| // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| // |
| // Device Tree Include file for Layerscape-LX2160A family SoC. |
| // |
| // Copyright 2018-2020 NXP |
| |
| #include <dt-bindings/clock/fsl,qoriq-clockgen.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/thermal/thermal.h> |
| |
| /memreserve/ 0x80000000 0x00010000; |
| |
| / { |
| compatible = "fsl,lx2160a"; |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| aliases { |
| rtc1 = &ftm_alarm0; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| // 8 clusters having 2 Cortex-A72 cores each |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72"; |
| enable-method = "psci"; |
| reg = <0x0>; |
| clocks = <&clockgen QORIQ_CLK_CMUX 0>; |
| d-cache-size = <0x8000>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| i-cache-size = <0xC000>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <192>; |
| next-level-cache = <&cluster0_l2>; |
| cpu-idle-states = <&cpu_pw15>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72"; |
| enable-method = "psci"; |
| reg = <0x1>; |
| clocks = <&clockgen QORIQ_CLK_CMUX 0>; |
| d-cache-size = <0x8000>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| i-cache-size = <0xC000>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <192>; |
| next-level-cache = <&cluster0_l2>; |
| cpu-idle-states = <&cpu_pw15>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu100: cpu@100 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72"; |
| enable-method = "psci"; |
| reg = <0x100>; |
| clocks = <&clockgen QORIQ_CLK_CMUX 1>; |
| d-cache-size = <0x8000>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| i-cache-size = <0xC000>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <192>; |
| next-level-cache = <&cluster1_l2>; |
| cpu-idle-states = <&cpu_pw15>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu101: cpu@101 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72"; |
| enable-method = "psci"; |
| reg = <0x101>; |
| clocks = <&clockgen QORIQ_CLK_CMUX 1>; |
| d-cache-size = <0x8000>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| i-cache-size = <0xC000>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <192>; |
| next-level-cache = <&cluster1_l2>; |
| cpu-idle-states = <&cpu_pw15>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu200: cpu@200 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72"; |
| enable-method = "psci"; |
| reg = <0x200>; |
| clocks = <&clockgen QORIQ_CLK_CMUX 2>; |
| d-cache-size = <0x8000>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| i-cache-size = <0xC000>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <192>; |
| next-level-cache = <&cluster2_l2>; |
| cpu-idle-states = <&cpu_pw15>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu201: cpu@201 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72"; |
| enable-method = "psci"; |
| reg = <0x201>; |
| clocks = <&clockgen QORIQ_CLK_CMUX 2>; |
| d-cache-size = <0x8000>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| i-cache-size = <0xC000>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <192>; |
| next-level-cache = <&cluster2_l2>; |
| cpu-idle-states = <&cpu_pw15>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu300: cpu@300 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72"; |
| enable-method = "psci"; |
| reg = <0x300>; |
| clocks = <&clockgen QORIQ_CLK_CMUX 3>; |
| d-cache-size = <0x8000>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| i-cache-size = <0xC000>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <192>; |
| next-level-cache = <&cluster3_l2>; |
| cpu-idle-states = <&cpu_pw15>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu301: cpu@301 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72"; |
| enable-method = "psci"; |
| reg = <0x301>; |
| clocks = <&clockgen QORIQ_CLK_CMUX 3>; |
| d-cache-size = <0x8000>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| i-cache-size = <0xC000>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <192>; |
| next-level-cache = <&cluster3_l2>; |
| cpu-idle-states = <&cpu_pw15>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu400: cpu@400 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72"; |
| enable-method = "psci"; |
| reg = <0x400>; |
| clocks = <&clockgen QORIQ_CLK_CMUX 4>; |
| d-cache-size = <0x8000>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| i-cache-size = <0xC000>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <192>; |
| next-level-cache = <&cluster4_l2>; |
| cpu-idle-states = <&cpu_pw15>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu401: cpu@401 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72"; |
| enable-method = "psci"; |
| reg = <0x401>; |
| clocks = <&clockgen QORIQ_CLK_CMUX 4>; |
| d-cache-size = <0x8000>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| i-cache-size = <0xC000>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <192>; |
| next-level-cache = <&cluster4_l2>; |
| cpu-idle-states = <&cpu_pw15>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu500: cpu@500 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72"; |
| enable-method = "psci"; |
| reg = <0x500>; |
| clocks = <&clockgen QORIQ_CLK_CMUX 5>; |
| d-cache-size = <0x8000>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| i-cache-size = <0xC000>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <192>; |
| next-level-cache = <&cluster5_l2>; |
| cpu-idle-states = <&cpu_pw15>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu501: cpu@501 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72"; |
| enable-method = "psci"; |
| reg = <0x501>; |
| clocks = <&clockgen QORIQ_CLK_CMUX 5>; |
| d-cache-size = <0x8000>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| i-cache-size = <0xC000>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <192>; |
| next-level-cache = <&cluster5_l2>; |
| cpu-idle-states = <&cpu_pw15>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu600: cpu@600 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72"; |
| enable-method = "psci"; |
| reg = <0x600>; |
| clocks = <&clockgen QORIQ_CLK_CMUX 6>; |
| d-cache-size = <0x8000>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| i-cache-size = <0xC000>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <192>; |
| next-level-cache = <&cluster6_l2>; |
| cpu-idle-states = <&cpu_pw15>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu601: cpu@601 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72"; |
| enable-method = "psci"; |
| reg = <0x601>; |
| clocks = <&clockgen QORIQ_CLK_CMUX 6>; |
| d-cache-size = <0x8000>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| i-cache-size = <0xC000>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <192>; |
| next-level-cache = <&cluster6_l2>; |
| cpu-idle-states = <&cpu_pw15>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu700: cpu@700 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72"; |
| enable-method = "psci"; |
| reg = <0x700>; |
| clocks = <&clockgen QORIQ_CLK_CMUX 7>; |
| d-cache-size = <0x8000>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| i-cache-size = <0xC000>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <192>; |
| next-level-cache = <&cluster7_l2>; |
| cpu-idle-states = <&cpu_pw15>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu701: cpu@701 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72"; |
| enable-method = "psci"; |
| reg = <0x701>; |
| clocks = <&clockgen QORIQ_CLK_CMUX 7>; |
| d-cache-size = <0x8000>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <128>; |
| i-cache-size = <0xC000>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <192>; |
| next-level-cache = <&cluster7_l2>; |
| cpu-idle-states = <&cpu_pw15>; |
| #cooling-cells = <2>; |
| }; |
| |
| cluster0_l2: l2-cache0 { |
| compatible = "cache"; |
| cache-unified; |
| cache-size = <0x100000>; |
| cache-line-size = <64>; |
| cache-sets = <1024>; |
| cache-level = <2>; |
| }; |
| |
| cluster1_l2: l2-cache1 { |
| compatible = "cache"; |
| cache-unified; |
| cache-size = <0x100000>; |
| cache-line-size = <64>; |
| cache-sets = <1024>; |
| cache-level = <2>; |
| }; |
| |
| cluster2_l2: l2-cache2 { |
| compatible = "cache"; |
| cache-unified; |
| cache-size = <0x100000>; |
| cache-line-size = <64>; |
| cache-sets = <1024>; |
| cache-level = <2>; |
| }; |
| |
| cluster3_l2: l2-cache3 { |
| compatible = "cache"; |
| cache-unified; |
| cache-size = <0x100000>; |
| cache-line-size = <64>; |
| cache-sets = <1024>; |
| cache-level = <2>; |
| }; |
| |
| cluster4_l2: l2-cache4 { |
| compatible = "cache"; |
| cache-unified; |
| cache-size = <0x100000>; |
| cache-line-size = <64>; |
| cache-sets = <1024>; |
| cache-level = <2>; |
| }; |
| |
| cluster5_l2: l2-cache5 { |
| compatible = "cache"; |
| cache-unified; |
| cache-size = <0x100000>; |
| cache-line-size = <64>; |
| cache-sets = <1024>; |
| cache-level = <2>; |
| }; |
| |
| cluster6_l2: l2-cache6 { |
| compatible = "cache"; |
| cache-unified; |
| cache-size = <0x100000>; |
| cache-line-size = <64>; |
| cache-sets = <1024>; |
| cache-level = <2>; |
| }; |
| |
| cluster7_l2: l2-cache7 { |
| compatible = "cache"; |
| cache-unified; |
| cache-size = <0x100000>; |
| cache-line-size = <64>; |
| cache-sets = <1024>; |
| cache-level = <2>; |
| }; |
| |
| cpu_pw15: cpu-pw15 { |
| compatible = "arm,idle-state"; |
| idle-state-name = "PW15"; |
| arm,psci-suspend-param = <0x0>; |
| entry-latency-us = <2000>; |
| exit-latency-us = <2000>; |
| min-residency-us = <6000>; |
| }; |
| }; |
| |
| gic: interrupt-controller@6000000 { |
| compatible = "arm,gic-v3"; |
| reg = <0x0 0x06000000 0 0x10000>, // GIC Dist |
| <0x0 0x06200000 0 0x200000>, // GICR (RD_base + |
| // SGI_base) |
| <0x0 0x0c0c0000 0 0x2000>, // GICC |
| <0x0 0x0c0d0000 0 0x1000>, // GICH |
| <0x0 0x0c0e0000 0 0x20000>; // GICV |
| #interrupt-cells = <3>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| interrupt-controller; |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| |
| its: msi-controller@6020000 { |
| compatible = "arm,gic-v3-its"; |
| msi-controller; |
| reg = <0x0 0x6020000 0 0x20000>; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a72-pmu"; |
| interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-0.2"; |
| method = "smc"; |
| }; |
| |
| memory@80000000 { |
| // DRAM space - 1, size : 2 GB DRAM |
| device_type = "memory"; |
| reg = <0x00000000 0x80000000 0 0x80000000>; |
| }; |
| |
| ddr1: memory-controller@1080000 { |
| compatible = "fsl,qoriq-memory-controller"; |
| reg = <0x0 0x1080000 0x0 0x1000>; |
| interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; |
| little-endian; |
| }; |
| |
| ddr2: memory-controller@1090000 { |
| compatible = "fsl,qoriq-memory-controller"; |
| reg = <0x0 0x1090000 0x0 0x1000>; |
| interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; |
| little-endian; |
| }; |
| |
| // One clock unit-sysclk node which bootloader require during DT fix-up |
| sysclk: sysclk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <100000000>; // fixed up by bootloader |
| clock-output-names = "sysclk"; |
| }; |
| |
| thermal-zones { |
| cluster6-7 { |
| polling-delay-passive = <1000>; |
| polling-delay = <5000>; |
| thermal-sensors = <&tmu 0>; |
| |
| trips { |
| cluster6_7_alert: cluster6-7-alert { |
| temperature = <85000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cluster6_7_crit: cluster6-7-crit { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cluster6_7_alert>; |
| cooling-device = |
| <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu200 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu201 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu300 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu301 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu400 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu401 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu500 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu501 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu600 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu601 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu700 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu701 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| ddr-cluster5 { |
| polling-delay-passive = <1000>; |
| polling-delay = <5000>; |
| thermal-sensors = <&tmu 1>; |
| |
| trips { |
| ddr-cluster5-alert { |
| temperature = <85000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| ddr-cluster5-crit { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| wriop { |
| polling-delay-passive = <1000>; |
| polling-delay = <5000>; |
| thermal-sensors = <&tmu 2>; |
| |
| trips { |
| wriop-alert { |
| temperature = <85000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| wriop-crit { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| dce-qbman-hsio2 { |
| polling-delay-passive = <1000>; |
| polling-delay = <5000>; |
| thermal-sensors = <&tmu 3>; |
| |
| trips { |
| dce-qbman-alert { |
| temperature = <85000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| dce-qbman-crit { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| ccn-dpaa-tbu { |
| polling-delay-passive = <1000>; |
| polling-delay = <5000>; |
| thermal-sensors = <&tmu 4>; |
| |
| trips { |
| ccn-dpaa-alert { |
| temperature = <85000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| ccn-dpaa-crit { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cluster4-hsio3 { |
| polling-delay-passive = <1000>; |
| polling-delay = <5000>; |
| thermal-sensors = <&tmu 5>; |
| |
| trips { |
| clust4-hsio3-alert { |
| temperature = <85000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| clust4-hsio3-crit { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cluster2-3 { |
| polling-delay-passive = <1000>; |
| polling-delay = <5000>; |
| thermal-sensors = <&tmu 6>; |
| |
| trips { |
| cluster2-3-alert { |
| temperature = <85000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cluster2-3-crit { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; |
| |
| serdes_1: phy@1ea0000 { |
| compatible = "fsl,lynx-28g"; |
| reg = <0x0 0x1ea0000 0x0 0x1e30>; |
| #phy-cells = <1>; |
| }; |
| |
| serdes_2: phy@1eb0000 { |
| compatible = "fsl,lynx-28g"; |
| reg = <0x0 0x1eb0000 0x0 0x1e30>; |
| #phy-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| crypto: crypto@8000000 { |
| compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; |
| fsl,sec-era = <10>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x00 0x8000000 0x100000>; |
| reg = <0x00 0x8000000 0x0 0x100000>; |
| interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; |
| dma-coherent; |
| status = "disabled"; |
| |
| sec_jr0: jr@10000 { |
| compatible = "fsl,sec-v5.0-job-ring", |
| "fsl,sec-v4.0-job-ring"; |
| reg = <0x10000 0x10000>; |
| interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| sec_jr1: jr@20000 { |
| compatible = "fsl,sec-v5.0-job-ring", |
| "fsl,sec-v4.0-job-ring"; |
| reg = <0x20000 0x10000>; |
| interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| sec_jr2: jr@30000 { |
| compatible = "fsl,sec-v5.0-job-ring", |
| "fsl,sec-v4.0-job-ring"; |
| reg = <0x30000 0x10000>; |
| interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| sec_jr3: jr@40000 { |
| compatible = "fsl,sec-v5.0-job-ring", |
| "fsl,sec-v4.0-job-ring"; |
| reg = <0x40000 0x10000>; |
| interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| clockgen: clock-controller@1300000 { |
| compatible = "fsl,lx2160a-clockgen"; |
| reg = <0 0x1300000 0 0xa0000>; |
| #clock-cells = <2>; |
| clocks = <&sysclk>; |
| }; |
| |
| dcfg: syscon@1e00000 { |
| compatible = "fsl,lx2160a-dcfg", "syscon"; |
| reg = <0x0 0x1e00000 0x0 0x10000>; |
| little-endian; |
| }; |
| |
| sfp: efuse@1e80000 { |
| compatible = "fsl,ls1028a-sfp"; |
| reg = <0x0 0x1e80000 0x0 0x10000>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(4)>; |
| clock-names = "sfp"; |
| }; |
| |
| isc: syscon@1f70000 { |
| compatible = "fsl,lx2160a-isc", "syscon"; |
| reg = <0x0 0x1f70000 0x0 0x10000>; |
| little-endian; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x1f70000 0x10000>; |
| |
| extirq: interrupt-controller@14 { |
| compatible = "fsl,lx2160a-extirq", "fsl,ls1088a-extirq"; |
| #interrupt-cells = <2>; |
| #address-cells = <0>; |
| interrupt-controller; |
| reg = <0x14 4>; |
| interrupt-map = |
| <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, |
| <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, |
| <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, |
| <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, |
| <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, |
| <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, |
| <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, |
| <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, |
| <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, |
| <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-map-mask = <0xf 0x0>; |
| }; |
| }; |
| |
| tmu: tmu@1f80000 { |
| compatible = "fsl,qoriq-tmu"; |
| reg = <0x0 0x1f80000 0x0 0x10000>; |
| interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
| fsl,tmu-range = <0x800000e6 0x8001017d>; |
| fsl,tmu-calibration = |
| /* Calibration data group 1 */ |
| <0x00000000 0x00000035>, |
| /* Calibration data group 2 */ |
| <0x00000001 0x00000154>; |
| little-endian; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| i2c0: i2c@2000000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2000000 0x0 0x10000>; |
| interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "i2c"; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(16)>; |
| scl-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@2010000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2010000 0x0 0x10000>; |
| interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "i2c"; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(16)>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@2020000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2020000 0x0 0x10000>; |
| interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "i2c"; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(16)>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@2030000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2030000 0x0 0x10000>; |
| interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "i2c"; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(16)>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@2040000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2040000 0x0 0x10000>; |
| interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "i2c"; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(16)>; |
| scl-gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>; |
| status = "disabled"; |
| }; |
| |
| i2c5: i2c@2050000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2050000 0x0 0x10000>; |
| interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "i2c"; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(16)>; |
| status = "disabled"; |
| }; |
| |
| i2c6: i2c@2060000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2060000 0x0 0x10000>; |
| interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "i2c"; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(16)>; |
| status = "disabled"; |
| }; |
| |
| i2c7: i2c@2070000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2070000 0x0 0x10000>; |
| interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "i2c"; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(16)>; |
| status = "disabled"; |
| }; |
| |
| fspi: spi@20c0000 { |
| compatible = "nxp,lx2160a-fspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x20c0000 0x0 0x10000>, |
| <0x0 0x20000000 0x0 0x10000000>; |
| reg-names = "fspi_base", "fspi_mmap"; |
| interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(4)>, |
| <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(4)>; |
| clock-names = "fspi_en", "fspi"; |
| status = "disabled"; |
| }; |
| |
| dspi0: spi@2100000 { |
| compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2100000 0x0 0x10000>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(8)>; |
| clock-names = "dspi"; |
| spi-num-chipselects = <5>; |
| bus-num = <0>; |
| status = "disabled"; |
| }; |
| |
| dspi1: spi@2110000 { |
| compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2110000 0x0 0x10000>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(8)>; |
| clock-names = "dspi"; |
| spi-num-chipselects = <5>; |
| bus-num = <1>; |
| status = "disabled"; |
| }; |
| |
| dspi2: spi@2120000 { |
| compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2120000 0x0 0x10000>; |
| interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(8)>; |
| clock-names = "dspi"; |
| spi-num-chipselects = <5>; |
| bus-num = <2>; |
| status = "disabled"; |
| }; |
| |
| esdhc0: esdhc@2140000 { |
| compatible = "fsl,esdhc"; |
| reg = <0x0 0x2140000 0x0 0x10000>; |
| interrupts = <0 28 0x4>; /* Level high type */ |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(2)>; |
| dma-coherent; |
| voltage-ranges = <1800 1800 3300 3300>; |
| sdhci,auto-cmd12; |
| little-endian; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| esdhc1: esdhc@2150000 { |
| compatible = "fsl,esdhc"; |
| reg = <0x0 0x2150000 0x0 0x10000>; |
| interrupts = <0 63 0x4>; /* Level high type */ |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(2)>; |
| dma-coherent; |
| voltage-ranges = <1800 1800 3300 3300>; |
| sdhci,auto-cmd12; |
| broken-cd; |
| little-endian; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| can0: can@2180000 { |
| compatible = "fsl,lx2160ar1-flexcan"; |
| reg = <0x0 0x2180000 0x0 0x10000>; |
| interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(8)>, |
| <&clockgen QORIQ_CLK_SYSCLK 0>; |
| clock-names = "ipg", "per"; |
| fsl,clk-source = /bits/ 8 <0>; |
| status = "disabled"; |
| }; |
| |
| can1: can@2190000 { |
| compatible = "fsl,lx2160ar1-flexcan"; |
| reg = <0x0 0x2190000 0x0 0x10000>; |
| interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(8)>, |
| <&clockgen QORIQ_CLK_SYSCLK 0>; |
| clock-names = "ipg", "per"; |
| fsl,clk-source = /bits/ 8 <0>; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@21c0000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(8)>, |
| <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(8)>; |
| clock-names = "uartclk", "apb_pclk"; |
| reg = <0x0 0x21c0000 0x0 0x1000>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@21d0000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(8)>, |
| <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(8)>; |
| clock-names = "uartclk", "apb_pclk"; |
| reg = <0x0 0x21d0000 0x0 0x1000>; |
| interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@21e0000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(8)>, |
| <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(8)>; |
| clock-names = "uartclk", "apb_pclk"; |
| reg = <0x0 0x21e0000 0x0 0x1000>; |
| interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@21f0000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(8)>, |
| <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(8)>; |
| clock-names = "uartclk", "apb_pclk"; |
| reg = <0x0 0x21f0000 0x0 0x1000>; |
| interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| gpio0: gpio@2300000 { |
| compatible = "fsl,qoriq-gpio"; |
| reg = <0x0 0x2300000 0x0 0x10000>; |
| interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| little-endian; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio1: gpio@2310000 { |
| compatible = "fsl,qoriq-gpio"; |
| reg = <0x0 0x2310000 0x0 0x10000>; |
| interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| little-endian; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio2: gpio@2320000 { |
| compatible = "fsl,qoriq-gpio"; |
| reg = <0x0 0x2320000 0x0 0x10000>; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| little-endian; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio3: gpio@2330000 { |
| compatible = "fsl,qoriq-gpio"; |
| reg = <0x0 0x2330000 0x0 0x10000>; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| little-endian; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| watchdog@23a0000 { |
| compatible = "arm,sbsa-gwdt"; |
| reg = <0x0 0x23a0000 0 0x1000>, |
| <0x0 0x2390000 0 0x1000>; |
| interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; |
| timeout-sec = <30>; |
| }; |
| |
| rcpm: power-controller@1e34040 { |
| compatible = "fsl,lx2160a-rcpm", "fsl,qoriq-rcpm-2.1+"; |
| reg = <0x0 0x1e34040 0x0 0x1c>; |
| #fsl,rcpm-wakeup-cells = <7>; |
| little-endian; |
| }; |
| |
| ftm_alarm0: timer@2800000 { |
| compatible = "fsl,lx2160a-ftm-alarm"; |
| reg = <0x0 0x2800000 0x0 0x10000>; |
| fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>; |
| interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| usb0: usb@3100000 { |
| compatible = "snps,dwc3"; |
| reg = <0x0 0x3100000 0x0 0x10000>; |
| interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; |
| dr_mode = "host"; |
| snps,quirk-frame-length-adjustment = <0x20>; |
| usb3-lpm-capable; |
| snps,dis_rxdet_inp3_quirk; |
| snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; |
| status = "disabled"; |
| }; |
| |
| usb1: usb@3110000 { |
| compatible = "snps,dwc3"; |
| reg = <0x0 0x3110000 0x0 0x10000>; |
| interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| dr_mode = "host"; |
| snps,quirk-frame-length-adjustment = <0x20>; |
| usb3-lpm-capable; |
| snps,dis_rxdet_inp3_quirk; |
| snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; |
| status = "disabled"; |
| }; |
| |
| sata0: sata@3200000 { |
| compatible = "fsl,lx2160a-ahci"; |
| reg = <0x0 0x3200000 0x0 0x10000>, |
| <0x7 0x100520 0x0 0x4>; |
| reg-names = "ahci", "sata-ecc"; |
| interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(4)>; |
| dma-coherent; |
| status = "disabled"; |
| }; |
| |
| sata1: sata@3210000 { |
| compatible = "fsl,lx2160a-ahci"; |
| reg = <0x0 0x3210000 0x0 0x10000>, |
| <0x7 0x100520 0x0 0x4>; |
| reg-names = "ahci", "sata-ecc"; |
| interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(4)>; |
| dma-coherent; |
| status = "disabled"; |
| }; |
| |
| sata2: sata@3220000 { |
| compatible = "fsl,lx2160a-ahci"; |
| reg = <0x0 0x3220000 0x0 0x10000>, |
| <0x7 0x100520 0x0 0x4>; |
| reg-names = "ahci", "sata-ecc"; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(4)>; |
| dma-coherent; |
| status = "disabled"; |
| }; |
| |
| sata3: sata@3230000 { |
| compatible = "fsl,lx2160a-ahci"; |
| reg = <0x0 0x3230000 0x0 0x10000>, |
| <0x7 0x100520 0x0 0x4>; |
| reg-names = "ahci", "sata-ecc"; |
| interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(4)>; |
| dma-coherent; |
| status = "disabled"; |
| }; |
| |
| pcie1: pcie@3400000 { |
| compatible = "fsl,lx2160a-pcie"; |
| reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ |
| <0x80 0x00000000 0x0 0x00002000>; /* configuration space */ |
| reg-names = "csr_axi_slave", "config_axi_slave"; |
| interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ |
| <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ |
| <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ |
| interrupt-names = "aer", "pme", "intr"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| dma-coherent; |
| apio-wins = <8>; |
| ppio-wins = <8>; |
| bus-range = <0x0 0xff>; |
| ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| msi-parent = <&its>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; |
| iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ |
| status = "disabled"; |
| }; |
| |
| pcie2: pcie@3500000 { |
| compatible = "fsl,lx2160a-pcie"; |
| reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ |
| <0x88 0x00000000 0x0 0x00002000>; /* configuration space */ |
| reg-names = "csr_axi_slave", "config_axi_slave"; |
| interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ |
| <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ |
| <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ |
| interrupt-names = "aer", "pme", "intr"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| dma-coherent; |
| apio-wins = <8>; |
| ppio-wins = <8>; |
| bus-range = <0x0 0xff>; |
| ranges = <0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| msi-parent = <&its>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; |
| iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ |
| status = "disabled"; |
| }; |
| |
| pcie3: pcie@3600000 { |
| compatible = "fsl,lx2160a-pcie"; |
| reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */ |
| <0x90 0x00000000 0x0 0x00002000>; /* configuration space */ |
| reg-names = "csr_axi_slave", "config_axi_slave"; |
| interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ |
| <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ |
| <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ |
| interrupt-names = "aer", "pme", "intr"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| dma-coherent; |
| apio-wins = <256>; |
| ppio-wins = <24>; |
| bus-range = <0x0 0xff>; |
| ranges = <0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| msi-parent = <&its>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 2 &gic 0 0 GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 3 &gic 0 0 GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 4 &gic 0 0 GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; |
| iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ |
| status = "disabled"; |
| }; |
| |
| pcie4: pcie@3700000 { |
| compatible = "fsl,lx2160a-pcie"; |
| reg = <0x00 0x03700000 0x0 0x00100000>, /* controller registers */ |
| <0x98 0x00000000 0x0 0x00002000>; /* configuration space */ |
| reg-names = "csr_axi_slave", "config_axi_slave"; |
| interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ |
| <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ |
| <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ |
| interrupt-names = "aer", "pme", "intr"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| dma-coherent; |
| apio-wins = <8>; |
| ppio-wins = <8>; |
| bus-range = <0x0 0xff>; |
| ranges = <0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| msi-parent = <&its>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 2 &gic 0 0 GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 3 &gic 0 0 GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 4 &gic 0 0 GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; |
| iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ |
| status = "disabled"; |
| }; |
| |
| pcie5: pcie@3800000 { |
| compatible = "fsl,lx2160a-pcie"; |
| reg = <0x00 0x03800000 0x0 0x00100000>, /* controller registers */ |
| <0xa0 0x00000000 0x0 0x00002000>; /* configuration space */ |
| reg-names = "csr_axi_slave", "config_axi_slave"; |
| interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ |
| <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ |
| <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ |
| interrupt-names = "aer", "pme", "intr"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| dma-coherent; |
| apio-wins = <256>; |
| ppio-wins = <24>; |
| bus-range = <0x0 0xff>; |
| ranges = <0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| msi-parent = <&its>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 2 &gic 0 0 GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 3 &gic 0 0 GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 4 &gic 0 0 GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; |
| iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ |
| status = "disabled"; |
| }; |
| |
| pcie6: pcie@3900000 { |
| compatible = "fsl,lx2160a-pcie"; |
| reg = <0x00 0x03900000 0x0 0x00100000>, /* controller registers */ |
| <0xa8 0x00000000 0x0 0x00002000>; /* configuration space */ |
| reg-names = "csr_axi_slave", "config_axi_slave"; |
| interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ |
| <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ |
| <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ |
| interrupt-names = "aer", "pme", "intr"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| dma-coherent; |
| apio-wins = <8>; |
| ppio-wins = <8>; |
| bus-range = <0x0 0xff>; |
| ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| msi-parent = <&its>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 2 &gic 0 0 GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 3 &gic 0 0 GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 4 &gic 0 0 GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; |
| iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ |
| status = "disabled"; |
| }; |
| |
| smmu: iommu@5000000 { |
| compatible = "arm,mmu-500"; |
| reg = <0 0x5000000 0 0x800000>; |
| #iommu-cells = <1>; |
| #global-interrupts = <14>; |
| // global secure fault |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, |
| // combined secure |
| <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, |
| // global non-secure fault |
| <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, |
| // combined non-secure |
| <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, |
| // performance counter interrupts 0-9 |
| <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, |
| // per context interrupt, 64 interrupts |
| <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; |
| dma-coherent; |
| }; |
| |
| console@8340020 { |
| compatible = "fsl,dpaa2-console"; |
| reg = <0x00000000 0x08340020 0 0x2>; |
| }; |
| |
| ptp-timer@8b95000 { |
| compatible = "fsl,dpaa2-ptp"; |
| reg = <0x0 0x8b95000 0x0 0x100>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(2)>; |
| little-endian; |
| fsl,extts-fifo; |
| }; |
| |
| /* WRIOP0: 0x8b8_0000, E-MDIO1: 0x1_6000 */ |
| emdio1: mdio@8b96000 { |
| compatible = "fsl,fman-memac-mdio"; |
| reg = <0x0 0x8b96000 0x0 0x1000>; |
| interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| little-endian; |
| clock-frequency = <2500000>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(2)>; |
| status = "disabled"; |
| }; |
| |
| emdio2: mdio@8b97000 { |
| compatible = "fsl,fman-memac-mdio"; |
| reg = <0x0 0x8b97000 0x0 0x1000>; |
| interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| little-endian; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-frequency = <2500000>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(2)>; |
| status = "disabled"; |
| }; |
| |
| pcs_mdio1: mdio@8c07000 { |
| compatible = "fsl,fman-memac-mdio"; |
| reg = <0x0 0x8c07000 0x0 0x1000>; |
| little-endian; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| pcs1: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| pcs_mdio2: mdio@8c0b000 { |
| compatible = "fsl,fman-memac-mdio"; |
| reg = <0x0 0x8c0b000 0x0 0x1000>; |
| little-endian; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| pcs2: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| pcs_mdio3: mdio@8c0f000 { |
| compatible = "fsl,fman-memac-mdio"; |
| reg = <0x0 0x8c0f000 0x0 0x1000>; |
| little-endian; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| pcs3: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| pcs_mdio4: mdio@8c13000 { |
| compatible = "fsl,fman-memac-mdio"; |
| reg = <0x0 0x8c13000 0x0 0x1000>; |
| little-endian; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| pcs4: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| pcs_mdio5: mdio@8c17000 { |
| compatible = "fsl,fman-memac-mdio"; |
| reg = <0x0 0x8c17000 0x0 0x1000>; |
| little-endian; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| pcs5: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| pcs_mdio6: mdio@8c1b000 { |
| compatible = "fsl,fman-memac-mdio"; |
| reg = <0x0 0x8c1b000 0x0 0x1000>; |
| little-endian; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| pcs6: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| pcs_mdio7: mdio@8c1f000 { |
| compatible = "fsl,fman-memac-mdio"; |
| reg = <0x0 0x8c1f000 0x0 0x1000>; |
| little-endian; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| pcs7: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| pcs_mdio8: mdio@8c23000 { |
| compatible = "fsl,fman-memac-mdio"; |
| reg = <0x0 0x8c23000 0x0 0x1000>; |
| little-endian; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| pcs8: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| pcs_mdio9: mdio@8c27000 { |
| compatible = "fsl,fman-memac-mdio"; |
| reg = <0x0 0x8c27000 0x0 0x1000>; |
| little-endian; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| pcs9: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| pcs_mdio10: mdio@8c2b000 { |
| compatible = "fsl,fman-memac-mdio"; |
| reg = <0x0 0x8c2b000 0x0 0x1000>; |
| little-endian; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| pcs10: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| pcs_mdio11: mdio@8c2f000 { |
| compatible = "fsl,fman-memac-mdio"; |
| reg = <0x0 0x8c2f000 0x0 0x1000>; |
| little-endian; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| pcs11: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| pcs_mdio12: mdio@8c33000 { |
| compatible = "fsl,fman-memac-mdio"; |
| reg = <0x0 0x8c33000 0x0 0x1000>; |
| little-endian; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| pcs12: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| pcs_mdio13: mdio@8c37000 { |
| compatible = "fsl,fman-memac-mdio"; |
| reg = <0x0 0x8c37000 0x0 0x1000>; |
| little-endian; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| pcs13: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| pcs_mdio14: mdio@8c3b000 { |
| compatible = "fsl,fman-memac-mdio"; |
| reg = <0x0 0x8c3b000 0x0 0x1000>; |
| little-endian; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| pcs14: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| pcs_mdio15: mdio@8c3f000 { |
| compatible = "fsl,fman-memac-mdio"; |
| reg = <0x0 0x8c3f000 0x0 0x1000>; |
| little-endian; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| pcs15: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| pcs_mdio16: mdio@8c43000 { |
| compatible = "fsl,fman-memac-mdio"; |
| reg = <0x0 0x8c43000 0x0 0x1000>; |
| little-endian; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| pcs16: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| pcs_mdio17: mdio@8c47000 { |
| compatible = "fsl,fman-memac-mdio"; |
| reg = <0x0 0x8c47000 0x0 0x1000>; |
| little-endian; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| pcs17: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| pcs_mdio18: mdio@8c4b000 { |
| compatible = "fsl,fman-memac-mdio"; |
| reg = <0x0 0x8c4b000 0x0 0x1000>; |
| little-endian; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| pcs18: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| fsl_mc: fsl-mc@80c000000 { |
| compatible = "fsl,qoriq-mc"; |
| reg = <0x00000008 0x0c000000 0 0x40>, |
| <0x00000000 0x08340000 0 0x40000>; |
| msi-parent = <&its>; |
| /* iommu-map property is fixed up by u-boot */ |
| iommu-map = <0 &smmu 0 0>; |
| dma-coherent; |
| #address-cells = <3>; |
| #size-cells = <1>; |
| |
| /* |
| * Region type 0x0 - MC portals |
| * Region type 0x1 - QBMAN portals |
| */ |
| ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 |
| 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; |
| |
| /* |
| * Define the maximum number of MACs present on the SoC. |
| */ |
| dpmacs { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| dpmac1: ethernet@1 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x1>; |
| pcs-handle = <&pcs1>; |
| }; |
| |
| dpmac2: ethernet@2 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x2>; |
| pcs-handle = <&pcs2>; |
| }; |
| |
| dpmac3: ethernet@3 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x3>; |
| pcs-handle = <&pcs3>; |
| }; |
| |
| dpmac4: ethernet@4 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x4>; |
| pcs-handle = <&pcs4>; |
| }; |
| |
| dpmac5: ethernet@5 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x5>; |
| pcs-handle = <&pcs5>; |
| }; |
| |
| dpmac6: ethernet@6 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x6>; |
| pcs-handle = <&pcs6>; |
| }; |
| |
| dpmac7: ethernet@7 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x7>; |
| pcs-handle = <&pcs7>; |
| }; |
| |
| dpmac8: ethernet@8 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x8>; |
| pcs-handle = <&pcs8>; |
| }; |
| |
| dpmac9: ethernet@9 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x9>; |
| pcs-handle = <&pcs9>; |
| }; |
| |
| dpmac10: ethernet@a { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0xa>; |
| pcs-handle = <&pcs10>; |
| }; |
| |
| dpmac11: ethernet@b { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0xb>; |
| pcs-handle = <&pcs11>; |
| }; |
| |
| dpmac12: ethernet@c { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0xc>; |
| pcs-handle = <&pcs12>; |
| }; |
| |
| dpmac13: ethernet@d { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0xd>; |
| pcs-handle = <&pcs13>; |
| }; |
| |
| dpmac14: ethernet@e { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0xe>; |
| pcs-handle = <&pcs14>; |
| }; |
| |
| dpmac15: ethernet@f { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0xf>; |
| pcs-handle = <&pcs15>; |
| }; |
| |
| dpmac16: ethernet@10 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x10>; |
| pcs-handle = <&pcs16>; |
| }; |
| |
| dpmac17: ethernet@11 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x11>; |
| pcs-handle = <&pcs17>; |
| }; |
| |
| dpmac18: ethernet@12 { |
| compatible = "fsl,qoriq-mc-dpmac"; |
| reg = <0x12>; |
| pcs-handle = <&pcs18>; |
| }; |
| }; |
| }; |
| }; |
| |
| firmware { |
| optee: optee { |
| compatible = "linaro,optee-tz"; |
| method = "smc"; |
| status = "disabled"; |
| }; |
| }; |
| }; |
