { |
| dev_err(dev, "DMA mapping failed\n"); |
| return -EINVAL; |
| } |
| |
| txdesc = dmaengine_prep_slave_single(dma->chan_using, dma->dma_buf, |
| dma->dma_len, |
| dma->dma_transfer_dir, |
| DMA_PREP_INTERRUPT); |
| if (!txdesc) { |
| dev_err(dev, "Not able to get desc for DMA xfer\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| reinit_completion(&dma->dma_complete); |
| |
| txdesc->callback = callback; |
| txdesc->callback_param = dma_async_param; |
| ret = dma_submit_error(dmaengine_submit(txdesc)); |
| if (ret < 0) { |
| dev_err(dev, "DMA submit failed\n"); |
| goto err; |
| } |
| |
| dma_async_issue_pending(dma->chan_using); |
| |
| return 0; |
| |
| err: |
| dma_unmap_single(chan_dev, dma->dma_buf, dma->dma_len, |
| dma->dma_data_dir); |
| return ret; |
| } |