| /* |
| * Samsung Standard Definition Output (SDO) driver |
| * |
| * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. |
| * |
| * Tomasz Stanislawski, <t.stanislaws@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published |
| * by the Free Software Foundiation. either version 2 of the License, |
| * or (at your option) any later version |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/slab.h> |
| |
| #include <media/v4l2-subdev.h> |
| |
| #include "regs-sdo.h" |
| |
| MODULE_AUTHOR("Tomasz Stanislawski, <t.stanislaws@samsung.com>"); |
| MODULE_DESCRIPTION("Samsung Standard Definition Output (SDO)"); |
| MODULE_LICENSE("GPL"); |
| |
| #define SDO_DEFAULT_STD V4L2_STD_PAL |
| |
| struct sdo_format { |
| v4l2_std_id id; |
| /* all modes are 720 pixels wide */ |
| unsigned int height; |
| unsigned int cookie; |
| }; |
| |
| struct sdo_device { |
| /** pointer to device parent */ |
| struct device *dev; |
| /** base address of SDO registers */ |
| void __iomem *regs; |
| /** SDO interrupt */ |
| unsigned int irq; |
| /** DAC source clock */ |
| struct clk *sclk_dac; |
| /** DAC clock */ |
| struct clk *dac; |
| /** DAC physical interface */ |
| struct clk *dacphy; |
| /** clock for control of VPLL */ |
| struct clk *fout_vpll; |
| /** regulator for SDO IP power */ |
| struct regulator *vdac; |
| /** regulator for SDO plug detection */ |
| struct regulator *vdet; |
| /** subdev used as device interface */ |
| struct v4l2_subdev sd; |
| /** current format */ |
| const struct sdo_format *fmt; |
| }; |
| |
| static inline struct sdo_device *sd_to_sdev(struct v4l2_subdev *sd) |
| { |
| return container_of(sd, struct sdo_device, sd); |
| } |
| |
| static inline |
| void sdo_write_mask(struct sdo_device *sdev, u32 reg_id, u32 value, u32 mask) |
| { |
| u32 old = readl(sdev->regs + reg_id); |
| value = (value & mask) | (old & ~mask); |
| writel(value, sdev->regs + reg_id); |
| } |
| |
| static inline |
| void sdo_write(struct sdo_device *sdev, u32 reg_id, u32 value) |
| { |
| writel(value, sdev->regs + reg_id); |
| } |
| |
| static inline |
| u32 sdo_read(struct sdo_device *sdev, u32 reg_id) |
| { |
| return readl(sdev->regs + reg_id); |
| } |
| |
| static irqreturn_t sdo_irq_handler(int irq, void *dev_data) |
| { |
| struct sdo_device *sdev = dev_data; |
| |
| /* clear interrupt */ |
| sdo_write_mask(sdev, SDO_IRQ, ~0, SDO_VSYNC_IRQ_PEND); |
| return IRQ_HANDLED; |
| } |
| |
| static void sdo_reg_debug(struct sdo_device *sdev) |
| { |
| #define DBGREG(reg_id) \ |
| dev_info(sdev->dev, #reg_id " = %08x\n", \ |
| sdo_read(sdev, reg_id)) |
| |
| DBGREG(SDO_CLKCON); |
| DBGREG(SDO_CONFIG); |
| DBGREG(SDO_VBI); |
| DBGREG(SDO_DAC); |
| DBGREG(SDO_IRQ); |
| DBGREG(SDO_IRQMASK); |
| DBGREG(SDO_VERSION); |
| } |
| |
| static const struct sdo_format sdo_format[] = { |
| { V4L2_STD_PAL_N, .height = 576, .cookie = SDO_PAL_N }, |
| { V4L2_STD_PAL_Nc, .height = 576, .cookie = SDO_PAL_NC }, |
| { V4L2_STD_PAL_M, .height = 480, .cookie = SDO_PAL_M }, |
| { V4L2_STD_PAL_60, .height = 480, .cookie = SDO_PAL_60 }, |
| { V4L2_STD_NTSC_443, .height = 480, .cookie = SDO_NTSC_443 }, |
| { V4L2_STD_PAL, .height = 576, .cookie = SDO_PAL_BGHID }, |
| { V4L2_STD_NTSC_M, .height = 480, .cookie = SDO_NTSC_M }, |
| }; |
| |
| static const struct sdo_format *sdo_find_format(v4l2_std_id id) |
| { |
| int i; |
| for (i = 0; i < ARRAY_SIZE(sdo_format); ++i) |
| if (sdo_format[i].id & id) |
| return &sdo_format[i]; |
| return NULL; |
| } |
| |
| static int sdo_g_tvnorms_output(struct v4l2_subdev *sd, v4l2_std_id *std) |
| { |
| *std = V4L2_STD_NTSC_M | V4L2_STD_PAL_M | V4L2_STD_PAL | |
| V4L2_STD_PAL_N | V4L2_STD_PAL_Nc | |
| V4L2_STD_NTSC_443 | V4L2_STD_PAL_60; |
| return 0; |
| } |
| |
| static int sdo_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) |
| { |
| struct sdo_device *sdev = sd_to_sdev(sd); |
| const struct sdo_format *fmt; |
| fmt = sdo_find_format(std); |
| if (fmt == NULL) |
| return -EINVAL; |
| sdev->fmt = fmt; |
| return 0; |
| } |
| |
| static int sdo_g_std_output(struct v4l2_subdev *sd, v4l2_std_id *std) |
| { |
| *std = sd_to_sdev(sd)->fmt->id; |
| return 0; |
| } |
| |
| static int sdo_g_mbus_fmt(struct v4l2_subdev *sd, |
| struct v4l2_mbus_framefmt *fmt) |
| { |
| struct sdo_device *sdev = sd_to_sdev(sd); |
| |
| if (!sdev->fmt) |
| return -ENXIO; |
| /* all modes are 720 pixels wide */ |
| fmt->width = 720; |
| fmt->height = sdev->fmt->height; |
| fmt->code = V4L2_MBUS_FMT_FIXED; |
| fmt->field = V4L2_FIELD_INTERLACED; |
| return 0; |
| } |
| |
| static int sdo_s_power(struct v4l2_subdev *sd, int on) |
| { |
| struct sdo_device *sdev = sd_to_sdev(sd); |
| struct device *dev = sdev->dev; |
| int ret; |
| |
| dev_info(dev, "sdo_s_power(%d)\n", on); |
| |
| if (on) |
| ret = pm_runtime_get_sync(dev); |
| else |
| ret = pm_runtime_put_sync(dev); |
| |
| /* only values < 0 indicate errors */ |
| return IS_ERR_VALUE(ret) ? ret : 0; |
| } |
| |
| static int sdo_streamon(struct sdo_device *sdev) |
| { |
| /* set proper clock for Timing Generator */ |
| clk_set_rate(sdev->fout_vpll, 54000000); |
| dev_info(sdev->dev, "fout_vpll.rate = %lu\n", |
| clk_get_rate(sdev->fout_vpll)); |
| /* enable clock in SDO */ |
| sdo_write_mask(sdev, SDO_CLKCON, ~0, SDO_TVOUT_CLOCK_ON); |
| clk_enable(sdev->dacphy); |
| /* enable DAC */ |
| sdo_write_mask(sdev, SDO_DAC, ~0, SDO_POWER_ON_DAC); |
| sdo_reg_debug(sdev); |
| return 0; |
| } |
| |
| static int sdo_streamoff(struct sdo_device *sdev) |
| { |
| int tries; |
| |
| sdo_write_mask(sdev, SDO_DAC, 0, SDO_POWER_ON_DAC); |
| clk_disable(sdev->dacphy); |
| sdo_write_mask(sdev, SDO_CLKCON, 0, SDO_TVOUT_CLOCK_ON); |
| for (tries = 100; tries; --tries) { |
| if (sdo_read(sdev, SDO_CLKCON) & SDO_TVOUT_CLOCK_READY) |
| break; |
| mdelay(1); |
| } |
| if (tries == 0) |
| dev_err(sdev->dev, "failed to stop streaming\n"); |
| return tries ? 0 : -EIO; |
| } |
| |
| static int sdo_s_stream(struct v4l2_subdev *sd, int on) |
| { |
| struct sdo_device *sdev = sd_to_sdev(sd); |
| return on ? sdo_streamon(sdev) : sdo_streamoff(sdev); |
| } |
| |
| static const struct v4l2_subdev_core_ops sdo_sd_core_ops = { |
| .s_power = sdo_s_power, |
| }; |
| |
| static const struct v4l2_subdev_video_ops sdo_sd_video_ops = { |
| .s_std_output = sdo_s_std_output, |
| .g_std_output = sdo_g_std_output, |
| .g_tvnorms_output = sdo_g_tvnorms_output, |
| .g_mbus_fmt = sdo_g_mbus_fmt, |
| .s_stream = sdo_s_stream, |
| }; |
| |
| static const struct v4l2_subdev_ops sdo_sd_ops = { |
| .core = &sdo_sd_core_ops, |
| .video = &sdo_sd_video_ops, |
| }; |
| |
| static int sdo_runtime_suspend(struct device *dev) |
| { |
| struct v4l2_subdev *sd = dev_get_drvdata(dev); |
| struct sdo_device *sdev = sd_to_sdev(sd); |
| |
| dev_info(dev, "suspend\n"); |
| regulator_disable(sdev->vdet); |
| regulator_disable(sdev->vdac); |
| clk_disable(sdev->sclk_dac); |
| return 0; |
| } |
| |
| static int sdo_runtime_resume(struct device *dev) |
| { |
| struct v4l2_subdev *sd = dev_get_drvdata(dev); |
| struct sdo_device *sdev = sd_to_sdev(sd); |
| |
| dev_info(dev, "resume\n"); |
| clk_enable(sdev->sclk_dac); |
| regulator_enable(sdev->vdac); |
| regulator_enable(sdev->vdet); |
| |
| /* software reset */ |
| sdo_write_mask(sdev, SDO_CLKCON, ~0, SDO_TVOUT_SW_RESET); |
| mdelay(10); |
| sdo_write_mask(sdev, SDO_CLKCON, 0, SDO_TVOUT_SW_RESET); |
| |
| /* setting TV mode */ |
| sdo_write_mask(sdev, SDO_CONFIG, sdev->fmt->cookie, SDO_STANDARD_MASK); |
| /* XXX: forcing interlaced mode using undocumented bit */ |
| sdo_write_mask(sdev, SDO_CONFIG, 0, SDO_PROGRESSIVE); |
| /* turn all VBI off */ |
| sdo_write_mask(sdev, SDO_VBI, 0, SDO_CVBS_WSS_INS | |
| SDO_CVBS_CLOSED_CAPTION_MASK); |
| /* turn all post processing off */ |
| sdo_write_mask(sdev, SDO_CCCON, ~0, SDO_COMPENSATION_BHS_ADJ_OFF | |
| SDO_COMPENSATION_CVBS_COMP_OFF); |
| sdo_reg_debug(sdev); |
| return 0; |
| } |
| |
| static const struct dev_pm_ops sdo_pm_ops = { |
| .runtime_suspend = sdo_runtime_suspend, |
| .runtime_resume = sdo_runtime_resume, |
| }; |
| |
| static int __devinit sdo_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct sdo_device *sdev; |
| struct resource *res; |
| int ret = 0; |
| struct clk *sclk_vpll; |
| |
| dev_info(dev, "probe start\n"); |
| sdev = kzalloc(sizeof *sdev, GFP_KERNEL); |
| if (!sdev) { |
| dev_err(dev, "not enough memory.\n"); |
| ret = -ENOMEM; |
| goto fail; |
| } |
| sdev->dev = dev; |
| |
| /* mapping registers */ |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (res == NULL) { |
| dev_err(dev, "get memory resource failed.\n"); |
| ret = -ENXIO; |
| goto fail_sdev; |
| } |
| |
| sdev->regs = ioremap(res->start, resource_size(res)); |
| if (sdev->regs == NULL) { |
| dev_err(dev, "register mapping failed.\n"); |
| ret = -ENXIO; |
| goto fail_sdev; |
| } |
| |
| /* acquiring interrupt */ |
| res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| if (res == NULL) { |
| dev_err(dev, "get interrupt resource failed.\n"); |
| ret = -ENXIO; |
| goto fail_regs; |
| } |
| ret = request_irq(res->start, sdo_irq_handler, 0, "s5p-sdo", sdev); |
| if (ret) { |
| dev_err(dev, "request interrupt failed.\n"); |
| goto fail_regs; |
| } |
| sdev->irq = res->start; |
| |
| /* acquire clocks */ |
| sdev->sclk_dac = clk_get(dev, "sclk_dac"); |
| if (IS_ERR_OR_NULL(sdev->sclk_dac)) { |
| dev_err(dev, "failed to get clock 'sclk_dac'\n"); |
| ret = -ENXIO; |
| goto fail_irq; |
| } |
| sdev->dac = clk_get(dev, "dac"); |
| if (IS_ERR_OR_NULL(sdev->dac)) { |
| dev_err(dev, "failed to get clock 'dac'\n"); |
| ret = -ENXIO; |
| goto fail_sclk_dac; |
| } |
| sdev->dacphy = clk_get(dev, "dacphy"); |
| if (IS_ERR_OR_NULL(sdev->dacphy)) { |
| dev_err(dev, "failed to get clock 'dacphy'\n"); |
| ret = -ENXIO; |
| goto fail_dac; |
| } |
| sclk_vpll = clk_get(dev, "sclk_vpll"); |
| if (IS_ERR_OR_NULL(sclk_vpll)) { |
| dev_err(dev, "failed to get clock 'sclk_vpll'\n"); |
| ret = -ENXIO; |
| goto fail_dacphy; |
| } |
| clk_set_parent(sdev->sclk_dac, sclk_vpll); |
| clk_put(sclk_vpll); |
| sdev->fout_vpll = clk_get(dev, "fout_vpll"); |
| if (IS_ERR_OR_NULL(sdev->fout_vpll)) { |
| dev_err(dev, "failed to get clock 'fout_vpll'\n"); |
| goto fail_dacphy; |
| } |
| dev_info(dev, "fout_vpll.rate = %lu\n", clk_get_rate(sclk_vpll)); |
| |
| /* acquire regulator */ |
| sdev->vdac = regulator_get(dev, "vdd33a_dac"); |
| if (IS_ERR_OR_NULL(sdev->vdac)) { |
| dev_err(dev, "failed to get regulator 'vdac'\n"); |
| goto fail_fout_vpll; |
| } |
| sdev->vdet = regulator_get(dev, "vdet"); |
| if (IS_ERR_OR_NULL(sdev->vdet)) { |
| dev_err(dev, "failed to get regulator 'vdet'\n"); |
| goto fail_vdac; |
| } |
| |
| /* enable gate for dac clock, because mixer uses it */ |
| clk_enable(sdev->dac); |
| |
| /* configure power management */ |
| pm_runtime_enable(dev); |
| |
| /* configuration of interface subdevice */ |
| v4l2_subdev_init(&sdev->sd, &sdo_sd_ops); |
| sdev->sd.owner = THIS_MODULE; |
| strlcpy(sdev->sd.name, "s5p-sdo", sizeof sdev->sd.name); |
| |
| /* set default format */ |
| sdev->fmt = sdo_find_format(SDO_DEFAULT_STD); |
| BUG_ON(sdev->fmt == NULL); |
| |
| /* keeping subdev in device's private for use by other drivers */ |
| dev_set_drvdata(dev, &sdev->sd); |
| |
| dev_info(dev, "probe succeeded\n"); |
| return 0; |
| |
| fail_vdac: |
| regulator_put(sdev->vdac); |
| fail_fout_vpll: |
| clk_put(sdev->fout_vpll); |
| fail_dacphy: |
| clk_put(sdev->dacphy); |
| fail_dac: |
| clk_put(sdev->dac); |
| fail_sclk_dac: |
| clk_put(sdev->sclk_dac); |
| fail_irq: |
| free_irq(sdev->irq, sdev); |
| fail_regs: |
| iounmap(sdev->regs); |
| fail_sdev: |
| kfree(sdev); |
| fail: |
| dev_info(dev, "probe failed\n"); |
| return ret; |
| } |
| |
| static int __devexit sdo_remove(struct platform_device *pdev) |
| { |
| struct v4l2_subdev *sd = dev_get_drvdata(&pdev->dev); |
| struct sdo_device *sdev = sd_to_sdev(sd); |
| |
| pm_runtime_disable(&pdev->dev); |
| clk_disable(sdev->dac); |
| regulator_put(sdev->vdet); |
| regulator_put(sdev->vdac); |
| clk_put(sdev->fout_vpll); |
| clk_put(sdev->dacphy); |
| clk_put(sdev->dac); |
| clk_put(sdev->sclk_dac); |
| free_irq(sdev->irq, sdev); |
| iounmap(sdev->regs); |
| kfree(sdev); |
| |
| dev_info(&pdev->dev, "remove successful\n"); |
| return 0; |
| } |
| |
| static struct platform_driver sdo_driver __refdata = { |
| .probe = sdo_probe, |
| .remove = __devexit_p(sdo_remove), |
| .driver = { |
| .name = "s5p-sdo", |
| .owner = THIS_MODULE, |
| .pm = &sdo_pm_ops, |
| } |
| }; |
| |
| static int __init sdo_init(void) |
| { |
| int ret; |
| static const char banner[] __initdata = KERN_INFO \ |
| "Samsung Standard Definition Output (SDO) driver, " |
| "(c) 2010-2011 Samsung Electronics Co., Ltd.\n"; |
| printk(banner); |
| |
| ret = platform_driver_register(&sdo_driver); |
| if (ret) |
| printk(KERN_ERR "SDO platform driver register failed\n"); |
| |
| return ret; |
| } |
| module_init(sdo_init); |
| |
| static void __exit sdo_exit(void) |
| { |
| platform_driver_unregister(&sdo_driver); |
| } |
| module_exit(sdo_exit); |