| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2019~2020, 2022 NXP |
| */ |
| |
| #include <dt-bindings/clock/imx8-clock.h> |
| #include <dt-bindings/dma/fsl-edma.h> |
| #include <dt-bindings/firmware/imx/rsrc.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/pinctrl/pads-imx8dxl.h> |
| #include <dt-bindings/thermal/thermal.h> |
| |
| / { |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| aliases { |
| ethernet0 = &fec1; |
| ethernet1 = &eqos; |
| gpio0 = &lsio_gpio0; |
| gpio1 = &lsio_gpio1; |
| gpio2 = &lsio_gpio2; |
| gpio3 = &lsio_gpio3; |
| gpio4 = &lsio_gpio4; |
| gpio5 = &lsio_gpio5; |
| gpio6 = &lsio_gpio6; |
| gpio7 = &lsio_gpio7; |
| mu1 = &lsio_mu1; |
| }; |
| |
| cpus: cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| /* We have 1 clusters with 2 Cortex-A35 cores */ |
| A35_0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a35"; |
| reg = <0x0 0x0>; |
| enable-method = "psci"; |
| next-level-cache = <&A35_L2>; |
| clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>; |
| #cooling-cells = <2>; |
| operating-points-v2 = <&a35_opp_table>; |
| }; |
| |
| A35_1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a35"; |
| reg = <0x0 0x1>; |
| enable-method = "psci"; |
| next-level-cache = <&A35_L2>; |
| clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>; |
| #cooling-cells = <2>; |
| operating-points-v2 = <&a35_opp_table>; |
| }; |
| |
| A35_L2: l2-cache0 { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| }; |
| }; |
| |
| a35_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| |
| opp-900000000 { |
| opp-hz = /bits/ 64 <900000000>; |
| opp-microvolt = <1000000>; |
| clock-latency-ns = <150000>; |
| }; |
| |
| opp-1200000000 { |
| opp-hz = /bits/ 64 <1200000000>; |
| opp-microvolt = <1100000>; |
| clock-latency-ns = <150000>; |
| opp-suspend; |
| }; |
| }; |
| |
| gic: interrupt-controller@51a00000 { |
| compatible = "arm,gic-v3"; |
| reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */ |
| <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */ |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| dsp_reserved: dsp@92400000 { |
| reg = <0 0x92400000 0 0x2000000>; |
| no-map; |
| }; |
| }; |
| |
| pmu { |
| compatible = "arm,armv8-pmuv3"; |
| interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0"; |
| method = "smc"; |
| }; |
| |
| system-controller { |
| compatible = "fsl,imx-scu"; |
| mbox-names = "tx0", |
| "rx0", |
| "gip3"; |
| mboxes = <&lsio_mu1 0 0 |
| &lsio_mu1 1 0 |
| &lsio_mu1 3 3>; |
| |
| pd: power-controller { |
| compatible = "fsl,imx8dl-scu-pd", "fsl,scu-pd"; |
| #power-domain-cells = <1>; |
| }; |
| |
| clk: clock-controller { |
| compatible = "fsl,imx8dxl-clk", "fsl,scu-clk"; |
| #clock-cells = <2>; |
| }; |
| |
| scu_gpio: gpio { |
| compatible = "fsl,imx8qxp-sc-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| iomuxc: pinctrl { |
| compatible = "fsl,imx8dxl-iomuxc"; |
| }; |
| |
| ocotp: ocotp { |
| compatible = "fsl,imx8qxp-scu-ocotp"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| fec_mac0: mac@2c4 { |
| reg = <0x2c4 6>; |
| }; |
| |
| fec_mac1: mac@2c6 { |
| reg = <0x2c6 6>; |
| }; |
| }; |
| |
| rtc: rtc { |
| compatible = "fsl,imx8qxp-sc-rtc"; |
| }; |
| |
| sc_pwrkey: keys { |
| compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; |
| linux,keycodes = <KEY_POWER>; |
| wakeup-source; |
| }; |
| |
| watchdog { |
| compatible = "fsl,imx8dxl-sc-wdt", "fsl,imx-sc-wdt"; |
| timeout-sec = <60>; |
| }; |
| |
| tsens: thermal-sensor { |
| compatible = "fsl,imx8dxl-sc-thermal", "fsl,imx-sc-thermal"; |
| #thermal-sensor-cells = <1>; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */ |
| <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */ |
| <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */ |
| <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */ |
| }; |
| |
| thermal_zones: thermal-zones { |
| cpu-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <2000>; |
| thermal-sensors = <&tsens IMX_SC_R_SYSTEM>; |
| |
| trips { |
| cpu_alert0: trip0 { |
| temperature = <107000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| cpu_crit0: trip1 { |
| temperature = <127000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu_alert0>; |
| cooling-device = |
| <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| }; |
| |
| /* The two values below cannot be changed by the board */ |
| xtal32k: clock-xtal32k { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| clock-output-names = "xtal_32KHz"; |
| }; |
| |
| xtal24m: clock-xtal24m { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <24000000>; |
| clock-output-names = "xtal_24MHz"; |
| }; |
| |
| /* sorted in register address */ |
| #include "imx8-ss-adma.dtsi" |
| #include "imx8-ss-conn.dtsi" |
| #include "imx8-ss-ddr.dtsi" |
| #include "imx8-ss-lsio.dtsi" |
| }; |
| |
| #include "imx8dxl-ss-adma.dtsi" |
| #include "imx8dxl-ss-conn.dtsi" |
| #include "imx8dxl-ss-lsio.dtsi" |
| #include "imx8dxl-ss-ddr.dtsi" |