| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2011 by Kevin Cernekee (cernekee@gmail.com) |
| * |
| * Definitions for BMIPS processors |
| */ |
| #ifndef _ASM_BMIPS_H |
| #define _ASM_BMIPS_H |
| |
| #include <linux/compiler.h> |
| #include <linux/linkage.h> |
| #include <asm/addrspace.h> |
| #include <asm/mipsregs.h> |
| #include <asm/hazards.h> |
| |
| /* NOTE: the CBR register returns a PA, and it can be above 0xff00_0000 */ |
| #define BMIPS_GET_CBR() ((void __iomem *)(CKSEG1 | \ |
| (unsigned long) \ |
| ((read_c0_brcm_cbr() >> 18) << 18))) |
| |
| #define BMIPS_RAC_CONFIG 0x00000000 |
| #define BMIPS_RAC_ADDRESS_RANGE 0x00000004 |
| #define BMIPS_RAC_CONFIG_1 0x00000008 |
| #define BMIPS_L2_CONFIG 0x0000000c |
| #define BMIPS_LMB_CONTROL 0x0000001c |
| #define BMIPS_SYSTEM_BASE 0x00000020 |
| #define BMIPS_PERF_GLOBAL_CONTROL 0x00020000 |
| #define BMIPS_PERF_CONTROL_0 0x00020004 |
| #define BMIPS_PERF_CONTROL_1 0x00020008 |
| #define BMIPS_PERF_COUNTER_0 0x00020010 |
| #define BMIPS_PERF_COUNTER_1 0x00020014 |
| #define BMIPS_PERF_COUNTER_2 0x00020018 |
| #define BMIPS_PERF_COUNTER_3 0x0002001c |
| #define BMIPS_RELO_VECTOR_CONTROL_0 0x00030000 |
| #define BMIPS_RELO_VECTOR_CONTROL_1 0x00038000 |
| |
| #define BMIPS_NMI_RESET_VEC 0x80000000 |
| #define BMIPS_WARM_RESTART_VEC 0x80000380 |
| |
| #define ZSCM_REG_BASE 0x97000000 |
| |
| #if !defined(__ASSEMBLY__) |
| |
| #include <linux/cpumask.h> |
| #include <asm/r4kcache.h> |
| #include <asm/smp-ops.h> |
| |
| extern struct plat_smp_ops bmips43xx_smp_ops; |
| extern struct plat_smp_ops bmips5000_smp_ops; |
| |
| static inline int register_bmips_smp_ops(void) |
| { |
| #if IS_ENABLED(CONFIG_CPU_BMIPS) && IS_ENABLED(CONFIG_SMP) |
| switch (current_cpu_type()) { |
| case CPU_BMIPS32: |
| case CPU_BMIPS3300: |
| return register_up_smp_ops(); |
| case CPU_BMIPS4350: |
| case CPU_BMIPS4380: |
| register_smp_ops(&bmips43xx_smp_ops); |
| break; |
| case CPU_BMIPS5000: |
| register_smp_ops(&bmips5000_smp_ops); |
| break; |
| default: |
| return -ENODEV; |
| } |
| |
| return 0; |
| #else |
| return -ENODEV; |
| #endif |
| } |
| |
| extern char bmips_reset_nmi_vec; |
| extern char bmips_reset_nmi_vec_end; |
| extern char bmips_smp_movevec; |
| extern char bmips_smp_int_vec; |
| extern char bmips_smp_int_vec_end; |
| |
| extern int bmips_smp_enabled; |
| extern int bmips_cpu_offset; |
| extern cpumask_t bmips_booted_mask; |
| extern unsigned long bmips_tp1_irqs; |
| |
| extern void bmips_ebase_setup(void); |
| extern asmlinkage void plat_wired_tlb_setup(void); |
| |
| static inline unsigned long bmips_read_zscm_reg(unsigned int offset) |
| { |
| unsigned long ret; |
| |
| barrier(); |
| cache_op(Index_Load_Tag_S, ZSCM_REG_BASE + offset); |
| __sync(); |
| _ssnop(); |
| _ssnop(); |
| _ssnop(); |
| _ssnop(); |
| _ssnop(); |
| _ssnop(); |
| _ssnop(); |
| ret = read_c0_ddatalo(); |
| _ssnop(); |
| |
| return ret; |
| } |
| |
| static inline void bmips_write_zscm_reg(unsigned int offset, unsigned long data) |
| { |
| write_c0_ddatalo(data); |
| _ssnop(); |
| _ssnop(); |
| _ssnop(); |
| cache_op(Index_Store_Tag_S, ZSCM_REG_BASE + offset); |
| _ssnop(); |
| _ssnop(); |
| _ssnop(); |
| barrier(); |
| } |
| |
| #endif /* !defined(__ASSEMBLY__) */ |
| |
| #endif /* _ASM_BMIPS_H */ |