| /* |
| * linux/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c |
| * |
| * Copyright (c) 2010 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com/ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/firmware.h> |
| #include <linux/jiffies.h> |
| #include <linux/sched.h> |
| #include "s5p_mfc_cmd.h" |
| #include "s5p_mfc_common.h" |
| #include "s5p_mfc_debug.h" |
| #include "s5p_mfc_intr.h" |
| #include "s5p_mfc_opr.h" |
| #include "s5p_mfc_pm.h" |
| #include "s5p_mfc_ctrl.h" |
| |
| /* Allocate memory for firmware */ |
| int s5p_mfc_alloc_firmware(struct s5p_mfc_dev *dev) |
| { |
| void *bank2_virt; |
| dma_addr_t bank2_dma_addr; |
| |
| dev->fw_size = dev->variant->buf_size->fw; |
| |
| if (dev->fw_virt_addr) { |
| mfc_err("Attempting to allocate firmware when it seems that it is already loaded\n"); |
| return -ENOMEM; |
| } |
| |
| dev->fw_virt_addr = dma_alloc_coherent(dev->mem_dev_l, dev->fw_size, |
| &dev->bank1, GFP_KERNEL); |
| |
| if (!dev->fw_virt_addr) { |
| mfc_err("Allocating bitprocessor buffer failed\n"); |
| return -ENOMEM; |
| } |
| |
| if (HAS_PORTNUM(dev) && IS_TWOPORT(dev)) { |
| bank2_virt = dma_alloc_coherent(dev->mem_dev_r, 1 << MFC_BASE_ALIGN_ORDER, |
| &bank2_dma_addr, GFP_KERNEL); |
| |
| if (!bank2_virt) { |
| mfc_err("Allocating bank2 base failed\n"); |
| dma_free_coherent(dev->mem_dev_l, dev->fw_size, |
| dev->fw_virt_addr, dev->bank1); |
| dev->fw_virt_addr = NULL; |
| return -ENOMEM; |
| } |
| |
| /* Valid buffers passed to MFC encoder with LAST_FRAME command |
| * should not have address of bank2 - MFC will treat it as a null frame. |
| * To avoid such situation we set bank2 address below the pool address. |
| */ |
| dev->bank2 = bank2_dma_addr - (1 << MFC_BASE_ALIGN_ORDER); |
| |
| dma_free_coherent(dev->mem_dev_r, 1 << MFC_BASE_ALIGN_ORDER, |
| bank2_virt, bank2_dma_addr); |
| |
| } else { |
| /* In this case bank2 can point to the same address as bank1. |
| * Firmware will always occupy the beginning of this area so it is |
| * impossible having a video frame buffer with zero address. */ |
| dev->bank2 = dev->bank1; |
| } |
| return 0; |
| } |
| |
| /* Load firmware */ |
| int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev) |
| { |
| struct firmware *fw_blob; |
| int i, err = -EINVAL; |
| |
| /* Firmare has to be present as a separate file or compiled |
| * into kernel. */ |
| mfc_debug_enter(); |
| |
| for (i = MFC_FW_MAX_VERSIONS - 1; i >= 0; i--) { |
| if (!dev->variant->fw_name[i]) |
| continue; |
| err = request_firmware((const struct firmware **)&fw_blob, |
| dev->variant->fw_name[i], dev->v4l2_dev.dev); |
| if (!err) { |
| dev->fw_ver = (enum s5p_mfc_fw_ver) i; |
| break; |
| } |
| } |
| |
| if (err != 0) { |
| mfc_err("Firmware is not present in the /lib/firmware directory nor compiled in kernel\n"); |
| return -EINVAL; |
| } |
| if (fw_blob->size > dev->fw_size) { |
| mfc_err("MFC firmware is too big to be loaded\n"); |
| release_firmware(fw_blob); |
| return -ENOMEM; |
| } |
| if (!dev->fw_virt_addr) { |
| mfc_err("MFC firmware is not allocated\n"); |
| release_firmware(fw_blob); |
| return -EINVAL; |
| } |
| memcpy(dev->fw_virt_addr, fw_blob->data, fw_blob->size); |
| wmb(); |
| release_firmware(fw_blob); |
| mfc_debug_leave(); |
| return 0; |
| } |
| |
| /* Release firmware memory */ |
| int s5p_mfc_release_firmware(struct s5p_mfc_dev *dev) |
| { |
| /* Before calling this function one has to make sure |
| * that MFC is no longer processing */ |
| if (!dev->fw_virt_addr) |
| return -EINVAL; |
| dma_free_coherent(dev->mem_dev_l, dev->fw_size, dev->fw_virt_addr, |
| dev->bank1); |
| dev->fw_virt_addr = NULL; |
| return 0; |
| } |
| |
| static int s5p_mfc_bus_reset(struct s5p_mfc_dev *dev) |
| { |
| unsigned int status; |
| unsigned long timeout; |
| |
| /* Reset */ |
| mfc_write(dev, 0x1, S5P_FIMV_MFC_BUS_RESET_CTRL); |
| timeout = jiffies + msecs_to_jiffies(MFC_BW_TIMEOUT); |
| /* Check bus status */ |
| do { |
| if (time_after(jiffies, timeout)) { |
| mfc_err("Timeout while resetting MFC.\n"); |
| return -EIO; |
| } |
| status = mfc_read(dev, S5P_FIMV_MFC_BUS_RESET_CTRL); |
| } while ((status & 0x2) == 0); |
| return 0; |
| } |
| |
| /* Reset the device */ |
| int s5p_mfc_reset(struct s5p_mfc_dev *dev) |
| { |
| unsigned int mc_status; |
| unsigned long timeout; |
| int i; |
| |
| mfc_debug_enter(); |
| |
| if (IS_MFCV6_PLUS(dev)) { |
| /* Zero Initialization of MFC registers */ |
| mfc_write(dev, 0, S5P_FIMV_RISC2HOST_CMD_V6); |
| mfc_write(dev, 0, S5P_FIMV_HOST2RISC_CMD_V6); |
| mfc_write(dev, 0, S5P_FIMV_FW_VERSION_V6); |
| |
| for (i = 0; i < S5P_FIMV_REG_CLEAR_COUNT_V6; i++) |
| mfc_write(dev, 0, S5P_FIMV_REG_CLEAR_BEGIN_V6 + (i*4)); |
| |
| /* check bus reset control before reset */ |
| if (dev->risc_on) |
| if (s5p_mfc_bus_reset(dev)) |
| return -EIO; |
| /* Reset |
| * set RISC_ON to 0 during power_on & wake_up. |
| * V6 needs RISC_ON set to 0 during reset also. |
| */ |
| if ((!dev->risc_on) || (!IS_MFCV7_PLUS(dev))) |
| mfc_write(dev, 0, S5P_FIMV_RISC_ON_V6); |
| |
| mfc_write(dev, 0x1FFF, S5P_FIMV_MFC_RESET_V6); |
| mfc_write(dev, 0, S5P_FIMV_MFC_RESET_V6); |
| } else { |
| /* Stop procedure */ |
| /* reset RISC */ |
| mfc_write(dev, 0x3f6, S5P_FIMV_SW_RESET); |
| /* All reset except for MC */ |
| mfc_write(dev, 0x3e2, S5P_FIMV_SW_RESET); |
| mdelay(10); |
| |
| timeout = jiffies + msecs_to_jiffies(MFC_BW_TIMEOUT); |
| /* Check MC status */ |
| do { |
| if (time_after(jiffies, timeout)) { |
| mfc_err("Timeout while resetting MFC\n"); |
| return -EIO; |
| } |
| |
| mc_status = mfc_read(dev, S5P_FIMV_MC_STATUS); |
| |
| } while (mc_status & 0x3); |
| |
| mfc_write(dev, 0x0, S5P_FIMV_SW_RESET); |
| mfc_write(dev, 0x3fe, S5P_FIMV_SW_RESET); |
| } |
| |
| mfc_debug_leave(); |
| return 0; |
| } |
| |
| static inline void s5p_mfc_init_memctrl(struct s5p_mfc_dev *dev) |
| { |
| if (IS_MFCV6_PLUS(dev)) { |
| mfc_write(dev, dev->bank1, S5P_FIMV_RISC_BASE_ADDRESS_V6); |
| mfc_debug(2, "Base Address : %pad\n", &dev->bank1); |
| } else { |
| mfc_write(dev, dev->bank1, S5P_FIMV_MC_DRAMBASE_ADR_A); |
| mfc_write(dev, dev->bank2, S5P_FIMV_MC_DRAMBASE_ADR_B); |
| mfc_debug(2, "Bank1: %pad, Bank2: %pad\n", |
| &dev->bank1, &dev->bank2); |
| } |
| } |
| |
| static inline void s5p_mfc_clear_cmds(struct s5p_mfc_dev *dev) |
| { |
| if (IS_MFCV6_PLUS(dev)) { |
| /* Zero initialization should be done before RESET. |
| * Nothing to do here. */ |
| } else { |
| mfc_write(dev, 0xffffffff, S5P_FIMV_SI_CH0_INST_ID); |
| mfc_write(dev, 0xffffffff, S5P_FIMV_SI_CH1_INST_ID); |
| mfc_write(dev, 0, S5P_FIMV_RISC2HOST_CMD); |
| mfc_write(dev, 0, S5P_FIMV_HOST2RISC_CMD); |
| } |
| } |
| |
| /* Initialize hardware */ |
| int s5p_mfc_init_hw(struct s5p_mfc_dev *dev) |
| { |
| unsigned int ver; |
| int ret; |
| |
| mfc_debug_enter(); |
| if (!dev->fw_virt_addr) { |
| mfc_err("Firmware memory is not allocated.\n"); |
| return -EINVAL; |
| } |
| |
| /* 0. MFC reset */ |
| mfc_debug(2, "MFC reset..\n"); |
| s5p_mfc_clock_on(); |
| dev->risc_on = 0; |
| ret = s5p_mfc_reset(dev); |
| if (ret) { |
| mfc_err("Failed to reset MFC - timeout\n"); |
| return ret; |
| } |
| mfc_debug(2, "Done MFC reset..\n"); |
| /* 1. Set DRAM base Addr */ |
| s5p_mfc_init_memctrl(dev); |
| /* 2. Initialize registers of channel I/F */ |
| s5p_mfc_clear_cmds(dev); |
| /* 3. Release reset signal to the RISC */ |
| s5p_mfc_clean_dev_int_flags(dev); |
| if (IS_MFCV6_PLUS(dev)) { |
| dev->risc_on = 1; |
| mfc_write(dev, 0x1, S5P_FIMV_RISC_ON_V6); |
| } |
| else |
| mfc_write(dev, 0x3ff, S5P_FIMV_SW_RESET); |
| mfc_debug(2, "Will now wait for completion of firmware transfer\n"); |
| if (s5p_mfc_wait_for_done_dev(dev, S5P_MFC_R2H_CMD_FW_STATUS_RET)) { |
| mfc_err("Failed to load firmware\n"); |
| s5p_mfc_reset(dev); |
| s5p_mfc_clock_off(); |
| return -EIO; |
| } |
| s5p_mfc_clean_dev_int_flags(dev); |
| /* 4. Initialize firmware */ |
| ret = s5p_mfc_hw_call(dev->mfc_cmds, sys_init_cmd, dev); |
| if (ret) { |
| mfc_err("Failed to send command to MFC - timeout\n"); |
| s5p_mfc_reset(dev); |
| s5p_mfc_clock_off(); |
| return ret; |
| } |
| mfc_debug(2, "Ok, now will wait for completion of hardware init\n"); |
| if (s5p_mfc_wait_for_done_dev(dev, S5P_MFC_R2H_CMD_SYS_INIT_RET)) { |
| mfc_err("Failed to init hardware\n"); |
| s5p_mfc_reset(dev); |
| s5p_mfc_clock_off(); |
| return -EIO; |
| } |
| dev->int_cond = 0; |
| if (dev->int_err != 0 || dev->int_type != |
| S5P_MFC_R2H_CMD_SYS_INIT_RET) { |
| /* Failure. */ |
| mfc_err("Failed to init firmware - error: %d int: %d\n", |
| dev->int_err, dev->int_type); |
| s5p_mfc_reset(dev); |
| s5p_mfc_clock_off(); |
| return -EIO; |
| } |
| if (IS_MFCV6_PLUS(dev)) |
| ver = mfc_read(dev, S5P_FIMV_FW_VERSION_V6); |
| else |
| ver = mfc_read(dev, S5P_FIMV_FW_VERSION); |
| |
| mfc_debug(2, "MFC F/W version : %02xyy, %02xmm, %02xdd\n", |
| (ver >> 16) & 0xFF, (ver >> 8) & 0xFF, ver & 0xFF); |
| s5p_mfc_clock_off(); |
| mfc_debug_leave(); |
| return 0; |
| } |
| |
| |
| /* Deinitialize hardware */ |
| void s5p_mfc_deinit_hw(struct s5p_mfc_dev *dev) |
| { |
| s5p_mfc_clock_on(); |
| |
| s5p_mfc_reset(dev); |
| s5p_mfc_hw_call_void(dev->mfc_ops, release_dev_context_buffer, dev); |
| |
| s5p_mfc_clock_off(); |
| } |
| |
| int s5p_mfc_sleep(struct s5p_mfc_dev *dev) |
| { |
| int ret; |
| |
| mfc_debug_enter(); |
| s5p_mfc_clock_on(); |
| s5p_mfc_clean_dev_int_flags(dev); |
| ret = s5p_mfc_hw_call(dev->mfc_cmds, sleep_cmd, dev); |
| if (ret) { |
| mfc_err("Failed to send command to MFC - timeout\n"); |
| return ret; |
| } |
| if (s5p_mfc_wait_for_done_dev(dev, S5P_MFC_R2H_CMD_SLEEP_RET)) { |
| mfc_err("Failed to sleep\n"); |
| return -EIO; |
| } |
| s5p_mfc_clock_off(); |
| dev->int_cond = 0; |
| if (dev->int_err != 0 || dev->int_type != |
| S5P_MFC_R2H_CMD_SLEEP_RET) { |
| /* Failure. */ |
| mfc_err("Failed to sleep - error: %d int: %d\n", dev->int_err, |
| dev->int_type); |
| return -EIO; |
| } |
| mfc_debug_leave(); |
| return ret; |
| } |
| |
| static int s5p_mfc_v8_wait_wakeup(struct s5p_mfc_dev *dev) |
| { |
| int ret; |
| |
| /* Release reset signal to the RISC */ |
| dev->risc_on = 1; |
| mfc_write(dev, 0x1, S5P_FIMV_RISC_ON_V6); |
| |
| if (s5p_mfc_wait_for_done_dev(dev, S5P_MFC_R2H_CMD_FW_STATUS_RET)) { |
| mfc_err("Failed to reset MFCV8\n"); |
| return -EIO; |
| } |
| mfc_debug(2, "Write command to wakeup MFCV8\n"); |
| ret = s5p_mfc_hw_call(dev->mfc_cmds, wakeup_cmd, dev); |
| if (ret) { |
| mfc_err("Failed to send command to MFCV8 - timeout\n"); |
| return ret; |
| } |
| |
| if (s5p_mfc_wait_for_done_dev(dev, S5P_MFC_R2H_CMD_WAKEUP_RET)) { |
| mfc_err("Failed to wakeup MFC\n"); |
| return -EIO; |
| } |
| return ret; |
| } |
| |
| static int s5p_mfc_wait_wakeup(struct s5p_mfc_dev *dev) |
| { |
| int ret; |
| |
| /* Send MFC wakeup command */ |
| ret = s5p_mfc_hw_call(dev->mfc_cmds, wakeup_cmd, dev); |
| if (ret) { |
| mfc_err("Failed to send command to MFC - timeout\n"); |
| return ret; |
| } |
| |
| /* Release reset signal to the RISC */ |
| if (IS_MFCV6_PLUS(dev)) { |
| dev->risc_on = 1; |
| mfc_write(dev, 0x1, S5P_FIMV_RISC_ON_V6); |
| } else { |
| mfc_write(dev, 0x3ff, S5P_FIMV_SW_RESET); |
| } |
| |
| if (s5p_mfc_wait_for_done_dev(dev, S5P_MFC_R2H_CMD_WAKEUP_RET)) { |
| mfc_err("Failed to wakeup MFC\n"); |
| return -EIO; |
| } |
| return ret; |
| } |
| |
| int s5p_mfc_wakeup(struct s5p_mfc_dev *dev) |
| { |
| int ret; |
| |
| mfc_debug_enter(); |
| /* 0. MFC reset */ |
| mfc_debug(2, "MFC reset..\n"); |
| s5p_mfc_clock_on(); |
| dev->risc_on = 0; |
| ret = s5p_mfc_reset(dev); |
| if (ret) { |
| mfc_err("Failed to reset MFC - timeout\n"); |
| s5p_mfc_clock_off(); |
| return ret; |
| } |
| mfc_debug(2, "Done MFC reset..\n"); |
| /* 1. Set DRAM base Addr */ |
| s5p_mfc_init_memctrl(dev); |
| /* 2. Initialize registers of channel I/F */ |
| s5p_mfc_clear_cmds(dev); |
| s5p_mfc_clean_dev_int_flags(dev); |
| /* 3. Send MFC wakeup command and wait for completion*/ |
| if (IS_MFCV8(dev)) |
| ret = s5p_mfc_v8_wait_wakeup(dev); |
| else |
| ret = s5p_mfc_wait_wakeup(dev); |
| |
| s5p_mfc_clock_off(); |
| if (ret) |
| return ret; |
| |
| dev->int_cond = 0; |
| if (dev->int_err != 0 || dev->int_type != |
| S5P_MFC_R2H_CMD_WAKEUP_RET) { |
| /* Failure. */ |
| mfc_err("Failed to wakeup - error: %d int: %d\n", dev->int_err, |
| dev->int_type); |
| return -EIO; |
| } |
| mfc_debug_leave(); |
| return 0; |
| } |
| |
| int s5p_mfc_open_mfc_inst(struct s5p_mfc_dev *dev, struct s5p_mfc_ctx *ctx) |
| { |
| int ret = 0; |
| |
| ret = s5p_mfc_hw_call(dev->mfc_ops, alloc_instance_buffer, ctx); |
| if (ret) { |
| mfc_err("Failed allocating instance buffer\n"); |
| goto err; |
| } |
| |
| if (ctx->type == MFCINST_DECODER) { |
| ret = s5p_mfc_hw_call(dev->mfc_ops, |
| alloc_dec_temp_buffers, ctx); |
| if (ret) { |
| mfc_err("Failed allocating temporary buffers\n"); |
| goto err_free_inst_buf; |
| } |
| } |
| |
| set_work_bit_irqsave(ctx); |
| s5p_mfc_hw_call_void(dev->mfc_ops, try_run, dev); |
| if (s5p_mfc_wait_for_done_ctx(ctx, |
| S5P_MFC_R2H_CMD_OPEN_INSTANCE_RET, 0)) { |
| /* Error or timeout */ |
| mfc_err("Error getting instance from hardware\n"); |
| ret = -EIO; |
| goto err_free_desc_buf; |
| } |
| |
| mfc_debug(2, "Got instance number: %d\n", ctx->inst_no); |
| return ret; |
| |
| err_free_desc_buf: |
| if (ctx->type == MFCINST_DECODER) |
| s5p_mfc_hw_call_void(dev->mfc_ops, release_dec_desc_buffer, ctx); |
| err_free_inst_buf: |
| s5p_mfc_hw_call_void(dev->mfc_ops, release_instance_buffer, ctx); |
| err: |
| return ret; |
| } |
| |
| void s5p_mfc_close_mfc_inst(struct s5p_mfc_dev *dev, struct s5p_mfc_ctx *ctx) |
| { |
| ctx->state = MFCINST_RETURN_INST; |
| set_work_bit_irqsave(ctx); |
| s5p_mfc_hw_call_void(dev->mfc_ops, try_run, dev); |
| /* Wait until instance is returned or timeout occurred */ |
| if (s5p_mfc_wait_for_done_ctx(ctx, |
| S5P_MFC_R2H_CMD_CLOSE_INSTANCE_RET, 0)) |
| mfc_err("Err returning instance\n"); |
| |
| /* Free resources */ |
| s5p_mfc_hw_call_void(dev->mfc_ops, release_codec_buffers, ctx); |
| s5p_mfc_hw_call_void(dev->mfc_ops, release_instance_buffer, ctx); |
| if (ctx->type == MFCINST_DECODER) |
| s5p_mfc_hw_call_void(dev->mfc_ops, release_dec_desc_buffer, ctx); |
| |
| ctx->inst_no = MFC_NO_INSTANCE_SET; |
| ctx->state = MFCINST_FREE; |
| } |