| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright 2016 Maxime Ripard |
| * |
| * Maxime Ripard <maxime.ripard@free-electrons.com> |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| #include <linux/device.h> |
| #include <linux/iopoll.h> |
| #include <linux/slab.h> |
| |
| #include "ccu_common.h" |
| #include "ccu_gate.h" |
| #include "ccu_reset.h" |
| |
| struct sunxi_ccu { |
| const struct sunxi_ccu_desc *desc; |
| spinlock_t lock; |
| struct ccu_reset reset; |
| }; |
| |
| void ccu_helper_wait_for_lock(struct ccu_common *common, u32 lock) |
| { |
| void __iomem *addr; |
| u32 reg; |
| |
| if (!lock) |
| return; |
| |
| if (common->features & CCU_FEATURE_LOCK_REG) |
| addr = common->base + common->lock_reg; |
| else |
| addr = common->base + common->reg; |
| |
| WARN_ON(readl_relaxed_poll_timeout(addr, reg, reg & lock, 100, 70000)); |
| } |
| |
| /* |
| * This clock notifier is called when the frequency of a PLL clock is |
| * changed. In common PLL designs, changes to the dividers take effect |
| * almost immediately, while changes to the multipliers (implemented |
| * as dividers in the feedback loop) take a few cycles to work into |
| * the feedback loop for the PLL to stablize. |
| * |
| * Sometimes when the PLL clock rate is changed, the decrease in the |
| * divider is too much for the decrease in the multiplier to catch up. |
| * The PLL clock rate will spike, and in some cases, might lock up |
| * completely. |
| * |
| * This notifier callback will gate and then ungate the clock, |
| * effectively resetting it, so it proceeds to work. Care must be |
| * taken to reparent consumers to other temporary clocks during the |
| * rate change, and that this notifier callback must be the first |
| * to be registered. |
| */ |
| static int ccu_pll_notifier_cb(struct notifier_block *nb, |
| unsigned long event, void *data) |
| { |
| struct ccu_pll_nb *pll = to_ccu_pll_nb(nb); |
| int ret = 0; |
| |
| if (event != POST_RATE_CHANGE) |
| goto out; |
| |
| ccu_gate_helper_disable(pll->common, pll->enable); |
| |
| ret = ccu_gate_helper_enable(pll->common, pll->enable); |
| if (ret) |
| goto out; |
| |
| ccu_helper_wait_for_lock(pll->common, pll->lock); |
| |
| out: |
| return notifier_from_errno(ret); |
| } |
| |
| int ccu_pll_notifier_register(struct ccu_pll_nb *pll_nb) |
| { |
| pll_nb->clk_nb.notifier_call = ccu_pll_notifier_cb; |
| |
| return clk_notifier_register(pll_nb->common->hw.clk, |
| &pll_nb->clk_nb); |
| } |
| |
| static int sunxi_ccu_probe(struct sunxi_ccu *ccu, struct device *dev, |
| struct device_node *node, void __iomem *reg, |
| const struct sunxi_ccu_desc *desc) |
| { |
| struct ccu_reset *reset; |
| int i, ret; |
| |
| ccu->desc = desc; |
| |
| spin_lock_init(&ccu->lock); |
| |
| for (i = 0; i < desc->num_ccu_clks; i++) { |
| struct ccu_common *cclk = desc->ccu_clks[i]; |
| |
| if (!cclk) |
| continue; |
| |
| cclk->base = reg; |
| cclk->lock = &ccu->lock; |
| } |
| |
| for (i = 0; i < desc->hw_clks->num ; i++) { |
| struct clk_hw *hw = desc->hw_clks->hws[i]; |
| const char *name; |
| |
| if (!hw) |
| continue; |
| |
| name = hw->init->name; |
| if (dev) |
| ret = clk_hw_register(dev, hw); |
| else |
| ret = of_clk_hw_register(node, hw); |
| if (ret) { |
| pr_err("Couldn't register clock %d - %s\n", i, name); |
| goto err_clk_unreg; |
| } |
| } |
| |
| ret = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, |
| desc->hw_clks); |
| if (ret) |
| goto err_clk_unreg; |
| |
| reset = &ccu->reset; |
| reset->rcdev.of_node = node; |
| reset->rcdev.ops = &ccu_reset_ops; |
| reset->rcdev.owner = dev ? dev->driver->owner : THIS_MODULE; |
| reset->rcdev.nr_resets = desc->num_resets; |
| reset->base = reg; |
| reset->lock = &ccu->lock; |
| reset->reset_map = desc->resets; |
| |
| ret = reset_controller_register(&reset->rcdev); |
| if (ret) |
| goto err_del_provider; |
| |
| return 0; |
| |
| err_del_provider: |
| of_clk_del_provider(node); |
| err_clk_unreg: |
| while (--i >= 0) { |
| struct clk_hw *hw = desc->hw_clks->hws[i]; |
| |
| if (!hw) |
| continue; |
| clk_hw_unregister(hw); |
| } |
| return ret; |
| } |
| |
| static void devm_sunxi_ccu_release(struct device *dev, void *res) |
| { |
| struct sunxi_ccu *ccu = res; |
| const struct sunxi_ccu_desc *desc = ccu->desc; |
| int i; |
| |
| reset_controller_unregister(&ccu->reset.rcdev); |
| of_clk_del_provider(dev->of_node); |
| |
| for (i = 0; i < desc->hw_clks->num; i++) { |
| struct clk_hw *hw = desc->hw_clks->hws[i]; |
| |
| if (!hw) |
| continue; |
| clk_hw_unregister(hw); |
| } |
| } |
| |
| int devm_sunxi_ccu_probe(struct device *dev, void __iomem *reg, |
| const struct sunxi_ccu_desc *desc) |
| { |
| struct sunxi_ccu *ccu; |
| int ret; |
| |
| ccu = devres_alloc(devm_sunxi_ccu_release, sizeof(*ccu), GFP_KERNEL); |
| if (!ccu) |
| return -ENOMEM; |
| |
| ret = sunxi_ccu_probe(ccu, dev, dev->of_node, reg, desc); |
| if (ret) { |
| devres_free(ccu); |
| return ret; |
| } |
| |
| devres_add(dev, ccu); |
| |
| return 0; |
| } |
| |
| void of_sunxi_ccu_probe(struct device_node *node, void __iomem *reg, |
| const struct sunxi_ccu_desc *desc) |
| { |
| struct sunxi_ccu *ccu; |
| int ret; |
| |
| ccu = kzalloc(sizeof(*ccu), GFP_KERNEL); |
| if (!ccu) |
| return; |
| |
| ret = sunxi_ccu_probe(ccu, NULL, node, reg, desc); |
| if (ret) { |
| pr_err("%pOF: probing clocks failed: %d\n", node, ret); |
| kfree(ccu); |
| } |
| } |