| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Unisoc Sharkl3 platform DTS file |
| * |
| * Copyright (C) 2019, Unisoc Inc. |
| */ |
| |
| / { |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| soc: soc { |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| ap_ahb_regs: syscon@20e00000 { |
| compatible = "sprd,sc9863a-glbregs", "syscon", |
| "simple-mfd"; |
| reg = <0 0x20e00000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0x20e00000 0x4000>; |
| |
| apahb_gate: apahb-gate { |
| compatible = "sprd,sc9863a-apahb-gate"; |
| reg = <0x0 0x1020>; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| pmu_regs: syscon@402b0000 { |
| compatible = "sprd,sc9863a-glbregs", "syscon", |
| "simple-mfd"; |
| reg = <0 0x402b0000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0x402b0000 0x4000>; |
| |
| pmu_gate: pmu-gate { |
| compatible = "sprd,sc9863a-pmu-gate"; |
| reg = <0 0x1200>; |
| clocks = <&ext_26m>; |
| clock-names = "ext-26m"; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| aon_apb_regs: syscon@402e0000 { |
| compatible = "sprd,sc9863a-glbregs", "syscon", |
| "simple-mfd"; |
| reg = <0 0x402e0000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0x402e0000 0x4000>; |
| |
| aonapb_gate: aonapb-gate { |
| compatible = "sprd,sc9863a-aonapb-gate"; |
| reg = <0 0x1100>; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| anlg_phy_g2_regs: syscon@40353000 { |
| compatible = "sprd,sc9863a-glbregs", "syscon", |
| "simple-mfd"; |
| reg = <0 0x40353000 0 0x3000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0x40353000 0x3000>; |
| |
| pll: pll { |
| compatible = "sprd,sc9863a-pll"; |
| reg = <0 0x100>; |
| clocks = <&ext_26m>; |
| clock-names = "ext-26m"; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| anlg_phy_g4_regs: syscon@40359000 { |
| compatible = "sprd,sc9863a-glbregs", "syscon", |
| "simple-mfd"; |
| reg = <0 0x40359000 0 0x3000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0x40359000 0x3000>; |
| |
| mpll: mpll { |
| compatible = "sprd,sc9863a-mpll"; |
| reg = <0 0x100>; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| anlg_phy_g5_regs: syscon@4035c000 { |
| compatible = "sprd,sc9863a-glbregs", "syscon", |
| "simple-mfd"; |
| reg = <0 0x4035c000 0 0x3000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0x4035c000 0x3000>; |
| |
| rpll: rpll { |
| compatible = "sprd,sc9863a-rpll"; |
| reg = <0 0x100>; |
| clocks = <&ext_26m>; |
| clock-names = "ext-26m"; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| anlg_phy_g7_regs: syscon@40363000 { |
| compatible = "sprd,sc9863a-glbregs", "syscon", |
| "simple-mfd"; |
| reg = <0 0x40363000 0 0x3000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0x40363000 0x3000>; |
| |
| dpll: dpll { |
| compatible = "sprd,sc9863a-dpll"; |
| reg = <0 0x100>; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| mm_ahb_regs: syscon@60800000 { |
| compatible = "sprd,sc9863a-glbregs", "syscon", |
| "simple-mfd"; |
| reg = <0 0x60800000 0 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0x60800000 0x3000>; |
| |
| mm_gate: mm-gate { |
| compatible = "sprd,sc9863a-mm-gate"; |
| reg = <0 0x1100>; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| ap_apb_regs: syscon@71300000 { |
| compatible = "sprd,sc9863a-glbregs", "syscon", |
| "simple-mfd"; |
| reg = <0 0x71300000 0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0x71300000 0x4000>; |
| |
| apapb_gate: apapb-gate { |
| compatible = "sprd,sc9863a-apapb-gate"; |
| reg = <0 0x1000>; |
| clocks = <&ext_26m>; |
| clock-names = "ext-26m"; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| apb@70000000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x0 0x70000000 0x10000000>; |
| |
| uart0: serial@0 { |
| compatible = "sprd,sc9863a-uart", |
| "sprd,sc9836-uart"; |
| reg = <0x0 0x100>; |
| interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ext_26m>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@100000 { |
| compatible = "sprd,sc9863a-uart", |
| "sprd,sc9836-uart"; |
| reg = <0x100000 0x100>; |
| interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ext_26m>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@200000 { |
| compatible = "sprd,sc9863a-uart", |
| "sprd,sc9836-uart"; |
| reg = <0x200000 0x100>; |
| interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ext_26m>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@300000 { |
| compatible = "sprd,sc9863a-uart", |
| "sprd,sc9836-uart"; |
| reg = <0x300000 0x100>; |
| interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ext_26m>; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@400000 { |
| compatible = "sprd,sc9863a-uart", |
| "sprd,sc9836-uart"; |
| reg = <0x400000 0x100>; |
| interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ext_26m>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| ext_26m: ext-26m { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <26000000>; |
| clock-output-names = "ext-26m"; |
| }; |
| |
| ext_32k: ext-32k { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| clock-output-names = "ext-32k"; |
| }; |
| |
| ext_4m: ext-4m { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <4000000>; |
| clock-output-names = "ext-4m"; |
| }; |
| |
| rco_100m: rco-100m { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <100000000>; |
| clock-output-names = "rco-100m"; |
| }; |
| }; |