| /* |
| * Copyright (c) 2006 Damien Bergamini <damien.bergamini@free.fr> |
| * Copyright (c) 2006 Sam Leffler, Errno Consulting |
| * Copyright (c) 2007 Christoph Hellwig <hch@lst.de> |
| * Copyright (c) 2008-2009 Weongyo Jeong <weongyo@freebsd.org> |
| * Copyright (c) 2012 Pontus Fuchs <pontus.fuchs@gmail.com> |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #define AR5523_FLAG_PRE_FIRMWARE (1 << 0) |
| #define AR5523_FLAG_ABG (1 << 1) |
| |
| #define AR5523_FIRMWARE_FILE "ar5523.bin" |
| |
| #define AR5523_CMD_TX_PIPE 0x01 |
| #define AR5523_DATA_TX_PIPE 0x02 |
| #define AR5523_CMD_RX_PIPE 0x81 |
| #define AR5523_DATA_RX_PIPE 0x82 |
| |
| #define ar5523_cmd_tx_pipe(dev) \ |
| usb_sndbulkpipe((dev), AR5523_CMD_TX_PIPE) |
| #define ar5523_data_tx_pipe(dev) \ |
| usb_sndbulkpipe((dev), AR5523_DATA_TX_PIPE) |
| #define ar5523_cmd_rx_pipe(dev) \ |
| usb_rcvbulkpipe((dev), AR5523_CMD_RX_PIPE) |
| #define ar5523_data_rx_pipe(dev) \ |
| usb_rcvbulkpipe((dev), AR5523_DATA_RX_PIPE) |
| |
| #define AR5523_DATA_TIMEOUT 10000 |
| #define AR5523_CMD_TIMEOUT 1000 |
| |
| #define AR5523_TX_DATA_COUNT 8 |
| #define AR5523_TX_DATA_RESTART_COUNT 2 |
| #define AR5523_RX_DATA_COUNT 16 |
| #define AR5523_RX_DATA_REFILL_COUNT 8 |
| |
| #define AR5523_CMD_ID 1 |
| #define AR5523_DATA_ID 2 |
| |
| #define AR5523_TX_WD_TIMEOUT (HZ * 2) |
| #define AR5523_FLUSH_TIMEOUT (HZ * 3) |
| |
| enum AR5523_flags { |
| AR5523_HW_UP, |
| AR5523_USB_DISCONNECTED, |
| AR5523_CONNECTED |
| }; |
| |
| struct ar5523_tx_cmd { |
| struct ar5523 *ar; |
| struct urb *urb_tx; |
| void *buf_tx; |
| void *odata; |
| int olen; |
| int flags; |
| int res; |
| struct completion done; |
| }; |
| |
| /* This struct is placed in tx_info->driver_data. It must not be larger |
| * than IEEE80211_TX_INFO_DRIVER_DATA_SIZE. |
| */ |
| struct ar5523_tx_data { |
| struct list_head list; |
| struct ar5523 *ar; |
| struct urb *urb; |
| }; |
| |
| struct ar5523_rx_data { |
| struct list_head list; |
| struct ar5523 *ar; |
| struct urb *urb; |
| struct sk_buff *skb; |
| }; |
| |
| struct ar5523 { |
| struct usb_device *dev; |
| struct ieee80211_hw *hw; |
| |
| unsigned long flags; |
| struct mutex mutex; |
| struct workqueue_struct *wq; |
| |
| struct ar5523_tx_cmd tx_cmd; |
| |
| struct delayed_work stat_work; |
| |
| struct timer_list tx_wd_timer; |
| struct work_struct tx_wd_work; |
| struct work_struct tx_work; |
| struct list_head tx_queue_pending; |
| struct list_head tx_queue_submitted; |
| spinlock_t tx_data_list_lock; |
| wait_queue_head_t tx_flush_waitq; |
| |
| /* Queued + Submitted TX frames */ |
| atomic_t tx_nr_total; |
| |
| /* Submitted TX frames */ |
| atomic_t tx_nr_pending; |
| |
| void *rx_cmd_buf; |
| struct urb *rx_cmd_urb; |
| |
| struct ar5523_rx_data rx_data[AR5523_RX_DATA_COUNT]; |
| spinlock_t rx_data_list_lock; |
| struct list_head rx_data_free; |
| struct list_head rx_data_used; |
| atomic_t rx_data_free_cnt; |
| |
| struct work_struct rx_refill_work; |
| |
| unsigned int rxbufsz; |
| u8 serial[16]; |
| |
| struct ieee80211_channel channels[14]; |
| struct ieee80211_rate rates[12]; |
| struct ieee80211_supported_band band; |
| struct ieee80211_vif *vif; |
| }; |
| |
| /* flags for sending firmware commands */ |
| #define AR5523_CMD_FLAG_READ (1 << 1) |
| #define AR5523_CMD_FLAG_MAGIC (1 << 2) |
| |
| #define ar5523_dbg(ar, format, arg...) \ |
| dev_dbg(&(ar)->dev->dev, format, ## arg) |
| |
| /* On USB hot-unplug there can be a lot of URBs in flight and they'll all |
| * fail. Instead of dealing with them in every possible place just surpress |
| * any messages on USB disconnect. |
| */ |
| #define ar5523_err(ar, format, arg...) \ |
| do { \ |
| if (!test_bit(AR5523_USB_DISCONNECTED, &ar->flags)) { \ |
| dev_err(&(ar)->dev->dev, format, ## arg); \ |
| } \ |
| } while (0) |
| #define ar5523_info(ar, format, arg...) \ |
| dev_info(&(ar)->dev->dev, format, ## arg) |