| /* |
| * Copyright (C) 2009 Extreme Engineering Solutions, Inc. |
| * |
| * X-ES board-specific functionality |
| * |
| * Based on mpc85xx_ds code from Freescale Semiconductor, Inc. |
| * |
| * Author: Nate Case <ncase@xes-inc.com> |
| * |
| * This is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/stddef.h> |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/kdev_t.h> |
| #include <linux/delay.h> |
| #include <linux/seq_file.h> |
| #include <linux/interrupt.h> |
| #include <linux/of_platform.h> |
| |
| #include <asm/system.h> |
| #include <asm/time.h> |
| #include <asm/machdep.h> |
| #include <asm/pci-bridge.h> |
| #include <mm/mmu_decl.h> |
| #include <asm/prom.h> |
| #include <asm/udbg.h> |
| #include <asm/mpic.h> |
| |
| #include <sysdev/fsl_soc.h> |
| #include <sysdev/fsl_pci.h> |
| #include "smp.h" |
| |
| #include "mpc85xx.h" |
| |
| /* A few bit definitions needed for fixups on some boards */ |
| #define MPC85xx_L2CTL_L2E 0x80000000 /* L2 enable */ |
| #define MPC85xx_L2CTL_L2I 0x40000000 /* L2 flash invalidate */ |
| #define MPC85xx_L2CTL_L2SIZ_MASK 0x30000000 /* L2 SRAM size (R/O) */ |
| |
| void __init xes_mpc85xx_pic_init(void) |
| { |
| struct mpic *mpic = mpic_alloc(NULL, 0, |
| MPIC_WANTS_RESET | |
| MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS, |
| 0, 256, " OpenPIC "); |
| BUG_ON(mpic == NULL); |
| mpic_init(mpic); |
| } |
| |
| static void xes_mpc85xx_configure_l2(void __iomem *l2_base) |
| { |
| volatile uint32_t ctl, tmp; |
| |
| asm volatile("msync; isync"); |
| tmp = in_be32(l2_base); |
| |
| /* |
| * xMon may have enabled part of L2 as SRAM, so we need to set it |
| * up for all cache mode just to be safe. |
| */ |
| printk(KERN_INFO "xes_mpc85xx: Enabling L2 as cache\n"); |
| |
| ctl = MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2I; |
| if (of_machine_is_compatible("MPC8540") || |
| of_machine_is_compatible("MPC8560")) |
| /* |
| * Assume L2 SRAM is used fully for cache, so set |
| * L2BLKSZ (bits 4:5) to match L2SIZ (bits 2:3). |
| */ |
| ctl |= (tmp & MPC85xx_L2CTL_L2SIZ_MASK) >> 2; |
| |
| asm volatile("msync; isync"); |
| out_be32(l2_base, ctl); |
| asm volatile("msync; isync"); |
| } |
| |
| static void xes_mpc85xx_fixups(void) |
| { |
| struct device_node *np; |
| int err; |
| |
| /* |
| * Legacy xMon firmware on some X-ES boards does not enable L2 |
| * as cache. We must ensure that they get enabled here. |
| */ |
| for_each_node_by_name(np, "l2-cache-controller") { |
| struct resource r[2]; |
| void __iomem *l2_base; |
| |
| /* Only MPC8548, MPC8540, and MPC8560 boards are affected */ |
| if (!of_device_is_compatible(np, |
| "fsl,mpc8548-l2-cache-controller") && |
| !of_device_is_compatible(np, |
| "fsl,mpc8540-l2-cache-controller") && |
| !of_device_is_compatible(np, |
| "fsl,mpc8560-l2-cache-controller")) |
| continue; |
| |
| err = of_address_to_resource(np, 0, &r[0]); |
| if (err) { |
| printk(KERN_WARNING "xes_mpc85xx: Could not get " |
| "resource for device tree node '%s'", |
| np->full_name); |
| continue; |
| } |
| |
| l2_base = ioremap(r[0].start, resource_size(&r[0])); |
| |
| xes_mpc85xx_configure_l2(l2_base); |
| } |
| } |
| |
| #ifdef CONFIG_PCI |
| static int primary_phb_addr; |
| #endif |
| |
| /* |
| * Setup the architecture |
| */ |
| static void __init xes_mpc85xx_setup_arch(void) |
| { |
| #ifdef CONFIG_PCI |
| struct device_node *np; |
| #endif |
| struct device_node *root; |
| const char *model = "Unknown"; |
| |
| root = of_find_node_by_path("/"); |
| if (root == NULL) |
| return; |
| |
| model = of_get_property(root, "model", NULL); |
| |
| printk(KERN_INFO "X-ES MPC85xx-based single-board computer: %s\n", |
| model + strlen("xes,")); |
| |
| xes_mpc85xx_fixups(); |
| |
| #ifdef CONFIG_PCI |
| for_each_node_by_type(np, "pci") { |
| if (of_device_is_compatible(np, "fsl,mpc8540-pci") || |
| of_device_is_compatible(np, "fsl,mpc8548-pcie")) { |
| struct resource rsrc; |
| of_address_to_resource(np, 0, &rsrc); |
| if ((rsrc.start & 0xfffff) == primary_phb_addr) |
| fsl_add_bridge(np, 1); |
| else |
| fsl_add_bridge(np, 0); |
| } |
| } |
| #endif |
| |
| mpc85xx_smp_init(); |
| } |
| |
| machine_device_initcall(xes_mpc8572, mpc85xx_common_publish_devices); |
| machine_device_initcall(xes_mpc8548, mpc85xx_common_publish_devices); |
| machine_device_initcall(xes_mpc8540, mpc85xx_common_publish_devices); |
| |
| /* |
| * Called very early, device-tree isn't unflattened |
| */ |
| static int __init xes_mpc8572_probe(void) |
| { |
| unsigned long root = of_get_flat_dt_root(); |
| |
| if (of_flat_dt_is_compatible(root, "xes,MPC8572")) { |
| #ifdef CONFIG_PCI |
| primary_phb_addr = 0x8000; |
| #endif |
| return 1; |
| } else { |
| return 0; |
| } |
| } |
| |
| static int __init xes_mpc8548_probe(void) |
| { |
| unsigned long root = of_get_flat_dt_root(); |
| |
| if (of_flat_dt_is_compatible(root, "xes,MPC8548")) { |
| #ifdef CONFIG_PCI |
| primary_phb_addr = 0xb000; |
| #endif |
| return 1; |
| } else { |
| return 0; |
| } |
| } |
| |
| static int __init xes_mpc8540_probe(void) |
| { |
| unsigned long root = of_get_flat_dt_root(); |
| |
| if (of_flat_dt_is_compatible(root, "xes,MPC8540")) { |
| #ifdef CONFIG_PCI |
| primary_phb_addr = 0xb000; |
| #endif |
| return 1; |
| } else { |
| return 0; |
| } |
| } |
| |
| define_machine(xes_mpc8572) { |
| .name = "X-ES MPC8572", |
| .probe = xes_mpc8572_probe, |
| .setup_arch = xes_mpc85xx_setup_arch, |
| .init_IRQ = xes_mpc85xx_pic_init, |
| #ifdef CONFIG_PCI |
| .pcibios_fixup_bus = fsl_pcibios_fixup_bus, |
| #endif |
| .get_irq = mpic_get_irq, |
| .restart = fsl_rstcr_restart, |
| .calibrate_decr = generic_calibrate_decr, |
| .progress = udbg_progress, |
| }; |
| |
| define_machine(xes_mpc8548) { |
| .name = "X-ES MPC8548", |
| .probe = xes_mpc8548_probe, |
| .setup_arch = xes_mpc85xx_setup_arch, |
| .init_IRQ = xes_mpc85xx_pic_init, |
| #ifdef CONFIG_PCI |
| .pcibios_fixup_bus = fsl_pcibios_fixup_bus, |
| #endif |
| .get_irq = mpic_get_irq, |
| .restart = fsl_rstcr_restart, |
| .calibrate_decr = generic_calibrate_decr, |
| .progress = udbg_progress, |
| }; |
| |
| define_machine(xes_mpc8540) { |
| .name = "X-ES MPC8540", |
| .probe = xes_mpc8540_probe, |
| .setup_arch = xes_mpc85xx_setup_arch, |
| .init_IRQ = xes_mpc85xx_pic_init, |
| #ifdef CONFIG_PCI |
| .pcibios_fixup_bus = fsl_pcibios_fixup_bus, |
| #endif |
| .get_irq = mpic_get_irq, |
| .restart = fsl_rstcr_restart, |
| .calibrate_decr = generic_calibrate_decr, |
| .progress = udbg_progress, |
| }; |