Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"I had queued up a batch of fixes that got a bit close to the release
for sending in before the merge window opened, so I'm including them
in the merge window batch instead.
Mostly smaller DT tweaks and fixes, the usual mix that we tend to have
through the releases"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: iwg20d-q7-common: Fix touch controller probe failure
ARM: OMAP2+: Restore MPU power domain if cpu_cluster_pm_enter() fails
ARM: dts: am33xx: modify AM33XX_IOPAD for #pinctrl-cells = 2
soc: actions: include header to fix missing prototype
arm64: dts: ti: k3-j721e: Rename mux header and update macro names
soc: qcom: pdr: Fixup array type of get_domain_list_resp message
arm64: dts: qcom: pm660: Fix missing pound sign in interrupt-cells
arm64: dts: qcom: kitakami: Temporarily disable SDHCI1
arm64: dts: sdm630: Temporarily disable SMMUs by default
arm64: dts: sdm845: Fixup OPP table for all qup devices
arm64: dts: allwinner: h5: remove Mali GPU PMU module
ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix dcdc1 regulator
soc: xilinx: Fix error code in zynqmp_pm_probe()
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index ebbe151..63cafd2 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -57,7 +57,7 @@ lcd_backlight: backlight {
lvds-receiver {
compatible = "ti,ds90cf384a", "lvds-decoder";
- powerdown-gpios = <&gpio7 25 GPIO_ACTIVE_LOW>;
+ power-supply = <&vcc_3v3_tft1>;
ports {
#address-cells = <1>;
@@ -81,6 +81,7 @@ lvds_receiver_out: endpoint {
panel {
compatible = "edt,etm0700g0dh6";
backlight = <&lcd_backlight>;
+ power-supply = <&vcc_3v3_tft1>;
port {
panel_in: endpoint {
@@ -113,6 +114,17 @@ sndcodec: simple-audio-card,codec {
};
};
+ vcc_3v3_tft1: regulator-panel {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vcc-3v3-tft1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ startup-delay-us = <500>;
+ gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
+ };
+
vcc_sdhi1: regulator-vcc-sdhi1 {
compatible = "regulator-fixed";
@@ -207,6 +219,7 @@ touch: touchpanel@38 {
reg = <0x38>;
interrupt-parent = <&gpio2>;
interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+ vcc-supply = <&vcc_3v3_tft1>;
};
};
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index 42d62d1..ea15073 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -223,16 +223,16 @@ ®_aldo3 {
};
®_dc1sw {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-name = "vcc-gmac-phy";
};
®_dcdc1 {
regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "vcc-3v0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
};
®_dcdc2 {
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index 6f5f897..a92d277 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -174,8 +174,10 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
*/
if (mpuss_can_lose_context) {
error = cpu_cluster_pm_enter();
- if (error)
+ if (error) {
+ omap_set_pwrdm_state(mpu_pd, PWRDM_POWER_ON);
goto cpu_cluster_pm_out;
+ }
}
}
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index 6735e31..6c6053a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -139,8 +139,7 @@ mali: gpu@1e80000 {
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "gp",
"gpmmu",
"pp",
@@ -151,8 +150,7 @@ mali: gpu@1e80000 {
"pp2",
"ppmmu2",
"pp3",
- "ppmmu3",
- "pmu";
+ "ppmmu3";
clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
clock-names = "bus", "core";
resets = <&ccu RST_BUS_GPU>;
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
index 4032b74..791f254 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -221,7 +221,12 @@ pmi8994_regulators: pmi8994-regulators {
};
&sdhc1 {
- status = "okay";
+ /* There is an issue with the eMMC causing permanent
+ * damage to the card if a quirk isn't addressed.
+ * Until it's fixed, disable the MMC so as not to brick
+ * devices.
+ */
+ status = "disabled";
/* Downstream pushes 2.95V to the sdhci device,
* but upstream driver REALLY wants to make vmmc 1.8v
diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi
index ea0e955..2e6a6f6 100644
--- a/arch/arm64/boot/dts/qcom/pm660.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm660.dtsi
@@ -44,7 +44,7 @@ pm660_gpios: gpios@c000 {
gpio-ranges = <&pm660_gpios 0 0 13>;
#gpio-cells = <2>;
interrupt-controller;
- interrupt-cells =<2>;
+ #interrupt-cells = <2>;
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 88efe82..deb928d 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -518,6 +518,8 @@ anoc2_smmu: iommu@16c0000 {
<GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
+
+ status = "disabled";
};
tcsr_mutex_regs: syscon@1f40000 {
@@ -749,6 +751,8 @@ kgsl_smmu: iommu@5040000 {
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>;
+
+ status = "disabled";
};
lpass_smmu: iommu@5100000 {
@@ -778,6 +782,8 @@ lpass_smmu: iommu@5100000 {
<GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+
+ status = "disabled";
};
spmi_bus: spmi@800f000 {
@@ -1074,6 +1080,8 @@ mmss_smmu: iommu@cd00000 {
<GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
+
+ status = "disabled";
};
apcs_glb: mailbox@17911000 {
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 2884577..eca81cf 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -1093,8 +1093,8 @@ rng: rng@793000 {
qup_opp_table: qup-opp-table {
compatible = "operating-points-v2";
- opp-19200000 {
- opp-hz = /bits/ 64 <19200000>;
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
required-opps = <&rpmhpd_opp_min_svs>;
};
@@ -1107,6 +1107,11 @@ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_svs>;
};
+
+ opp-128000000 {
+ opp-hz = /bits/ 64 <128000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
};
qupv3_id_0: geniqup@8c0000 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index e8fc01d..6f7490e 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -404,11 +404,12 @@ &usb_serdes_mux {
};
&serdes_ln_ctrl {
- idle-states = <SERDES0_LANE0_PCIE0_LANE0>, <SERDES0_LANE1_PCIE0_LANE1>,
- <SERDES1_LANE0_PCIE1_LANE0>, <SERDES1_LANE1_PCIE1_LANE1>,
- <SERDES2_LANE0_PCIE2_LANE0>, <SERDES2_LANE1_PCIE2_LANE1>,
- <SERDES3_LANE0_USB3_0_SWAP>, <SERDES3_LANE1_USB3_0>,
- <SERDES4_LANE0_EDP_LANE0>, <SERDES4_LANE1_EDP_LANE1>, <SERDES4_LANE2_EDP_LANE2>, <SERDES4_LANE3_EDP_LANE3>;
+ idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_PCIE0_LANE1>,
+ <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
+ <J721E_SERDES2_LANE0_PCIE2_LANE0>, <J721E_SERDES2_LANE1_PCIE2_LANE1>,
+ <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>,
+ <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
+ <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
};
&serdes_wiz3 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 12ceea9..63d221a 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -6,7 +6,7 @@
*/
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/mux/mux.h>
-#include <dt-bindings/mux/mux-j721e-wiz.h>
+#include <dt-bindings/mux/ti-serdes.h>
&cbass_main {
msmc_ram: sram@70000000 {
@@ -38,11 +38,12 @@ serdes_ln_ctrl: serdes-ln-ctrl@4080 {
<0x40b0 0x3>, <0x40b4 0x3>, /* SERDES3 lane0/1 select */
<0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>;
/* SERDES4 lane0/1/2/3 select */
- idle-states = <SERDES0_LANE0_PCIE0_LANE0>, <SERDES0_LANE1_PCIE0_LANE1>,
- <SERDES1_LANE0_PCIE1_LANE0>, <SERDES1_LANE1_PCIE1_LANE1>,
- <SERDES2_LANE0_PCIE2_LANE0>, <SERDES2_LANE1_PCIE2_LANE1>,
- <MUX_IDLE_AS_IS>, <SERDES3_LANE1_USB3_0>,
- <SERDES4_LANE0_EDP_LANE0>, <SERDES4_LANE1_EDP_LANE1>, <SERDES4_LANE2_EDP_LANE2>, <SERDES4_LANE3_EDP_LANE3>;
+ idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_PCIE0_LANE1>,
+ <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
+ <J721E_SERDES2_LANE0_PCIE2_LANE0>, <J721E_SERDES2_LANE1_PCIE2_LANE1>,
+ <MUX_IDLE_AS_IS>, <J721E_SERDES3_LANE1_USB3_0>,
+ <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
+ <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
};
usb_serdes_mux: mux-controller@4000 {
diff --git a/drivers/soc/actions/owl-sps-helper.c b/drivers/soc/actions/owl-sps-helper.c
index 291a206..e3f3660 100644
--- a/drivers/soc/actions/owl-sps-helper.c
+++ b/drivers/soc/actions/owl-sps-helper.c
@@ -10,6 +10,7 @@
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/soc/actions/owl-sps.h>
#define OWL_SPS_PG_CTL 0x0
diff --git a/drivers/soc/qcom/pdr_internal.h b/drivers/soc/qcom/pdr_internal.h
index 15b5002..ab9ae8c 100644
--- a/drivers/soc/qcom/pdr_internal.h
+++ b/drivers/soc/qcom/pdr_internal.h
@@ -185,7 +185,7 @@ struct qmi_elem_info servreg_get_domain_list_resp_ei[] = {
.data_type = QMI_STRUCT,
.elem_len = SERVREG_DOMAIN_LIST_LENGTH,
.elem_size = sizeof(struct servreg_location_entry),
- .array_type = NO_ARRAY,
+ .array_type = VAR_LEN_ARRAY,
.tlv_type = 0x12,
.offset = offsetof(struct servreg_get_domain_list_resp,
domain_list),
diff --git a/drivers/soc/xilinx/zynqmp_power.c b/drivers/soc/xilinx/zynqmp_power.c
index 31ff49f..c556623 100644
--- a/drivers/soc/xilinx/zynqmp_power.c
+++ b/drivers/soc/xilinx/zynqmp_power.c
@@ -205,7 +205,7 @@ static int zynqmp_pm_probe(struct platform_device *pdev)
rx_chan = mbox_request_channel_byname(client, "rx");
if (IS_ERR(rx_chan)) {
dev_err(&pdev->dev, "Failed to request rx channel\n");
- return IS_ERR(rx_chan);
+ return PTR_ERR(rx_chan);
}
} else if (of_find_property(pdev->dev.of_node, "interrupts", NULL)) {
irq = platform_get_irq(pdev, 0);
diff --git a/include/dt-bindings/mux/mux-j721e-wiz.h b/include/dt-bindings/mux/mux-j721e-wiz.h
deleted file mode 100644
index fd1c4ea..0000000
--- a/include/dt-bindings/mux/mux-j721e-wiz.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * This header provides constants for J721E WIZ.
- */
-
-#ifndef _DT_BINDINGS_J721E_WIZ
-#define _DT_BINDINGS_J721E_WIZ
-
-#define SERDES0_LANE0_QSGMII_LANE1 0x0
-#define SERDES0_LANE0_PCIE0_LANE0 0x1
-#define SERDES0_LANE0_USB3_0_SWAP 0x2
-
-#define SERDES0_LANE1_QSGMII_LANE2 0x0
-#define SERDES0_LANE1_PCIE0_LANE1 0x1
-#define SERDES0_LANE1_USB3_0 0x2
-
-#define SERDES1_LANE0_QSGMII_LANE3 0x0
-#define SERDES1_LANE0_PCIE1_LANE0 0x1
-#define SERDES1_LANE0_USB3_1_SWAP 0x2
-#define SERDES1_LANE0_SGMII_LANE0 0x3
-
-#define SERDES1_LANE1_QSGMII_LANE4 0x0
-#define SERDES1_LANE1_PCIE1_LANE1 0x1
-#define SERDES1_LANE1_USB3_1 0x2
-#define SERDES1_LANE1_SGMII_LANE1 0x3
-
-#define SERDES2_LANE0_PCIE2_LANE0 0x1
-#define SERDES2_LANE0_SGMII_LANE0 0x3
-#define SERDES2_LANE0_USB3_1_SWAP 0x2
-
-#define SERDES2_LANE1_PCIE2_LANE1 0x1
-#define SERDES2_LANE1_USB3_1 0x2
-#define SERDES2_LANE1_SGMII_LANE1 0x3
-
-#define SERDES3_LANE0_PCIE3_LANE0 0x1
-#define SERDES3_LANE0_USB3_0_SWAP 0x2
-
-#define SERDES3_LANE1_PCIE3_LANE1 0x1
-#define SERDES3_LANE1_USB3_0 0x2
-
-#define SERDES4_LANE0_EDP_LANE0 0x0
-#define SERDES4_LANE0_QSGMII_LANE5 0x2
-
-#define SERDES4_LANE1_EDP_LANE1 0x0
-#define SERDES4_LANE1_QSGMII_LANE6 0x2
-
-#define SERDES4_LANE2_EDP_LANE2 0x0
-#define SERDES4_LANE2_QSGMII_LANE7 0x2
-
-#define SERDES4_LANE3_EDP_LANE3 0x0
-#define SERDES4_LANE3_QSGMII_LANE8 0x2
-
-#endif /* _DT_BINDINGS_J721E_WIZ */
diff --git a/include/dt-bindings/mux/ti-serdes.h b/include/dt-bindings/mux/ti-serdes.h
new file mode 100644
index 0000000..146d068
--- /dev/null
+++ b/include/dt-bindings/mux/ti-serdes.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides constants for SERDES MUX for TI SoCs
+ */
+
+#ifndef _DT_BINDINGS_MUX_TI_SERDES
+#define _DT_BINDINGS_MUX_TI_SERDES
+
+/* J721E */
+
+#define J721E_SERDES0_LANE0_QSGMII_LANE1 0x0
+#define J721E_SERDES0_LANE0_PCIE0_LANE0 0x1
+#define J721E_SERDES0_LANE0_USB3_0_SWAP 0x2
+#define J721E_SERDES0_LANE0_IP4_UNUSED 0x3
+
+#define J721E_SERDES0_LANE1_QSGMII_LANE2 0x0
+#define J721E_SERDES0_LANE1_PCIE0_LANE1 0x1
+#define J721E_SERDES0_LANE1_USB3_0 0x2
+#define J721E_SERDES0_LANE1_IP4_UNUSED 0x3
+
+#define J721E_SERDES1_LANE0_QSGMII_LANE3 0x0
+#define J721E_SERDES1_LANE0_PCIE1_LANE0 0x1
+#define J721E_SERDES1_LANE0_USB3_1_SWAP 0x2
+#define J721E_SERDES1_LANE0_SGMII_LANE0 0x3
+
+#define J721E_SERDES1_LANE1_QSGMII_LANE4 0x0
+#define J721E_SERDES1_LANE1_PCIE1_LANE1 0x1
+#define J721E_SERDES1_LANE1_USB3_1 0x2
+#define J721E_SERDES1_LANE1_SGMII_LANE1 0x3
+
+#define J721E_SERDES2_LANE0_IP1_UNUSED 0x0
+#define J721E_SERDES2_LANE0_PCIE2_LANE0 0x1
+#define J721E_SERDES2_LANE0_USB3_1_SWAP 0x2
+#define J721E_SERDES2_LANE0_SGMII_LANE0 0x3
+
+#define J721E_SERDES2_LANE1_IP1_UNUSED 0x0
+#define J721E_SERDES2_LANE1_PCIE2_LANE1 0x1
+#define J721E_SERDES2_LANE1_USB3_1 0x2
+#define J721E_SERDES2_LANE1_SGMII_LANE1 0x3
+
+#define J721E_SERDES3_LANE0_IP1_UNUSED 0x0
+#define J721E_SERDES3_LANE0_PCIE3_LANE0 0x1
+#define J721E_SERDES3_LANE0_USB3_0_SWAP 0x2
+#define J721E_SERDES3_LANE0_IP4_UNUSED 0x3
+
+#define J721E_SERDES3_LANE1_IP1_UNUSED 0x0
+#define J721E_SERDES3_LANE1_PCIE3_LANE1 0x1
+#define J721E_SERDES3_LANE1_USB3_0 0x2
+#define J721E_SERDES3_LANE1_IP4_UNUSED 0x3
+
+#define J721E_SERDES4_LANE0_EDP_LANE0 0x0
+#define J721E_SERDES4_LANE0_IP2_UNUSED 0x1
+#define J721E_SERDES4_LANE0_QSGMII_LANE5 0x2
+#define J721E_SERDES4_LANE0_IP4_UNUSED 0x3
+
+#define J721E_SERDES4_LANE1_EDP_LANE1 0x0
+#define J721E_SERDES4_LANE1_IP2_UNUSED 0x1
+#define J721E_SERDES4_LANE1_QSGMII_LANE6 0x2
+#define J721E_SERDES4_LANE1_IP4_UNUSED 0x3
+
+#define J721E_SERDES4_LANE2_EDP_LANE2 0x0
+#define J721E_SERDES4_LANE2_IP2_UNUSED 0x1
+#define J721E_SERDES4_LANE2_QSGMII_LANE7 0x2
+#define J721E_SERDES4_LANE2_IP4_UNUSED 0x3
+
+#define J721E_SERDES4_LANE3_EDP_LANE3 0x0
+#define J721E_SERDES4_LANE3_IP2_UNUSED 0x1
+#define J721E_SERDES4_LANE3_QSGMII_LANE8 0x2
+#define J721E_SERDES4_LANE3_IP4_UNUSED 0x3
+
+#endif /* _DT_BINDINGS_MUX_TI_SERDES */
diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h
index 2d2a8c7..f48245f 100644
--- a/include/dt-bindings/pinctrl/omap.h
+++ b/include/dt-bindings/pinctrl/omap.h
@@ -64,7 +64,7 @@
#define OMAP3_WKUP_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x2a00) (val)
#define DM814X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
#define DM816X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
-#define AM33XX_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
+#define AM33XX_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val) (0)
#define AM33XX_PADCONF(pa, conf, mux) OMAP_IOPAD_OFFSET((pa), 0x0800) (conf) (mux)
/*
