| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Driver for Digigram VXpocket soundcards |
| * |
| * lowlevel routines for VXpocket soundcards |
| * |
| * Copyright (c) 2002 by Takashi Iwai <tiwai@suse.de> |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/firmware.h> |
| #include <linux/io.h> |
| #include <sound/core.h> |
| #include "vxpocket.h" |
| |
| |
| static const int vxp_reg_offset[VX_REG_MAX] = { |
| [VX_ICR] = 0x00, // ICR |
| [VX_CVR] = 0x01, // CVR |
| [VX_ISR] = 0x02, // ISR |
| [VX_IVR] = 0x03, // IVR |
| [VX_RXH] = 0x05, // RXH |
| [VX_RXM] = 0x06, // RXM |
| [VX_RXL] = 0x07, // RXL |
| [VX_DMA] = 0x04, // DMA |
| [VX_CDSP] = 0x08, // CDSP |
| [VX_LOFREQ] = 0x09, // LFREQ |
| [VX_HIFREQ] = 0x0a, // HFREQ |
| [VX_DATA] = 0x0b, // DATA |
| [VX_MICRO] = 0x0c, // MICRO |
| [VX_DIALOG] = 0x0d, // DIALOG |
| [VX_CSUER] = 0x0e, // CSUER |
| [VX_RUER] = 0x0f, // RUER |
| }; |
| |
| |
| static inline unsigned long vxp_reg_addr(struct vx_core *_chip, int reg) |
| { |
| struct snd_vxpocket *chip = to_vxpocket(_chip); |
| return chip->port + vxp_reg_offset[reg]; |
| } |
| |
| /* |
| * snd_vx_inb - read a byte from the register |
| * @offset: register offset |
| */ |
| static unsigned char vxp_inb(struct vx_core *chip, int offset) |
| { |
| return inb(vxp_reg_addr(chip, offset)); |
| } |
| |
| /* |
| * snd_vx_outb - write a byte on the register |
| * @offset: the register offset |
| * @val: the value to write |
| */ |
| static void vxp_outb(struct vx_core *chip, int offset, unsigned char val) |
| { |
| outb(val, vxp_reg_addr(chip, offset)); |
| } |
| |
| /* |
| * redefine macros to call directly |
| */ |
| #undef vx_inb |
| #define vx_inb(chip,reg) vxp_inb((struct vx_core *)(chip), VX_##reg) |
| #undef vx_outb |
| #define vx_outb(chip,reg,val) vxp_outb((struct vx_core *)(chip), VX_##reg,val) |
| |
| |
| /* |
| * vx_check_magic - check the magic word on xilinx |
| * |
| * returns zero if a magic word is detected, or a negative error code. |
| */ |
| static int vx_check_magic(struct vx_core *chip) |
| { |
| unsigned long end_time = jiffies + HZ / 5; |
| int c; |
| do { |
| c = vx_inb(chip, CDSP); |
| if (c == CDSP_MAGIC) |
| return 0; |
| msleep(10); |
| } while (time_after_eq(end_time, jiffies)); |
| snd_printk(KERN_ERR "cannot find xilinx magic word (%x)\n", c); |
| return -EIO; |
| } |
| |
| |
| /* |
| * vx_reset_dsp - reset the DSP |
| */ |
| |
| #define XX_DSP_RESET_WAIT_TIME 2 /* ms */ |
| |
| static void vxp_reset_dsp(struct vx_core *_chip) |
| { |
| struct snd_vxpocket *chip = to_vxpocket(_chip); |
| |
| /* set the reset dsp bit to 1 */ |
| vx_outb(chip, CDSP, chip->regCDSP | VXP_CDSP_DSP_RESET_MASK); |
| vx_inb(chip, CDSP); |
| mdelay(XX_DSP_RESET_WAIT_TIME); |
| /* reset the bit */ |
| chip->regCDSP &= ~VXP_CDSP_DSP_RESET_MASK; |
| vx_outb(chip, CDSP, chip->regCDSP); |
| vx_inb(chip, CDSP); |
| mdelay(XX_DSP_RESET_WAIT_TIME); |
| } |
| |
| /* |
| * reset codec bit |
| */ |
| static void vxp_reset_codec(struct vx_core *_chip) |
| { |
| struct snd_vxpocket *chip = to_vxpocket(_chip); |
| |
| /* Set the reset CODEC bit to 1. */ |
| vx_outb(chip, CDSP, chip->regCDSP | VXP_CDSP_CODEC_RESET_MASK); |
| vx_inb(chip, CDSP); |
| msleep(10); |
| /* Set the reset CODEC bit to 0. */ |
| chip->regCDSP &= ~VXP_CDSP_CODEC_RESET_MASK; |
| vx_outb(chip, CDSP, chip->regCDSP); |
| vx_inb(chip, CDSP); |
| msleep(1); |
| } |
| |
| /* |
| * vx_load_xilinx_binary - load the xilinx binary image |
| * the binary image is the binary array converted from the bitstream file. |
| */ |
| static int vxp_load_xilinx_binary(struct vx_core *_chip, const struct firmware *fw) |
| { |
| struct snd_vxpocket *chip = to_vxpocket(_chip); |
| unsigned int i; |
| int c; |
| int regCSUER, regRUER; |
| const unsigned char *image; |
| unsigned char data; |
| |
| /* Switch to programmation mode */ |
| chip->regDIALOG |= VXP_DLG_XILINX_REPROG_MASK; |
| vx_outb(chip, DIALOG, chip->regDIALOG); |
| |
| /* Save register CSUER and RUER */ |
| regCSUER = vx_inb(chip, CSUER); |
| regRUER = vx_inb(chip, RUER); |
| |
| /* reset HF0 and HF1 */ |
| vx_outb(chip, ICR, 0); |
| |
| /* Wait for answer HF2 equal to 1 */ |
| snd_printdd(KERN_DEBUG "check ISR_HF2\n"); |
| if (vx_check_isr(_chip, ISR_HF2, ISR_HF2, 20) < 0) |
| goto _error; |
| |
| /* set HF1 for loading xilinx binary */ |
| vx_outb(chip, ICR, ICR_HF1); |
| image = fw->data; |
| for (i = 0; i < fw->size; i++, image++) { |
| data = *image; |
| if (vx_wait_isr_bit(_chip, ISR_TX_EMPTY) < 0) |
| goto _error; |
| vx_outb(chip, TXL, data); |
| /* wait for reading */ |
| if (vx_wait_for_rx_full(_chip) < 0) |
| goto _error; |
| c = vx_inb(chip, RXL); |
| if (c != (int)data) |
| snd_printk(KERN_ERR "vxpocket: load xilinx mismatch at %d: 0x%x != 0x%x\n", i, c, (int)data); |
| } |
| |
| /* reset HF1 */ |
| vx_outb(chip, ICR, 0); |
| |
| /* wait for HF3 */ |
| if (vx_check_isr(_chip, ISR_HF3, ISR_HF3, 20) < 0) |
| goto _error; |
| |
| /* read the number of bytes received */ |
| if (vx_wait_for_rx_full(_chip) < 0) |
| goto _error; |
| |
| c = (int)vx_inb(chip, RXH) << 16; |
| c |= (int)vx_inb(chip, RXM) << 8; |
| c |= vx_inb(chip, RXL); |
| |
| snd_printdd(KERN_DEBUG "xilinx: dsp size received 0x%x, orig 0x%zx\n", c, fw->size); |
| |
| vx_outb(chip, ICR, ICR_HF0); |
| |
| /* TEMPO 250ms : wait until Xilinx is downloaded */ |
| msleep(300); |
| |
| /* test magical word */ |
| if (vx_check_magic(_chip) < 0) |
| goto _error; |
| |
| /* Restore register 0x0E and 0x0F (thus replacing COR and FCSR) */ |
| vx_outb(chip, CSUER, regCSUER); |
| vx_outb(chip, RUER, regRUER); |
| |
| /* Reset the Xilinx's signal enabling IO access */ |
| chip->regDIALOG |= VXP_DLG_XILINX_REPROG_MASK; |
| vx_outb(chip, DIALOG, chip->regDIALOG); |
| vx_inb(chip, DIALOG); |
| msleep(10); |
| chip->regDIALOG &= ~VXP_DLG_XILINX_REPROG_MASK; |
| vx_outb(chip, DIALOG, chip->regDIALOG); |
| vx_inb(chip, DIALOG); |
| |
| /* Reset of the Codec */ |
| vxp_reset_codec(_chip); |
| vx_reset_dsp(_chip); |
| |
| return 0; |
| |
| _error: |
| vx_outb(chip, CSUER, regCSUER); |
| vx_outb(chip, RUER, regRUER); |
| chip->regDIALOG &= ~VXP_DLG_XILINX_REPROG_MASK; |
| vx_outb(chip, DIALOG, chip->regDIALOG); |
| return -EIO; |
| } |
| |
| |
| /* |
| * vxp_load_dsp - load_dsp callback |
| */ |
| static int vxp_load_dsp(struct vx_core *vx, int index, const struct firmware *fw) |
| { |
| int err; |
| |
| switch (index) { |
| case 0: |
| /* xilinx boot */ |
| err = vx_check_magic(vx); |
| if (err < 0) |
| return err; |
| err = snd_vx_load_boot_image(vx, fw); |
| if (err < 0) |
| return err; |
| return 0; |
| case 1: |
| /* xilinx image */ |
| return vxp_load_xilinx_binary(vx, fw); |
| case 2: |
| /* DSP boot */ |
| return snd_vx_dsp_boot(vx, fw); |
| case 3: |
| /* DSP image */ |
| return snd_vx_dsp_load(vx, fw); |
| default: |
| snd_BUG(); |
| return -EINVAL; |
| } |
| } |
| |
| |
| /* |
| * vx_test_and_ack - test and acknowledge interrupt |
| * |
| * called from irq hander, too |
| * |
| * spinlock held! |
| */ |
| static int vxp_test_and_ack(struct vx_core *_chip) |
| { |
| struct snd_vxpocket *chip = to_vxpocket(_chip); |
| |
| /* not booted yet? */ |
| if (! (_chip->chip_status & VX_STAT_XILINX_LOADED)) |
| return -ENXIO; |
| |
| if (! (vx_inb(chip, DIALOG) & VXP_DLG_MEMIRQ_MASK)) |
| return -EIO; |
| |
| /* ok, interrupts generated, now ack it */ |
| /* set ACQUIT bit up and down */ |
| vx_outb(chip, DIALOG, chip->regDIALOG | VXP_DLG_ACK_MEMIRQ_MASK); |
| /* useless read just to spend some time and maintain |
| * the ACQUIT signal up for a while ( a bus cycle ) |
| */ |
| vx_inb(chip, DIALOG); |
| vx_outb(chip, DIALOG, chip->regDIALOG & ~VXP_DLG_ACK_MEMIRQ_MASK); |
| |
| return 0; |
| } |
| |
| |
| /* |
| * vx_validate_irq - enable/disable IRQ |
| */ |
| static void vxp_validate_irq(struct vx_core *_chip, int enable) |
| { |
| struct snd_vxpocket *chip = to_vxpocket(_chip); |
| |
| /* Set the interrupt enable bit to 1 in CDSP register */ |
| if (enable) |
| chip->regCDSP |= VXP_CDSP_VALID_IRQ_MASK; |
| else |
| chip->regCDSP &= ~VXP_CDSP_VALID_IRQ_MASK; |
| vx_outb(chip, CDSP, chip->regCDSP); |
| } |
| |
| /* |
| * vx_setup_pseudo_dma - set up the pseudo dma read/write mode. |
| * @do_write: 0 = read, 1 = set up for DMA write |
| */ |
| static void vx_setup_pseudo_dma(struct vx_core *_chip, int do_write) |
| { |
| struct snd_vxpocket *chip = to_vxpocket(_chip); |
| |
| /* Interrupt mode and HREQ pin enabled for host transmit / receive data transfers */ |
| vx_outb(chip, ICR, do_write ? ICR_TREQ : ICR_RREQ); |
| /* Reset the pseudo-dma register */ |
| vx_inb(chip, ISR); |
| vx_outb(chip, ISR, 0); |
| |
| /* Select DMA in read/write transfer mode and in 16-bit accesses */ |
| chip->regDIALOG |= VXP_DLG_DMA16_SEL_MASK; |
| chip->regDIALOG |= do_write ? VXP_DLG_DMAWRITE_SEL_MASK : VXP_DLG_DMAREAD_SEL_MASK; |
| vx_outb(chip, DIALOG, chip->regDIALOG); |
| |
| } |
| |
| /* |
| * vx_release_pseudo_dma - disable the pseudo-DMA mode |
| */ |
| static void vx_release_pseudo_dma(struct vx_core *_chip) |
| { |
| struct snd_vxpocket *chip = to_vxpocket(_chip); |
| |
| /* Disable DMA and 16-bit accesses */ |
| chip->regDIALOG &= ~(VXP_DLG_DMAWRITE_SEL_MASK| |
| VXP_DLG_DMAREAD_SEL_MASK| |
| VXP_DLG_DMA16_SEL_MASK); |
| vx_outb(chip, DIALOG, chip->regDIALOG); |
| /* HREQ pin disabled. */ |
| vx_outb(chip, ICR, 0); |
| } |
| |
| /* |
| * vx_pseudo_dma_write - write bulk data on pseudo-DMA mode |
| * @count: data length to transfer in bytes |
| * |
| * data size must be aligned to 6 bytes to ensure the 24bit alignment on DSP. |
| * NB: call with a certain lock! |
| */ |
| static void vxp_dma_write(struct vx_core *chip, struct snd_pcm_runtime *runtime, |
| struct vx_pipe *pipe, int count) |
| { |
| long port = vxp_reg_addr(chip, VX_DMA); |
| int offset = pipe->hw_ptr; |
| unsigned short *addr = (unsigned short *)(runtime->dma_area + offset); |
| |
| vx_setup_pseudo_dma(chip, 1); |
| if (offset + count >= pipe->buffer_bytes) { |
| int length = pipe->buffer_bytes - offset; |
| count -= length; |
| length >>= 1; /* in 16bit words */ |
| /* Transfer using pseudo-dma. */ |
| for (; length > 0; length--) { |
| outw(*addr, port); |
| addr++; |
| } |
| addr = (unsigned short *)runtime->dma_area; |
| pipe->hw_ptr = 0; |
| } |
| pipe->hw_ptr += count; |
| count >>= 1; /* in 16bit words */ |
| /* Transfer using pseudo-dma. */ |
| for (; count > 0; count--) { |
| outw(*addr, port); |
| addr++; |
| } |
| vx_release_pseudo_dma(chip); |
| } |
| |
| |
| /* |
| * vx_pseudo_dma_read - read bulk data on pseudo DMA mode |
| * @offset: buffer offset in bytes |
| * @count: data length to transfer in bytes |
| * |
| * the read length must be aligned to 6 bytes, as well as write. |
| * NB: call with a certain lock! |
| */ |
| static void vxp_dma_read(struct vx_core *chip, struct snd_pcm_runtime *runtime, |
| struct vx_pipe *pipe, int count) |
| { |
| struct snd_vxpocket *pchip = to_vxpocket(chip); |
| long port = vxp_reg_addr(chip, VX_DMA); |
| int offset = pipe->hw_ptr; |
| unsigned short *addr = (unsigned short *)(runtime->dma_area + offset); |
| |
| if (snd_BUG_ON(count % 2)) |
| return; |
| vx_setup_pseudo_dma(chip, 0); |
| if (offset + count >= pipe->buffer_bytes) { |
| int length = pipe->buffer_bytes - offset; |
| count -= length; |
| length >>= 1; /* in 16bit words */ |
| /* Transfer using pseudo-dma. */ |
| for (; length > 0; length--) |
| *addr++ = inw(port); |
| addr = (unsigned short *)runtime->dma_area; |
| pipe->hw_ptr = 0; |
| } |
| pipe->hw_ptr += count; |
| count >>= 1; /* in 16bit words */ |
| /* Transfer using pseudo-dma. */ |
| for (; count > 1; count--) |
| *addr++ = inw(port); |
| /* Disable DMA */ |
| pchip->regDIALOG &= ~VXP_DLG_DMAREAD_SEL_MASK; |
| vx_outb(chip, DIALOG, pchip->regDIALOG); |
| /* Read the last word (16 bits) */ |
| *addr = inw(port); |
| /* Disable 16-bit accesses */ |
| pchip->regDIALOG &= ~VXP_DLG_DMA16_SEL_MASK; |
| vx_outb(chip, DIALOG, pchip->regDIALOG); |
| /* HREQ pin disabled. */ |
| vx_outb(chip, ICR, 0); |
| } |
| |
| |
| /* |
| * write a codec data (24bit) |
| */ |
| static void vxp_write_codec_reg(struct vx_core *chip, int codec, unsigned int data) |
| { |
| int i; |
| |
| /* Activate access to the corresponding codec register */ |
| if (! codec) |
| vx_inb(chip, LOFREQ); |
| else |
| vx_inb(chip, CODEC2); |
| |
| /* We have to send 24 bits (3 x 8 bits). Start with most signif. Bit */ |
| for (i = 0; i < 24; i++, data <<= 1) |
| vx_outb(chip, DATA, ((data & 0x800000) ? VX_DATA_CODEC_MASK : 0)); |
| |
| /* Terminate access to codec registers */ |
| vx_inb(chip, HIFREQ); |
| } |
| |
| |
| /* |
| * vx_set_mic_boost - set mic boost level (on vxp440 only) |
| * @boost: 0 = 20dB, 1 = +38dB |
| */ |
| void vx_set_mic_boost(struct vx_core *chip, int boost) |
| { |
| struct snd_vxpocket *pchip = to_vxpocket(chip); |
| |
| if (chip->chip_status & VX_STAT_IS_STALE) |
| return; |
| |
| mutex_lock(&chip->lock); |
| if (pchip->regCDSP & P24_CDSP_MICS_SEL_MASK) { |
| if (boost) { |
| /* boost: 38 dB */ |
| pchip->regCDSP &= ~P24_CDSP_MIC20_SEL_MASK; |
| pchip->regCDSP |= P24_CDSP_MIC38_SEL_MASK; |
| } else { |
| /* minimum value: 20 dB */ |
| pchip->regCDSP |= P24_CDSP_MIC20_SEL_MASK; |
| pchip->regCDSP &= ~P24_CDSP_MIC38_SEL_MASK; |
| } |
| vx_outb(chip, CDSP, pchip->regCDSP); |
| } |
| mutex_unlock(&chip->lock); |
| } |
| |
| /* |
| * remap the linear value (0-8) to the actual value (0-15) |
| */ |
| static int vx_compute_mic_level(int level) |
| { |
| switch (level) { |
| case 5: level = 6 ; break; |
| case 6: level = 8 ; break; |
| case 7: level = 11; break; |
| case 8: level = 15; break; |
| default: break ; |
| } |
| return level; |
| } |
| |
| /* |
| * vx_set_mic_level - set mic level (on vxpocket only) |
| * @level: the mic level = 0 - 8 (max) |
| */ |
| void vx_set_mic_level(struct vx_core *chip, int level) |
| { |
| struct snd_vxpocket *pchip = to_vxpocket(chip); |
| |
| if (chip->chip_status & VX_STAT_IS_STALE) |
| return; |
| |
| mutex_lock(&chip->lock); |
| if (pchip->regCDSP & VXP_CDSP_MIC_SEL_MASK) { |
| level = vx_compute_mic_level(level); |
| vx_outb(chip, MICRO, level); |
| } |
| mutex_unlock(&chip->lock); |
| } |
| |
| |
| /* |
| * change the input audio source |
| */ |
| static void vxp_change_audio_source(struct vx_core *_chip, int src) |
| { |
| struct snd_vxpocket *chip = to_vxpocket(_chip); |
| |
| switch (src) { |
| case VX_AUDIO_SRC_DIGITAL: |
| chip->regCDSP |= VXP_CDSP_DATAIN_SEL_MASK; |
| vx_outb(chip, CDSP, chip->regCDSP); |
| break; |
| case VX_AUDIO_SRC_LINE: |
| chip->regCDSP &= ~VXP_CDSP_DATAIN_SEL_MASK; |
| if (_chip->type == VX_TYPE_VXP440) |
| chip->regCDSP &= ~P24_CDSP_MICS_SEL_MASK; |
| else |
| chip->regCDSP &= ~VXP_CDSP_MIC_SEL_MASK; |
| vx_outb(chip, CDSP, chip->regCDSP); |
| break; |
| case VX_AUDIO_SRC_MIC: |
| chip->regCDSP &= ~VXP_CDSP_DATAIN_SEL_MASK; |
| /* reset mic levels */ |
| if (_chip->type == VX_TYPE_VXP440) { |
| chip->regCDSP &= ~P24_CDSP_MICS_SEL_MASK; |
| if (chip->mic_level) |
| chip->regCDSP |= P24_CDSP_MIC38_SEL_MASK; |
| else |
| chip->regCDSP |= P24_CDSP_MIC20_SEL_MASK; |
| vx_outb(chip, CDSP, chip->regCDSP); |
| } else { |
| chip->regCDSP |= VXP_CDSP_MIC_SEL_MASK; |
| vx_outb(chip, CDSP, chip->regCDSP); |
| vx_outb(chip, MICRO, vx_compute_mic_level(chip->mic_level)); |
| } |
| break; |
| } |
| } |
| |
| /* |
| * change the clock source |
| * source = INTERNAL_QUARTZ or UER_SYNC |
| */ |
| static void vxp_set_clock_source(struct vx_core *_chip, int source) |
| { |
| struct snd_vxpocket *chip = to_vxpocket(_chip); |
| |
| if (source == INTERNAL_QUARTZ) |
| chip->regCDSP &= ~VXP_CDSP_CLOCKIN_SEL_MASK; |
| else |
| chip->regCDSP |= VXP_CDSP_CLOCKIN_SEL_MASK; |
| vx_outb(chip, CDSP, chip->regCDSP); |
| } |
| |
| |
| /* |
| * reset the board |
| */ |
| static void vxp_reset_board(struct vx_core *_chip, int cold_reset) |
| { |
| struct snd_vxpocket *chip = to_vxpocket(_chip); |
| |
| chip->regCDSP = 0; |
| chip->regDIALOG = 0; |
| } |
| |
| |
| /* |
| * callbacks |
| */ |
| /* exported */ |
| const struct snd_vx_ops snd_vxpocket_ops = { |
| .in8 = vxp_inb, |
| .out8 = vxp_outb, |
| .test_and_ack = vxp_test_and_ack, |
| .validate_irq = vxp_validate_irq, |
| .write_codec = vxp_write_codec_reg, |
| .reset_codec = vxp_reset_codec, |
| .change_audio_source = vxp_change_audio_source, |
| .set_clock_source = vxp_set_clock_source, |
| .load_dsp = vxp_load_dsp, |
| .add_controls = vxp_add_mic_controls, |
| .reset_dsp = vxp_reset_dsp, |
| .reset_board = vxp_reset_board, |
| .dma_write = vxp_dma_write, |
| .dma_read = vxp_dma_read, |
| }; |