blob: 030f997eccd00d258f40d5ea535a6ab2da29c629 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2009 Nokia Corporation
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
*
* Some code and ideas taken from drivers/video/omap/ driver
* by Imre Deak.
*/
#define DSS_SUBSYS_NAME "DPI"
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/string.h>
#include <linux/sys_soc.h>
#include <drm/drm_bridge.h>
#include "dss.h"
#include "omapdss.h"
struct dpi_data {
struct platform_device *pdev;
enum dss_model dss_model;
struct dss_device *dss;
unsigned int id;
struct regulator *vdds_dsi_reg;
enum dss_clk_source clk_src;
struct dss_pll *pll;
struct dss_lcd_mgr_config mgr_config;
unsigned long pixelclock;
int data_lines;
struct omap_dss_device output;
struct drm_bridge bridge;
};
#define drm_bridge_to_dpi(bridge) container_of(bridge, struct dpi_data, bridge)
/* -----------------------------------------------------------------------------
* Clock Handling and PLL
*/
static enum dss_clk_source dpi_get_clk_src_dra7xx(struct dpi_data *dpi,
enum omap_channel channel)
{
/*
* Possible clock sources:
* LCD1: FCK/PLL1_1/HDMI_PLL
* LCD2: FCK/PLL1_3/HDMI_PLL (DRA74x: PLL2_3)
* LCD3: FCK/PLL1_3/HDMI_PLL (DRA74x: PLL2_1)
*/
switch (channel) {
case OMAP_DSS_CHANNEL_LCD:
{
if (dss_pll_find_by_src(dpi->dss, DSS_CLK_SRC_PLL1_1))
return DSS_CLK_SRC_PLL1_1;
break;
}
case OMAP_DSS_CHANNEL_LCD2:
{
if (dss_pll_find_by_src(dpi->dss, DSS_CLK_SRC_PLL1_3))
return DSS_CLK_SRC_PLL1_3;
if (dss_pll_find_by_src(dpi->dss, DSS_CLK_SRC_PLL2_3))
return DSS_CLK_SRC_PLL2_3;
break;
}
case OMAP_DSS_CHANNEL_LCD3:
{
if (dss_pll_find_by_src(dpi->dss, DSS_CLK_SRC_PLL2_1))
return DSS_CLK_SRC_PLL2_1;
if (dss_pll_find_by_src(dpi->dss, DSS_CLK_SRC_PLL1_3))
return DSS_CLK_SRC_PLL1_3;
break;
}
default:
break;
}
return DSS_CLK_SRC_FCK;
}
static enum dss_clk_source dpi_get_clk_src(struct dpi_data *dpi)
{
enum omap_channel channel = dpi->output.dispc_channel;
/*
* XXX we can't currently use DSI PLL for DPI with OMAP3, as the DSI PLL
* would also be used for DISPC fclk. Meaning, when the DPI output is
* disabled, DISPC clock will be disabled, and TV out will stop.
*/
switch (dpi->dss_model) {
case DSS_MODEL_OMAP2:
case DSS_MODEL_OMAP3:
return DSS_CLK_SRC_FCK;
case DSS_MODEL_OMAP4:
switch (channel) {
case OMAP_DSS_CHANNEL_LCD:
return DSS_CLK_SRC_PLL1_1;
case OMAP_DSS_CHANNEL_LCD2:
return DSS_CLK_SRC_PLL2_1;
default:
return DSS_CLK_SRC_FCK;
}
case DSS_MODEL_OMAP5:
switch (channel) {
case OMAP_DSS_CHANNEL_LCD:
return DSS_CLK_SRC_PLL1_1;
case OMAP_DSS_CHANNEL_LCD3:
return DSS_CLK_SRC_PLL2_1;
case OMAP_DSS_CHANNEL_LCD2:
default:
return DSS_CLK_SRC_FCK;
}
case DSS_MODEL_DRA7:
return dpi_get_clk_src_dra7xx(dpi, channel);
default:
return DSS_CLK_SRC_FCK;
}
}
struct dpi_clk_calc_ctx {
struct dpi_data *dpi;
unsigned int clkout_idx;
/* inputs */
unsigned long pck_min, pck_max;
/* outputs */
struct dss_pll_clock_info pll_cinfo;
unsigned long fck;
struct dispc_clock_info dispc_cinfo;
};
static bool dpi_calc_dispc_cb(int lckd, int pckd, unsigned long lck,
unsigned long pck, void *data)
{
struct dpi_clk_calc_ctx *ctx = data;
/*
* Odd dividers give us uneven duty cycle, causing problem when level
* shifted. So skip all odd dividers when the pixel clock is on the
* higher side.
*/
if (ctx->pck_min >= 100000000) {
if (lckd > 1 && lckd % 2 != 0)
return false;
if (pckd > 1 && pckd % 2 != 0)
return false;
}
ctx->dispc_cinfo.lck_div = lckd;
ctx->dispc_cinfo.pck_div = pckd;
ctx->dispc_cinfo.lck = lck;
ctx->dispc_cinfo.pck = pck;
return true;
}
static bool dpi_calc_hsdiv_cb(int m_dispc, unsigned long dispc,
void *data)
{
struct dpi_clk_calc_ctx *ctx = data;
ctx->pll_cinfo.mX[ctx->clkout_idx] = m_dispc;
ctx->pll_cinfo.clkout[ctx->clkout_idx] = dispc;
return dispc_div_calc(ctx->dpi->dss->dispc, dispc,
ctx->pck_min, ctx->pck_max,
dpi_calc_dispc_cb, ctx);
}
static bool dpi_calc_pll_cb(int n, int m, unsigned long fint,
unsigned long clkdco,
void *data)
{
struct dpi_clk_calc_ctx *ctx = data;
ctx->pll_cinfo.n = n;
ctx->pll_cinfo.m = m;
ctx->pll_cinfo.fint = fint;
ctx->pll_cinfo.clkdco = clkdco;
return dss_pll_hsdiv_calc_a(ctx->dpi->pll, clkdco,
ctx->pck_min, dss_get_max_fck_rate(ctx->dpi->dss),
dpi_calc_hsdiv_cb, ctx);
}
static bool dpi_calc_dss_cb(unsigned long fck, void *data)
{
struct dpi_clk_calc_ctx *ctx = data;
ctx->fck = fck;
return dispc_div_calc(ctx->dpi->dss->dispc, fck,
ctx->pck_min, ctx->pck_max,
dpi_calc_dispc_cb, ctx);
}
static bool dpi_pll_clk_calc(struct dpi_data *dpi, unsigned long pck,
struct dpi_clk_calc_ctx *ctx)
{
unsigned long clkin;
memset(ctx, 0, sizeof(*ctx));
ctx->dpi = dpi;
ctx->clkout_idx = dss_pll_get_clkout_idx_for_src(dpi->clk_src);
clkin = clk_get_rate(dpi->pll->clkin);
if (dpi->pll->hw->type == DSS_PLL_TYPE_A) {
unsigned long pll_min, pll_max;
ctx->pck_min = pck - 1000;
ctx->pck_max = pck + 1000;
pll_min = 0;
pll_max = 0;
return dss_pll_calc_a(ctx->dpi->pll, clkin,
pll_min, pll_max,
dpi_calc_pll_cb, ctx);
} else { /* DSS_PLL_TYPE_B */
dss_pll_calc_b(dpi->pll, clkin, pck, &ctx->pll_cinfo);
ctx->dispc_cinfo.lck_div = 1;
ctx->dispc_cinfo.pck_div = 1;
ctx->dispc_cinfo.lck = ctx->pll_cinfo.clkout[0];
ctx->dispc_cinfo.pck = ctx->dispc_cinfo.lck;
return true;
}
}
static bool dpi_dss_clk_calc(struct dpi_data *dpi, unsigned long pck,
struct dpi_clk_calc_ctx *ctx)
{
int i;
/*
* DSS fck gives us very few possibilities, so finding a good pixel
* clock may not be possible. We try multiple times to find the clock,
* each time widening the pixel clock range we look for, up to
* +/- ~15MHz.
*/
for (i = 0; i < 25; ++i) {
bool ok;
memset(ctx, 0, sizeof(*ctx));
ctx->dpi = dpi;
if (pck > 1000 * i * i * i)
ctx->pck_min = max(pck - 1000 * i * i * i, 0lu);
else
ctx->pck_min = 0;
ctx->pck_max = pck + 1000 * i * i * i;
ok = dss_div_calc(dpi->dss, pck, ctx->pck_min,
dpi_calc_dss_cb, ctx);
if (ok)
return ok;
}
return false;
}
static int dpi_set_pll_clk(struct dpi_data *dpi, unsigned long pck_req)
{
struct dpi_clk_calc_ctx ctx;
int r;
bool ok;
ok = dpi_pll_clk_calc(dpi, pck_req, &ctx);
if (!ok)
return -EINVAL;
r = dss_pll_set_config(dpi->pll, &ctx.pll_cinfo);
if (r)
return r;
dss_select_lcd_clk_source(dpi->dss, dpi->output.dispc_channel,
dpi->clk_src);
dpi->mgr_config.clock_info = ctx.dispc_cinfo;
return 0;
}
static int dpi_set_dispc_clk(struct dpi_data *dpi, unsigned long pck_req)
{
struct dpi_clk_calc_ctx ctx;
int r;
bool ok;
ok = dpi_dss_clk_calc(dpi, pck_req, &ctx);
if (!ok)
return -EINVAL;
r = dss_set_fck_rate(dpi->dss, ctx.fck);
if (r)
return r;
dpi->mgr_config.clock_info = ctx.dispc_cinfo;
return 0;
}
static int dpi_set_mode(struct dpi_data *dpi)
{
int r;
if (dpi->pll)
r = dpi_set_pll_clk(dpi, dpi->pixelclock);
else
r = dpi_set_dispc_clk(dpi, dpi->pixelclock);
return r;
}
static void dpi_config_lcd_manager(struct dpi_data *dpi)
{
dpi->mgr_config.io_pad_mode = DSS_IO_PAD_MODE_BYPASS;
dpi->mgr_config.stallmode = false;
dpi->mgr_config.fifohandcheck = false;
dpi->mgr_config.video_port_width = dpi->data_lines;
dpi->mgr_config.lcden_sig_polarity = 0;
dss_mgr_set_lcd_config(&dpi->output, &dpi->mgr_config);
}
static int dpi_clock_update(struct dpi_data *dpi, unsigned long *clock)
{
int lck_div, pck_div;
unsigned long fck;
struct dpi_clk_calc_ctx ctx;
if (dpi->pll) {
if (!dpi_pll_clk_calc(dpi, *clock, &ctx))
return -EINVAL;
fck = ctx.pll_cinfo.clkout[ctx.clkout_idx];
} else {
if (!dpi_dss_clk_calc(dpi, *clock, &ctx))
return -EINVAL;
fck = ctx.fck;
}
lck_div = ctx.dispc_cinfo.lck_div;
pck_div = ctx.dispc_cinfo.pck_div;
*clock = fck / lck_div / pck_div;
return 0;
}
static int dpi_verify_pll(struct dss_pll *pll)
{
int r;
/* do initial setup with the PLL to see if it is operational */
r = dss_pll_enable(pll);
if (r)
return r;
dss_pll_disable(pll);
return 0;
}
static void dpi_init_pll(struct dpi_data *dpi)
{
struct dss_pll *pll;
if (dpi->pll)
return;
dpi->clk_src = dpi_get_clk_src(dpi);
pll = dss_pll_find_by_src(dpi->dss, dpi->clk_src);
if (!pll)
return;
if (dpi_verify_pll(pll)) {
DSSWARN("PLL not operational\n");
return;
}
dpi->pll = pll;
}
/* -----------------------------------------------------------------------------
* DRM Bridge Operations
*/
static int dpi_bridge_attach(struct drm_bridge *bridge,
enum drm_bridge_attach_flags flags)
{
struct dpi_data *dpi = drm_bridge_to_dpi(bridge);
if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR))
return -EINVAL;
dpi_init_pll(dpi);
return drm_bridge_attach(bridge->encoder, dpi->output.next_bridge,
bridge, flags);
}
static enum drm_mode_status
dpi_bridge_mode_valid(struct drm_bridge *bridge,
const struct drm_display_info *info,
const struct drm_display_mode *mode)
{
struct dpi_data *dpi = drm_bridge_to_dpi(bridge);
unsigned long clock = mode->clock * 1000;
int ret;
if (mode->hdisplay % 8 != 0)
return MODE_BAD_WIDTH;
if (mode->clock == 0)
return MODE_NOCLOCK;
ret = dpi_clock_update(dpi, &clock);
if (ret < 0)
return MODE_CLOCK_RANGE;
return MODE_OK;
}
static bool dpi_bridge_mode_fixup(struct drm_bridge *bridge,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct dpi_data *dpi = drm_bridge_to_dpi(bridge);
unsigned long clock = mode->clock * 1000;
int ret;
ret = dpi_clock_update(dpi, &clock);
if (ret < 0)
return false;
adjusted_mode->clock = clock / 1000;
return true;
}
static void dpi_bridge_mode_set(struct drm_bridge *bridge,
const struct drm_display_mode *mode,
const struct drm_display_mode *adjusted_mode)
{
struct dpi_data *dpi = drm_bridge_to_dpi(bridge);
dpi->pixelclock = adjusted_mode->clock * 1000;
}
static void dpi_bridge_enable(struct drm_bridge *bridge)
{
struct dpi_data *dpi = drm_bridge_to_dpi(bridge);
int r;
if (dpi->vdds_dsi_reg) {
r = regulator_enable(dpi->vdds_dsi_reg);
if (r)
return;
}
r = dispc_runtime_get(dpi->dss->dispc);
if (r)
goto err_get_dispc;
r = dss_dpi_select_source(dpi->dss, dpi->id, dpi->output.dispc_channel);
if (r)
goto err_src_sel;
if (dpi->pll) {
r = dss_pll_enable(dpi->pll);
if (r)
goto err_pll_init;
}
r = dpi_set_mode(dpi);
if (r)
goto err_set_mode;
dpi_config_lcd_manager(dpi);
mdelay(2);
r = dss_mgr_enable(&dpi->output);
if (r)
goto err_mgr_enable;
return;
err_mgr_enable:
err_set_mode:
if (dpi->pll)
dss_pll_disable(dpi->pll);
err_pll_init:
err_src_sel:
dispc_runtime_put(dpi->dss->dispc);
err_get_dispc:
if (dpi->vdds_dsi_reg)
regulator_disable(dpi->vdds_dsi_reg);
}
static void dpi_bridge_disable(struct drm_bridge *bridge)
{
struct dpi_data *dpi = drm_bridge_to_dpi(bridge);
dss_mgr_disable(&dpi->output);
if (dpi->pll) {
dss_select_lcd_clk_source(dpi->dss, dpi->output.dispc_channel,
DSS_CLK_SRC_FCK);
dss_pll_disable(dpi->pll);
}
dispc_runtime_put(dpi->dss->dispc);
if (dpi->vdds_dsi_reg)
regulator_disable(dpi->vdds_dsi_reg);
}
static const struct drm_bridge_funcs dpi_bridge_funcs = {
.attach = dpi_bridge_attach,
.mode_valid = dpi_bridge_mode_valid,
.mode_fixup = dpi_bridge_mode_fixup,
.mode_set = dpi_bridge_mode_set,
.enable = dpi_bridge_enable,
.disable = dpi_bridge_disable,
};
static void dpi_bridge_init(struct dpi_data *dpi)
{
dpi->bridge.funcs = &dpi_bridge_funcs;
dpi->bridge.of_node = dpi->pdev->dev.of_node;
dpi->bridge.type = DRM_MODE_CONNECTOR_DPI;
drm_bridge_add(&dpi->bridge);
}
static void dpi_bridge_cleanup(struct dpi_data *dpi)
{
drm_bridge_remove(&dpi->bridge);
}
/* -----------------------------------------------------------------------------
* Initialisation and Cleanup
*/
/*
* Return a hardcoded channel for the DPI output. This should work for
* current use cases, but this can be later expanded to either resolve
* the channel in some more dynamic manner, or get the channel as a user
* parameter.
*/
static enum omap_channel dpi_get_channel(struct dpi_data *dpi)
{
switch (dpi->dss_model) {
case DSS_MODEL_OMAP2:
case DSS_MODEL_OMAP3:
return OMAP_DSS_CHANNEL_LCD;
case DSS_MODEL_DRA7:
switch (dpi->id) {
case 2:
return OMAP_DSS_CHANNEL_LCD3;
case 1:
return OMAP_DSS_CHANNEL_LCD2;
case 0:
default:
return OMAP_DSS_CHANNEL_LCD;
}
case DSS_MODEL_OMAP4:
return OMAP_DSS_CHANNEL_LCD2;
case DSS_MODEL_OMAP5:
return OMAP_DSS_CHANNEL_LCD3;
default:
DSSWARN("unsupported DSS version\n");
return OMAP_DSS_CHANNEL_LCD;
}
}
static int dpi_init_output_port(struct dpi_data *dpi, struct device_node *port)
{
struct omap_dss_device *out = &dpi->output;
u32 port_num = 0;
int r;
dpi_bridge_init(dpi);
of_property_read_u32(port, "reg", &port_num);
dpi->id = port_num <= 2 ? port_num : 0;
switch (port_num) {
case 2:
out->name = "dpi.2";
break;
case 1:
out->name = "dpi.1";
break;
case 0:
default:
out->name = "dpi.0";
break;
}
out->dev = &dpi->pdev->dev;
out->id = OMAP_DSS_OUTPUT_DPI;
out->type = OMAP_DISPLAY_TYPE_DPI;
out->dispc_channel = dpi_get_channel(dpi);
out->of_port = port_num;
r = omapdss_device_init_output(out, &dpi->bridge);
if (r < 0) {
dpi_bridge_cleanup(dpi);
return r;
}
omapdss_device_register(out);
return 0;
}
static void dpi_uninit_output_port(struct device_node *port)
{
struct dpi_data *dpi = port->data;
struct omap_dss_device *out = &dpi->output;
omapdss_device_unregister(out);
omapdss_device_cleanup_output(out);
dpi_bridge_cleanup(dpi);
}
/* -----------------------------------------------------------------------------
* Initialisation and Cleanup
*/
static const struct soc_device_attribute dpi_soc_devices[] = {
{ .machine = "OMAP3[456]*" },
{ .machine = "[AD]M37*" },
{ /* sentinel */ }
};
static int dpi_init_regulator(struct dpi_data *dpi)
{
struct regulator *vdds_dsi;
/*
* The DPI uses the DSI VDDS on OMAP34xx, OMAP35xx, OMAP36xx, AM37xx and
* DM37xx only.
*/
if (!soc_device_match(dpi_soc_devices))
return 0;
vdds_dsi = devm_regulator_get(&dpi->pdev->dev, "vdds_dsi");
if (IS_ERR(vdds_dsi)) {
if (PTR_ERR(vdds_dsi) != -EPROBE_DEFER)
DSSERR("can't get VDDS_DSI regulator\n");
return PTR_ERR(vdds_dsi);
}
dpi->vdds_dsi_reg = vdds_dsi;
return 0;
}
int dpi_init_port(struct dss_device *dss, struct platform_device *pdev,
struct device_node *port, enum dss_model dss_model)
{
struct dpi_data *dpi;
struct device_node *ep;
u32 datalines;
int r;
dpi = devm_kzalloc(&pdev->dev, sizeof(*dpi), GFP_KERNEL);
if (!dpi)
return -ENOMEM;
ep = of_get_next_child(port, NULL);
if (!ep)
return 0;
r = of_property_read_u32(ep, "data-lines", &datalines);
of_node_put(ep);
if (r) {
DSSERR("failed to parse datalines\n");
return r;
}
dpi->data_lines = datalines;
dpi->pdev = pdev;
dpi->dss_model = dss_model;
dpi->dss = dss;
port->data = dpi;
r = dpi_init_regulator(dpi);
if (r)
return r;
return dpi_init_output_port(dpi, port);
}
void dpi_uninit_port(struct device_node *port)
{
struct dpi_data *dpi = port->data;
if (!dpi)
return;
dpi_uninit_output_port(port);
}