blob: 8930589b4967d061fdc953720ced36f0a8221012 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com>
Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com>
Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com>
Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
Copyright (C) 2009 Bart Zolnierkiewicz <bzolnier@gmail.com>
<http://rt2x00.serialmonkey.com>
*/
/*
Module: rt2800
Abstract: Data structures and registers for the rt2800 modules.
Supported chipsets: RT2800E, RT2800ED & RT2800U.
*/
#ifndef RT2800_H
#define RT2800_H
/*
* RF chip defines.
*
* RF2820 2.4G 2T3R
* RF2850 2.4G/5G 2T3R
* RF2720 2.4G 1T2R
* RF2750 2.4G/5G 1T2R
* RF3020 2.4G 1T1R
* RF2020 2.4G B/G
* RF3021 2.4G 1T2R
* RF3022 2.4G 2T2R
* RF3052 2.4G/5G 2T2R
* RF2853 2.4G/5G 3T3R
* RF3320 2.4G 1T1R(RT3350/RT3370/RT3390)
* RF3322 2.4G 2T2R(RT3352/RT3371/RT3372/RT3391/RT3392)
* RF3053 2.4G/5G 3T3R(RT3563/RT3573/RT3593)
* RF3853 2.4G/5G 3T3R(RT3883/RT3662)
* RF5592 2.4G/5G 2T2R
* RF3070 2.4G 1T1R
* RF5360 2.4G 1T1R
* RF5362 2.4G 1T1R
* RF5370 2.4G 1T1R
* RF5390 2.4G 1T1R
*/
#define RF2820 0x0001
#define RF2850 0x0002
#define RF2720 0x0003
#define RF2750 0x0004
#define RF3020 0x0005
#define RF2020 0x0006
#define RF3021 0x0007
#define RF3022 0x0008
#define RF3052 0x0009
#define RF2853 0x000a
#define RF3320 0x000b
#define RF3322 0x000c
#define RF3053 0x000d
#define RF5592 0x000f
#define RF3070 0x3070
#define RF3290 0x3290
#define RF3853 0x3853
#define RF5350 0x5350
#define RF5360 0x5360
#define RF5362 0x5362
#define RF5370 0x5370
#define RF5372 0x5372
#define RF5390 0x5390
#define RF5392 0x5392
#define RF7620 0x7620
/*
* Chipset revisions.
*/
#define REV_RT2860C 0x0100
#define REV_RT2860D 0x0101
#define REV_RT2872E 0x0200
#define REV_RT3070E 0x0200
#define REV_RT3070F 0x0201
#define REV_RT3071E 0x0211
#define REV_RT3090E 0x0211
#define REV_RT3390E 0x0211
#define REV_RT3593E 0x0211
#define REV_RT5390F 0x0502
#define REV_RT5370G 0x0503
#define REV_RT5390R 0x1502
#define REV_RT5592C 0x0221
#define DEFAULT_RSSI_OFFSET 120
/*
* Register layout information.
*/
#define CSR_REG_BASE 0x1000
#define CSR_REG_SIZE 0x0800
#define EEPROM_BASE 0x0000
#define EEPROM_SIZE 0x0200
#define BBP_BASE 0x0000
#define BBP_SIZE 0x00ff
#define RF_BASE 0x0004
#define RF_SIZE 0x0010
#define RFCSR_BASE 0x0000
#define RFCSR_SIZE 0x0040
/*
* Number of TX queues.
*/
#define NUM_TX_QUEUES 4
/*
* Registers.
*/
/*
* MAC_CSR0_3290: MAC_CSR0 for RT3290 to identity MAC version number.
*/
#define MAC_CSR0_3290 0x0000
/*
* E2PROM_CSR: PCI EEPROM control register.
* RELOAD: Write 1 to reload eeprom content.
* TYPE: 0: 93c46, 1:93c66.
* LOAD_STATUS: 1:loading, 0:done.
*/
#define E2PROM_CSR 0x0004
#define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000001)
#define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000002)
#define E2PROM_CSR_DATA_IN FIELD32(0x00000004)
#define E2PROM_CSR_DATA_OUT FIELD32(0x00000008)
#define E2PROM_CSR_TYPE FIELD32(0x00000030)
#define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040)
#define E2PROM_CSR_RELOAD FIELD32(0x00000080)
/*
* CMB_CTRL_CFG
*/
#define CMB_CTRL 0x0020
#define AUX_OPT_BIT0 FIELD32(0x00000001)
#define AUX_OPT_BIT1 FIELD32(0x00000002)
#define AUX_OPT_BIT2 FIELD32(0x00000004)
#define AUX_OPT_BIT3 FIELD32(0x00000008)
#define AUX_OPT_BIT4 FIELD32(0x00000010)
#define AUX_OPT_BIT5 FIELD32(0x00000020)
#define AUX_OPT_BIT6 FIELD32(0x00000040)
#define AUX_OPT_BIT7 FIELD32(0x00000080)
#define AUX_OPT_BIT8 FIELD32(0x00000100)
#define AUX_OPT_BIT9 FIELD32(0x00000200)
#define AUX_OPT_BIT10 FIELD32(0x00000400)
#define AUX_OPT_BIT11 FIELD32(0x00000800)
#define AUX_OPT_BIT12 FIELD32(0x00001000)
#define AUX_OPT_BIT13 FIELD32(0x00002000)
#define AUX_OPT_BIT14 FIELD32(0x00004000)
#define AUX_OPT_BIT15 FIELD32(0x00008000)
#define LDO25_LEVEL FIELD32(0x00030000)
#define LDO25_LARGEA FIELD32(0x00040000)
#define LDO25_FRC_ON FIELD32(0x00080000)
#define CMB_RSV FIELD32(0x00300000)
#define XTAL_RDY FIELD32(0x00400000)
#define PLL_LD FIELD32(0x00800000)
#define LDO_CORE_LEVEL FIELD32(0x0F000000)
#define LDO_BGSEL FIELD32(0x30000000)
#define LDO3_EN FIELD32(0x40000000)
#define LDO0_EN FIELD32(0x80000000)
/*
* EFUSE_CSR_3290: RT3290 EEPROM
*/
#define EFUSE_CTRL_3290 0x0024
/*
* EFUSE_DATA3 of 3290
*/
#define EFUSE_DATA3_3290 0x0028
/*
* EFUSE_DATA2 of 3290
*/
#define EFUSE_DATA2_3290 0x002c
/*
* EFUSE_DATA1 of 3290
*/
#define EFUSE_DATA1_3290 0x0030
/*
* EFUSE_DATA0 of 3290
*/
#define EFUSE_DATA0_3290 0x0034
/*
* OSC_CTRL_CFG
* Ring oscillator configuration
*/
#define OSC_CTRL 0x0038
#define OSC_REF_CYCLE FIELD32(0x00001fff)
#define OSC_RSV FIELD32(0x0000e000)
#define OSC_CAL_CNT FIELD32(0x0fff0000)
#define OSC_CAL_ACK FIELD32(0x10000000)
#define OSC_CLK_32K_VLD FIELD32(0x20000000)
#define OSC_CAL_REQ FIELD32(0x40000000)
#define OSC_ROSC_EN FIELD32(0x80000000)
/*
* COEX_CFG_0
*/
#define COEX_CFG0 0x0040
#define COEX_CFG_ANT FIELD32(0xff000000)
/*
* COEX_CFG_1
*/
#define COEX_CFG1 0x0044
/*
* COEX_CFG_2
*/
#define COEX_CFG2 0x0048
#define BT_COEX_CFG1 FIELD32(0xff000000)
#define BT_COEX_CFG0 FIELD32(0x00ff0000)
#define WL_COEX_CFG1 FIELD32(0x0000ff00)
#define WL_COEX_CFG0 FIELD32(0x000000ff)
/*
* PLL_CTRL_CFG
* PLL configuration register
*/
#define PLL_CTRL 0x0050
#define PLL_RESERVED_INPUT1 FIELD32(0x000000ff)
#define PLL_RESERVED_INPUT2 FIELD32(0x0000ff00)
#define PLL_CONTROL FIELD32(0x00070000)
#define PLL_LPF_R1 FIELD32(0x00080000)
#define PLL_LPF_C1_CTRL FIELD32(0x00300000)
#define PLL_LPF_C2_CTRL FIELD32(0x00c00000)
#define PLL_CP_CURRENT_CTRL FIELD32(0x03000000)
#define PLL_PFD_DELAY_CTRL FIELD32(0x0c000000)
#define PLL_LOCK_CTRL FIELD32(0x70000000)
#define PLL_VBGBK_EN FIELD32(0x80000000)
/*
* WLAN_CTRL_CFG
* RT3290 wlan configuration
*/
#define WLAN_FUN_CTRL 0x0080
#define WLAN_EN FIELD32(0x00000001)
#define WLAN_CLK_EN FIELD32(0x00000002)
#define WLAN_RSV1 FIELD32(0x00000004)
#define WLAN_RESET FIELD32(0x00000008)
#define PCIE_APP0_CLK_REQ FIELD32(0x00000010)
#define FRC_WL_ANT_SET FIELD32(0x00000020)
#define INV_TR_SW0 FIELD32(0x00000040)
#define WLAN_GPIO_IN_BIT0 FIELD32(0x00000100)
#define WLAN_GPIO_IN_BIT1 FIELD32(0x00000200)
#define WLAN_GPIO_IN_BIT2 FIELD32(0x00000400)
#define WLAN_GPIO_IN_BIT3 FIELD32(0x00000800)
#define WLAN_GPIO_IN_BIT4 FIELD32(0x00001000)
#define WLAN_GPIO_IN_BIT5 FIELD32(0x00002000)
#define WLAN_GPIO_IN_BIT6 FIELD32(0x00004000)
#define WLAN_GPIO_IN_BIT7 FIELD32(0x00008000)
#define WLAN_GPIO_IN_BIT_ALL FIELD32(0x0000ff00)
#define WLAN_GPIO_OUT_BIT0 FIELD32(0x00010000)
#define WLAN_GPIO_OUT_BIT1 FIELD32(0x00020000)
#define WLAN_GPIO_OUT_BIT2 FIELD32(0x00040000)
#define WLAN_GPIO_OUT_BIT3 FIELD32(0x00050000)
#define WLAN_GPIO_OUT_BIT4 FIELD32(0x00100000)
#define WLAN_GPIO_OUT_BIT5 FIELD32(0x00200000)
#define WLAN_GPIO_OUT_BIT6 FIELD32(0x00400000)
#define WLAN_GPIO_OUT_BIT7 FIELD32(0x00800000)
#define WLAN_GPIO_OUT_BIT_ALL FIELD32(0x00ff0000)
#define WLAN_GPIO_OUT_OE_BIT0 FIELD32(0x01000000)
#define WLAN_GPIO_OUT_OE_BIT1 FIELD32(0x02000000)
#define WLAN_GPIO_OUT_OE_BIT2 FIELD32(0x04000000)
#define WLAN_GPIO_OUT_OE_BIT3 FIELD32(0x08000000)
#define WLAN_GPIO_OUT_OE_BIT4 FIELD32(0x10000000)
#define WLAN_GPIO_OUT_OE_BIT5 FIELD32(0x20000000)
#define WLAN_GPIO_OUT_OE_BIT6 FIELD32(0x40000000)
#define WLAN_GPIO_OUT_OE_BIT7 FIELD32(0x80000000)
#define WLAN_GPIO_OUT_OE_BIT_ALL FIELD32(0xff000000)
/*
* AUX_CTRL: Aux/PCI-E related configuration
*/
#define AUX_CTRL 0x10c
#define AUX_CTRL_WAKE_PCIE_EN FIELD32(0x00000002)
#define AUX_CTRL_FORCE_PCIE_CLK FIELD32(0x00000400)
/*
* OPT_14: Unknown register used by rt3xxx devices.
*/
#define OPT_14_CSR 0x0114
#define OPT_14_CSR_BIT0 FIELD32(0x00000001)
/*
* INT_SOURCE_CSR: Interrupt source register.
* Write one to clear corresponding bit.
* TX_FIFO_STATUS: FIFO Statistics is full, sw should read TX_STA_FIFO
*/
#define INT_SOURCE_CSR 0x0200
#define INT_SOURCE_CSR_RXDELAYINT FIELD32(0x00000001)
#define INT_SOURCE_CSR_TXDELAYINT FIELD32(0x00000002)
#define INT_SOURCE_CSR_RX_DONE FIELD32(0x00000004)
#define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00000008)
#define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00000010)
#define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00000020)
#define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00000040)
#define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00000080)
#define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00000100)
#define INT_SOURCE_CSR_MCU_COMMAND FIELD32(0x00000200)
#define INT_SOURCE_CSR_RXTX_COHERENT FIELD32(0x00000400)
#define INT_SOURCE_CSR_TBTT FIELD32(0x00000800)
#define INT_SOURCE_CSR_PRE_TBTT FIELD32(0x00001000)
#define INT_SOURCE_CSR_TX_FIFO_STATUS FIELD32(0x00002000)
#define INT_SOURCE_CSR_AUTO_WAKEUP FIELD32(0x00004000)
#define INT_SOURCE_CSR_GPTIMER FIELD32(0x00008000)
#define INT_SOURCE_CSR_RX_COHERENT FIELD32(0x00010000)
#define INT_SOURCE_CSR_TX_COHERENT FIELD32(0x00020000)
/*
* INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF.
*/
#define INT_MASK_CSR 0x0204
#define INT_MASK_CSR_RXDELAYINT FIELD32(0x00000001)
#define INT_MASK_CSR_TXDELAYINT FIELD32(0x00000002)
#define INT_MASK_CSR_RX_DONE FIELD32(0x00000004)
#define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00000008)
#define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00000010)
#define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00000020)
#define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00000040)
#define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00000080)
#define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00000100)
#define INT_MASK_CSR_MCU_COMMAND FIELD32(0x00000200)
#define INT_MASK_CSR_RXTX_COHERENT FIELD32(0x00000400)
#define INT_MASK_CSR_TBTT FIELD32(0x00000800)
#define INT_MASK_CSR_PRE_TBTT FIELD32(0x00001000)
#define INT_MASK_CSR_TX_FIFO_STATUS FIELD32(0x00002000)
#define INT_MASK_CSR_AUTO_WAKEUP FIELD32(0x00004000)
#define INT_MASK_CSR_GPTIMER FIELD32(0x00008000)
#define INT_MASK_CSR_RX_COHERENT FIELD32(0x00010000)
#define INT_MASK_CSR_TX_COHERENT FIELD32(0x00020000)
/*
* WPDMA_GLO_CFG
*/
#define WPDMA_GLO_CFG 0x0208
#define WPDMA_GLO_CFG_ENABLE_TX_DMA FIELD32(0x00000001)
#define WPDMA_GLO_CFG_TX_DMA_BUSY FIELD32(0x00000002)
#define WPDMA_GLO_CFG_ENABLE_RX_DMA FIELD32(0x00000004)
#define WPDMA_GLO_CFG_RX_DMA_BUSY FIELD32(0x00000008)
#define WPDMA_GLO_CFG_WP_DMA_BURST_SIZE FIELD32(0x00000030)
#define WPDMA_GLO_CFG_TX_WRITEBACK_DONE FIELD32(0x00000040)
#define WPDMA_GLO_CFG_BIG_ENDIAN FIELD32(0x00000080)
#define WPDMA_GLO_CFG_RX_HDR_SCATTER FIELD32(0x0000ff00)
#define WPDMA_GLO_CFG_HDR_SEG_LEN FIELD32(0xffff0000)
/*
* WPDMA_RST_IDX
*/
#define WPDMA_RST_IDX 0x020c
#define WPDMA_RST_IDX_DTX_IDX0 FIELD32(0x00000001)
#define WPDMA_RST_IDX_DTX_IDX1 FIELD32(0x00000002)
#define WPDMA_RST_IDX_DTX_IDX2 FIELD32(0x00000004)
#define WPDMA_RST_IDX_DTX_IDX3 FIELD32(0x00000008)
#define WPDMA_RST_IDX_DTX_IDX4 FIELD32(0x00000010)
#define WPDMA_RST_IDX_DTX_IDX5 FIELD32(0x00000020)
#define WPDMA_RST_IDX_DRX_IDX0 FIELD32(0x00010000)
/*
* DELAY_INT_CFG
*/
#define DELAY_INT_CFG 0x0210
#define DELAY_INT_CFG_RXMAX_PTIME FIELD32(0x000000ff)
#define DELAY_INT_CFG_RXMAX_PINT FIELD32(0x00007f00)
#define DELAY_INT_CFG_RXDLY_INT_EN FIELD32(0x00008000)
#define DELAY_INT_CFG_TXMAX_PTIME FIELD32(0x00ff0000)
#define DELAY_INT_CFG_TXMAX_PINT FIELD32(0x7f000000)
#define DELAY_INT_CFG_TXDLY_INT_EN FIELD32(0x80000000)
/*
* WMM_AIFSN_CFG: Aifsn for each EDCA AC
* AIFSN0: AC_VO
* AIFSN1: AC_VI
* AIFSN2: AC_BE
* AIFSN3: AC_BK
*/
#define WMM_AIFSN_CFG 0x0214
#define WMM_AIFSN_CFG_AIFSN0 FIELD32(0x0000000f)
#define WMM_AIFSN_CFG_AIFSN1 FIELD32(0x000000f0)
#define WMM_AIFSN_CFG_AIFSN2 FIELD32(0x00000f00)
#define WMM_AIFSN_CFG_AIFSN3 FIELD32(0x0000f000)
/*
* WMM_CWMIN_CSR: CWmin for each EDCA AC
* CWMIN0: AC_VO
* CWMIN1: AC_VI
* CWMIN2: AC_BE
* CWMIN3: AC_BK
*/
#define WMM_CWMIN_CFG 0x0218
#define WMM_CWMIN_CFG_CWMIN0 FIELD32(0x0000000f)
#define WMM_CWMIN_CFG_CWMIN1 FIELD32(0x000000f0)
#define WMM_CWMIN_CFG_CWMIN2 FIELD32(0x00000f00)
#define WMM_CWMIN_CFG_CWMIN3 FIELD32(0x0000f000)
/*
* WMM_CWMAX_CSR: CWmax for each EDCA AC
* CWMAX0: AC_VO
* CWMAX1: AC_VI
* CWMAX2: AC_BE
* CWMAX3: AC_BK
*/
#define WMM_CWMAX_CFG 0x021c
#define WMM_CWMAX_CFG_CWMAX0 FIELD32(0x0000000f)
#define WMM_CWMAX_CFG_CWMAX1 FIELD32(0x000000f0)
#define WMM_CWMAX_CFG_CWMAX2 FIELD32(0x00000f00)
#define WMM_CWMAX_CFG_CWMAX3 FIELD32(0x0000f000)
/*
* AC_TXOP0: AC_VO/AC_VI TXOP register
* AC0TXOP: AC_VO in unit of 32us
* AC1TXOP: AC_VI in unit of 32us
*/
#define WMM_TXOP0_CFG 0x0220
#define WMM_TXOP0_CFG_AC0TXOP FIELD32(0x0000ffff)
#define WMM_TXOP0_CFG_AC1TXOP FIELD32(0xffff0000)
/*
* AC_TXOP1: AC_BE/AC_BK TXOP register
* AC2TXOP: AC_BE in unit of 32us
* AC3TXOP: AC_BK in unit of 32us
*/
#define WMM_TXOP1_CFG 0x0224
#define WMM_TXOP1_CFG_AC2TXOP FIELD32(0x0000ffff)
#define WMM_TXOP1_CFG_AC3TXOP FIELD32(0xffff0000)
/*
* GPIO_CTRL:
* GPIO_CTRL_VALx: GPIO value
* GPIO_CTRL_DIRx: GPIO direction: 0 = output; 1 = input
*/
#define GPIO_CTRL 0x0228
#define GPIO_CTRL_VAL0 FIELD32(0x00000001)
#define GPIO_CTRL_VAL1 FIELD32(0x00000002)
#define GPIO_CTRL_VAL2 FIELD32(0x00000004)
#define GPIO_CTRL_VAL3 FIELD32(0x00000008)
#define GPIO_CTRL_VAL4 FIELD32(0x00000010)
#define GPIO_CTRL_VAL5 FIELD32(0x00000020)
#define GPIO_CTRL_VAL6 FIELD32(0x00000040)
#define GPIO_CTRL_VAL7 FIELD32(0x00000080)
#define GPIO_CTRL_DIR0 FIELD32(0x00000100)
#define GPIO_CTRL_DIR1 FIELD32(0x00000200)
#define GPIO_CTRL_DIR2 FIELD32(0x00000400)
#define GPIO_CTRL_DIR3 FIELD32(0x00000800)
#define GPIO_CTRL_DIR4 FIELD32(0x00001000)
#define GPIO_CTRL_DIR5 FIELD32(0x00002000)
#define GPIO_CTRL_DIR6 FIELD32(0x00004000)
#define GPIO_CTRL_DIR7 FIELD32(0x00008000)
#define GPIO_CTRL_VAL8 FIELD32(0x00010000)
#define GPIO_CTRL_VAL9 FIELD32(0x00020000)
#define GPIO_CTRL_VAL10 FIELD32(0x00040000)
#define GPIO_CTRL_DIR8 FIELD32(0x01000000)
#define GPIO_CTRL_DIR9 FIELD32(0x02000000)
#define GPIO_CTRL_DIR10 FIELD32(0x04000000)
/*
* MCU_CMD_CFG
*/
#define MCU_CMD_CFG 0x022c
/*
* AC_VO register offsets
*/
#define TX_BASE_PTR0 0x0230
#define TX_MAX_CNT0 0x0234
#define TX_CTX_IDX0 0x0238
#define TX_DTX_IDX0 0x023c
/*
* AC_VI register offsets
*/
#define TX_BASE_PTR1 0x0240
#define TX_MAX_CNT1 0x0244
#define TX_CTX_IDX1 0x0248
#define TX_DTX_IDX1 0x024c
/*
* AC_BE register offsets
*/
#define TX_BASE_PTR2 0x0250
#define TX_MAX_CNT2 0x0254
#define TX_CTX_IDX2 0x0258
#define TX_DTX_IDX2 0x025c
/*
* AC_BK register offsets
*/
#define TX_BASE_PTR3 0x0260
#define TX_MAX_CNT3 0x0264
#define TX_CTX_IDX3 0x0268
#define TX_DTX_IDX3 0x026c
/*
* HCCA register offsets
*/
#define TX_BASE_PTR4 0x0270
#define TX_MAX_CNT4 0x0274
#define TX_CTX_IDX4 0x0278
#define TX_DTX_IDX4 0x027c
/*
* MGMT register offsets
*/
#define TX_BASE_PTR5 0x0280
#define TX_MAX_CNT5 0x0284
#define TX_CTX_IDX5 0x0288
#define TX_DTX_IDX5 0x028c
/*
* RX register offsets
*/
#define RX_BASE_PTR 0x0290
#define RX_MAX_CNT 0x0294
#define RX_CRX_IDX 0x0298
#define RX_DRX_IDX 0x029c
/*
* USB_DMA_CFG
* RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns.
* RX_BULK_AGG_LIMIT: Rx Bulk Aggregation Limit in unit of 256 bytes.
* PHY_CLEAR: phy watch dog enable.
* TX_CLEAR: Clear USB DMA TX path.
* TXOP_HALT: Halt TXOP count down when TX buffer is full.
* RX_BULK_AGG_EN: Enable Rx Bulk Aggregation.
* RX_BULK_EN: Enable USB DMA Rx.
* TX_BULK_EN: Enable USB DMA Tx.
* EP_OUT_VALID: OUT endpoint data valid.
* RX_BUSY: USB DMA RX FSM busy.
* TX_BUSY: USB DMA TX FSM busy.
*/
#define USB_DMA_CFG 0x02a0
#define USB_DMA_CFG_RX_BULK_AGG_TIMEOUT FIELD32(0x000000ff)
#define USB_DMA_CFG_RX_BULK_AGG_LIMIT FIELD32(0x0000ff00)
#define USB_DMA_CFG_PHY_CLEAR FIELD32(0x00010000)
#define USB_DMA_CFG_TX_CLEAR FIELD32(0x00080000)
#define USB_DMA_CFG_TXOP_HALT FIELD32(0x00100000)
#define USB_DMA_CFG_RX_BULK_AGG_EN FIELD32(0x00200000)
#define USB_DMA_CFG_RX_BULK_EN FIELD32(0x00400000)
#define USB_DMA_CFG_TX_BULK_EN FIELD32(0x00800000)
#define USB_DMA_CFG_EP_OUT_VALID FIELD32(0x3f000000)
#define USB_DMA_CFG_RX_BUSY FIELD32(0x40000000)
#define USB_DMA_CFG_TX_BUSY FIELD32(0x80000000)
/*
* US_CYC_CNT
* BT_MODE_EN: Bluetooth mode enable
* CLOCK CYCLE: Clock cycle count in 1us.
* PCI:0x21, PCIE:0x7d, USB:0x1e
*/
#define US_CYC_CNT 0x02a4
#define US_CYC_CNT_BT_MODE_EN FIELD32(0x00000100)
#define US_CYC_CNT_CLOCK_CYCLE FIELD32(0x000000ff)
/*
* PBF_SYS_CTRL
* HOST_RAM_WRITE: enable Host program ram write selection
*/
#define PBF_SYS_CTRL 0x0400
#define PBF_SYS_CTRL_READY FIELD32(0x00000080)
#define PBF_SYS_CTRL_HOST_RAM_WRITE FIELD32(0x00010000)
/*
* HOST-MCU shared memory
*/
#define HOST_CMD_CSR 0x0404
#define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x000000ff)
/*
* PBF registers
* Most are for debug. Driver doesn't touch PBF register.
*/
#define PBF_CFG 0x0408
#define PBF_MAX_PCNT 0x040c
#define PBF_CTRL 0x0410
#define PBF_INT_STA 0x0414
#define PBF_INT_ENA 0x0418
/*
* BCN_OFFSET0:
*/
#define BCN_OFFSET0 0x042c
#define BCN_OFFSET0_BCN0 FIELD32(0x000000ff)
#define BCN_OFFSET0_BCN1 FIELD32(0x0000ff00)
#define BCN_OFFSET0_BCN2 FIELD32(0x00ff0000)
#define BCN_OFFSET0_BCN3 FIELD32(0xff000000)
/*
* BCN_OFFSET1:
*/
#define BCN_OFFSET1 0x0430
#define BCN_OFFSET1_BCN4 FIELD32(0x000000ff)
#define BCN_OFFSET1_BCN5 FIELD32(0x0000ff00)
#define BCN_OFFSET1_BCN6 FIELD32(0x00ff0000)
#define BCN_OFFSET1_BCN7 FIELD32(0xff000000)
/*
* TXRXQ_PCNT: PBF register
* PCNT_TX0Q: Page count for TX hardware queue 0
* PCNT_TX1Q: Page count for TX hardware queue 1
* PCNT_TX2Q: Page count for TX hardware queue 2
* PCNT_RX0Q: Page count for RX hardware queue
*/
#define TXRXQ_PCNT 0x0438
#define TXRXQ_PCNT_TX0Q FIELD32(0x000000ff)
#define TXRXQ_PCNT_TX1Q FIELD32(0x0000ff00)
#define TXRXQ_PCNT_TX2Q FIELD32(0x00ff0000)
#define TXRXQ_PCNT_RX0Q FIELD32(0xff000000)
/*
* PBF register
* Debug. Driver doesn't touch PBF register.
*/
#define PBF_DBG 0x043c
/*
* RF registers
*/
#define RF_CSR_CFG 0x0500
#define RF_CSR_CFG_DATA FIELD32(0x000000ff)
#define RF_CSR_CFG_REGNUM FIELD32(0x00003f00)
#define RF_CSR_CFG_WRITE FIELD32(0x00010000)
#define RF_CSR_CFG_BUSY FIELD32(0x00020000)
/*
* MT7620 RF registers (reversed order)
*/
#define RF_CSR_CFG_DATA_MT7620 FIELD32(0x0000ff00)
#define RF_CSR_CFG_REGNUM_MT7620 FIELD32(0x03ff0000)
#define RF_CSR_CFG_WRITE_MT7620 FIELD32(0x00000010)
#define RF_CSR_CFG_BUSY_MT7620 FIELD32(0x00000001)
/* undocumented registers for calibration of new MAC */
#define RF_CONTROL0 0x0518
#define RF_BYPASS0 0x051c
#define RF_CONTROL1 0x0520
#define RF_BYPASS1 0x0524
#define RF_CONTROL2 0x0528
#define RF_BYPASS2 0x052c
#define RF_CONTROL3 0x0530
#define RF_BYPASS3 0x0534
/*
* EFUSE_CSR: RT30x0 EEPROM
*/
#define EFUSE_CTRL 0x0580
#define EFUSE_CTRL_ADDRESS_IN FIELD32(0x03fe0000)
#define EFUSE_CTRL_MODE FIELD32(0x000000c0)
#define EFUSE_CTRL_KICK FIELD32(0x40000000)
#define EFUSE_CTRL_PRESENT FIELD32(0x80000000)
/*
* EFUSE_DATA0
*/
#define EFUSE_DATA0 0x0590
/*
* EFUSE_DATA1
*/
#define EFUSE_DATA1 0x0594
/*
* EFUSE_DATA2
*/
#define EFUSE_DATA2 0x0598
/*
* EFUSE_DATA3
*/
#define EFUSE_DATA3 0x059c
/*
* LDO_CFG0
*/
#define LDO_CFG0 0x05d4
#define LDO_CFG0_DELAY3 FIELD32(0x000000ff)
#define LDO_CFG0_DELAY2 FIELD32(0x0000ff00)
#define LDO_CFG0_DELAY1 FIELD32(0x00ff0000)
#define LDO_CFG0_BGSEL FIELD32(0x03000000)
#define LDO_CFG0_LDO_CORE_VLEVEL FIELD32(0x1c000000)
#define LD0_CFG0_LDO25_LEVEL FIELD32(0x60000000)
#define LDO_CFG0_LDO25_LARGEA FIELD32(0x80000000)
/*
* GPIO_SWITCH
*/
#define GPIO_SWITCH 0x05dc
#define GPIO_SWITCH_0 FIELD32(0x00000001)
#define GPIO_SWITCH_1 FIELD32(0x00000002)
#define GPIO_SWITCH_2 FIELD32(0x00000004)
#define GPIO_SWITCH_3 FIELD32(0x00000008)
#define GPIO_SWITCH_4 FIELD32(0x00000010)
#define GPIO_SWITCH_5 FIELD32(0x00000020)
#define GPIO_SWITCH_6 FIELD32(0x00000040)
#define GPIO_SWITCH_7 FIELD32(0x00000080)
/*
* FIXME: where the DEBUG_INDEX name come from?
*/
#define MAC_DEBUG_INDEX 0x05e8
#define MAC_DEBUG_INDEX_XTAL FIELD32(0x80000000)
/*
* MAC Control/Status Registers(CSR).
* Some values are set in TU, whereas 1 TU == 1024 us.
*/
/*
* MAC_CSR0: ASIC revision number.
* ASIC_REV: 0
* ASIC_VER: 2860 or 2870
*/
#define MAC_CSR0 0x1000
#define MAC_CSR0_REVISION FIELD32(0x0000ffff)
#define MAC_CSR0_CHIPSET FIELD32(0xffff0000)
/*
* MAC_SYS_CTRL:
*/
#define MAC_SYS_CTRL 0x1004
#define MAC_SYS_CTRL_RESET_CSR FIELD32(0x00000001)
#define MAC_SYS_CTRL_RESET_BBP FIELD32(0x00000002)
#define MAC_SYS_CTRL_ENABLE_TX FIELD32(0x00000004)
#define MAC_SYS_CTRL_ENABLE_RX FIELD32(0x00000008)
#define MAC_SYS_CTRL_CONTINUOUS_TX FIELD32(0x00000010)
#define MAC_SYS_CTRL_LOOPBACK FIELD32(0x00000020)
#define MAC_SYS_CTRL_WLAN_HALT FIELD32(0x00000040)
#define MAC_SYS_CTRL_RX_TIMESTAMP FIELD32(0x00000080)
/*
* MAC_ADDR_DW0: STA MAC register 0
*/
#define MAC_ADDR_DW0 0x1008
#define MAC_ADDR_DW0_BYTE0 FIELD32(0x000000ff)
#define MAC_ADDR_DW0_BYTE1 FIELD32(0x0000ff00)
#define MAC_ADDR_DW0_BYTE2 FIELD32(0x00ff0000)
#define MAC_ADDR_DW0_BYTE3 FIELD32(0xff000000)
/*
* MAC_ADDR_DW1: STA MAC register 1
* UNICAST_TO_ME_MASK:
* Used to mask off bits from byte 5 of the MAC address
* to determine the UNICAST_TO_ME bit for RX frames.
* The full mask is complemented by BSS_ID_MASK:
* MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK
*/
#define MAC_ADDR_DW1 0x100c
#define MAC_ADDR_DW1_BYTE4 FIELD32(0x000000ff)
#define MAC_ADDR_DW1_BYTE5 FIELD32(0x0000ff00)
#define MAC_ADDR_DW1_UNICAST_TO_ME_MASK FIELD32(0x00ff0000)
/*
* MAC_BSSID_DW0: BSSID register 0
*/
#define MAC_BSSID_DW0 0x1010
#define MAC_BSSID_DW0_BYTE0 FIELD32(0x000000ff)
#define MAC_BSSID_DW0_BYTE1 FIELD32(0x0000ff00)
#define MAC_BSSID_DW0_BYTE2 FIELD32(0x00ff0000)
#define MAC_BSSID_DW0_BYTE3 FIELD32(0xff000000)
/*
* MAC_BSSID_DW1: BSSID register 1
* BSS_ID_MASK:
* 0: 1-BSSID mode (BSS index = 0)
* 1: 2-BSSID mode (BSS index: Byte5, bit 0)
* 2: 4-BSSID mode (BSS index: byte5, bit 0 - 1)
* 3: 8-BSSID mode (BSS index: byte5, bit 0 - 2)
* This mask is used to mask off bits 0, 1 and 2 of byte 5 of the
* BSSID. This will make sure that those bits will be ignored
* when determining the MY_BSS of RX frames.
*/
#define MAC_BSSID_DW1 0x1014
#define MAC_BSSID_DW1_BYTE4 FIELD32(0x000000ff)
#define MAC_BSSID_DW1_BYTE5 FIELD32(0x0000ff00)
#define MAC_BSSID_DW1_BSS_ID_MASK FIELD32(0x00030000)
#define MAC_BSSID_DW1_BSS_BCN_NUM FIELD32(0x001c0000)
/*
* MAX_LEN_CFG: Maximum frame length register.
* MAX_MPDU: rt2860b max 16k bytes
* MAX_PSDU: Maximum PSDU length
* (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16
*/
#define MAX_LEN_CFG 0x1018
#define MAX_LEN_CFG_MAX_MPDU FIELD32(0x00000fff)
#define MAX_LEN_CFG_MAX_PSDU FIELD32(0x00003000)
#define MAX_LEN_CFG_MIN_PSDU FIELD32(0x0000c000)
#define MAX_LEN_CFG_MIN_MPDU FIELD32(0x000f0000)
/*
* BBP_CSR_CFG: BBP serial control register
* VALUE: Register value to program into BBP
* REG_NUM: Selected BBP register
* READ_CONTROL: 0 write BBP, 1 read BBP
* BUSY: ASIC is busy executing BBP commands
* BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks
* BBP_RW_MODE: 0 serial, 1 parallel
*/
#define BBP_CSR_CFG 0x101c
#define BBP_CSR_CFG_VALUE FIELD32(0x000000ff)
#define BBP_CSR_CFG_REGNUM FIELD32(0x0000ff00)
#define BBP_CSR_CFG_READ_CONTROL FIELD32(0x00010000)
#define BBP_CSR_CFG_BUSY FIELD32(0x00020000)
#define BBP_CSR_CFG_BBP_PAR_DUR FIELD32(0x00040000)
#define BBP_CSR_CFG_BBP_RW_MODE FIELD32(0x00080000)
/*
* RF_CSR_CFG0: RF control register
* REGID_AND_VALUE: Register value to program into RF
* BITWIDTH: Selected RF register
* STANDBYMODE: 0 high when standby, 1 low when standby
* SEL: 0 RF_LE0 activate, 1 RF_LE1 activate
* BUSY: ASIC is busy executing RF commands
*/
#define RF_CSR_CFG0 0x1020
#define RF_CSR_CFG0_REGID_AND_VALUE FIELD32(0x00ffffff)
#define RF_CSR_CFG0_BITWIDTH FIELD32(0x1f000000)
#define RF_CSR_CFG0_REG_VALUE_BW FIELD32(0x1fffffff)
#define RF_CSR_CFG0_STANDBYMODE FIELD32(0x20000000)
#define RF_CSR_CFG0_SEL FIELD32(0x40000000)
#define RF_CSR_CFG0_BUSY FIELD32(0x80000000)
/*
* RF_CSR_CFG1: RF control register
* REGID_AND_VALUE: Register value to program into RF
* RFGAP: Gap between BB_CONTROL_RF and RF_LE
* 0: 3 system clock cycle (37.5usec)
* 1: 5 system clock cycle (62.5usec)
*/
#define RF_CSR_CFG1 0x1024
#define RF_CSR_CFG1_REGID_AND_VALUE FIELD32(0x00ffffff)
#define RF_CSR_CFG1_RFGAP FIELD32(0x1f000000)
/*
* RF_CSR_CFG2: RF control register
* VALUE: Register value to program into RF
*/
#define RF_CSR_CFG2 0x1028
#define RF_CSR_CFG2_VALUE FIELD32(0x00ffffff)
/*
* LED_CFG: LED control
* ON_PERIOD: LED active time (ms) during TX (only used for LED mode 1)
* OFF_PERIOD: LED inactive time (ms) during TX (only used for LED mode 1)
* SLOW_BLINK_PERIOD: LED blink interval in seconds (only used for LED mode 2)
* color LED's:
* 0: off
* 1: blinking upon TX2
* 2: periodic slow blinking
* 3: always on
* LED polarity:
* 0: active low
* 1: active high
*/
#define LED_CFG 0x102c
#define LED_CFG_ON_PERIOD FIELD32(0x000000ff)
#define LED_CFG_OFF_PERIOD FIELD32(0x0000ff00)
#define LED_CFG_SLOW_BLINK_PERIOD FIELD32(0x003f0000)
#define LED_CFG_R_LED_MODE FIELD32(0x03000000)
#define LED_CFG_G_LED_MODE FIELD32(0x0c000000)
#define LED_CFG_Y_LED_MODE FIELD32(0x30000000)
#define LED_CFG_LED_POLAR FIELD32(0x40000000)
/*
* AMPDU_MAX_LEN_20M1S: Per MCS max A-MPDU length, 20 MHz, MCS 0-7
* AMPDU_MAX_LEN_20M2S: Per MCS max A-MPDU length, 20 MHz, MCS 8-15
* AMPDU_MAX_LEN_40M1S: Per MCS max A-MPDU length, 40 MHz, MCS 0-7
* AMPDU_MAX_LEN_40M2S: Per MCS max A-MPDU length, 40 MHz, MCS 8-15
* Maximum A-MPDU length = 2^(AMPDU_MAX - 5) kilobytes
*/
#define AMPDU_MAX_LEN_20M1S 0x1030
#define AMPDU_MAX_LEN_20M2S 0x1034
#define AMPDU_MAX_LEN_40M1S 0x1038
#define AMPDU_MAX_LEN_40M2S 0x103C
/*
* AMPDU_BA_WINSIZE: Force BlockAck window size
* FORCE_WINSIZE_ENABLE:
* 0: Disable forcing of BlockAck window size
* 1: Enable forcing of BlockAck window size, overwrites values BlockAck
* window size values in the TXWI
* FORCE_WINSIZE: BlockAck window size
*/
#define AMPDU_BA_WINSIZE 0x1040
#define AMPDU_BA_WINSIZE_FORCE_WINSIZE_ENABLE FIELD32(0x00000020)
#define AMPDU_BA_WINSIZE_FORCE_WINSIZE FIELD32(0x0000001f)
/*
* XIFS_TIME_CFG: MAC timing
* CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX
* OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX
* OFDM_XIFS_TIME: unit 1us. Applied after OFDM RX
* when MAC doesn't reference BBP signal BBRXEND
* EIFS: unit 1us
* BB_RXEND_ENABLE: reference RXEND signal to begin XIFS defer
*
*/
#define XIFS_TIME_CFG 0x1100
#define XIFS_TIME_CFG_CCKM_SIFS_TIME FIELD32(0x000000ff)
#define XIFS_TIME_CFG_OFDM_SIFS_TIME FIELD32(0x0000ff00)
#define XIFS_TIME_CFG_OFDM_XIFS_TIME FIELD32(0x000f0000)
#define XIFS_TIME_CFG_EIFS FIELD32(0x1ff00000)
#define XIFS_TIME_CFG_BB_RXEND_ENABLE FIELD32(0x20000000)
/*
* BKOFF_SLOT_CFG:
*/
#define BKOFF_SLOT_CFG 0x1104
#define BKOFF_SLOT_CFG_SLOT_TIME FIELD32(0x000000ff)
#define BKOFF_SLOT_CFG_CC_DELAY_TIME FIELD32(0x0000ff00)
/*
* NAV_TIME_CFG:
*/
#define NAV_TIME_CFG 0x1108
#define NAV_TIME_CFG_SIFS FIELD32(0x000000ff)
#define NAV_TIME_CFG_SLOT_TIME FIELD32(0x0000ff00)
#define NAV_TIME_CFG_EIFS FIELD32(0x01ff0000)
#define NAV_TIME_ZERO_SIFS FIELD32(0x02000000)
/*
* CH_TIME_CFG: count as channel busy
* EIFS_BUSY: Count EIFS as channel busy
* NAV_BUSY: Count NAS as channel busy
* RX_BUSY: Count RX as channel busy
* TX_BUSY: Count TX as channel busy
* TMR_EN: Enable channel statistics timer
*/
#define CH_TIME_CFG 0x110c
#define CH_TIME_CFG_EIFS_BUSY FIELD32(0x00000010)
#define CH_TIME_CFG_NAV_BUSY FIELD32(0x00000008)
#define CH_TIME_CFG_RX_BUSY FIELD32(0x00000004)
#define CH_TIME_CFG_TX_BUSY FIELD32(0x00000002)
#define CH_TIME_CFG_TMR_EN FIELD32(0x00000001)
/*
* PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us
*/
#define PBF_LIFE_TIMER 0x1110
/*
* BCN_TIME_CFG:
* BEACON_INTERVAL: in unit of 1/16 TU
* TSF_TICKING: Enable TSF auto counting
* TSF_SYNC: Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode
* BEACON_GEN: Enable beacon generator
*/
#define BCN_TIME_CFG 0x1114
#define BCN_TIME_CFG_BEACON_INTERVAL FIELD32(0x0000ffff)
#define BCN_TIME_CFG_TSF_TICKING FIELD32(0x00010000)
#define BCN_TIME_CFG_TSF_SYNC FIELD32(0x00060000)
#define BCN_TIME_CFG_TBTT_ENABLE FIELD32(0x00080000)
#define BCN_TIME_CFG_BEACON_GEN FIELD32(0x00100000)
#define BCN_TIME_CFG_TX_TIME_COMPENSATE FIELD32(0xf0000000)
/*
* TBTT_SYNC_CFG:
* BCN_AIFSN: Beacon AIFSN after TBTT interrupt in slots
* BCN_CWMIN: Beacon CWMin after TBTT interrupt in slots
*/
#define TBTT_SYNC_CFG 0x1118
#define TBTT_SYNC_CFG_TBTT_ADJUST FIELD32(0x000000ff)
#define TBTT_SYNC_CFG_BCN_EXP_WIN FIELD32(0x0000ff00)
#define TBTT_SYNC_CFG_BCN_AIFSN FIELD32(0x000f0000)
#define TBTT_SYNC_CFG_BCN_CWMIN FIELD32(0x00f00000)
/*
* TSF_TIMER_DW0: Local lsb TSF timer, read-only
*/
#define TSF_TIMER_DW0 0x111c
#define TSF_TIMER_DW0_LOW_WORD FIELD32(0xffffffff)
/*
* TSF_TIMER_DW1: Local msb TSF timer, read-only
*/
#define TSF_TIMER_DW1 0x1120
#define TSF_TIMER_DW1_HIGH_WORD FIELD32(0xffffffff)
/*
* TBTT_TIMER: TImer remains till next TBTT, read-only
*/
#define TBTT_TIMER 0x1124
/*
* INT_TIMER_CFG: timer configuration
* PRE_TBTT_TIMER: leadtime to tbtt for pretbtt interrupt in units of 1/16 TU
* GP_TIMER: period of general purpose timer in units of 1/16 TU
*/
#define INT_TIMER_CFG 0x1128
#define INT_TIMER_CFG_PRE_TBTT_TIMER FIELD32(0x0000ffff)
#define INT_TIMER_CFG_GP_TIMER FIELD32(0xffff0000)
/*
* INT_TIMER_EN: GP-timer and pre-tbtt Int enable
*/
#define INT_TIMER_EN 0x112c
#define INT_TIMER_EN_PRE_TBTT_TIMER FIELD32(0x00000001)
#define INT_TIMER_EN_GP_TIMER FIELD32(0x00000002)
/*
* CH_IDLE_STA: channel idle time (in us)
*/
#define CH_IDLE_STA 0x1130
/*
* CH_BUSY_STA: channel busy time on primary channel (in us)
*/
#define CH_BUSY_STA 0x1134
/*
* CH_BUSY_STA_SEC: channel busy time on secondary channel in HT40 mode (in us)
*/
#define CH_BUSY_STA_SEC 0x1138
/*
* MAC_STATUS_CFG:
* BBP_RF_BUSY: When set to 0, BBP and RF are stable.
* if 1 or higher one of the 2 registers is busy.
*/
#define MAC_STATUS_CFG 0x1200
#define MAC_STATUS_CFG_BBP_RF_BUSY FIELD32(0x00000003)
#define MAC_STATUS_CFG_BBP_RF_BUSY_TX FIELD32(0x00000001)
#define MAC_STATUS_CFG_BBP_RF_BUSY_RX FIELD32(0x00000002)
/*
* PWR_PIN_CFG:
*/
#define PWR_PIN_CFG 0x1204
/*
* AUTOWAKEUP_CFG: Manual power control / status register
* TBCN_BEFORE_WAKE: ForceWake has high privilege than PutToSleep when both set
* AUTOWAKE: 0:sleep, 1:awake
*/
#define AUTOWAKEUP_CFG 0x1208
#define AUTOWAKEUP_CFG_AUTO_LEAD_TIME FIELD32(0x000000ff)
#define AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE FIELD32(0x00007f00)
#define AUTOWAKEUP_CFG_AUTOWAKE FIELD32(0x00008000)
/*
* MIMO_PS_CFG: MIMO Power-save Configuration
*/
#define MIMO_PS_CFG 0x1210
#define MIMO_PS_CFG_MMPS_BB_EN FIELD32(0x00000001)
#define MIMO_PS_CFG_MMPS_RX_ANT_NUM FIELD32(0x00000006)
#define MIMO_PS_CFG_MMPS_RF_EN FIELD32(0x00000008)
#define MIMO_PS_CFG_RX_STBY_POL FIELD32(0x00000010)
#define MIMO_PS_CFG_RX_RX_STBY0 FIELD32(0x00000020)
/*
* EDCA_AC0_CFG:
*/
#define EDCA_AC0_CFG 0x1300
#define EDCA_AC0_CFG_TX_OP FIELD32(0x000000ff)
#define EDCA_AC0_CFG_AIFSN FIELD32(0x00000f00)
#define EDCA_AC0_CFG_CWMIN FIELD32(0x0000f000)
#define EDCA_AC0_CFG_CWMAX FIELD32(0x000f0000)
/*
* EDCA_AC1_CFG:
*/
#define EDCA_AC1_CFG 0x1304
#define EDCA_AC1_CFG_TX_OP FIELD32(0x000000ff)
#define EDCA_AC1_CFG_AIFSN FIELD32(0x00000f00)
#define EDCA_AC1_CFG_CWMIN FIELD32(0x0000f000)
#define EDCA_AC1_CFG_CWMAX FIELD32(0x000f0000)
/*
* EDCA_AC2_CFG:
*/
#define EDCA_AC2_CFG 0x1308
#define EDCA_AC2_CFG_TX_OP FIELD32(0x000000ff)
#define EDCA_AC2_CFG_AIFSN FIELD32(0x00000f00)
#define EDCA_AC2_CFG_CWMIN FIELD32(0x0000f000)
#define EDCA_AC2_CFG_CWMAX FIELD32(0x000f0000)
/*
* EDCA_AC3_CFG:
*/
#define EDCA_AC3_CFG 0x130c
#define EDCA_AC3_CFG_TX_OP FIELD32(0x000000ff)
#define EDCA_AC3_CFG_AIFSN FIELD32(0x00000f00)
#define EDCA_AC3_CFG_CWMIN FIELD32(0x0000f000)
#define EDCA_AC3_CFG_CWMAX FIELD32(0x000f0000)
/*
* EDCA_TID_AC_MAP:
*/
#define EDCA_TID_AC_MAP 0x1310
/*
* TX_PWR_CFG:
*/
#define TX_PWR_CFG_RATE0 FIELD32(0x0000000f)
#define TX_PWR_CFG_RATE1 FIELD32(0x000000f0)
#define TX_PWR_CFG_RATE2 FIELD32(0x00000f00)
#define TX_PWR_CFG_RATE3 FIELD32(0x0000f000)
#define TX_PWR_CFG_RATE4 FIELD32(0x000f0000)
#define TX_PWR_CFG_RATE5 FIELD32(0x00f00000)
#define TX_PWR_CFG_RATE6 FIELD32(0x0f000000)
#define TX_PWR_CFG_RATE7 FIELD32(0xf0000000)
/*
* TX_PWR_CFG_0:
*/
#define TX_PWR_CFG_0 0x1314
#define TX_PWR_CFG_0_1MBS FIELD32(0x0000000f)
#define TX_PWR_CFG_0_2MBS FIELD32(0x000000f0)
#define TX_PWR_CFG_0_55MBS FIELD32(0x00000f00)
#define TX_PWR_CFG_0_11MBS FIELD32(0x0000f000)
#define TX_PWR_CFG_0_6MBS FIELD32(0x000f0000)
#define TX_PWR_CFG_0_9MBS FIELD32(0x00f00000)
#define TX_PWR_CFG_0_12MBS FIELD32(0x0f000000)
#define TX_PWR_CFG_0_18MBS FIELD32(0xf0000000)
/* bits for 3T devices */
#define TX_PWR_CFG_0_CCK1_CH0 FIELD32(0x0000000f)
#define TX_PWR_CFG_0_CCK1_CH1 FIELD32(0x000000f0)
#define TX_PWR_CFG_0_CCK5_CH0 FIELD32(0x00000f00)
#define TX_PWR_CFG_0_CCK5_CH1 FIELD32(0x0000f000)
#define TX_PWR_CFG_0_OFDM6_CH0 FIELD32(0x000f0000)
#define TX_PWR_CFG_0_OFDM6_CH1 FIELD32(0x00f00000)
#define TX_PWR_CFG_0_OFDM12_CH0 FIELD32(0x0f000000)
#define TX_PWR_CFG_0_OFDM12_CH1 FIELD32(0xf0000000)
/* bits for new 2T devices */
#define TX_PWR_CFG_0B_1MBS_2MBS FIELD32(0x000000ff)
#define TX_PWR_CFG_0B_5MBS_11MBS FIELD32(0x0000ff00)
#define TX_PWR_CFG_0B_6MBS_9MBS FIELD32(0x00ff0000)
#define TX_PWR_CFG_0B_12MBS_18MBS FIELD32(0xff000000)
/*
* TX_PWR_CFG_1:
*/
#define TX_PWR_CFG_1 0x1318
#define TX_PWR_CFG_1_24MBS FIELD32(0x0000000f)
#define TX_PWR_CFG_1_36MBS FIELD32(0x000000f0)
#define TX_PWR_CFG_1_48MBS FIELD32(0x00000f00)
#define TX_PWR_CFG_1_54MBS FIELD32(0x0000f000)
#define TX_PWR_CFG_1_MCS0 FIELD32(0x000f0000)
#define TX_PWR_CFG_1_MCS1 FIELD32(0x00f00000)
#define TX_PWR_CFG_1_MCS2 FIELD32(0x0f000000)
#define TX_PWR_CFG_1_MCS3 FIELD32(0xf0000000)
/* bits for 3T devices */
#define TX_PWR_CFG_1_OFDM24_CH0 FIELD32(0x0000000f)
#define TX_PWR_CFG_1_OFDM24_CH1 FIELD32(0x000000f0)
#define TX_PWR_CFG_1_OFDM48_CH0 FIELD32(0x00000f00)
#define TX_PWR_CFG_1_OFDM48_CH1 FIELD32(0x0000f000)
#define TX_PWR_CFG_1_MCS0_CH0 FIELD32(0x000f0000)
#define TX_PWR_CFG_1_MCS0_CH1 FIELD32(0x00f00000)
#define TX_PWR_CFG_1_MCS2_CH0 FIELD32(0x0f000000)
#define TX_PWR_CFG_1_MCS2_CH1 FIELD32(0xf0000000)
/* bits for new 2T devices */
#define TX_PWR_CFG_1B_24MBS_36MBS FIELD32(0x000000ff)
#define TX_PWR_CFG_1B_48MBS FIELD32(0x0000ff00)
#define TX_PWR_CFG_1B_MCS0_MCS1 FIELD32(0x00ff0000)
#define TX_PWR_CFG_1B_MCS2_MCS3 FIELD32(0xff000000)
/*
* TX_PWR_CFG_2:
*/
#define TX_PWR_CFG_2 0x131c
#define TX_PWR_CFG_2_MCS4 FIELD32(0x0000000f)
#define TX_PWR_CFG_2_MCS5 FIELD32(0x000000f0)
#define TX_PWR_CFG_2_MCS6 FIELD32(0x00000f00)
#define TX_PWR_CFG_2_MCS7 FIELD32(0x0000f000)
#define TX_PWR_CFG_2_MCS8 FIELD32(0x000f0000)
#define TX_PWR_CFG_2_MCS9 FIELD32(0x00f00000)
#define TX_PWR_CFG_2_MCS10 FIELD32(0x0f000000)
#define TX_PWR_CFG_2_MCS11 FIELD32(0xf0000000)
/* bits for 3T devices */
#define TX_PWR_CFG_2_MCS4_CH0 FIELD32(0x0000000f)
#define TX_PWR_CFG_2_MCS4_CH1 FIELD32(0x000000f0)
#define TX_PWR_CFG_2_MCS6_CH0 FIELD32(0x00000f00)
#define TX_PWR_CFG_2_MCS6_CH1 FIELD32(0x0000f000)
#define TX_PWR_CFG_2_MCS8_CH0 FIELD32(0x000f0000)
#define TX_PWR_CFG_2_MCS8_CH1 FIELD32(0x00f00000)
#define TX_PWR_CFG_2_MCS10_CH0 FIELD32(0x0f000000)
#define TX_PWR_CFG_2_MCS10_CH1 FIELD32(0xf0000000)
/* bits for new 2T devices */
#define TX_PWR_CFG_2B_MCS4_MCS5 FIELD32(0x000000ff)
#define TX_PWR_CFG_2B_MCS6_MCS7 FIELD32(0x0000ff00)
#define TX_PWR_CFG_2B_MCS8_MCS9 FIELD32(0x00ff0000)
#define TX_PWR_CFG_2B_MCS10_MCS11 FIELD32(0xff000000)
/*
* TX_PWR_CFG_3:
*/
#define TX_PWR_CFG_3 0x1320
#define TX_PWR_CFG_3_MCS12 FIELD32(0x0000000f)
#define TX_PWR_CFG_3_MCS13 FIELD32(0x000000f0)
#define TX_PWR_CFG_3_MCS14 FIELD32(0x00000f00)
#define TX_PWR_CFG_3_MCS15 FIELD32(0x0000f000)
#define TX_PWR_CFG_3_UNKNOWN1 FIELD32(0x000f0000)
#define TX_PWR_CFG_3_UNKNOWN2 FIELD32(0x00f00000)
#define TX_PWR_CFG_3_UNKNOWN3 FIELD32(0x0f000000)
#define TX_PWR_CFG_3_UNKNOWN4 FIELD32(0xf0000000)
/* bits for 3T devices */
#define TX_PWR_CFG_3_MCS12_CH0 FIELD32(0x0000000f)
#define TX_PWR_CFG_3_MCS12_CH1 FIELD32(0x000000f0)
#define TX_PWR_CFG_3_MCS14_CH0 FIELD32(0x00000f00)
#define TX_PWR_CFG_3_MCS14_CH1 FIELD32(0x0000f000)
#define TX_PWR_CFG_3_STBC0_CH0 FIELD32(0x000f0000)
#define TX_PWR_CFG_3_STBC0_CH1 FIELD32(0x00f00000)
#define TX_PWR_CFG_3_STBC2_CH0 FIELD32(0x0f000000)
#define TX_PWR_CFG_3_STBC2_CH1 FIELD32(0xf0000000)
/* bits for new 2T devices */
#define TX_PWR_CFG_3B_MCS12_MCS13 FIELD32(0x000000ff)
#define TX_PWR_CFG_3B_MCS14 FIELD32(0x0000ff00)
#define TX_PWR_CFG_3B_STBC_MCS0_MCS1 FIELD32(0x00ff0000)
#define TX_PWR_CFG_3B_STBC_MCS2_MSC3 FIELD32(0xff000000)
/*
* TX_PWR_CFG_4:
*/
#define TX_PWR_CFG_4 0x1324
#define TX_PWR_CFG_4_UNKNOWN5 FIELD32(0x0000000f)
#define TX_PWR_CFG_4_UNKNOWN6 FIELD32(0x000000f0)
#define TX_PWR_CFG_4_UNKNOWN7 FIELD32(0x00000f00)
#define TX_PWR_CFG_4_UNKNOWN8 FIELD32(0x0000f000)
/* bits for 3T devices */
#define TX_PWR_CFG_4_STBC4_CH0 FIELD32(0x0000000f)
#define TX_PWR_CFG_4_STBC4_CH1 FIELD32(0x000000f0)
#define TX_PWR_CFG_4_STBC6_CH0 FIELD32(0x00000f00)
#define TX_PWR_CFG_4_STBC6_CH1 FIELD32(0x0000f000)
/* bits for new 2T devices */
#define TX_PWR_CFG_4B_STBC_MCS4_MCS5 FIELD32(0x000000ff)
#define TX_PWR_CFG_4B_STBC_MCS6 FIELD32(0x0000ff00)
/*
* TX_PIN_CFG:
*/
#define TX_PIN_CFG 0x1328
#define TX_PIN_CFG_PA_PE_DISABLE 0xfcfffff0
#define TX_PIN_CFG_PA_PE_A0_EN FIELD32(0x00000001)
#define TX_PIN_CFG_PA_PE_G0_EN FIELD32(0x00000002)
#define TX_PIN_CFG_PA_PE_A1_EN FIELD32(0x00000004)
#define TX_PIN_CFG_PA_PE_G1_EN FIELD32(0x00000008)
#define TX_PIN_CFG_PA_PE_A0_POL FIELD32(0x00000010)
#define TX_PIN_CFG_PA_PE_G0_POL FIELD32(0x00000020)
#define TX_PIN_CFG_PA_PE_A1_POL FIELD32(0x00000040)
#define TX_PIN_CFG_PA_PE_G1_POL FIELD32(0x00000080)
#define TX_PIN_CFG_LNA_PE_A0_EN FIELD32(0x00000100)
#define TX_PIN_CFG_LNA_PE_G0_EN FIELD32(0x00000200)
#define TX_PIN_CFG_LNA_PE_A1_EN FIELD32(0x00000400)
#define TX_PIN_CFG_LNA_PE_G1_EN FIELD32(0x00000800)
#define TX_PIN_CFG_LNA_PE_A0_POL FIELD32(0x00001000)
#define TX_PIN_CFG_LNA_PE_G0_POL FIELD32(0x00002000)
#define TX_PIN_CFG_LNA_PE_A1_POL FIELD32(0x00004000)
#define TX_PIN_CFG_LNA_PE_G1_POL FIELD32(0x00008000)
#define TX_PIN_CFG_RFTR_EN FIELD32(0x00010000)
#define TX_PIN_CFG_RFTR_POL FIELD32(0x00020000)
#define TX_PIN_CFG_TRSW_EN FIELD32(0x00040000)
#define TX_PIN_CFG_TRSW_POL FIELD32(0x00080000)
#define TX_PIN_CFG_RFRX_EN FIELD32(0x00100000)
#define TX_PIN_CFG_RFRX_POL FIELD32(0x00200000)
#define TX_PIN_CFG_PA_PE_A2_EN FIELD32(0x01000000)
#define TX_PIN_CFG_PA_PE_G2_EN FIELD32(0x02000000)
#define TX_PIN_CFG_PA_PE_A2_POL FIELD32(0x04000000)
#define TX_PIN_CFG_PA_PE_G2_POL FIELD32(0x08000000)
#define TX_PIN_CFG_LNA_PE_A2_EN FIELD32(0x10000000)
#define TX_PIN_CFG_LNA_PE_G2_EN FIELD32(0x20000000)
#define TX_PIN_CFG_LNA_PE_A2_POL FIELD32(0x40000000)
#define TX_PIN_CFG_LNA_PE_G2_POL FIELD32(0x80000000)
/*
* TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz
*/
#define TX_BAND_CFG 0x132c
#define TX_BAND_CFG_HT40_MINUS FIELD32(0x00000001)
#define TX_BAND_CFG_A FIELD32(0x00000002)
#define TX_BAND_CFG_BG FIELD32(0x00000004)
/*
* TX_SW_CFG0:
*/
#define TX_SW_CFG0 0x1330
/*
* TX_SW_CFG1:
*/
#define TX_SW_CFG1 0x1334
/*
* TX_SW_CFG2:
*/
#define TX_SW_CFG2 0x1338
/*
* TXOP_THRES_CFG:
*/
#define TXOP_THRES_CFG 0x133c
/*
* TXOP_CTRL_CFG:
* TIMEOUT_TRUN_EN: Enable/Disable TXOP timeout truncation
* AC_TRUN_EN: Enable/Disable truncation for AC change
* TXRATEGRP_TRUN_EN: Enable/Disable truncation for TX rate group change
* USER_MODE_TRUN_EN: Enable/Disable truncation for user TXOP mode
* MIMO_PS_TRUN_EN: Enable/Disable truncation for MIMO PS RTS/CTS
* RESERVED_TRUN_EN: Reserved
* LSIG_TXOP_EN: Enable/Disable L-SIG TXOP protection
* EXT_CCA_EN: Enable/Disable extension channel CCA reference (Defer 40Mhz
* transmissions if extension CCA is clear).
* EXT_CCA_DLY: Extension CCA signal delay time (unit: us)
* EXT_CWMIN: CwMin for extension channel backoff
* 0: Disabled
*
*/
#define TXOP_CTRL_CFG 0x1340
#define TXOP_CTRL_CFG_TIMEOUT_TRUN_EN FIELD32(0x00000001)
#define TXOP_CTRL_CFG_AC_TRUN_EN FIELD32(0x00000002)
#define TXOP_CTRL_CFG_TXRATEGRP_TRUN_EN FIELD32(0x00000004)
#define TXOP_CTRL_CFG_USER_MODE_TRUN_EN FIELD32(0x00000008)
#define TXOP_CTRL_CFG_MIMO_PS_TRUN_EN FIELD32(0x00000010)
#define TXOP_CTRL_CFG_RESERVED_TRUN_EN FIELD32(0x00000020)
#define TXOP_CTRL_CFG_LSIG_TXOP_EN FIELD32(0x00000040)
#define TXOP_CTRL_CFG_EXT_CCA_EN FIELD32(0x00000080)
#define TXOP_CTRL_CFG_EXT_CCA_DLY FIELD32(0x0000ff00)
#define TXOP_CTRL_CFG_EXT_CWMIN FIELD32(0x000f0000)
/*
* TX_RTS_CFG:
* RTS_THRES: unit:byte
* RTS_FBK_EN: enable rts rate fallback
*/
#define TX_RTS_CFG 0x1344
#define TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT FIELD32(0x000000ff)
#define TX_RTS_CFG_RTS_THRES FIELD32(0x00ffff00)
#define TX_RTS_CFG_RTS_FBK_EN FIELD32(0x01000000)
/*
* TX_TIMEOUT_CFG:
* MPDU_LIFETIME: expiration time = 2^(9+MPDU LIFE TIME) us
* RX_ACK_TIMEOUT: unit:slot. Used for TX procedure
* TX_OP_TIMEOUT: TXOP timeout value for TXOP truncation.
* it is recommended that:
* (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT)
*/
#define TX_TIMEOUT_CFG 0x1348
#define TX_TIMEOUT_CFG_MPDU_LIFETIME FIELD32(0x000000f0)
#define TX_TIMEOUT_CFG_RX_ACK_TIMEOUT FIELD32(0x0000ff00)
#define TX_TIMEOUT_CFG_TX_OP_TIMEOUT FIELD32(0x00ff0000)
/*
* TX_RTY_CFG:
* SHORT_RTY_LIMIT: short retry limit
* LONG_RTY_LIMIT: long retry limit
* LONG_RTY_THRE: Long retry threshoold
* NON_AGG_RTY_MODE: Non-Aggregate MPDU retry mode
* 0:expired by retry limit, 1: expired by mpdu life timer
* AGG_RTY_MODE: Aggregate MPDU retry mode
* 0:expired by retry limit, 1: expired by mpdu life timer
* TX_AUTO_FB_ENABLE: Tx retry PHY rate auto fallback enable
*/
#define TX_RTY_CFG 0x134c
#define TX_RTY_CFG_SHORT_RTY_LIMIT FIELD32(0x000000ff)
#define TX_RTY_CFG_LONG_RTY_LIMIT FIELD32(0x0000ff00)
#define TX_RTY_CFG_LONG_RTY_THRE FIELD32(0x0fff0000)
#define TX_RTY_CFG_NON_AGG_RTY_MODE FIELD32(0x10000000)
#define TX_RTY_CFG_AGG_RTY_MODE FIELD32(0x20000000)
#define TX_RTY_CFG_TX_AUTO_FB_ENABLE FIELD32(0x40000000)
/*
* TX_LINK_CFG:
* REMOTE_MFB_LIFETIME: remote MFB life time. unit: 32us
* MFB_ENABLE: TX apply remote MFB 1:enable
* REMOTE_UMFS_ENABLE: remote unsolicit MFB enable
* 0: not apply remote remote unsolicit (MFS=7)
* TX_MRQ_EN: MCS request TX enable
* TX_RDG_EN: RDG TX enable
* TX_CF_ACK_EN: Piggyback CF-ACK enable
* REMOTE_MFB: remote MCS feedback
* REMOTE_MFS: remote MCS feedback sequence number
*/
#define TX_LINK_CFG 0x1350
#define TX_LINK_CFG_REMOTE_MFB_LIFETIME FIELD32(0x000000ff)
#define TX_LINK_CFG_MFB_ENABLE FIELD32(0x00000100)
#define TX_LINK_CFG_REMOTE_UMFS_ENABLE FIELD32(0x00000200)
#define TX_LINK_CFG_TX_MRQ_EN FIELD32(0x00000400)
#define TX_LINK_CFG_TX_RDG_EN FIELD32(0x00000800)
#define TX_LINK_CFG_TX_CF_ACK_EN FIELD32(0x00001000)
#define TX_LINK_CFG_REMOTE_MFB FIELD32(0x00ff0000)
#define TX_LINK_CFG_REMOTE_MFS FIELD32(0xff000000)
/*
* HT_FBK_CFG0:
*/
#define HT_FBK_CFG0 0x1354
#define HT_FBK_CFG0_HTMCS0FBK FIELD32(0x0000000f)
#define HT_FBK_CFG0_HTMCS1FBK FIELD32(0x000000f0)
#define HT_FBK_CFG0_HTMCS2FBK FIELD32(0x00000f00)
#define HT_FBK_CFG0_HTMCS3FBK FIELD32(0x0000f000)
#define HT_FBK_CFG0_HTMCS4FBK FIELD32(0x000f0000)
#define HT_FBK_CFG0_HTMCS5FBK FIELD32(0x00f00000)
#define HT_FBK_CFG0_HTMCS6FBK FIELD32(0x0f000000)
#define HT_FBK_CFG0_HTMCS7FBK FIELD32(0xf0000000)
/*
* HT_FBK_CFG1:
*/
#define HT_FBK_CFG1 0x1358
#define HT_FBK_CFG1_HTMCS8FBK FIELD32(0x0000000f)
#define HT_FBK_CFG1_HTMCS9FBK FIELD32(0x000000f0)
#define HT_FBK_CFG1_HTMCS10FBK FIELD32(0x00000f00)
#define HT_FBK_CFG1_HTMCS11FBK FIELD32(0x0000f000)
#define HT_FBK_CFG1_HTMCS12FBK FIELD32(0x000f0000)
#define HT_FBK_CFG1_HTMCS13FBK FIELD32(0x00f00000)
#define HT_FBK_CFG1_HTMCS14FBK FIELD32(0x0f000000)
#define HT_FBK_CFG1_HTMCS15FBK FIELD32(0xf0000000)
/*
* LG_FBK_CFG0:
*/
#define LG_FBK_CFG0 0x135c
#define LG_FBK_CFG0_OFDMMCS0FBK FIELD32(0x0000000f)
#define LG_FBK_CFG0_OFDMMCS1FBK FIELD32(0x000000f0)
#define LG_FBK_CFG0_OFDMMCS2FBK FIELD32(0x00000f00)
#define LG_FBK_CFG0_OFDMMCS3FBK FIELD32(0x0000f000)
#define LG_FBK_CFG0_OFDMMCS4FBK FIELD32(0x000f0000)
#define LG_FBK_CFG0_OFDMMCS5FBK FIELD32(0x00f00000)
#define LG_FBK_CFG0_OFDMMCS6FBK FIELD32(0x0f000000)
#define LG_FBK_CFG0_OFDMMCS7FBK FIELD32(0xf0000000)
/*
* LG_FBK_CFG1:
*/
#define LG_FBK_CFG1 0x1360
#define LG_FBK_CFG0_CCKMCS0FBK FIELD32(0x0000000f)
#define LG_FBK_CFG0_CCKMCS1FBK FIELD32(0x000000f0)
#define LG_FBK_CFG0_CCKMCS2FBK FIELD32(0x00000f00)
#define LG_FBK_CFG0_CCKMCS3FBK FIELD32(0x0000f000)
/*
* CCK_PROT_CFG: CCK Protection
* PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd)
* PROTECT_CTRL: Protection control frame type for CCK TX
* 0:none, 1:RTS/CTS, 2:CTS-to-self
* PROTECT_NAV_SHORT: TXOP protection type for CCK TX with short NAV
* PROTECT_NAV_LONG: TXOP protection type for CCK TX with long NAV
* TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow
* TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow
* TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow
* TX_OP_ALLOW_MM40: CCK TXOP allowance, 0:disallow
* TX_OP_ALLOW_GF20: CCK TXOP allowance, 0:disallow
* TX_OP_ALLOW_GF40: CCK TXOP allowance, 0:disallow
* RTS_TH_EN: RTS threshold enable on CCK TX
*/
#define CCK_PROT_CFG 0x1364
#define CCK_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
#define CCK_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
#define CCK_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000)
#define CCK_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000)
#define CCK_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
#define CCK_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
#define CCK_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
#define CCK_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
#define CCK_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
#define CCK_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
#define CCK_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
/*
* OFDM_PROT_CFG: OFDM Protection
*/
#define OFDM_PROT_CFG 0x1368
#define OFDM_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
#define OFDM_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
#define OFDM_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000)
#define OFDM_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000)
#define OFDM_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
#define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
#define OFDM_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
#define OFDM_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
#define OFDM_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
#define OFDM_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
#define OFDM_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
/*
* MM20_PROT_CFG: MM20 Protection
*/
#define MM20_PROT_CFG 0x136c
#define MM20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
#define MM20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
#define MM20_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000)
#define MM20_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000)
#define MM20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
#define MM20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
#define MM20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
#define MM20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
#define MM20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
#define MM20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
#define MM20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
/*
* MM40_PROT_CFG: MM40 Protection
*/
#define MM40_PROT_CFG 0x1370
#define MM40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
#define MM40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
#define MM40_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000)
#define MM40_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000)
#define MM40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
#define MM40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
#define MM40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
#define MM40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
#define MM40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
#define MM40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
#define MM40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
/*
* GF20_PROT_CFG: GF20 Protection
*/
#define GF20_PROT_CFG 0x1374
#define GF20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
#define GF20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
#define GF20_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000)
#define GF20_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000)
#define GF20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
#define GF20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
#define GF20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
#define GF20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
#define GF20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
#define GF20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
#define GF20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
/*
* GF40_PROT_CFG: GF40 Protection
*/
#define GF40_PROT_CFG 0x1378
#define GF40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
#define GF40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
#define GF40_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000)
#define GF40_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000)
#define GF40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
#define GF40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
#define GF40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
#define GF40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
#define GF40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
#define GF40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
#define GF40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
/*
* EXP_CTS_TIME:
*/
#define EXP_CTS_TIME 0x137c
/*
* EXP_ACK_TIME:
*/
#define EXP_ACK_TIME 0x1380
/*
* HT_FBK_TO_LEGACY: Enable/Disable HT/RTS fallback to OFDM/CCK rate
* Not available for legacy SoCs
*/
#define HT_FBK_TO_LEGACY 0x1384
/* TX_PWR_CFG_5 */
#define TX_PWR_CFG_5 0x1384
#define TX_PWR_CFG_5_MCS16_CH0 FIELD32(0x0000000f)
#define TX_PWR_CFG_5_MCS16_CH1 FIELD32(0x000000f0)
#define TX_PWR_CFG_5_MCS16_CH2 FIELD32(0x00000f00)
#define TX_PWR_CFG_5_MCS18_CH0 FIELD32(0x000f0000)
#define TX_PWR_CFG_5_MCS18_CH1 FIELD32(0x00f00000)
#define TX_PWR_CFG_5_MCS18_CH2 FIELD32(0x0f000000)
/* TX_PWR_CFG_6 */
#define TX_PWR_CFG_6 0x1388
#define TX_PWR_CFG_6_MCS20_CH0 FIELD32(0x0000000f)
#define TX_PWR_CFG_6_MCS20_CH1 FIELD32(0x000000f0)
#define TX_PWR_CFG_6_MCS20_CH2 FIELD32(0x00000f00)
#define TX_PWR_CFG_6_MCS22_CH0 FIELD32(0x000f0000)
#define TX_PWR_CFG_6_MCS22_CH1 FIELD32(0x00f00000)
#define TX_PWR_CFG_6_MCS22_CH2 FIELD32(0x0f000000)
/* TX_PWR_CFG_0_EXT */
#define TX_PWR_CFG_0_EXT 0x1390
#define TX_PWR_CFG_0_EXT_CCK1_CH2 FIELD32(0x0000000f)
#define TX_PWR_CFG_0_EXT_CCK5_CH2 FIELD32(0x00000f00)
#define TX_PWR_CFG_0_EXT_OFDM6_CH2 FIELD32(0x000f0000)
#define TX_PWR_CFG_0_EXT_OFDM12_CH2 FIELD32(0x0f000000)
/* TX_PWR_CFG_1_EXT */
#define TX_PWR_CFG_1_EXT 0x1394
#define TX_PWR_CFG_1_EXT_OFDM24_CH2 FIELD32(0x0000000f)
#define TX_PWR_CFG_1_EXT_OFDM48_CH2 FIELD32(0x00000f00)
#define TX_PWR_CFG_1_EXT_MCS0_CH2 FIELD32(0x000f0000)
#define TX_PWR_CFG_1_EXT_MCS2_CH2 FIELD32(0x0f000000)
/* TX_PWR_CFG_2_EXT */
#define TX_PWR_CFG_2_EXT 0x1398
#define TX_PWR_CFG_2_EXT_MCS4_CH2 FIELD32(0x0000000f)
#define TX_PWR_CFG_2_EXT_MCS6_CH2 FIELD32(0x00000f00)
#define TX_PWR_CFG_2_EXT_MCS8_CH2 FIELD32(0x000f0000)
#define TX_PWR_CFG_2_EXT_MCS10_CH2 FIELD32(0x0f000000)
/* TX_PWR_CFG_3_EXT */
#define TX_PWR_CFG_3_EXT 0x139c
#define TX_PWR_CFG_3_EXT_MCS12_CH2 FIELD32(0x0000000f)
#define TX_PWR_CFG_3_EXT_MCS14_CH2 FIELD32(0x00000f00)
#define TX_PWR_CFG_3_EXT_STBC0_CH2 FIELD32(0x000f0000)
#define TX_PWR_CFG_3_EXT_STBC2_CH2 FIELD32(0x0f000000)
/* TX_PWR_CFG_4_EXT */
#define TX_PWR_CFG_4_EXT 0x13a0
#define TX_PWR_CFG_4_EXT_STBC4_CH2 FIELD32(0x0000000f)
#define TX_PWR_CFG_4_EXT_STBC6_CH2 FIELD32(0x00000f00)
/* TXn_RF_GAIN_CORRECT: RF Gain Correction for each RF_ALC[3:2]
* Unit: 0.1 dB, Range: -3.2 dB to 3.1 dB
*/
#define TX0_RF_GAIN_CORRECT 0x13a0
#define TX0_RF_GAIN_CORRECT_GAIN_CORR_0 FIELD32(0x0000003f)
#define TX0_RF_GAIN_CORRECT_GAIN_CORR_1 FIELD32(0x00003f00)
#define TX0_RF_GAIN_CORRECT_GAIN_CORR_2 FIELD32(0x003f0000)
#define TX0_RF_GAIN_CORRECT_GAIN_CORR_3 FIELD32(0x3f000000)
#define TX1_RF_GAIN_CORRECT 0x13a4
#define TX1_RF_GAIN_CORRECT_GAIN_CORR_0 FIELD32(0x0000003f)
#define TX1_RF_GAIN_CORRECT_GAIN_CORR_1 FIELD32(0x00003f00)
#define TX1_RF_GAIN_CORRECT_GAIN_CORR_2 FIELD32(0x003f0000)
#define TX1_RF_GAIN_CORRECT_GAIN_CORR_3 FIELD32(0x3f000000)
/* TXn_RF_GAIN_ATTEN: TXn RF Gain Attenuation Level
* Format: 7-bit, signed value
* Unit: 0.5 dB, Range: -20 dB to -5 dB
*/
#define TX0_RF_GAIN_ATTEN 0x13a8
#define TX0_RF_GAIN_ATTEN_LEVEL_0 FIELD32(0x0000007f)
#define TX0_RF_GAIN_ATTEN_LEVEL_1 FIELD32(0x00007f00)
#define TX0_RF_GAIN_ATTEN_LEVEL_2 FIELD32(0x007f0000)
#define TX0_RF_GAIN_ATTEN_LEVEL_3 FIELD32(0x7f000000)
#define TX1_RF_GAIN_ATTEN 0x13ac
#define TX1_RF_GAIN_ATTEN_LEVEL_0 FIELD32(0x0000007f)
#define TX1_RF_GAIN_ATTEN_LEVEL_1 FIELD32(0x00007f00)
#define TX1_RF_GAIN_ATTEN_LEVEL_2 FIELD32(0x007f0000)
#define TX1_RF_GAIN_ATTEN_LEVEL_3 FIELD32(0x7f000000)
/* TX_ALC_CFG_0: TX Automatic Level Control Configuration 0
* TX_ALC_LIMIT_n: TXn upper limit
* TX_ALC_CH_INIT_n: TXn channel initial transmission gain
* Unit: 0.5 dB, Range: 0 to 23.5 dB
*/
#define TX_ALC_CFG_0 0x13b0
#define TX_ALC_CFG_0_CH_INIT_0 FIELD32(0x0000003f)
#define TX_ALC_CFG_0_CH_INIT_1 FIELD32(0x00003f00)
#define TX_ALC_CFG_0_LIMIT_0 FIELD32(0x003f0000)
#define TX_ALC_CFG_0_LIMIT_1 FIELD32(0x3f000000)
/* TX_ALC_CFG_1: TX Automatic Level Control Configuration 1
* TX_TEMP_COMP: TX Power Temperature Compensation
* Unit: 0.5 dB, Range: -10 dB to 10 dB
* TXn_GAIN_FINE: TXn Gain Fine Adjustment
* Unit: 0.1 dB, Range: -0.8 dB to 0.7 dB
* RF_TOS_DLY: Sets the RF_TOS_EN assertion delay after
* deassertion of PA_PE.
* Unit: 0.25 usec
* TXn_RF_GAIN_ATTEN: TXn RF gain attentuation selector
* RF_TOS_TIMEOUT: time-out value for RF_TOS_ENABLE
* deassertion if RF_TOS_DONE is missing.
* Unit: 0.25 usec
* RF_TOS_ENABLE: TX offset calibration enable
* ROS_BUSY_EN: RX offset calibration busy enable
*/
#define TX_ALC_CFG_1 0x13b4
#define TX_ALC_CFG_1_TX_TEMP_COMP FIELD32(0x0000003f)
#define TX_ALC_CFG_1_TX0_GAIN_FINE FIELD32(0x00000f00)
#define TX_ALC_CFG_1_TX1_GAIN_FINE FIELD32(0x0000f000)
#define TX_ALC_CFG_1_RF_TOS_DLY FIELD32(0x00070000)
#define TX_ALC_CFG_1_TX0_RF_GAIN_ATTEN FIELD32(0x00300000)
#define TX_ALC_CFG_1_TX1_RF_GAIN_ATTEN FIELD32(0x00c00000)
#define TX_ALC_CFG_1_RF_TOS_TIMEOUT FIELD32(0x3f000000)
#define TX_ALC_CFG_1_RF_TOS_ENABLE FIELD32(0x40000000)
#define TX_ALC_CFG_1_ROS_BUSY_EN FIELD32(0x80000000)
/* TXn_BB_GAIN_ATTEN: TXn RF Gain Attenuation Level
* Format: 5-bit signed values
* Unit: 0.5 dB, Range: -8 dB to 7 dB
*/
#define TX0_BB_GAIN_ATTEN 0x13c0
#define TX0_BB_GAIN_ATTEN_LEVEL_0 FIELD32(0x0000001f)
#define TX0_BB_GAIN_ATTEN_LEVEL_1 FIELD32(0x00001f00)
#define TX0_BB_GAIN_ATTEN_LEVEL_2 FIELD32(0x001f0000)
#define TX0_BB_GAIN_ATTEN_LEVEL_3 FIELD32(0x1f000000)
#define TX1_BB_GAIN_ATTEN 0x13c4
#define TX1_BB_GAIN_ATTEN_LEVEL_0 FIELD32(0x0000001f)
#define TX1_BB_GAIN_ATTEN_LEVEL_1 FIELD32(0x00001f00)
#define TX1_BB_GAIN_ATTEN_LEVEL_2 FIELD32(0x001f0000)
#define TX1_BB_GAIN_ATTEN_LEVEL_3 FIELD32(0x1f000000)
/* TX_ALC_VGA3: TX Automatic Level Correction Variable Gain Amplifier 3 */
#define TX_ALC_VGA3 0x13c8
#define TX_ALC_VGA3_TX0_ALC_VGA3 FIELD32(0x0000001f)
#define TX_ALC_VGA3_TX1_ALC_VGA3 FIELD32(0x00001f00)
#define TX_ALC_VGA3_TX0_ALC_VGA2 FIELD32(0x001f0000)
#define TX_ALC_VGA3_TX1_ALC_VGA2 FIELD32(0x1f000000)
/* TX_PWR_CFG_7 */
#define TX_PWR_CFG_7 0x13d4
#define TX_PWR_CFG_7_OFDM54_CH0 FIELD32(0x0000000f)
#define TX_PWR_CFG_7_OFDM54_CH1 FIELD32(0x000000f0)
#define TX_PWR_CFG_7_OFDM54_CH2 FIELD32(0x00000f00)
#define TX_PWR_CFG_7_MCS7_CH0 FIELD32(0x000f0000)
#define TX_PWR_CFG_7_MCS7_CH1 FIELD32(0x00f00000)
#define TX_PWR_CFG_7_MCS7_CH2 FIELD32(0x0f000000)
/* bits for new 2T devices */
#define TX_PWR_CFG_7B_54MBS FIELD32(0x000000ff)
#define TX_PWR_CFG_7B_MCS7 FIELD32(0x00ff0000)
/* TX_PWR_CFG_8 */
#define TX_PWR_CFG_8 0x13d8
#define TX_PWR_CFG_8_MCS15_CH0 FIELD32(0x0000000f)
#define TX_PWR_CFG_8_MCS15_CH1 FIELD32(0x000000f0)
#define TX_PWR_CFG_8_MCS15_CH2 FIELD32(0x00000f00)
#define TX_PWR_CFG_8_MCS23_CH0 FIELD32(0x000f0000)
#define TX_PWR_CFG_8_MCS23_CH1 FIELD32(0x00f00000)
#define TX_PWR_CFG_8_MCS23_CH2 FIELD32(0x0f000000)
/* bits for new 2T devices */
#define TX_PWR_CFG_8B_MCS15 FIELD32(0x000000ff)
/* TX_PWR_CFG_9 */
#define TX_PWR_CFG_9 0x13dc
#define TX_PWR_CFG_9_STBC7_CH0 FIELD32(0x0000000f)
#define TX_PWR_CFG_9_STBC7_CH1 FIELD32(0x000000f0)
#define TX_PWR_CFG_9_STBC7_CH2 FIELD32(0x00000f00)
/* bits for new 2T devices */
#define TX_PWR_CFG_9B_STBC_MCS7 FIELD32(0x000000ff)
/*
* TX_TXBF_CFG:
*/
#define TX_TXBF_CFG_0 0x138c
#define TX_TXBF_CFG_1 0x13a4
#define TX_TXBF_CFG_2 0x13a8
#define TX_TXBF_CFG_3 0x13ac
/*
* TX_FBK_CFG_3S:
*/
#define TX_FBK_CFG_3S_0 0x13c4
#define TX_FBK_CFG_3S_1 0x13c8
/*
* RX_FILTER_CFG: RX configuration register.
*/
#define RX_FILTER_CFG 0x1400
#define RX_FILTER_CFG_DROP_CRC_ERROR FIELD32(0x00000001)
#define RX_FILTER_CFG_DROP_PHY_ERROR FIELD32(0x00000002)
#define RX_FILTER_CFG_DROP_NOT_TO_ME FIELD32(0x00000004)
#define RX_FILTER_CFG_DROP_NOT_MY_BSSD FIELD32(0x00000008)
#define RX_FILTER_CFG_DROP_VER_ERROR FIELD32(0x00000010)
#define RX_FILTER_CFG_DROP_MULTICAST FIELD32(0x00000020)
#define RX_FILTER_CFG_DROP_BROADCAST FIELD32(0x00000040)
#define RX_FILTER_CFG_DROP_DUPLICATE FIELD32(0x00000080)
#define RX_FILTER_CFG_DROP_CF_END_ACK FIELD32(0x00000100)
#define RX_FILTER_CFG_DROP_CF_END FIELD32(0x00000200)
#define RX_FILTER_CFG_DROP_ACK FIELD32(0x00000400)
#define RX_FILTER_CFG_DROP_CTS FIELD32(0x00000800)
#define RX_FILTER_CFG_DROP_RTS FIELD32(0x00001000)
#define RX_FILTER_CFG_DROP_PSPOLL FIELD32(0x00002000)
#define RX_FILTER_CFG_DROP_BA FIELD32(0x00004000)
#define RX_FILTER_CFG_DROP_BAR FIELD32(0x00008000)
#define RX_FILTER_CFG_DROP_CNTL FIELD32(0x00010000)
/*
* AUTO_RSP_CFG:
* AUTORESPONDER: 0: disable, 1: enable
* BAC_ACK_POLICY: 0:long, 1:short preamble
* CTS_40_MMODE: Response CTS 40MHz duplicate mode
* CTS_40_MREF: Response CTS 40MHz duplicate mode
* AR_PREAMBLE: Auto responder preamble 0:long, 1:short preamble
* DUAL_CTS_EN: Power bit value in control frame
* ACK_CTS_PSM_BIT:Power bit value in control frame
*/
#define AUTO_RSP_CFG 0x1404
#define AUTO_RSP_CFG_AUTORESPONDER FIELD32(0x00000001)
#define AUTO_RSP_CFG_BAC_ACK_POLICY FIELD32(0x00000002)
#define AUTO_RSP_CFG_CTS_40_MMODE FIELD32(0x00000004)
#define AUTO_RSP_CFG_CTS_40_MREF FIELD32(0x00000008)
#define AUTO_RSP_CFG_AR_PREAMBLE FIELD32(0x00000010)
#define AUTO_RSP_CFG_DUAL_CTS_EN FIELD32(0x00000040)
#define AUTO_RSP_CFG_ACK_CTS_PSM_BIT FIELD32(0x00000080)
/*
* LEGACY_BASIC_RATE:
*/
#define LEGACY_BASIC_RATE 0x1408
/*
* HT_BASIC_RATE:
*/
#define HT_BASIC_RATE 0x140c
/*
* HT_CTRL_CFG:
*/
#define HT_CTRL_CFG 0x1410
/*
* SIFS_COST_CFG:
*/
#define SIFS_COST_CFG 0x1414
/*
* RX_PARSER_CFG:
* Set NAV for all received frames
*/
#define RX_PARSER_CFG 0x1418
/*
* TX_SEC_CNT0:
*/
#define TX_SEC_CNT0 0x1500
/*
* RX_SEC_CNT0:
*/
#define RX_SEC_CNT0 0x1504
/*
* CCMP_FC_MUTE:
*/
#define CCMP_FC_MUTE 0x1508
/*
* TXOP_HLDR_ADDR0:
*/
#define TXOP_HLDR_ADDR0 0x1600
/*
* TXOP_HLDR_ADDR1:
*/
#define TXOP_HLDR_ADDR1 0x1604
/*
* TXOP_HLDR_ET:
*/
#define TXOP_HLDR_ET 0x1608
/*
* QOS_CFPOLL_RA_DW0:
*/
#define QOS_CFPOLL_RA_DW0 0x160c
/*
* QOS_CFPOLL_RA_DW1:
*/
#define QOS_CFPOLL_RA_DW1 0x1610
/*
* QOS_CFPOLL_QC:
*/
#define QOS_CFPOLL_QC 0x1614
/*
* RX_STA_CNT0: RX PLCP error count & RX CRC error count
*/
#define RX_STA_CNT0 0x1700
#define RX_STA_CNT0_CRC_ERR FIELD32(0x0000ffff)
#define RX_STA_CNT0_PHY_ERR FIELD32(0xffff0000)
/*
* RX_STA_CNT1: RX False CCA count & RX LONG frame count
*/
#define RX_STA_CNT1 0x1704
#define RX_STA_CNT1_FALSE_CCA FIELD32(0x0000ffff)
#define RX_STA_CNT1_PLCP_ERR FIELD32(0xffff0000)
/*
* RX_STA_CNT2:
*/
#define RX_STA_CNT2 0x1708
#define RX_STA_CNT2_RX_DUPLI_COUNT FIELD32(0x0000ffff)
#define RX_STA_CNT2_RX_FIFO_OVERFLOW FIELD32(0xffff0000)
/*
* TX_STA_CNT0: TX Beacon count
*/
#define TX_STA_CNT0 0x170c
#define TX_STA_CNT0_TX_FAIL_COUNT FIELD32(0x0000ffff)
#define TX_STA_CNT0_TX_BEACON_COUNT FIELD32(0xffff0000)
/*
* TX_STA_CNT1: TX tx count
*/
#define TX_STA_CNT1 0x1710
#define TX_STA_CNT1_TX_SUCCESS FIELD32(0x0000ffff)
#define TX_STA_CNT1_TX_RETRANSMIT FIELD32(0xffff0000)
/*
* TX_STA_CNT2: TX tx count
*/
#define TX_STA_CNT2 0x1714
#define TX_STA_CNT2_TX_ZERO_LEN_COUNT FIELD32(0x0000ffff)
#define TX_STA_CNT2_TX_UNDER_FLOW_COUNT FIELD32(0xffff0000)
/*
* TX_STA_FIFO: TX Result for specific PID status fifo register.
*
* This register is implemented as FIFO with 16 entries in the HW. Each
* register read fetches the next tx result. If the FIFO is full because
* it wasn't read fast enough after the according interrupt (TX_FIFO_STATUS)
* triggered, the hw seems to simply drop further tx results.
*
* VALID: 1: this tx result is valid
* 0: no valid tx result -> driver should stop reading
* PID_TYPE: The PID latched from the PID field in the TXWI, can be used
* to match a frame with its tx result (even though the PID is
* only 4 bits wide).
* PID_QUEUE: Part of PID_TYPE, this is the queue index number (0-3)
* PID_ENTRY: Part of PID_TYPE, this is the queue entry index number (1-3)
* This identification number is calculated by ((idx % 3) + 1).
* TX_SUCCESS: Indicates tx success (1) or failure (0)
* TX_AGGRE: Indicates if the frame was part of an aggregate (1) or not (0)
* TX_ACK_REQUIRED: Indicates if the frame needed to get ack'ed (1) or not (0)
* WCID: The wireless client ID.
* MCS: The tx rate used during the last transmission of this frame, be it
* successful or not.
* PHYMODE: The phymode used for the transmission.
*/
#define TX_STA_FIFO 0x1718
#define TX_STA_FIFO_VALID FIELD32(0x00000001)
#define TX_STA_FIFO_PID_TYPE FIELD32(0x0000001e)
#define TX_STA_FIFO_PID_QUEUE FIELD32(0x00000006)
#define TX_STA_FIFO_PID_ENTRY FIELD32(0x00000018)
#define TX_STA_FIFO_TX_SUCCESS FIELD32(0x00000020)
#define TX_STA_FIFO_TX_AGGRE FIELD32(0x00000040)
#define TX_STA_FIFO_TX_ACK_REQUIRED FIELD32(0x00000080)
#define TX_STA_FIFO_WCID FIELD32(0x0000ff00)
#define TX_STA_FIFO_SUCCESS_RATE FIELD32(0xffff0000)
#define TX_STA_FIFO_MCS FIELD32(0x007f0000)
#define TX_STA_FIFO_BW FIELD32(0x00800000)
#define TX_STA_FIFO_SGI FIELD32(0x01000000)
#define TX_STA_FIFO_PHYMODE FIELD32(0xc0000000)
/*
* TX_AGG_CNT: Debug counter
*/
#define TX_AGG_CNT 0x171c
#define TX_AGG_CNT_NON_AGG_TX_COUNT FIELD32(0x0000ffff)
#define TX_AGG_CNT_AGG_TX_COUNT FIELD32(0xffff0000)
/*
* TX_AGG_CNT0:
*/
#define TX_AGG_CNT0 0x1720
#define TX_AGG_CNT0_AGG_SIZE_1_COUNT FIELD32(0x0000ffff)
#define TX_AGG_CNT0_AGG_SIZE_2_COUNT FIELD32(0xffff0000)
/*
* TX_AGG_CNT1:
*/
#define TX_AGG_CNT1 0x1724
#define TX_AGG_CNT1_AGG_SIZE_3_COUNT FIELD32(0x0000ffff)
#define TX_AGG_CNT1_AGG_SIZE_4_COUNT FIELD32(0xffff0000)
/*
* TX_AGG_CNT2:
*/
#define TX_AGG_CNT2 0x1728
#define TX_AGG_CNT2_AGG_SIZE_5_COUNT FIELD32(0x0000ffff)
#define TX_AGG_CNT2_AGG_SIZE_6_COUNT FIELD32(0xffff0000)
/*
* TX_AGG_CNT3:
*/
#define TX_AGG_CNT3 0x172c
#define TX_AGG_CNT3_AGG_SIZE_7_COUNT FIELD32(0x0000ffff)
#define TX_AGG_CNT3_AGG_SIZE_8_COUNT FIELD32(0xffff0000)
/*
* TX_AGG_CNT4:
*/
#define TX_AGG_CNT4 0x1730
#define TX_AGG_CNT4_AGG_SIZE_9_COUNT FIELD32(0x0000ffff)
#define TX_AGG_CNT4_AGG_SIZE_10_COUNT FIELD32(0xffff0000)
/*
* TX_AGG_CNT5:
*/
#define TX_AGG_CNT5 0x1734
#define TX_AGG_CNT5_AGG_SIZE_11_COUNT FIELD32(0x0000ffff)
#define TX_AGG_CNT5_AGG_SIZE_12_COUNT FIELD32(0xffff0000)
/*
* TX_AGG_CNT6:
*/
#define TX_AGG_CNT6 0x1738
#define TX_AGG_CNT6_AGG_SIZE_13_COUNT FIELD32(0x0000ffff)
#define TX_AGG_CNT6_AGG_SIZE_14_COUNT FIELD32(0xffff0000)
/*
* TX_AGG_CNT7:
*/
#define TX_AGG_CNT7 0x173c
#define TX_AGG_CNT7_AGG_SIZE_15_COUNT FIELD32(0x0000ffff)
#define TX_AGG_CNT7_AGG_SIZE_16_COUNT FIELD32(0xffff0000)
/*
* MPDU_DENSITY_CNT:
* TX_ZERO_DEL: TX zero length delimiter count
* RX_ZERO_DEL: RX zero length delimiter count
*/
#define MPDU_DENSITY_CNT 0x1740
#define MPDU_DENSITY_CNT_TX_ZERO_DEL FIELD32(0x0000ffff)
#define MPDU_DENSITY_CNT_RX_ZERO_DEL FIELD32(0xffff0000)
/*
* Security key table memory.
*
* The pairwise key table shares some memory with the beacon frame
* buffers 6 and 7. That basically means that when beacon 6 & 7
* are used we should only use the reduced pairwise key table which
* has a maximum of 222 entries.
*
* ---------------------------------------------
* |0x4000 | Pairwise Key | Reduced Pairwise |
* | | Table | Key Table |
* | | Size: 256 * 32 | Size: 222 * 32 |
* |0x5BC0 | |-------------------
* | | | Beacon 6 |
* |0x5DC0 | |-------------------
* | | | Beacon 7 |
* |0x5FC0 | |-------------------
* |0x5FFF | |
* --------------------------
*
* MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry
* PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry
* MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry
* MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry
* SHARED_KEY_TABLE_BASE: 32-byte * 16-entry
* SHARED_KEY_MODE_BASE: 4-byte * 16-entry
*/
#define MAC_WCID_BASE 0x1800
#define PAIRWISE_KEY_TABLE_BASE 0x4000
#define MAC_IVEIV_TABLE_BASE 0x6000
#define MAC_WCID_ATTRIBUTE_BASE 0x6800
#define SHARED_KEY_TABLE_BASE 0x6c00
#define SHARED_KEY_MODE_BASE 0x7000
#define MAC_WCID_ENTRY(__idx) \
(MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)))
#define PAIRWISE_KEY_ENTRY(__idx) \
(PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)))
#define MAC_IVEIV_ENTRY(__idx) \
(MAC_IVEIV_TABLE_BASE + ((__idx) * sizeof(struct mac_iveiv_entry)))
#define MAC_WCID_ATTR_ENTRY(__idx) \
(MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)))
#define SHARED_KEY_ENTRY(__idx) \
(SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)))
#define SHARED_KEY_MODE_ENTRY(__idx) \
(SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)))
struct mac_wcid_entry {
u8 mac[6];
u8 reserved[2];
} __packed;
struct hw_key_entry {
u8 key[16];
u8 tx_mic[8];
u8 rx_mic[8];
} __packed;
struct mac_iveiv_entry {
u8 iv[8];
} __packed;
/*
* MAC_WCID_ATTRIBUTE:
*/
#define MAC_WCID_ATTRIBUTE_KEYTAB FIELD32(0x00000001)
#define MAC_WCID_ATTRIBUTE_CIPHER FIELD32(0x0000000e)
#define MAC_WCID_ATTRIBUTE_BSS_IDX FIELD32(0x00000070)
#define MAC_WCID_ATTRIBUTE_RX_WIUDF FIELD32(0x00000380)
#define MAC_WCID_ATTRIBUTE_CIPHER_EXT FIELD32(0x00000400)
#define MAC_WCID_ATTRIBUTE_BSS_IDX_EXT FIELD32(0x00000800)
#define MAC_WCID_ATTRIBUTE_WAPI_MCBC FIELD32(0x00008000)
#define MAC_WCID_ATTRIBUTE_WAPI_KEY_IDX FIELD32(0xff000000)
/*
* SHARED_KEY_MODE:
*/
#define SHARED_KEY_MODE_BSS0_KEY0 FIELD32(0x00000007)
#define SHARED_KEY_MODE_BSS0_KEY1 FIELD32(0x00000070)
#define SHARED_KEY_MODE_BSS0_KEY2 FIELD32(0x00000700)
#define SHARED_KEY_MODE_BSS0_KEY3 FIELD32(0x00007000)
#define SHARED_KEY_MODE_BSS1_KEY0 FIELD32(0x00070000)
#define SHARED_KEY_MODE_BSS1_KEY1 FIELD32(0x00700000)
#define SHARED_KEY_MODE_BSS1_KEY2 FIELD32(0x07000000)
#define SHARED_KEY_MODE_BSS1_KEY3 FIELD32(0x70000000)
/*
* HOST-MCU communication
*/
/*
* H2M_MAILBOX_CSR: Host-to-MCU Mailbox.
* CMD_TOKEN: Command id, 0xff disable status reporting.
*/
#define H2M_MAILBOX_CSR 0x7010
#define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff)
#define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00)
#define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000)
#define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000)
/*
* H2M_MAILBOX_CID:
* Free slots contain 0xff. MCU will store command's token to lowest free slot.
* If all slots are occupied status will be dropped.
*/
#define H2M_MAILBOX_CID 0x7014
#define H2M_MAILBOX_CID_CMD0 FIELD32(0x000000ff)
#define H2M_MAILBOX_CID_CMD1 FIELD32(0x0000ff00)
#define H2M_MAILBOX_CID_CMD2 FIELD32(0x00ff0000)
#define H2M_MAILBOX_CID_CMD3 FIELD32(0xff000000)
/*
* H2M_MAILBOX_STATUS:
* Command status will be saved to same slot as command id.
*/
#define H2M_MAILBOX_STATUS 0x701c
/*
* H2M_INT_SRC:
*/
#define H2M_INT_SRC 0x7024
/*
* H2M_BBP_AGENT:
*/
#define H2M_BBP_AGENT 0x7028
/*
* MCU_LEDCS: LED control for MCU Mailbox.
*/
#define MCU_LEDCS_LED_MODE FIELD8(0x1f)
#define MCU_LEDCS_POLARITY FIELD8(0x01)
/*
* HW_CS_CTS_BASE:
* Carrier-sense CTS frame base address.
* It's where mac stores carrier-sense frame for carrier-sense function.
*/
#define HW_CS_CTS_BASE 0x7700
/*
* HW_DFS_CTS_BASE:
* DFS CTS frame base address. It's where mac stores CTS frame for DFS.
*/
#define HW_DFS_CTS_BASE 0x7780
/*
* TXRX control registers - base address 0x3000
*/
/*
* TXRX_CSR1:
* rt2860b UNKNOWN reg use R/O Reg Addr 0x77d0 first..
*/
#define TXRX_CSR1 0x77d0
/*
* HW_DEBUG_SETTING_BASE:
* since NULL frame won't be that long (256 byte)
* We steal 16 tail bytes to save debugging settings
*/
#define HW_DEBUG_SETTING_BASE 0x77f0
#define HW_DEBUG_SETTING_BASE2 0x7770
/*
* HW_BEACON_BASE
* In order to support maximum 8 MBSS and its maximum length
* is 512 bytes for each beacon
* Three section discontinue memory segments will be used.
* 1. The original region for BCN 0~3
* 2. Extract memory from FCE table for BCN 4~5
* 3. Extract memory from Pair-wise key table for BCN 6~7
* It occupied those memory of wcid 238~253 for BCN 6
* and wcid 222~237 for BCN 7 (see Security key table memory
* for more info).
*
* IMPORTANT NOTE: Not sure why legacy driver does this,
* but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6.
*/
#define HW_BEACON_BASE0 0x7800
#define HW_BEACON_BASE1 0x7a00
#define HW_BEACON_BASE2 0x7c00
#define HW_BEACON_BASE3 0x7e00
#define HW_BEACON_BASE4 0x7200
#define HW_BEACON_BASE5 0x7400
#define HW_BEACON_BASE6 0x5dc0
#define HW_BEACON_BASE7 0x5bc0
#define HW_BEACON_BASE(__index) \
(((__index) < 4) ? (HW_BEACON_BASE0 + (__index * 0x0200)) : \
(((__index) < 6) ? (HW_BEACON_BASE4 + ((__index - 4) * 0x0200)) : \
(HW_BEACON_BASE6 - ((__index - 6) * 0x0200))))
#define BEACON_BASE_TO_OFFSET(_base) (((_base) - 0x4000) / 64)
/*
* BBP registers.
* The wordsize of the BBP is 8 bits.
*/
/*
* BBP 1: TX Antenna & Power Control
* POWER_CTRL:
* 0 - normal,
* 1 - drop tx power by 6dBm,
* 2 - drop tx power by 12dBm,
* 3 - increase tx power by 6dBm
*/
#define BBP1_TX_POWER_CTRL FIELD8(0x03)
#define BBP1_TX_ANTENNA FIELD8(0x18)
/*
* BBP 3: RX Antenna
*/
#define BBP3_RX_ADC FIELD8(0x03)
#define BBP3_RX_ANTENNA FIELD8(0x18)
#define BBP3_HT40_MINUS FIELD8(0x20)
#define BBP3_ADC_MODE_SWITCH FIELD8(0x40)
#define BBP3_ADC_INIT_MODE FIELD8(0x80)
/*
* BBP 4: Bandwidth
*/
#define BBP4_TX_BF FIELD8(0x01)
#define BBP4_BANDWIDTH FIELD8(0x18)
#define BBP4_MAC_IF_CTRL FIELD8(0x40)
/* BBP27 */
#define BBP27_RX_CHAIN_SEL FIELD8(0x60)
/*
* BBP 47: Bandwidth
*/
#define BBP47_TSSI_REPORT_SEL FIELD8(0x03)
#define BBP47_TSSI_UPDATE_REQ FIELD8(0x04)
#define BBP47_TSSI_TSSI_MODE FIELD8(0x18)
#define BBP47_TSSI_ADC6 FIELD8(0x80)
/*
* BBP 49
*/
#define BBP49_UPDATE_FLAG FIELD8(0x01)
/*
* BBP 105:
* - bit0: detect SIG on primary channel only (on 40MHz bandwidth)
* - bit1: FEQ (Feed Forward Compensation) for independend streams
* - bit2: MLD (Maximum Likehood Detection) for 2 streams (reserved on single
* stream)
* - bit4: channel estimation updates based on remodulation of
* L-SIG and HT-SIG symbols
*/
#define BBP105_DETECT_SIG_ON_PRIMARY FIELD8(0x01)
#define BBP105_FEQ FIELD8(0x02)
#define BBP105_MLD FIELD8(0x04)
#define BBP105_SIG_REMODULATION FIELD8(0x08)
/*
* BBP 109
*/
#define BBP109_TX0_POWER FIELD8(0x0f)
#define BBP109_TX1_POWER FIELD8(0xf0)
/* BBP 110 */
#define BBP110_TX2_POWER FIELD8(0x0f)
/*
* BBP 138: Unknown
*/
#define BBP138_RX_ADC1 FIELD8(0x02)
#define BBP138_RX_ADC2 FIELD8(0x04)
#define BBP138_TX_DAC1 FIELD8(0x20)
#define BBP138_TX_DAC2 FIELD8(0x40)
/*
* BBP 152: Rx Ant
*/
#define BBP152_RX_DEFAULT_ANT FIELD8(0x80)
/*
* BBP 254: unknown
*/
#define BBP254_BIT7 FIELD8(0x80)
/*
* RFCSR registers
* The wordsize of the RFCSR is 8 bits.
*/
/*
* RFCSR 1:
*/
#define RFCSR1_RF_BLOCK_EN FIELD8(0x01)
#define RFCSR1_PLL_PD FIELD8(0x02)
#define RFCSR1_RX0_PD FIELD8(0x04)
#define RFCSR1_TX0_PD FIELD8(0x08)
#define RFCSR1_RX1_PD FIELD8(0x10)
#define RFCSR1_TX1_PD FIELD8(0x20)
#define RFCSR1_RX2_PD FIELD8(0x40)
#define RFCSR1_TX2_PD FIELD8(0x80)
#define RFCSR1_TX2_EN_MT7620 FIELD8(0x02)
/*
* RFCSR 2:
*/
#define RFCSR2_RESCAL_BP FIELD8(0x40)
#define RFCSR2_RESCAL_EN FIELD8(0x80)
#define RFCSR2_RX2_EN_MT7620 FIELD8(0x02)
#define RFCSR2_TX2_EN_MT7620 FIELD8(0x20)
/*
* RFCSR 3:
*/
#define RFCSR3_K FIELD8(0x0f)
/* Bits [7-4] for RF3320 (RT3370/RT3390), on other chipsets reserved */
#define RFCSR3_PA1_BIAS_CCK FIELD8(0x70)
#define RFCSR3_PA2_CASCODE_BIAS_CCKK FIELD8(0x80)
/* Bits for RF3290/RF5360/RF5362/RF5370/RF5372/RF5390/RF5392 */
#define RFCSR3_VCOCAL_EN FIELD8(0x80)
/* Bits for RF3050 */
#define RFCSR3_BIT1 FIELD8(0x02)
#define RFCSR3_BIT2 FIELD8(0x04)
#define RFCSR3_BIT3 FIELD8(0x08)
#define RFCSR3_BIT4 FIELD8(0x10)
#define RFCSR3_BIT5 FIELD8(0x20)
/*
* RFCSR 4:
* VCOCAL_EN used by MT7620
*/
#define RFCSR4_VCOCAL_EN FIELD8(0x80)
/*
* FRCSR 5:
*/
#define RFCSR5_R1 FIELD8(0x0c)
/*
* RFCSR 6:
*/
#define RFCSR6_R1 FIELD8(0x03)
#define RFCSR6_R2 FIELD8(0x40)
#define RFCSR6_TXDIV FIELD8(0x0c)
/* bits for RF3053 */
#define RFCSR6_VCO_IC FIELD8(0xc0)
/*
* RFCSR 7:
*/
#define RFCSR7_RF_TUNING FIELD8(0x01)
#define RFCSR7_BIT1 FIELD8(0x02)
#define RFCSR7_BIT2 FIELD8(0x04)
#define RFCSR7_BIT3 FIELD8(0x08)
#define RFCSR7_BIT4 FIELD8(0x10)
#define RFCSR7_BIT5 FIELD8(0x20)
#define RFCSR7_BITS67 FIELD8(0xc0)
/*
* RFCSR 9:
*/
#define RFCSR9_K FIELD8(0x0f)
#define RFCSR9_N FIELD8(0x10)
#define RFCSR9_UNKNOWN FIELD8(0x60)
#define RFCSR9_MOD FIELD8(0x80)
/*
* RFCSR 11:
*/
#define RFCSR11_R FIELD8(0x03)
#define RFCSR11_PLL_MOD FIELD8(0x0c)
#define RFCSR11_MOD FIELD8(0xc0)
/* bits for RF3053 */
/* TODO: verify RFCSR11_MOD usage on other chips */
#define RFCSR11_PLL_IDOH FIELD8(0x40)
/*
* RFCSR 12:
*/
#define RFCSR12_TX_POWER FIELD8(0x1f)
#define RFCSR12_DR0 FIELD8(0xe0)
/*
* RFCSR 13:
*/
#define RFCSR13_TX_POWER FIELD8(0x1f)
#define RFCSR13_DR0 FIELD8(0xe0)
#define RFCSR13_RDIV_MT7620 FIELD8(0x03)
/*
* RFCSR 15:
*/
#define RFCSR15_TX_LO2_EN FIELD8(0x08)
/*
* RFCSR 16:
*/
#define RFCSR16_TXMIXER_GAIN FIELD8(0x07)
#define RFCSR16_RF_PLL_FREQ_SEL_MT7620 FIELD8(0x0F)
#define RFCSR16_SDM_MODE_MT7620 FIELD8(0xE0)
/*
* RFCSR 17:
*/
#define RFCSR17_TXMIXER_GAIN FIELD8(0x07)
#define RFCSR17_TX_LO1_EN FIELD8(0x08)
#define RFCSR17_R FIELD8(0x20)
#define RFCSR17_CODE FIELD8(0x7f)
/* RFCSR 18 */
#define RFCSR18_XO_TUNE_BYPASS FIELD8(0x40)
/* RFCSR 19 */
#define RFCSR19_K FIELD8(0x03)
/*
* RFCSR 20:
*/
#define RFCSR20_RX_LO1_EN FIELD8(0x08)
/*
* RFCSR 21:
*/
#define RFCSR21_RX_LO2_EN FIELD8(0x08)
#define RFCSR21_BIT1 FIELD8(0x01)
#define RFCSR21_BIT8 FIELD8(0x80)
/*
* RFCSR 22:
*/
#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01)
#define RFCSR22_FREQPLAN_D_MT7620 FIELD8(0x07)
/*
* RFCSR 23:
*/
#define RFCSR23_FREQ_OFFSET FIELD8(0x7f)
/*
* RFCSR 24:
*/
#define RFCSR24_TX_AGC_FC FIELD8(0x1f)
#define RFCSR24_TX_H20M FIELD8(0x20)
#define RFCSR24_TX_CALIB FIELD8(0x7f)
/*
* RFCSR 27:
*/
#define RFCSR27_R1 FIELD8(0x03)
#define RFCSR27_R2 FIELD8(0x04)
#define RFCSR27_R3 FIELD8(0x30)
#define RFCSR27_R4 FIELD8(0x40)
/*
* RFCSR 28:
*/
#define RFCSR28_CH11_HT40 FIELD8(0x04)
/*
* RFCSR 29:
*/
#define RFCSR29_ADC6_TEST FIELD8(0x01)
#define RFCSR29_ADC6_INT_TEST FIELD8(0x02)
#define RFCSR29_RSSI_RESET FIELD8(0x04)
#define RFCSR29_RSSI_ON FIELD8(0x08)
#define RFCSR29_RSSI_RIP_CTRL FIELD8(0x30)
#define RFCSR29_RSSI_GAIN FIELD8(0xc0)
/*
* RFCSR 30:
*/
#define RFCSR30_TX_H20M FIELD8(0x02)
#define RFCSR30_RX_H20M FIELD8(0x04)
#define RFCSR30_RX_VCM FIELD8(0x18)
#define RFCSR30_RF_CALIBRATION FIELD8(0x80)
#define RF3322_RFCSR30_TX_H20M FIELD8(0x01)
#define RF3322_RFCSR30_RX_H20M FIELD8(0x02)
/*
* RFCSR 31:
*/
#define RFCSR31_RX_AGC_FC FIELD8(0x1f)
#define RFCSR31_RX_H20M FIELD8(0x20)
#define RFCSR31_RX_CALIB FIELD8(0x7f)
/* RFCSR 32 bits for RF3053 */
#define RFCSR32_TX_AGC_FC FIELD8(0xf8)
/* RFCSR 36 bits for RF3053 */
#define RFCSR36_RF_BS FIELD8(0x80)
/*
* RFCSR 34:
*/
#define RFCSR34_TX0_EXT_PA FIELD8(0x04)
#define RFCSR34_TX1_EXT_PA FIELD8(0x08)
/*
* RFCSR 38:
*/
#define RFCSR38_RX_LO1_EN FIELD8(0x20)
/*
* RFCSR 39:
*/
#define RFCSR39_RX_DIV FIELD8(0x40)
#define RFCSR39_RX_LO2_EN FIELD8(0x80)
/*
* RFCSR 41:
*/
#define RFCSR41_BIT1 FIELD8(0x01)
#define RFCSR41_BIT4 FIELD8(0x08)
/*
* RFCSR 42:
*/
#define RFCSR42_BIT1 FIELD8(0x01)
#define RFCSR42_BIT4 FIELD8(0x08)
#define RFCSR42_TX2_EN_MT7620 FIELD8(0x40)
/*
* RFCSR 49:
*/
#define RFCSR49_TX FIELD8(0x3f)
#define RFCSR49_EP FIELD8(0xc0)
/* bits for RT3593 */
#define RFCSR49_TX_LO1_IC FIELD8(0x1c)
#define RFCSR49_TX_DIV FIELD8(0x20)
/*
* RFCSR 50:
*/
#define RFCSR50_TX FIELD8(0x3f)
#define RFCSR50_TX0_EXT_PA FIELD8(0x02)
#define RFCSR50_TX1_EXT_PA FIELD8(0x10)
#define RFCSR50_EP FIELD8(0xc0)
/* bits for RT3593 */
#define RFCSR50_TX_LO1_EN FIELD8(0x20)
#define RFCSR50_TX_LO2_EN FIELD8(0x10)
/* RFCSR 51 */
/* bits for RT3593 */
#define RFCSR51_BITS01 FIELD8(0x03)
#define RFCSR51_BITS24 FIELD8(0x1c)
#define RFCSR51_BITS57 FIELD8(0xe0)
#define RFCSR53_TX_POWER FIELD8(0x3f)
#define RFCSR53_UNKNOWN FIELD8(0xc0)
#define RFCSR54_TX_POWER FIELD8(0x3f)
#define RFCSR54_UNKNOWN FIELD8(0xc0)
#define RFCSR55_TX_POWER FIELD8(0x3f)
#define RFCSR55_UNKNOWN FIELD8(0xc0)
#define RFCSR57_DRV_CC FIELD8(0xfc)
/*
* RF registers
*/
/*
* RF 2
*/
#define RF2_ANTENNA_RX2 FIELD32(0x00000040)
#define RF2_ANTENNA_TX1 FIELD32(0x00004000)
#define RF2_ANTENNA_RX1 FIELD32(0x00020000)
/*
* RF 3
*/
#define RF3_TXPOWER_G FIELD32(0x00003e00)
#define RF3_TXPOWER_A_7DBM_BOOST FIELD32(0x00000200)
#define RF3_TXPOWER_A FIELD32(0x00003c00)
/*
* RF 4
*/
#define RF4_TXPOWER_G FIELD32(0x000007c0)
#define RF4_TXPOWER_A_7DBM_BOOST FIELD32(0x00000040)
#define RF4_TXPOWER_A FIELD32(0x00000780)
#define RF4_FREQ_OFFSET FIELD32(0x001f8000)
#define RF4_HT40 FIELD32(0x00200000)
/*
* EEPROM content.
* The wordsize of the EEPROM is 16 bits.
*/
enum rt2800_eeprom_word {
EEPROM_CHIP_ID = 0,
EEPROM_VERSION,
EEPROM_MAC_ADDR_0,
EEPROM_MAC_ADDR_1,
EEPROM_MAC_ADDR_2,
EEPROM_NIC_CONF0,
EEPROM_NIC_CONF1,
EEPROM_FREQ,
EEPROM_LED_AG_CONF,
EEPROM_LED_ACT_CONF,
EEPROM_LED_POLARITY,
EEPROM_NIC_CONF2,
EEPROM_LNA,
EEPROM_RSSI_BG,
EEPROM_RSSI_BG2,
EEPROM_TXMIXER_GAIN_BG,
EEPROM_RSSI_A,
EEPROM_RSSI_A2,
EEPROM_TXMIXER_GAIN_A,
EEPROM_EIRP_MAX_TX_POWER,
EEPROM_TXPOWER_DELTA,
EEPROM_TXPOWER_BG1,
EEPROM_TXPOWER_BG2,
EEPROM_TSSI_BOUND_BG1,
EEPROM_TSSI_BOUND_BG2,
EEPROM_TSSI_BOUND_BG3,
EEPROM_TSSI_BOUND_BG4,
EEPROM_TSSI_BOUND_BG5,
EEPROM_TXPOWER_A1,
EEPROM_TXPOWER_A2,
EEPROM_TXPOWER_INIT,
EEPROM_TSSI_BOUND_A1,
EEPROM_TSSI_BOUND_A2,
EEPROM_TSSI_BOUND_A3,
EEPROM_TSSI_BOUND_A4,
EEPROM_TSSI_BOUND_A5,
EEPROM_TXPOWER_BYRATE,
EEPROM_BBP_START,
/* IDs for extended EEPROM format used by three-chain devices */
EEPROM_EXT_LNA2,
EEPROM_EXT_TXPOWER_BG3,
EEPROM_EXT_TXPOWER_A3,
/* New values must be added before this */
EEPROM_WORD_COUNT
};
/*
* EEPROM Version
*/
#define EEPROM_VERSION_FAE FIELD16(0x00ff)
#define EEPROM_VERSION_VERSION FIELD16(0xff00)
/*
* HW MAC address.
*/
#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff)
#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00)
#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff)
#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00)
#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff)
#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00)
/*
* EEPROM NIC Configuration 0
* RXPATH: 1: 1R, 2: 2R, 3: 3R
* TXPATH: 1: 1T, 2: 2T, 3: 3T
* RF_TYPE: RFIC type
*/
#define EEPROM_NIC_CONF0_RXPATH FIELD16(0x000f)
#define EEPROM_NIC_CONF0_TXPATH FIELD16(0x00f0)
#define EEPROM_NIC_CONF0_RF_TYPE FIELD16(0x0f00)
/*
* EEPROM NIC Configuration 1
* HW_RADIO: 0: disable, 1: enable
* EXTERNAL_TX_ALC: 0: disable, 1: enable
* EXTERNAL_LNA_2G: 0: disable, 1: enable
* EXTERNAL_LNA_5G: 0: disable, 1: enable
* CARDBUS_ACCEL: 0: enable, 1: disable
* BW40M_SB_2G: 0: disable, 1: enable
* BW40M_SB_5G: 0: disable, 1: enable
* WPS_PBC: 0: disable, 1: enable
* BW40M_2G: 0: enable, 1: disable
* BW40M_5G: 0: enable, 1: disable
* BROADBAND_EXT_LNA: 0: disable, 1: enable
* ANT_DIVERSITY: 00: Disable, 01: Diversity,
* 10: Main antenna, 11: Aux antenna
* INTERNAL_TX_ALC: 0: disable, 1: enable
* BT_COEXIST: 0: disable, 1: enable
* DAC_TEST: 0: disable, 1: enable
* EXTERNAL_TX0_PA: 0: disable, 1: enable (only on RT3352)
* EXTERNAL_TX1_PA: 0: disable, 1: enable (only on RT3352)
*/
#define EEPROM_NIC_CONF1_HW_RADIO FIELD16(0x0001)
#define EEPROM_NIC_CONF1_EXTERNAL_TX_ALC FIELD16(0x0002)
#define EEPROM_NIC_CONF1_EXTERNAL_LNA_2G FIELD16(0x0004)
#define EEPROM_NIC_CONF1_EXTERNAL_LNA_5G FIELD16(0x0008)
#define EEPROM_NIC_CONF1_CARDBUS_ACCEL FIELD16(0x0010)
#define EEPROM_NIC_CONF1_BW40M_SB_2G FIELD16(0x0020)
#define EEPROM_NIC_CONF1_BW40M_SB_5G FIELD16(0x0040)
#define EEPROM_NIC_CONF1_WPS_PBC FIELD16(0x0080)
#define EEPROM_NIC_CONF1_BW40M_2G FIELD16(0x0100)
#define EEPROM_NIC_CONF1_BW40M_5G FIELD16(0x0200)
#define EEPROM_NIC_CONF1_BROADBAND_EXT_LNA FIELD16(0x400)
#define EEPROM_NIC_CONF1_ANT_DIVERSITY FIELD16(0x1800)
#define EEPROM_NIC_CONF1_INTERNAL_TX_ALC FIELD16(0x2000)
#define EEPROM_NIC_CONF1_BT_COEXIST FIELD16(0x4000)
#define EEPROM_NIC_CONF1_DAC_TEST FIELD16(0x8000)
#define EEPROM_NIC_CONF1_EXTERNAL_TX0_PA_3352 FIELD16(0x4000)
#define EEPROM_NIC_CONF1_EXTERNAL_TX1_PA_3352 FIELD16(0x8000)
/*
* EEPROM frequency
*/
#define EEPROM_FREQ_OFFSET FIELD16(0x00ff)
#define EEPROM_FREQ_LED_MODE FIELD16(0x7f00)
#define EEPROM_FREQ_LED_POLARITY FIELD16(0x1000)
/*
* EEPROM LED
* POLARITY_RDY_G: Polarity RDY_G setting.
* POLARITY_RDY_A: Polarity RDY_A setting.
* POLARITY_ACT: Polarity ACT setting.
* POLARITY_GPIO_0: Polarity GPIO0 setting.
* POLARITY_GPIO_1: Polarity GPIO1 setting.
* POLARITY_GPIO_2: Polarity GPIO2 setting.
* POLARITY_GPIO_3: Polarity GPIO3 setting.
* POLARITY_GPIO_4: Polarity GPIO4 setting.
* LED_MODE: Led mode.
*/
#define EEPROM_LED_POLARITY_RDY_BG FIELD16(0x0001)
#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002)
#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004)
#define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008)
#define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010)
#define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020)
#define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040)
#define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080)
#define EEPROM_LED_LED_MODE FIELD16(0x1f00)
/*
* EEPROM NIC Configuration 2
* RX_STREAM: 0: Reserved, 1: 1 Stream, 2: 2 Stream
* TX_STREAM: 0: Reserved, 1: 1 Stream, 2: 2 Stream
* CRYSTAL: 00: Reserved, 01: One crystal, 10: Two crystal, 11: Reserved
*/
#define EEPROM_NIC_CONF2_RX_STREAM FIELD16(0x000f)
#define EEPROM_NIC_CONF2_TX_STREAM FIELD16(0x00f0)
#define EEPROM_NIC_CONF2_CRYSTAL FIELD16(0x0600)
#define EEPROM_NIC_CONF2_EXTERNAL_PA FIELD16(0x8000)
/*
* EEPROM LNA
*/
#define EEPROM_LNA_BG FIELD16(0x00ff)
#define EEPROM_LNA_A0 FIELD16(0xff00)
/*
* EEPROM RSSI BG offset
*/
#define EEPROM_RSSI_BG_OFFSET0 FIELD16(0x00ff)
#define EEPROM_RSSI_BG_OFFSET1 FIELD16(0xff00)
/*
* EEPROM RSSI BG2 offset
*/
#define EEPROM_RSSI_BG2_OFFSET2 FIELD16(0x00ff)
#define EEPROM_RSSI_BG2_LNA_A1 FIELD16(0xff00)
/*
* EEPROM TXMIXER GAIN BG offset (note overlaps with EEPROM RSSI BG2).
*/
#define EEPROM_TXMIXER_GAIN_BG_VAL FIELD16(0x0007)
/*
* EEPROM RSSI A offset
*/
#define EEPROM_RSSI_A_OFFSET0 FIELD16(0x00ff)
#define EEPROM_RSSI_A_OFFSET1 FIELD16(0xff00)
/*
* EEPROM RSSI A2 offset
*/
#define EEPROM_RSSI_A2_OFFSET2 FIELD16(0x00ff)
#define EEPROM_RSSI_A2_LNA_A2 FIELD16(0xff00)
/*
* EEPROM TXMIXER GAIN A offset (note overlaps with EEPROM RSSI A2).
*/
#define EEPROM_TXMIXER_GAIN_A_VAL FIELD16(0x0007)
/*
* EEPROM EIRP Maximum TX power values(unit: dbm)
*/
#define EEPROM_EIRP_MAX_TX_POWER_2GHZ FIELD16(0x00ff)
#define EEPROM_EIRP_MAX_TX_POWER_5GHZ FIELD16(0xff00)
/*
* EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power.
* This is delta in 40MHZ.
* VALUE: Tx Power dalta value, MAX=4(unit: dbm)
* TYPE: 1: Plus the delta value, 0: minus the delta value
* ENABLE: enable tx power compensation for 40BW
*/
#define EEPROM_TXPOWER_DELTA_VALUE_2G FIELD16(0x003f)
#define EEPROM_TXPOWER_DELTA_TYPE_2G FIELD16(0x0040)
#define EEPROM_TXPOWER_DELTA_ENABLE_2G FIELD16(0x0080)
#define EEPROM_TXPOWER_DELTA_VALUE_5G FIELD16(0x3f00)
#define EEPROM_TXPOWER_DELTA_TYPE_5G FIELD16(0x4000)
#define EEPROM_TXPOWER_DELTA_ENABLE_5G FIELD16(0x8000)
/*
* EEPROM TXPOWER 802.11BG
*/
#define EEPROM_TXPOWER_BG_SIZE 7
#define EEPROM_TXPOWER_BG_1 FIELD16(0x00ff)
#define EEPROM_TXPOWER_BG_2 FIELD16(0xff00)
/*
* EEPROM temperature compensation boundaries 802.11BG
* MINUS4: If the actual TSSI is below this boundary, tx power needs to be
* reduced by (agc_step * -4)
* MINUS3: If the actual TSSI is below this boundary, tx power needs to be
* reduced by (agc_step * -3)
*/
#define EEPROM_TSSI_BOUND_BG1_MINUS4 FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_BG1_MINUS3 FIELD16(0xff00)
/*
* EEPROM temperature compensation boundaries 802.11BG
* MINUS2: If the actual TSSI is below this boundary, tx power needs to be
* reduced by (agc_step * -2)
* MINUS1: If the actual TSSI is below this boundary, tx power needs to be
* reduced by (agc_step * -1)
*/
#define EEPROM_TSSI_BOUND_BG2_MINUS2 FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_BG2_MINUS1 FIELD16(0xff00)
/*
* EEPROM temperature compensation boundaries 802.11BG
* REF: Reference TSSI value, no tx power changes needed
* PLUS1: If the actual TSSI is above this boundary, tx power needs to be
* increased by (agc_step * 1)
*/
#define EEPROM_TSSI_BOUND_BG3_REF FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_BG3_PLUS1 FIELD16(0xff00)
/*
* EEPROM temperature compensation boundaries 802.11BG
* PLUS2: If the actual TSSI is above this boundary, tx power needs to be
* increased by (agc_step * 2)
* PLUS3: If the actual TSSI is above this boundary, tx power needs to be
* increased by (agc_step * 3)
*/
#define EEPROM_TSSI_BOUND_BG4_PLUS2 FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_BG4_PLUS3 FIELD16(0xff00)
/*
* EEPROM temperature compensation boundaries 802.11BG
* PLUS4: If the actual TSSI is above this boundary, tx power needs to be
* increased by (agc_step * 4)
* AGC_STEP: Temperature compensation step.
*/
#define EEPROM_TSSI_BOUND_BG5_PLUS4 FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_BG5_AGC_STEP FIELD16(0xff00)
/*
* EEPROM TXPOWER 802.11A
*/
#define EEPROM_TXPOWER_A_SIZE 6
#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff)
#define EEPROM_TXPOWER_A_2 FIELD16(0xff00)
/* EEPROM_TXPOWER_{A,G} fields for RT3593 */
#define EEPROM_TXPOWER_ALC FIELD8(0x1f)
#define EEPROM_TXPOWER_FINE_CTRL FIELD8(0xe0)
/*
* EEPROM temperature compensation boundaries 802.11A
* MINUS4: If the actual TSSI is below this boundary, tx power needs to be
* reduced by (agc_step * -4)
* MINUS3: If the actual TSSI is below this boundary, tx power needs to be
* reduced by (agc_step * -3)
*/
#define EEPROM_TSSI_BOUND_A1_MINUS4 FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_A1_MINUS3 FIELD16(0xff00)
/*
* EEPROM temperature compensation boundaries 802.11A
* MINUS2: If the actual TSSI is below this boundary, tx power needs to be
* reduced by (agc_step * -2)
* MINUS1: If the actual TSSI is below this boundary, tx power needs to be
* reduced by (agc_step * -1)
*/
#define EEPROM_TSSI_BOUND_A2_MINUS2 FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_A2_MINUS1 FIELD16(0xff00)
/*
* EEPROM temperature compensation boundaries 802.11A
* REF: Reference TSSI value, no tx power changes needed
* PLUS1: If the actual TSSI is above this boundary, tx power needs to be
* increased by (agc_step * 1)
*/
#define EEPROM_TSSI_BOUND_A3_REF FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_A3_PLUS1 FIELD16(0xff00)
/*
* EEPROM temperature compensation boundaries 802.11A
* PLUS2: If the actual TSSI is above this boundary, tx power needs to be
* increased by (agc_step * 2)
* PLUS3: If the actual TSSI is above this boundary, tx power needs to be
* increased by (agc_step * 3)
*/
#define EEPROM_TSSI_BOUND_A4_PLUS2 FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_A4_PLUS3 FIELD16(0xff00)
/*
* EEPROM temperature compensation boundaries 802.11A
* PLUS4: If the actual TSSI is above this boundary, tx power needs to be
* increased by (agc_step * 4)
* AGC_STEP: Temperature compensation step.
*/
#define EEPROM_TSSI_BOUND_A5_PLUS4 FIELD16(0x00ff)
#define EEPROM_TSSI_BOUND_A5_AGC_STEP FIELD16(0xff00)
/*
* EEPROM TXPOWER by rate: tx power per tx rate for HT20 mode
*/
#define EEPROM_TXPOWER_BYRATE_SIZE 9
#define EEPROM_TXPOWER_BYRATE_RATE0 FIELD16(0x000f)
#define EEPROM_TXPOWER_BYRATE_RATE1 FIELD16(0x00f0)
#define EEPROM_TXPOWER_BYRATE_RATE2 FIELD16(0x0f00)
#define EEPROM_TXPOWER_BYRATE_RATE3 FIELD16(0xf000)
/*
* EEPROM BBP.
*/
#define EEPROM_BBP_SIZE 16
#define EEPROM_BBP_VALUE FIELD16(0x00ff)
#define EEPROM_BBP_REG_ID FIELD16(0xff00)
/* EEPROM_EXT_LNA2 */
#define EEPROM_EXT_LNA2_A1 FIELD16(0x00ff)
#define EEPROM_EXT_LNA2_A2 FIELD16(0xff00)
/*
* EEPROM IQ Calibration, unlike other entries those are byte addresses.
*/
#define EEPROM_IQ_GAIN_CAL_TX0_2G 0x130
#define EEPROM_IQ_PHASE_CAL_TX0_2G 0x131
#define EEPROM_IQ_GROUPDELAY_CAL_TX0_2G 0x132
#define EEPROM_IQ_GAIN_CAL_TX1_2G 0x133
#define EEPROM_IQ_PHASE_CAL_TX1_2G 0x134
#define EEPROM_IQ_GROUPDELAY_CAL_TX1_2G 0x135
#define EEPROM_IQ_GAIN_CAL_RX0_2G 0x136
#define EEPROM_IQ_PHASE_CAL_RX0_2G 0x137
#define EEPROM_IQ_GROUPDELAY_CAL_RX0_2G 0x138
#define EEPROM_IQ_GAIN_CAL_RX1_2G 0x139
#define EEPROM_IQ_PHASE_CAL_RX1_2G 0x13A
#define EEPROM_IQ_GROUPDELAY_CAL_RX1_2G 0x13B
#define EEPROM_RF_IQ_COMPENSATION_CONTROL 0x13C
#define EEPROM_RF_IQ_IMBALANCE_COMPENSATION_CONTROL 0x13D
#define EEPROM_IQ_GAIN_CAL_TX0_CH36_TO_CH64_5G 0x144
#define EEPROM_IQ_PHASE_CAL_TX0_CH36_TO_CH64_5G 0x145
#define EEPROM_IQ_GAIN_CAL_TX0_CH100_TO_CH138_5G 0X146
#define EEPROM_IQ_PHASE_CAL_TX0_CH100_TO_CH138_5G 0x147
#define EEPROM_IQ_GAIN_CAL_TX0_CH140_TO_CH165_5G 0x148
#define EEPROM_IQ_PHASE_CAL_TX0_CH140_TO_CH165_5G 0x149
#define EEPROM_IQ_GAIN_CAL_TX1_CH36_TO_CH64_5G 0x14A
#define EEPROM_IQ_PHASE_CAL_TX1_CH36_TO_CH64_5G 0x14B
#define EEPROM_IQ_GAIN_CAL_TX1_CH100_TO_CH138_5G 0X14C
#define EEPROM_IQ_PHASE_CAL_TX1_CH100_TO_CH138_5G 0x14D
#define EEPROM_IQ_GAIN_CAL_TX1_CH140_TO_CH165_5G 0x14E
#define EEPROM_IQ_PHASE_CAL_TX1_CH140_TO_CH165_5G 0x14F
#define EEPROM_IQ_GROUPDELAY_CAL_TX0_CH36_TO_CH64_5G 0x150
#define EEPROM_IQ_GROUPDELAY_CAL_TX1_CH36_TO_CH64_5G 0x151
#define EEPROM_IQ_GROUPDELAY_CAL_TX0_CH100_TO_CH138_5G 0x152
#define EEPROM_IQ_GROUPDELAY_CAL_TX1_CH100_TO_CH138_5G 0x153
#define EEPROM_IQ_GROUPDELAY_CAL_TX0_CH140_TO_CH165_5G 0x154
#define EEPROM_IQ_GROUPDELAY_CAL_TX1_CH140_TO_CH165_5G 0x155
#define EEPROM_IQ_GAIN_CAL_RX0_CH36_TO_CH64_5G 0x156
#define EEPROM_IQ_PHASE_CAL_RX0_CH36_TO_CH64_5G 0x157
#define EEPROM_IQ_GAIN_CAL_RX0_CH100_TO_CH138_5G 0X158
#define EEPROM_IQ_PHASE_CAL_RX0_CH100_TO_CH138_5G 0x159
#define EEPROM_IQ_GAIN_CAL_RX0_CH140_TO_CH165_5G 0x15A
#define EEPROM_IQ_PHASE_CAL_RX0_CH140_TO_CH165_5G 0x15B
#define EEPROM_IQ_GAIN_CAL_RX1_CH36_TO_CH64_5G 0x15C
#define EEPROM_IQ_PHASE_CAL_RX1_CH36_TO_CH64_5G 0x15D
#define EEPROM_IQ_GAIN_CAL_RX1_CH100_TO_CH138_5G 0X15E
#define EEPROM_IQ_PHASE_CAL_RX1_CH100_TO_CH138_5G 0x15F
#define EEPROM_IQ_GAIN_CAL_RX1_CH140_TO_CH165_5G 0x160
#define EEPROM_IQ_PHASE_CAL_RX1_CH140_TO_CH165_5G 0x161
#define EEPROM_IQ_GROUPDELAY_CAL_RX0_CH36_TO_CH64_5G 0x162
#define EEPROM_IQ_GROUPDELAY_CAL_RX1_CH36_TO_CH64_5G 0x163
#define EEPROM_IQ_GROUPDELAY_CAL_RX0_CH100_TO_CH138_5G 0x164
#define EEPROM_IQ_GROUPDELAY_CAL_RX1_CH100_TO_CH138_5G 0x165
#define EEPROM_IQ_GROUPDELAY_CAL_RX0_CH140_TO_CH165_5G 0x166
#define EEPROM_IQ_GROUPDELAY_CAL_RX1_CH140_TO_CH165_5G 0x167
/*
* MCU mailbox commands.
* MCU_SLEEP - go to power-save mode.
* arg1: 1: save as much power as possible, 0: save less power.
* status: 1: success, 2: already asleep,
* 3: maybe MAC is busy so can't finish this task.
* MCU_RADIO_OFF
* arg0: 0: do power-saving, NOT turn off radio.
*/
#define MCU_SLEEP 0x30
#define MCU_WAKEUP 0x31
#define MCU_RADIO_OFF 0x35
#define MCU_CURRENT 0x36
#define MCU_LED 0x50
#define MCU_LED_STRENGTH 0x51
#define MCU_LED_AG_CONF 0x52
#define MCU_LED_ACT_CONF 0x53
#define MCU_LED_LED_POLARITY 0x54
#define MCU_RADAR 0x60
#define MCU_BOOT_SIGNAL 0x72
#define MCU_ANT_SELECT 0X73
#define MCU_FREQ_OFFSET 0x74
#define MCU_BBP_SIGNAL 0x80
#define MCU_POWER_SAVE 0x83
#define MCU_BAND_SELECT 0x91
/*
* MCU mailbox tokens
*/
#define TOKEN_SLEEP 1
#define TOKEN_RADIO_OFF 2
#define TOKEN_WAKEUP 3
/*
* DMA descriptor defines.
*/
#define TXWI_DESC_SIZE_4WORDS (4 * sizeof(__le32))
#define TXWI_DESC_SIZE_5WORDS (5 * sizeof(__le32))
#define RXWI_DESC_SIZE_4WORDS (4 * sizeof(__le32))
#define RXWI_DESC_SIZE_5WORDS (5 * sizeof(__le32))
#define RXWI_DESC_SIZE_6WORDS (6 * sizeof(__le32))
/*
* TX WI structure
*/
/*
* Word0
* FRAG: 1 To inform TKIP engine this is a fragment.
* MIMO_PS: The remote peer is in dynamic MIMO-PS mode
* TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs
* BW: Channel bandwidth 0:20MHz, 1:40 MHz (for legacy rates this will
* duplicate the frame to both channels).
* STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED
* AMPDU: 1: this frame is eligible for AMPDU aggregation, the hw will
* aggregate consecutive frames with the same RA and QoS TID. If
* a frame A with the same RA and QoS TID but AMPDU=0 is queued
* directly after a frame B with AMPDU=1, frame A might still
* get aggregated into the AMPDU started by frame B. So, setting
* AMPDU to 0 does _not_ necessarily mean the frame is sent as
* MPDU, it can still end up in an AMPDU if the previous frame
* was tagged as AMPDU.
*/
#define TXWI_W0_FRAG FIELD32(0x00000001)
#define TXWI_W0_MIMO_PS FIELD32(0x00000002)
#define TXWI_W0_CF_ACK FIELD32(0x00000004)
#define TXWI_W0_TS FIELD32(0x00000008)
#define TXWI_W0_AMPDU FIELD32(0x00000010)
#define TXWI_W0_MPDU_DENSITY FIELD32(0x000000e0)
#define TXWI_W0_TX_OP FIELD32(0x00000300)
#define TXWI_W0_MCS FIELD32(0x007f0000)
#define TXWI_W0_BW FIELD32(0x00800000)
#define TXWI_W0_SHORT_GI FIELD32(0x01000000)
#define TXWI_W0_STBC FIELD32(0x06000000)
#define TXWI_W0_IFS FIELD32(0x08000000)
#define TXWI_W0_PHYMODE FIELD32(0xc0000000)
/*
* Word1
* ACK: 0: No Ack needed, 1: Ack needed
* NSEQ: 0: Don't assign hw sequence number, 1: Assign hw sequence number
* BW_WIN_SIZE: BA windows size of the recipient
* WIRELESS_CLI_ID: Client ID for WCID table access
* MPDU_TOTAL_BYTE_COUNT: Length of 802.11 frame
* PACKETID: Will be latched into the TX_STA_FIFO register once the according
* frame was processed. If multiple frames are aggregated together
* (AMPDU==1) the reported tx status will always contain the packet
* id of the first frame. 0: Don't report tx status for this frame.
* PACKETID_QUEUE: Part of PACKETID, This is the queue index (0-3)
* PACKETID_ENTRY: Part of PACKETID, THis is the queue entry index (1-3)
* This identification number is calculated by ((idx % 3) + 1).
* The (+1) is required to prevent PACKETID to become 0.
*/
#define TXWI_W1_ACK FIELD32(0x00000001)
#define TXWI_W1_NSEQ FIELD32(0x00000002)
#define TXWI_W1_BW_WIN_SIZE FIELD32(0x000000fc)
#define TXWI_W1_WIRELESS_CLI_ID FIELD32(0x0000ff00)
#define TXWI_W1_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000)
#define TXWI_W1_PACKETID FIELD32(0xf0000000)
#define TXWI_W1_PACKETID_QUEUE FIELD32(0x30000000)
#define TXWI_W1_PACKETID_ENTRY FIELD32(0xc0000000)
/*
* Word2
*/
#define TXWI_W2_IV FIELD32(0xffffffff)
/*
* Word3
*/
#define TXWI_W3_EIV FIELD32(0xffffffff)
/*
* RX WI structure
*/
/*
* Word0
*/
#define RXWI_W0_WIRELESS_CLI_ID FIELD32(0x000000ff)
#define RXWI_W0_KEY_INDEX FIELD32(0x00000300)
#define RXWI_W0_BSSID FIELD32(0x00001c00)
#define RXWI_W0_UDF FIELD32(0x0000e000)
#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000)
#define RXWI_W0_TID FIELD32(0xf0000000)
/*
* Word1
*/
#define RXWI_W1_FRAG FIELD32(0x0000000f)
#define RXWI_W1_SEQUENCE FIELD32(0x0000fff0)
#define RXWI_W1_MCS FIELD32(0x007f0000)
#define RXWI_W1_BW FIELD32(0x00800000)
#define RXWI_W1_SHORT_GI FIELD32(0x01000000)
#define RXWI_W1_STBC FIELD32(0x06000000)
#define RXWI_W1_PHYMODE FIELD32(0xc0000000)
/*
* Word2
*/
#define RXWI_W2_RSSI0 FIELD32(0x000000ff)
#define RXWI_W2_RSSI1 FIELD32(0x0000ff00)
#define RXWI_W2_RSSI2 FIELD32(0x00ff0000)
/*
* Word3
*/
#define RXWI_W3_SNR0 FIELD32(0x000000ff)
#define RXWI_W3_SNR1 FIELD32(0x0000ff00)
/*
* Macros for converting txpower from EEPROM to mac80211 value
* and from mac80211 value to register value.
*/
#define MIN_G_TXPOWER 0
#define MIN_A_TXPOWER -7
#define MAX_G_TXPOWER 31
#define MAX_A_TXPOWER 15
#define DEFAULT_TXPOWER 5
#define MIN_A_TXPOWER_3593 0
#define MAX_A_TXPOWER_3593 31
#define TXPOWER_G_FROM_DEV(__txpower) \
((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
#define TXPOWER_A_FROM_DEV(__txpower) \
((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
/*
* Board's maximun TX power limitation
*/
#define EIRP_MAX_TX_POWER_LIMIT 0x50
/*
* Number of TBTT intervals after which we have to adjust
* the hw beacon timer.
*/
#define BCN_TBTT_OFFSET 64
/* Watchdog type mask */
#define RT2800_WATCHDOG_HANG BIT(0)
#define RT2800_WATCHDOG_DMA_BUSY BIT(1)
#endif /* RT2800_H */