| // SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause |
| /* |
| * Copyright (c) 2011, 2012, Atheros Communications Inc. |
| * Copyright (c) 2014, I2SE GmbH |
| */ |
| |
| /* Atheros ethernet framing. Every Ethernet frame is surrounded |
| * by an atheros frame while transmitted over a serial channel; |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| |
| #include "qca_7k_common.h" |
| |
| u16 |
| qcafrm_create_header(u8 *buf, u16 length) |
| { |
| __le16 len; |
| |
| if (!buf) |
| return 0; |
| |
| len = cpu_to_le16(length); |
| |
| buf[0] = 0xAA; |
| buf[1] = 0xAA; |
| buf[2] = 0xAA; |
| buf[3] = 0xAA; |
| buf[4] = len & 0xff; |
| buf[5] = (len >> 8) & 0xff; |
| buf[6] = 0; |
| buf[7] = 0; |
| |
| return QCAFRM_HEADER_LEN; |
| } |
| EXPORT_SYMBOL_GPL(qcafrm_create_header); |
| |
| u16 |
| qcafrm_create_footer(u8 *buf) |
| { |
| if (!buf) |
| return 0; |
| |
| buf[0] = 0x55; |
| buf[1] = 0x55; |
| return QCAFRM_FOOTER_LEN; |
| } |
| EXPORT_SYMBOL_GPL(qcafrm_create_footer); |
| |
| /* Gather received bytes and try to extract a full ethernet frame by |
| * following a simple state machine. |
| * |
| * Return: QCAFRM_GATHER No ethernet frame fully received yet. |
| * QCAFRM_NOHEAD Header expected but not found. |
| * QCAFRM_INVLEN Atheros frame length is invalid |
| * QCAFRM_NOTAIL Footer expected but not found. |
| * > 0 Number of byte in the fully received |
| * Ethernet frame |
| */ |
| |
| s32 |
| qcafrm_fsm_decode(struct qcafrm_handle *handle, u8 *buf, u16 buf_len, u8 recv_byte) |
| { |
| s32 ret = QCAFRM_GATHER; |
| u16 len; |
| |
| switch (handle->state) { |
| case QCAFRM_HW_LEN0: |
| case QCAFRM_HW_LEN1: |
| /* by default, just go to next state */ |
| handle->state--; |
| |
| if (recv_byte != 0x00) { |
| /* first two bytes of length must be 0 */ |
| handle->state = handle->init; |
| } |
| break; |
| case QCAFRM_HW_LEN2: |
| case QCAFRM_HW_LEN3: |
| handle->state--; |
| break; |
| /* 4 bytes header pattern */ |
| case QCAFRM_WAIT_AA1: |
| case QCAFRM_WAIT_AA2: |
| case QCAFRM_WAIT_AA3: |
| case QCAFRM_WAIT_AA4: |
| if (recv_byte != 0xAA) { |
| ret = QCAFRM_NOHEAD; |
| handle->state = handle->init; |
| } else { |
| handle->state--; |
| } |
| break; |
| /* 2 bytes length. */ |
| /* Borrow offset field to hold length for now. */ |
| case QCAFRM_WAIT_LEN_BYTE0: |
| handle->offset = recv_byte; |
| handle->state = QCAFRM_WAIT_LEN_BYTE1; |
| break; |
| case QCAFRM_WAIT_LEN_BYTE1: |
| handle->offset = handle->offset | (recv_byte << 8); |
| handle->state = QCAFRM_WAIT_RSVD_BYTE1; |
| break; |
| case QCAFRM_WAIT_RSVD_BYTE1: |
| handle->state = QCAFRM_WAIT_RSVD_BYTE2; |
| break; |
| case QCAFRM_WAIT_RSVD_BYTE2: |
| len = handle->offset; |
| if (len > buf_len || len < QCAFRM_MIN_LEN) { |
| ret = QCAFRM_INVLEN; |
| handle->state = handle->init; |
| } else { |
| handle->state = (enum qcafrm_state)(len + 1); |
| /* Remaining number of bytes. */ |
| handle->offset = 0; |
| } |
| break; |
| default: |
| /* Receiving Ethernet frame itself. */ |
| buf[handle->offset] = recv_byte; |
| handle->offset++; |
| handle->state--; |
| break; |
| case QCAFRM_WAIT_551: |
| if (recv_byte != 0x55) { |
| ret = QCAFRM_NOTAIL; |
| handle->state = handle->init; |
| } else { |
| handle->state = QCAFRM_WAIT_552; |
| } |
| break; |
| case QCAFRM_WAIT_552: |
| if (recv_byte != 0x55) { |
| ret = QCAFRM_NOTAIL; |
| handle->state = handle->init; |
| } else { |
| ret = handle->offset; |
| /* Frame is fully received. */ |
| handle->state = handle->init; |
| } |
| break; |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(qcafrm_fsm_decode); |
| |
| MODULE_DESCRIPTION("Qualcomm Atheros QCA7000 common"); |
| MODULE_AUTHOR("Qualcomm Atheros Communications"); |
| MODULE_AUTHOR("Stefan Wahren <wahrenst@gmx.net>"); |
| MODULE_LICENSE("Dual BSD/GPL"); |