blob: e241914a967774ffcbc620885b6b7e6d63f9b2da [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
* Copyright (C) 2013 Red Hat
* Author: Rob Clark <robdclark@gmail.com>
*/
#ifndef __DPU_ENCODER_H__
#define __DPU_ENCODER_H__
#include <drm/drm_crtc.h>
#include "dpu_hw_mdss.h"
#define DPU_ENCODER_FRAME_EVENT_DONE BIT(0)
#define DPU_ENCODER_FRAME_EVENT_ERROR BIT(1)
#define DPU_ENCODER_FRAME_EVENT_PANEL_DEAD BIT(2)
#define DPU_ENCODER_FRAME_EVENT_IDLE BIT(3)
#define IDLE_TIMEOUT (66 - 16/2)
/**
* Encoder functions and data types
* @intfs: Interfaces this encoder is using, INTF_MODE_NONE if unused
*/
struct dpu_encoder_hw_resources {
enum dpu_intf_mode intfs[INTF_MAX];
};
/**
* dpu_encoder_get_hw_resources - Populate table of required hardware resources
* @encoder: encoder pointer
* @hw_res: resource table to populate with encoder required resources
*/
void dpu_encoder_get_hw_resources(struct drm_encoder *encoder,
struct dpu_encoder_hw_resources *hw_res);
/**
* dpu_encoder_assign_crtc - Link the encoder to the crtc it's assigned to
* @encoder: encoder pointer
* @crtc: crtc pointer
*/
void dpu_encoder_assign_crtc(struct drm_encoder *encoder,
struct drm_crtc *crtc);
/**
* dpu_encoder_toggle_vblank_for_crtc - Toggles vblank interrupts on or off if
* the encoder is assigned to the given crtc
* @encoder: encoder pointer
* @crtc: crtc pointer
* @enable: true if vblank should be enabled
*/
void dpu_encoder_toggle_vblank_for_crtc(struct drm_encoder *encoder,
struct drm_crtc *crtc, bool enable);
/**
* dpu_encoder_register_frame_event_callback - provide callback to encoder that
* will be called after the request is complete, or other events.
* @encoder: encoder pointer
* @cb: callback pointer, provide NULL to deregister
* @data: user data provided to callback
*/
void dpu_encoder_register_frame_event_callback(struct drm_encoder *encoder,
void (*cb)(void *, u32), void *data);
/**
* dpu_encoder_prepare_for_kickoff - schedule double buffer flip of the ctl
* path (i.e. ctl flush and start) at next appropriate time.
* Immediately: if no previous commit is outstanding.
* Delayed: Block until next trigger can be issued.
* @encoder: encoder pointer
*/
void dpu_encoder_prepare_for_kickoff(struct drm_encoder *encoder);
/**
* dpu_encoder_trigger_kickoff_pending - Clear the flush bits from previous
* kickoff and trigger the ctl prepare progress for command mode display.
* @encoder: encoder pointer
*/
void dpu_encoder_trigger_kickoff_pending(struct drm_encoder *encoder);
/**
* dpu_encoder_kickoff - trigger a double buffer flip of the ctl path
* (i.e. ctl flush and start) immediately.
* @encoder: encoder pointer
*/
void dpu_encoder_kickoff(struct drm_encoder *encoder);
/**
* dpu_encoder_wakeup_time - get the time of the next vsync
*/
int dpu_encoder_vsync_time(struct drm_encoder *drm_enc, ktime_t *wakeup_time);
/**
* dpu_encoder_wait_for_event - Waits for encoder events
* @encoder: encoder pointer
* @event: event to wait for
* MSM_ENC_COMMIT_DONE - Wait for hardware to have flushed the current pending
* frames to hardware at a vblank or ctl_start
* Encoders will map this differently depending on the
* panel type.
* vid mode -> vsync_irq
* cmd mode -> ctl_start
* MSM_ENC_TX_COMPLETE - Wait for the hardware to transfer all the pixels to
* the panel. Encoders will map this differently
* depending on the panel type.
* vid mode -> vsync_irq
* cmd mode -> pp_done
* Returns: 0 on success, -EWOULDBLOCK if already signaled, error otherwise
*/
int dpu_encoder_wait_for_event(struct drm_encoder *drm_encoder,
enum msm_event_wait event);
/*
* dpu_encoder_get_intf_mode - get interface mode of the given encoder
* @encoder: Pointer to drm encoder object
*/
enum dpu_intf_mode dpu_encoder_get_intf_mode(struct drm_encoder *encoder);
/**
* dpu_encoder_virt_runtime_resume - pm runtime resume the encoder configs
* @encoder: encoder pointer
*/
void dpu_encoder_virt_runtime_resume(struct drm_encoder *encoder);
/**
* dpu_encoder_init - initialize virtual encoder object
* @dev: Pointer to drm device structure
* @disp_info: Pointer to display information structure
* Returns: Pointer to newly created drm encoder
*/
struct drm_encoder *dpu_encoder_init(
struct drm_device *dev,
int drm_enc_mode);
/**
* dpu_encoder_setup - setup dpu_encoder for the display probed
* @dev: Pointer to drm device structure
* @enc: Pointer to the drm_encoder
* @disp_info: Pointer to the display info
*/
int dpu_encoder_setup(struct drm_device *dev, struct drm_encoder *enc,
struct msm_display_info *disp_info);
/**
* dpu_encoder_prepare_commit - prepare encoder at the very beginning of an
* atomic commit, before any registers are written
* @drm_enc: Pointer to previously created drm encoder structure
*/
void dpu_encoder_prepare_commit(struct drm_encoder *drm_enc);
/**
* dpu_encoder_set_idle_timeout - set the idle timeout for video
* and command mode encoders.
* @drm_enc: Pointer to previously created drm encoder structure
* @idle_timeout: idle timeout duration in milliseconds
*/
void dpu_encoder_set_idle_timeout(struct drm_encoder *drm_enc,
u32 idle_timeout);
/**
* dpu_encoder_get_linecount - get interface line count for the encoder.
* @drm_enc: Pointer to previously created drm encoder structure
*/
int dpu_encoder_get_linecount(struct drm_encoder *drm_enc);
/**
* dpu_encoder_get_vsync_count - get vsync count for the encoder.
* @drm_enc: Pointer to previously created drm encoder structure
*/
int dpu_encoder_get_vsync_count(struct drm_encoder *drm_enc);
#endif /* __DPU_ENCODER_H__ */