| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * TSC-40 serial touchscreen driver. It should be compatible with |
| * TSC-10 and 25. |
| * |
| * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/input.h> |
| #include <linux/serio.h> |
| |
| #define PACKET_LENGTH 5 |
| struct tsc_ser { |
| struct input_dev *dev; |
| struct serio *serio; |
| u32 idx; |
| unsigned char data[PACKET_LENGTH]; |
| char phys[32]; |
| }; |
| |
| static void tsc_process_data(struct tsc_ser *ptsc) |
| { |
| struct input_dev *dev = ptsc->dev; |
| u8 *data = ptsc->data; |
| u32 x; |
| u32 y; |
| |
| x = ((data[1] & 0x03) << 8) | data[2]; |
| y = ((data[3] & 0x03) << 8) | data[4]; |
| |
| input_report_abs(dev, ABS_X, x); |
| input_report_abs(dev, ABS_Y, y); |
| input_report_key(dev, BTN_TOUCH, 1); |
| |
| input_sync(dev); |
| } |
| |
| static irqreturn_t tsc_interrupt(struct serio *serio, |
| unsigned char data, unsigned int flags) |
| { |
| struct tsc_ser *ptsc = serio_get_drvdata(serio); |
| struct input_dev *dev = ptsc->dev; |
| |
| ptsc->data[ptsc->idx] = data; |
| switch (ptsc->idx++) { |
| case 0: |
| if (unlikely((data & 0x3e) != 0x10)) { |
| dev_dbg(&serio->dev, |
| "unsynchronized packet start (0x%02x)\n", data); |
| ptsc->idx = 0; |
| } else if (!(data & 0x01)) { |
| input_report_key(dev, BTN_TOUCH, 0); |
| input_sync(dev); |
| ptsc->idx = 0; |
| } |
| break; |
| |
| case 1: |
| case 3: |
| if (unlikely(data & 0xfc)) { |
| dev_dbg(&serio->dev, |
| "unsynchronized data 0x%02x at offset %d\n", |
| data, ptsc->idx - 1); |
| ptsc->idx = 0; |
| } |
| break; |
| |
| case 4: |
| tsc_process_data(ptsc); |
| ptsc->idx = 0; |
| break; |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int tsc_connect(struct serio *serio, struct serio_driver *drv) |
| { |
| struct tsc_ser *ptsc; |
| struct input_dev *input_dev; |
| int error; |
| |
| ptsc = kzalloc(sizeof(struct tsc_ser), GFP_KERNEL); |
| input_dev = input_allocate_device(); |
| if (!ptsc || !input_dev) { |
| error = -ENOMEM; |
| goto fail1; |
| } |
| |
| ptsc->serio = serio; |
| ptsc->dev = input_dev; |
| snprintf(ptsc->phys, sizeof(ptsc->phys), "%s/input0", serio->phys); |
| |
| input_dev->name = "TSC-10/25/40 Serial TouchScreen"; |
| input_dev->phys = ptsc->phys; |
| input_dev->id.bustype = BUS_RS232; |
| input_dev->id.vendor = SERIO_TSC40; |
| input_dev->id.product = 40; |
| input_dev->id.version = 0x0001; |
| input_dev->dev.parent = &serio->dev; |
| |
| input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); |
| __set_bit(BTN_TOUCH, input_dev->keybit); |
| input_set_abs_params(ptsc->dev, ABS_X, 0, 0x3ff, 0, 0); |
| input_set_abs_params(ptsc->dev, ABS_Y, 0, 0x3ff, 0, 0); |
| |
| serio_set_drvdata(serio, ptsc); |
| |
| error = serio_open(serio, drv); |
| if (error) |
| goto fail2; |
| |
| error = input_register_device(ptsc->dev); |
| if (error) |
| goto fail3; |
| |
| return 0; |
| |
| fail3: |
| serio_close(serio); |
| fail2: |
| serio_set_drvdata(serio, NULL); |
| fail1: |
| input_free_device(input_dev); |
| kfree(ptsc); |
| return error; |
| } |
| |
| static void tsc_disconnect(struct serio *serio) |
| { |
| struct tsc_ser *ptsc = serio_get_drvdata(serio); |
| |
| serio_close(serio); |
| |
| input_unregister_device(ptsc->dev); |
| kfree(ptsc); |
| |
| serio_set_drvdata(serio, NULL); |
| } |
| |
| static const struct serio_device_id tsc_serio_ids[] = { |
| { |
| .type = SERIO_RS232, |
| .proto = SERIO_TSC40, |
| .id = SERIO_ANY, |
| .extra = SERIO_ANY, |
| }, |
| { 0 } |
| }; |
| MODULE_DEVICE_TABLE(serio, tsc_serio_ids); |
| |
| #define DRIVER_DESC "TSC-10/25/40 serial touchscreen driver" |
| |
| static struct serio_driver tsc_drv = { |
| .driver = { |
| .name = "tsc40", |
| }, |
| .description = DRIVER_DESC, |
| .id_table = tsc_serio_ids, |
| .interrupt = tsc_interrupt, |
| .connect = tsc_connect, |
| .disconnect = tsc_disconnect, |
| }; |
| |
| module_serio_driver(tsc_drv); |
| |
| MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>"); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL v2"); |