| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Device Tree Source for AM6 SoC Family Wakeup Domain peripherals |
| * |
| * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ |
| */ |
| |
| &cbass_wakeup { |
| dmsc: dmsc { |
| compatible = "ti,am654-sci"; |
| ti,host-id = <12>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| mbox-names = "rx", "tx"; |
| |
| mboxes= <&secure_proxy_main 11>, |
| <&secure_proxy_main 13>; |
| |
| k3_pds: power-controller { |
| compatible = "ti,sci-pm-domain"; |
| #power-domain-cells = <2>; |
| }; |
| |
| k3_clks: clocks { |
| compatible = "ti,k2g-sci-clk"; |
| #clock-cells = <2>; |
| }; |
| |
| k3_reset: reset-controller { |
| compatible = "ti,sci-reset"; |
| #reset-cells = <2>; |
| }; |
| }; |
| |
| wkup_pmx0: pinmux@4301c000 { |
| compatible = "pinctrl-single"; |
| reg = <0x4301c000 0x118>; |
| #pinctrl-cells = <1>; |
| pinctrl-single,register-width = <32>; |
| pinctrl-single,function-mask = <0xffffffff>; |
| }; |
| |
| wkup_uart0: serial@42300000 { |
| compatible = "ti,am654-uart"; |
| reg = <0x42300000 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| current-speed = <115200>; |
| power-domains = <&k3_pds 150 TI_SCI_PD_EXCLUSIVE>; |
| }; |
| |
| wkup_i2c0: i2c@42120000 { |
| compatible = "ti,am654-i2c", "ti,omap4-i2c"; |
| reg = <0x42120000 0x100>; |
| interrupts = <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "fck"; |
| clocks = <&k3_clks 115 1>; |
| power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>; |
| }; |
| |
| intr_wkup_gpio: interrupt-controller2 { |
| compatible = "ti,sci-intr"; |
| ti,intr-trigger-type = <1>; |
| interrupt-controller; |
| interrupt-parent = <&gic500>; |
| #interrupt-cells = <2>; |
| ti,sci = <&dmsc>; |
| ti,sci-dst-id = <56>; |
| ti,sci-rm-range-girq = <0x4>; |
| }; |
| |
| wkup_gpio0: wkup_gpio0@42110000 { |
| compatible = "ti,am654-gpio", "ti,keystone-gpio"; |
| reg = <0x42110000 0x100>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&intr_wkup_gpio>; |
| interrupts = <59 128>, <59 129>, <59 130>, <59 131>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| ti,ngpio = <56>; |
| ti,davinci-gpio-unbanked = <0>; |
| clocks = <&k3_clks 59 0>; |
| clock-names = "gpio"; |
| }; |
| }; |
