| /* |
| * Copyright (C) 2010 Bluecherry, LLC www.bluecherrydvr.com |
| * Copyright (C) 2010 Ben Collins <bcollins@bluecherry.net> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| /* XXX: The SOLO6x10 i2c does not have separate interrupts for each i2c |
| * channel. The bus can only handle one i2c event at a time. The below handles |
| * this all wrong. We should be using the status registers to see if the bus |
| * is in use, and have a global lock to check the status register. Also, |
| * the bulk of the work should be handled out-of-interrupt. The ugly loops |
| * that occur during interrupt scare me. The ISR should merely signal |
| * thread context, ACK the interrupt, and move on. -- BenC */ |
| |
| #include <linux/kernel.h> |
| #include "solo6x10.h" |
| |
| u8 solo_i2c_readbyte(struct solo_dev *solo_dev, int id, u8 addr, u8 off) |
| { |
| struct i2c_msg msgs[2]; |
| u8 data; |
| |
| msgs[0].flags = 0; |
| msgs[0].addr = addr; |
| msgs[0].len = 1; |
| msgs[0].buf = &off; |
| |
| msgs[1].flags = I2C_M_RD; |
| msgs[1].addr = addr; |
| msgs[1].len = 1; |
| msgs[1].buf = &data; |
| |
| i2c_transfer(&solo_dev->i2c_adap[id], msgs, 2); |
| |
| return data; |
| } |
| |
| void solo_i2c_writebyte(struct solo_dev *solo_dev, int id, u8 addr, |
| u8 off, u8 data) |
| { |
| struct i2c_msg msgs; |
| u8 buf[2]; |
| |
| buf[0] = off; |
| buf[1] = data; |
| msgs.flags = 0; |
| msgs.addr = addr; |
| msgs.len = 2; |
| msgs.buf = buf; |
| |
| i2c_transfer(&solo_dev->i2c_adap[id], &msgs, 1); |
| } |
| |
| static void solo_i2c_flush(struct solo_dev *solo_dev, int wr) |
| { |
| u32 ctrl; |
| |
| ctrl = SOLO_IIC_CH_SET(solo_dev->i2c_id); |
| |
| if (solo_dev->i2c_state == IIC_STATE_START) |
| ctrl |= SOLO_IIC_START; |
| |
| if (wr) { |
| ctrl |= SOLO_IIC_WRITE; |
| } else { |
| ctrl |= SOLO_IIC_READ; |
| if (!(solo_dev->i2c_msg->flags & I2C_M_NO_RD_ACK)) |
| ctrl |= SOLO_IIC_ACK_EN; |
| } |
| |
| if (solo_dev->i2c_msg_ptr == solo_dev->i2c_msg->len) |
| ctrl |= SOLO_IIC_STOP; |
| |
| solo_reg_write(solo_dev, SOLO_IIC_CTRL, ctrl); |
| } |
| |
| static void solo_i2c_start(struct solo_dev *solo_dev) |
| { |
| u32 addr = solo_dev->i2c_msg->addr << 1; |
| |
| if (solo_dev->i2c_msg->flags & I2C_M_RD) |
| addr |= 1; |
| |
| solo_dev->i2c_state = IIC_STATE_START; |
| solo_reg_write(solo_dev, SOLO_IIC_TXD, addr); |
| solo_i2c_flush(solo_dev, 1); |
| } |
| |
| static void solo_i2c_stop(struct solo_dev *solo_dev) |
| { |
| solo_irq_off(solo_dev, SOLO_IRQ_IIC); |
| solo_reg_write(solo_dev, SOLO_IIC_CTRL, 0); |
| solo_dev->i2c_state = IIC_STATE_STOP; |
| wake_up(&solo_dev->i2c_wait); |
| } |
| |
| static int solo_i2c_handle_read(struct solo_dev *solo_dev) |
| { |
| prepare_read: |
| if (solo_dev->i2c_msg_ptr != solo_dev->i2c_msg->len) { |
| solo_i2c_flush(solo_dev, 0); |
| return 0; |
| } |
| |
| solo_dev->i2c_msg_ptr = 0; |
| solo_dev->i2c_msg++; |
| solo_dev->i2c_msg_num--; |
| |
| if (solo_dev->i2c_msg_num == 0) { |
| solo_i2c_stop(solo_dev); |
| return 0; |
| } |
| |
| if (!(solo_dev->i2c_msg->flags & I2C_M_NOSTART)) { |
| solo_i2c_start(solo_dev); |
| } else { |
| if (solo_dev->i2c_msg->flags & I2C_M_RD) |
| goto prepare_read; |
| else |
| solo_i2c_stop(solo_dev); |
| } |
| |
| return 0; |
| } |
| |
| static int solo_i2c_handle_write(struct solo_dev *solo_dev) |
| { |
| retry_write: |
| if (solo_dev->i2c_msg_ptr != solo_dev->i2c_msg->len) { |
| solo_reg_write(solo_dev, SOLO_IIC_TXD, |
| solo_dev->i2c_msg->buf[solo_dev->i2c_msg_ptr]); |
| solo_dev->i2c_msg_ptr++; |
| solo_i2c_flush(solo_dev, 1); |
| return 0; |
| } |
| |
| solo_dev->i2c_msg_ptr = 0; |
| solo_dev->i2c_msg++; |
| solo_dev->i2c_msg_num--; |
| |
| if (solo_dev->i2c_msg_num == 0) { |
| solo_i2c_stop(solo_dev); |
| return 0; |
| } |
| |
| if (!(solo_dev->i2c_msg->flags & I2C_M_NOSTART)) { |
| solo_i2c_start(solo_dev); |
| } else { |
| if (solo_dev->i2c_msg->flags & I2C_M_RD) |
| solo_i2c_stop(solo_dev); |
| else |
| goto retry_write; |
| } |
| |
| return 0; |
| } |
| |
| int solo_i2c_isr(struct solo_dev *solo_dev) |
| { |
| u32 status = solo_reg_read(solo_dev, SOLO_IIC_CTRL); |
| int ret = -EINVAL; |
| |
| solo_reg_write(solo_dev, SOLO_IRQ_STAT, SOLO_IRQ_IIC); |
| |
| if (status & (SOLO_IIC_STATE_TRNS & SOLO_IIC_STATE_SIG_ERR) || |
| solo_dev->i2c_id < 0) { |
| solo_i2c_stop(solo_dev); |
| return -ENXIO; |
| } |
| |
| switch (solo_dev->i2c_state) { |
| case IIC_STATE_START: |
| if (solo_dev->i2c_msg->flags & I2C_M_RD) { |
| solo_dev->i2c_state = IIC_STATE_READ; |
| ret = solo_i2c_handle_read(solo_dev); |
| break; |
| } |
| |
| solo_dev->i2c_state = IIC_STATE_WRITE; |
| case IIC_STATE_WRITE: |
| ret = solo_i2c_handle_write(solo_dev); |
| break; |
| |
| case IIC_STATE_READ: |
| solo_dev->i2c_msg->buf[solo_dev->i2c_msg_ptr] = |
| solo_reg_read(solo_dev, SOLO_IIC_RXD); |
| solo_dev->i2c_msg_ptr++; |
| |
| ret = solo_i2c_handle_read(solo_dev); |
| break; |
| |
| default: |
| solo_i2c_stop(solo_dev); |
| } |
| |
| return ret; |
| } |
| |
| static int solo_i2c_master_xfer(struct i2c_adapter *adap, |
| struct i2c_msg msgs[], int num) |
| { |
| struct solo_dev *solo_dev = adap->algo_data; |
| unsigned long timeout; |
| int ret; |
| int i; |
| DEFINE_WAIT(wait); |
| |
| for (i = 0; i < SOLO_I2C_ADAPTERS; i++) { |
| if (&solo_dev->i2c_adap[i] == adap) |
| break; |
| } |
| |
| if (i == SOLO_I2C_ADAPTERS) |
| return num; /* XXX Right return value for failure? */ |
| |
| mutex_lock(&solo_dev->i2c_mutex); |
| solo_dev->i2c_id = i; |
| solo_dev->i2c_msg = msgs; |
| solo_dev->i2c_msg_num = num; |
| solo_dev->i2c_msg_ptr = 0; |
| |
| solo_reg_write(solo_dev, SOLO_IIC_CTRL, 0); |
| solo_irq_on(solo_dev, SOLO_IRQ_IIC); |
| solo_i2c_start(solo_dev); |
| |
| timeout = HZ / 2; |
| |
| for (;;) { |
| prepare_to_wait(&solo_dev->i2c_wait, &wait, TASK_INTERRUPTIBLE); |
| |
| if (solo_dev->i2c_state == IIC_STATE_STOP) |
| break; |
| |
| timeout = schedule_timeout(timeout); |
| if (!timeout) |
| break; |
| |
| if (signal_pending(current)) |
| break; |
| } |
| |
| finish_wait(&solo_dev->i2c_wait, &wait); |
| ret = num - solo_dev->i2c_msg_num; |
| solo_dev->i2c_state = IIC_STATE_IDLE; |
| solo_dev->i2c_id = -1; |
| |
| mutex_unlock(&solo_dev->i2c_mutex); |
| |
| return ret; |
| } |
| |
| static u32 solo_i2c_functionality(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_I2C; |
| } |
| |
| static struct i2c_algorithm solo_i2c_algo = { |
| .master_xfer = solo_i2c_master_xfer, |
| .functionality = solo_i2c_functionality, |
| }; |
| |
| int solo_i2c_init(struct solo_dev *solo_dev) |
| { |
| int i; |
| int ret; |
| |
| solo_reg_write(solo_dev, SOLO_IIC_CFG, |
| SOLO_IIC_PRESCALE(8) | SOLO_IIC_ENABLE); |
| |
| solo_dev->i2c_id = -1; |
| solo_dev->i2c_state = IIC_STATE_IDLE; |
| init_waitqueue_head(&solo_dev->i2c_wait); |
| mutex_init(&solo_dev->i2c_mutex); |
| |
| for (i = 0; i < SOLO_I2C_ADAPTERS; i++) { |
| struct i2c_adapter *adap = &solo_dev->i2c_adap[i]; |
| |
| snprintf(adap->name, I2C_NAME_SIZE, "%s I2C %d", SOLO6X10_NAME, i); |
| adap->algo = &solo_i2c_algo; |
| adap->algo_data = solo_dev; |
| adap->retries = 1; |
| adap->dev.parent = &solo_dev->pdev->dev; |
| |
| ret = i2c_add_adapter(adap); |
| if (ret) { |
| adap->algo_data = NULL; |
| break; |
| } |
| } |
| |
| if (ret) { |
| for (i = 0; i < SOLO_I2C_ADAPTERS; i++) { |
| if (!solo_dev->i2c_adap[i].algo_data) |
| break; |
| i2c_del_adapter(&solo_dev->i2c_adap[i]); |
| solo_dev->i2c_adap[i].algo_data = NULL; |
| } |
| return ret; |
| } |
| |
| dev_info(&solo_dev->pdev->dev, "Enabled %d i2c adapters\n", |
| SOLO_I2C_ADAPTERS); |
| |
| return 0; |
| } |
| |
| void solo_i2c_exit(struct solo_dev *solo_dev) |
| { |
| int i; |
| |
| for (i = 0; i < SOLO_I2C_ADAPTERS; i++) { |
| if (!solo_dev->i2c_adap[i].algo_data) |
| continue; |
| i2c_del_adapter(&solo_dev->i2c_adap[i]); |
| solo_dev->i2c_adap[i].algo_data = NULL; |
| } |
| } |