| // SPDX-License-Identifier: GPL-2.0 |
| // |
| // soc-dai.c |
| // |
| // Copyright (C) 2019 Renesas Electronics Corp. |
| // Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
| // |
| |
| #include <sound/soc.h> |
| #include <sound/soc-dai.h> |
| |
| /** |
| * snd_soc_dai_set_sysclk - configure DAI system or master clock. |
| * @dai: DAI |
| * @clk_id: DAI specific clock ID |
| * @freq: new clock frequency in Hz |
| * @dir: new clock direction - input/output. |
| * |
| * Configures the DAI master (MCLK) or system (SYSCLK) clocking. |
| */ |
| int snd_soc_dai_set_sysclk(struct snd_soc_dai *dai, int clk_id, |
| unsigned int freq, int dir) |
| { |
| if (dai->driver->ops->set_sysclk) |
| return dai->driver->ops->set_sysclk(dai, clk_id, freq, dir); |
| |
| return snd_soc_component_set_sysclk(dai->component, clk_id, 0, |
| freq, dir); |
| } |
| EXPORT_SYMBOL_GPL(snd_soc_dai_set_sysclk); |
| |
| /** |
| * snd_soc_dai_set_clkdiv - configure DAI clock dividers. |
| * @dai: DAI |
| * @div_id: DAI specific clock divider ID |
| * @div: new clock divisor. |
| * |
| * Configures the clock dividers. This is used to derive the best DAI bit and |
| * frame clocks from the system or master clock. It's best to set the DAI bit |
| * and frame clocks as low as possible to save system power. |
| */ |
| int snd_soc_dai_set_clkdiv(struct snd_soc_dai *dai, |
| int div_id, int div) |
| { |
| if (dai->driver->ops->set_clkdiv) |
| return dai->driver->ops->set_clkdiv(dai, div_id, div); |
| else |
| return -EINVAL; |
| } |
| EXPORT_SYMBOL_GPL(snd_soc_dai_set_clkdiv); |
| |
| /** |
| * snd_soc_dai_set_pll - configure DAI PLL. |
| * @dai: DAI |
| * @pll_id: DAI specific PLL ID |
| * @source: DAI specific source for the PLL |
| * @freq_in: PLL input clock frequency in Hz |
| * @freq_out: requested PLL output clock frequency in Hz |
| * |
| * Configures and enables PLL to generate output clock based on input clock. |
| */ |
| int snd_soc_dai_set_pll(struct snd_soc_dai *dai, int pll_id, int source, |
| unsigned int freq_in, unsigned int freq_out) |
| { |
| if (dai->driver->ops->set_pll) |
| return dai->driver->ops->set_pll(dai, pll_id, source, |
| freq_in, freq_out); |
| |
| return snd_soc_component_set_pll(dai->component, pll_id, source, |
| freq_in, freq_out); |
| } |
| EXPORT_SYMBOL_GPL(snd_soc_dai_set_pll); |
| |
| /** |
| * snd_soc_dai_set_bclk_ratio - configure BCLK to sample rate ratio. |
| * @dai: DAI |
| * @ratio: Ratio of BCLK to Sample rate. |
| * |
| * Configures the DAI for a preset BCLK to sample rate ratio. |
| */ |
| int snd_soc_dai_set_bclk_ratio(struct snd_soc_dai *dai, unsigned int ratio) |
| { |
| if (dai->driver->ops->set_bclk_ratio) |
| return dai->driver->ops->set_bclk_ratio(dai, ratio); |
| else |
| return -EINVAL; |
| } |
| EXPORT_SYMBOL_GPL(snd_soc_dai_set_bclk_ratio); |
| |
| /** |
| * snd_soc_dai_set_fmt - configure DAI hardware audio format. |
| * @dai: DAI |
| * @fmt: SND_SOC_DAIFMT_* format value. |
| * |
| * Configures the DAI hardware format and clocking. |
| */ |
| int snd_soc_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) |
| { |
| if (dai->driver->ops->set_fmt == NULL) |
| return -ENOTSUPP; |
| return dai->driver->ops->set_fmt(dai, fmt); |
| } |
| EXPORT_SYMBOL_GPL(snd_soc_dai_set_fmt); |
| |
| /** |
| * snd_soc_xlate_tdm_slot - generate tx/rx slot mask. |
| * @slots: Number of slots in use. |
| * @tx_mask: bitmask representing active TX slots. |
| * @rx_mask: bitmask representing active RX slots. |
| * |
| * Generates the TDM tx and rx slot default masks for DAI. |
| */ |
| static int snd_soc_xlate_tdm_slot_mask(unsigned int slots, |
| unsigned int *tx_mask, |
| unsigned int *rx_mask) |
| { |
| if (*tx_mask || *rx_mask) |
| return 0; |
| |
| if (!slots) |
| return -EINVAL; |
| |
| *tx_mask = (1 << slots) - 1; |
| *rx_mask = (1 << slots) - 1; |
| |
| return 0; |
| } |
| |
| /** |
| * snd_soc_dai_set_tdm_slot() - Configures a DAI for TDM operation |
| * @dai: The DAI to configure |
| * @tx_mask: bitmask representing active TX slots. |
| * @rx_mask: bitmask representing active RX slots. |
| * @slots: Number of slots in use. |
| * @slot_width: Width in bits for each slot. |
| * |
| * This function configures the specified DAI for TDM operation. @slot contains |
| * the total number of slots of the TDM stream and @slot_with the width of each |
| * slot in bit clock cycles. @tx_mask and @rx_mask are bitmasks specifying the |
| * active slots of the TDM stream for the specified DAI, i.e. which slots the |
| * DAI should write to or read from. If a bit is set the corresponding slot is |
| * active, if a bit is cleared the corresponding slot is inactive. Bit 0 maps to |
| * the first slot, bit 1 to the second slot and so on. The first active slot |
| * maps to the first channel of the DAI, the second active slot to the second |
| * channel and so on. |
| * |
| * TDM mode can be disabled by passing 0 for @slots. In this case @tx_mask, |
| * @rx_mask and @slot_width will be ignored. |
| * |
| * Returns 0 on success, a negative error code otherwise. |
| */ |
| int snd_soc_dai_set_tdm_slot(struct snd_soc_dai *dai, |
| unsigned int tx_mask, unsigned int rx_mask, |
| int slots, int slot_width) |
| { |
| if (dai->driver->ops->xlate_tdm_slot_mask) |
| dai->driver->ops->xlate_tdm_slot_mask(slots, |
| &tx_mask, &rx_mask); |
| else |
| snd_soc_xlate_tdm_slot_mask(slots, &tx_mask, &rx_mask); |
| |
| dai->tx_mask = tx_mask; |
| dai->rx_mask = rx_mask; |
| |
| if (dai->driver->ops->set_tdm_slot) |
| return dai->driver->ops->set_tdm_slot(dai, tx_mask, rx_mask, |
| slots, slot_width); |
| else |
| return -ENOTSUPP; |
| } |
| EXPORT_SYMBOL_GPL(snd_soc_dai_set_tdm_slot); |
| |
| /** |
| * snd_soc_dai_set_channel_map - configure DAI audio channel map |
| * @dai: DAI |
| * @tx_num: how many TX channels |
| * @tx_slot: pointer to an array which imply the TX slot number channel |
| * 0~num-1 uses |
| * @rx_num: how many RX channels |
| * @rx_slot: pointer to an array which imply the RX slot number channel |
| * 0~num-1 uses |
| * |
| * configure the relationship between channel number and TDM slot number. |
| */ |
| int snd_soc_dai_set_channel_map(struct snd_soc_dai *dai, |
| unsigned int tx_num, unsigned int *tx_slot, |
| unsigned int rx_num, unsigned int *rx_slot) |
| { |
| if (dai->driver->ops->set_channel_map) |
| return dai->driver->ops->set_channel_map(dai, tx_num, tx_slot, |
| rx_num, rx_slot); |
| else |
| return -ENOTSUPP; |
| } |
| EXPORT_SYMBOL_GPL(snd_soc_dai_set_channel_map); |
| |
| /** |
| * snd_soc_dai_get_channel_map - Get DAI audio channel map |
| * @dai: DAI |
| * @tx_num: how many TX channels |
| * @tx_slot: pointer to an array which imply the TX slot number channel |
| * 0~num-1 uses |
| * @rx_num: how many RX channels |
| * @rx_slot: pointer to an array which imply the RX slot number channel |
| * 0~num-1 uses |
| */ |
| int snd_soc_dai_get_channel_map(struct snd_soc_dai *dai, |
| unsigned int *tx_num, unsigned int *tx_slot, |
| unsigned int *rx_num, unsigned int *rx_slot) |
| { |
| if (dai->driver->ops->get_channel_map) |
| return dai->driver->ops->get_channel_map(dai, tx_num, tx_slot, |
| rx_num, rx_slot); |
| else |
| return -ENOTSUPP; |
| } |
| EXPORT_SYMBOL_GPL(snd_soc_dai_get_channel_map); |
| |
| /** |
| * snd_soc_dai_set_tristate - configure DAI system or master clock. |
| * @dai: DAI |
| * @tristate: tristate enable |
| * |
| * Tristates the DAI so that others can use it. |
| */ |
| int snd_soc_dai_set_tristate(struct snd_soc_dai *dai, int tristate) |
| { |
| if (dai->driver->ops->set_tristate) |
| return dai->driver->ops->set_tristate(dai, tristate); |
| else |
| return -EINVAL; |
| } |
| EXPORT_SYMBOL_GPL(snd_soc_dai_set_tristate); |
| |
| /** |
| * snd_soc_dai_digital_mute - configure DAI system or master clock. |
| * @dai: DAI |
| * @mute: mute enable |
| * @direction: stream to mute |
| * |
| * Mutes the DAI DAC. |
| */ |
| int snd_soc_dai_digital_mute(struct snd_soc_dai *dai, int mute, |
| int direction) |
| { |
| if (dai->driver->ops->mute_stream) |
| return dai->driver->ops->mute_stream(dai, mute, direction); |
| else if (direction == SNDRV_PCM_STREAM_PLAYBACK && |
| dai->driver->ops->digital_mute) |
| return dai->driver->ops->digital_mute(dai, mute); |
| else |
| return -ENOTSUPP; |
| } |
| EXPORT_SYMBOL_GPL(snd_soc_dai_digital_mute); |
| |
| int snd_soc_dai_hw_params(struct snd_soc_dai *dai, |
| struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| int ret; |
| |
| /* perform any topology hw_params fixups before DAI */ |
| if (rtd->dai_link->be_hw_params_fixup) { |
| ret = rtd->dai_link->be_hw_params_fixup(rtd, params); |
| if (ret < 0) { |
| dev_err(rtd->dev, |
| "ASoC: hw_params topology fixup failed %d\n", |
| ret); |
| return ret; |
| } |
| } |
| |
| if (dai->driver->ops->hw_params) { |
| ret = dai->driver->ops->hw_params(substream, params, dai); |
| if (ret < 0) { |
| dev_err(dai->dev, "ASoC: can't set %s hw params: %d\n", |
| dai->name, ret); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| void snd_soc_dai_hw_free(struct snd_soc_dai *dai, |
| struct snd_pcm_substream *substream) |
| { |
| if (dai->driver->ops->hw_free) |
| dai->driver->ops->hw_free(substream, dai); |
| } |
| |
| int snd_soc_dai_startup(struct snd_soc_dai *dai, |
| struct snd_pcm_substream *substream) |
| { |
| int ret = 0; |
| |
| if (dai->driver->ops->startup) |
| ret = dai->driver->ops->startup(substream, dai); |
| |
| return ret; |
| } |
| |
| void snd_soc_dai_shutdown(struct snd_soc_dai *dai, |
| struct snd_pcm_substream *substream) |
| { |
| if (dai->driver->ops->shutdown) |
| dai->driver->ops->shutdown(substream, dai); |
| } |
| |
| int snd_soc_dai_prepare(struct snd_soc_dai *dai, |
| struct snd_pcm_substream *substream) |
| { |
| int ret = 0; |
| |
| if (dai->driver->ops->prepare) |
| ret = dai->driver->ops->prepare(substream, dai); |
| |
| return ret; |
| } |
| |
| int snd_soc_dai_trigger(struct snd_soc_dai *dai, |
| struct snd_pcm_substream *substream, |
| int cmd) |
| { |
| int ret = 0; |
| |
| if (dai->driver->ops->trigger) |
| ret = dai->driver->ops->trigger(substream, cmd, dai); |
| |
| return ret; |
| } |
| |
| int snd_soc_dai_bespoke_trigger(struct snd_soc_dai *dai, |
| struct snd_pcm_substream *substream, |
| int cmd) |
| { |
| int ret = 0; |
| |
| if (dai->driver->ops->bespoke_trigger) |
| ret = dai->driver->ops->bespoke_trigger(substream, cmd, dai); |
| |
| return ret; |
| } |
| |
| snd_pcm_sframes_t snd_soc_dai_delay(struct snd_soc_dai *dai, |
| struct snd_pcm_substream *substream) |
| { |
| int delay = 0; |
| |
| if (dai->driver->ops->delay) |
| delay = dai->driver->ops->delay(substream, dai); |
| |
| return delay; |
| } |
| |
| int snd_soc_dai_probe(struct snd_soc_dai *dai) |
| { |
| if (dai->driver->probe) |
| return dai->driver->probe(dai); |
| return 0; |
| } |
| |
| int snd_soc_dai_remove(struct snd_soc_dai *dai) |
| { |
| if (dai->driver->remove) |
| return dai->driver->remove(dai); |
| return 0; |
| } |
| |
| int snd_soc_dai_compress_new(struct snd_soc_dai *dai, |
| struct snd_soc_pcm_runtime *rtd, int num) |
| { |
| if (dai->driver->compress_new) |
| return dai->driver->compress_new(rtd, num); |
| return -ENOTSUPP; |
| } |
| |
| /* |
| * snd_soc_dai_stream_valid() - check if a DAI supports the given stream |
| * |
| * Returns true if the DAI supports the indicated stream type. |
| */ |
| bool snd_soc_dai_stream_valid(struct snd_soc_dai *dai, int dir) |
| { |
| struct snd_soc_pcm_stream *stream; |
| |
| if (dir == SNDRV_PCM_STREAM_PLAYBACK) |
| stream = &dai->driver->playback; |
| else |
| stream = &dai->driver->capture; |
| |
| /* If the codec specifies any channels at all, it supports the stream */ |
| return stream->channels_min; |
| } |