| /* |
| * OMAP clkctrl clock support |
| * |
| * Copyright (C) 2017 Texas Instruments, Inc. |
| * |
| * Tero Kristo <t-kristo@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed "as is" WITHOUT ANY WARRANTY of any |
| * kind, whether express or implied; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/slab.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/clk/ti.h> |
| #include <linux/delay.h> |
| #include <linux/timekeeping.h> |
| #include "clock.h" |
| |
| #define NO_IDLEST 0x1 |
| |
| #define OMAP4_MODULEMODE_MASK 0x3 |
| |
| #define MODULEMODE_HWCTRL 0x1 |
| #define MODULEMODE_SWCTRL 0x2 |
| |
| #define OMAP4_IDLEST_MASK (0x3 << 16) |
| #define OMAP4_IDLEST_SHIFT 16 |
| |
| #define CLKCTRL_IDLEST_FUNCTIONAL 0x0 |
| #define CLKCTRL_IDLEST_INTERFACE_IDLE 0x2 |
| #define CLKCTRL_IDLEST_DISABLED 0x3 |
| |
| /* These timeouts are in us */ |
| #define OMAP4_MAX_MODULE_READY_TIME 2000 |
| #define OMAP4_MAX_MODULE_DISABLE_TIME 5000 |
| |
| static bool _early_timeout = true; |
| |
| struct omap_clkctrl_provider { |
| void __iomem *base; |
| struct list_head clocks; |
| char *clkdm_name; |
| }; |
| |
| struct omap_clkctrl_clk { |
| struct clk_hw *clk; |
| u16 reg_offset; |
| int bit_offset; |
| struct list_head node; |
| }; |
| |
| union omap4_timeout { |
| u32 cycles; |
| ktime_t start; |
| }; |
| |
| static const struct omap_clkctrl_data default_clkctrl_data[] __initconst = { |
| { 0 }, |
| }; |
| |
| static u32 _omap4_idlest(u32 val) |
| { |
| val &= OMAP4_IDLEST_MASK; |
| val >>= OMAP4_IDLEST_SHIFT; |
| |
| return val; |
| } |
| |
| static bool _omap4_is_idle(u32 val) |
| { |
| val = _omap4_idlest(val); |
| |
| return val == CLKCTRL_IDLEST_DISABLED; |
| } |
| |
| static bool _omap4_is_ready(u32 val) |
| { |
| val = _omap4_idlest(val); |
| |
| return val == CLKCTRL_IDLEST_FUNCTIONAL || |
| val == CLKCTRL_IDLEST_INTERFACE_IDLE; |
| } |
| |
| static bool _omap4_is_timeout(union omap4_timeout *time, u32 timeout) |
| { |
| /* |
| * There are two special cases where ktime_to_ns() can't be |
| * used to track the timeouts. First one is during early boot |
| * when the timers haven't been initialized yet. The second |
| * one is during suspend-resume cycle while timekeeping is |
| * being suspended / resumed. Clocksource for the system |
| * can be from a timer that requires pm_runtime access, which |
| * will eventually bring us here with timekeeping_suspended, |
| * during both suspend entry and resume paths. This happens |
| * at least on am43xx platform. |
| */ |
| if (unlikely(_early_timeout || timekeeping_suspended)) { |
| if (time->cycles++ < timeout) { |
| udelay(1); |
| return false; |
| } |
| } else { |
| if (!ktime_to_ns(time->start)) { |
| time->start = ktime_get(); |
| return false; |
| } |
| |
| if (ktime_us_delta(ktime_get(), time->start) < timeout) { |
| cpu_relax(); |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| static int __init _omap4_disable_early_timeout(void) |
| { |
| _early_timeout = false; |
| |
| return 0; |
| } |
| arch_initcall(_omap4_disable_early_timeout); |
| |
| static int _omap4_clkctrl_clk_enable(struct clk_hw *hw) |
| { |
| struct clk_hw_omap *clk = to_clk_hw_omap(hw); |
| u32 val; |
| int ret; |
| union omap4_timeout timeout = { 0 }; |
| |
| if (clk->clkdm) { |
| ret = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk); |
| if (ret) { |
| WARN(1, |
| "%s: could not enable %s's clockdomain %s: %d\n", |
| __func__, clk_hw_get_name(hw), |
| clk->clkdm_name, ret); |
| return ret; |
| } |
| } |
| |
| if (!clk->enable_bit) |
| return 0; |
| |
| val = ti_clk_ll_ops->clk_readl(&clk->enable_reg); |
| |
| val &= ~OMAP4_MODULEMODE_MASK; |
| val |= clk->enable_bit; |
| |
| ti_clk_ll_ops->clk_writel(val, &clk->enable_reg); |
| |
| if (clk->flags & NO_IDLEST) |
| return 0; |
| |
| /* Wait until module is enabled */ |
| while (!_omap4_is_ready(ti_clk_ll_ops->clk_readl(&clk->enable_reg))) { |
| if (_omap4_is_timeout(&timeout, OMAP4_MAX_MODULE_READY_TIME)) { |
| pr_err("%s: failed to enable\n", clk_hw_get_name(hw)); |
| return -EBUSY; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void _omap4_clkctrl_clk_disable(struct clk_hw *hw) |
| { |
| struct clk_hw_omap *clk = to_clk_hw_omap(hw); |
| u32 val; |
| union omap4_timeout timeout = { 0 }; |
| |
| if (!clk->enable_bit) |
| goto exit; |
| |
| val = ti_clk_ll_ops->clk_readl(&clk->enable_reg); |
| |
| val &= ~OMAP4_MODULEMODE_MASK; |
| |
| ti_clk_ll_ops->clk_writel(val, &clk->enable_reg); |
| |
| if (clk->flags & NO_IDLEST) |
| goto exit; |
| |
| /* Wait until module is disabled */ |
| while (!_omap4_is_idle(ti_clk_ll_ops->clk_readl(&clk->enable_reg))) { |
| if (_omap4_is_timeout(&timeout, |
| OMAP4_MAX_MODULE_DISABLE_TIME)) { |
| pr_err("%s: failed to disable\n", clk_hw_get_name(hw)); |
| break; |
| } |
| } |
| |
| exit: |
| if (clk->clkdm) |
| ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk); |
| } |
| |
| static int _omap4_clkctrl_clk_is_enabled(struct clk_hw *hw) |
| { |
| struct clk_hw_omap *clk = to_clk_hw_omap(hw); |
| u32 val; |
| |
| val = ti_clk_ll_ops->clk_readl(&clk->enable_reg); |
| |
| if (val & clk->enable_bit) |
| return 1; |
| |
| return 0; |
| } |
| |
| static const struct clk_ops omap4_clkctrl_clk_ops = { |
| .enable = _omap4_clkctrl_clk_enable, |
| .disable = _omap4_clkctrl_clk_disable, |
| .is_enabled = _omap4_clkctrl_clk_is_enabled, |
| .init = omap2_init_clk_clkdm, |
| }; |
| |
| static struct clk_hw *_ti_omap4_clkctrl_xlate(struct of_phandle_args *clkspec, |
| void *data) |
| { |
| struct omap_clkctrl_provider *provider = data; |
| struct omap_clkctrl_clk *entry; |
| |
| if (clkspec->args_count != 2) |
| return ERR_PTR(-EINVAL); |
| |
| pr_debug("%s: looking for %x:%x\n", __func__, |
| clkspec->args[0], clkspec->args[1]); |
| |
| list_for_each_entry(entry, &provider->clocks, node) { |
| if (entry->reg_offset == clkspec->args[0] && |
| entry->bit_offset == clkspec->args[1]) |
| break; |
| } |
| |
| if (!entry) |
| return ERR_PTR(-EINVAL); |
| |
| return entry->clk; |
| } |
| |
| static int __init |
| _ti_clkctrl_clk_register(struct omap_clkctrl_provider *provider, |
| struct device_node *node, struct clk_hw *clk_hw, |
| u16 offset, u8 bit, const char * const *parents, |
| int num_parents, const struct clk_ops *ops) |
| { |
| struct clk_init_data init = { NULL }; |
| struct clk *clk; |
| struct omap_clkctrl_clk *clkctrl_clk; |
| int ret = 0; |
| |
| if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) |
| init.name = kasprintf(GFP_KERNEL, "%pOFn:%pOFn:%04x:%d", |
| node->parent, node, offset, |
| bit); |
| else |
| init.name = kasprintf(GFP_KERNEL, "%pOFn:%04x:%d", node, |
| offset, bit); |
| clkctrl_clk = kzalloc(sizeof(*clkctrl_clk), GFP_KERNEL); |
| if (!init.name || !clkctrl_clk) { |
| ret = -ENOMEM; |
| goto cleanup; |
| } |
| |
| clk_hw->init = &init; |
| init.parent_names = parents; |
| init.num_parents = num_parents; |
| init.ops = ops; |
| init.flags = 0; |
| |
| clk = ti_clk_register(NULL, clk_hw, init.name); |
| if (IS_ERR_OR_NULL(clk)) { |
| ret = -EINVAL; |
| goto cleanup; |
| } |
| |
| clkctrl_clk->reg_offset = offset; |
| clkctrl_clk->bit_offset = bit; |
| clkctrl_clk->clk = clk_hw; |
| |
| list_add(&clkctrl_clk->node, &provider->clocks); |
| |
| return 0; |
| |
| cleanup: |
| kfree(init.name); |
| kfree(clkctrl_clk); |
| return ret; |
| } |
| |
| static void __init |
| _ti_clkctrl_setup_gate(struct omap_clkctrl_provider *provider, |
| struct device_node *node, u16 offset, |
| const struct omap_clkctrl_bit_data *data, |
| void __iomem *reg) |
| { |
| struct clk_hw_omap *clk_hw; |
| |
| clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); |
| if (!clk_hw) |
| return; |
| |
| clk_hw->enable_bit = data->bit; |
| clk_hw->enable_reg.ptr = reg; |
| |
| if (_ti_clkctrl_clk_register(provider, node, &clk_hw->hw, offset, |
| data->bit, data->parents, 1, |
| &omap_gate_clk_ops)) |
| kfree(clk_hw); |
| } |
| |
| static void __init |
| _ti_clkctrl_setup_mux(struct omap_clkctrl_provider *provider, |
| struct device_node *node, u16 offset, |
| const struct omap_clkctrl_bit_data *data, |
| void __iomem *reg) |
| { |
| struct clk_omap_mux *mux; |
| int num_parents = 0; |
| const char * const *pname; |
| |
| mux = kzalloc(sizeof(*mux), GFP_KERNEL); |
| if (!mux) |
| return; |
| |
| pname = data->parents; |
| while (*pname) { |
| num_parents++; |
| pname++; |
| } |
| |
| mux->mask = num_parents; |
| if (!(mux->flags & CLK_MUX_INDEX_ONE)) |
| mux->mask--; |
| |
| mux->mask = (1 << fls(mux->mask)) - 1; |
| |
| mux->shift = data->bit; |
| mux->reg.ptr = reg; |
| |
| if (_ti_clkctrl_clk_register(provider, node, &mux->hw, offset, |
| data->bit, data->parents, num_parents, |
| &ti_clk_mux_ops)) |
| kfree(mux); |
| } |
| |
| static void __init |
| _ti_clkctrl_setup_div(struct omap_clkctrl_provider *provider, |
| struct device_node *node, u16 offset, |
| const struct omap_clkctrl_bit_data *data, |
| void __iomem *reg) |
| { |
| struct clk_omap_divider *div; |
| const struct omap_clkctrl_div_data *div_data = data->data; |
| u8 div_flags = 0; |
| |
| div = kzalloc(sizeof(*div), GFP_KERNEL); |
| if (!div) |
| return; |
| |
| div->reg.ptr = reg; |
| div->shift = data->bit; |
| div->flags = div_data->flags; |
| |
| if (div->flags & CLK_DIVIDER_POWER_OF_TWO) |
| div_flags |= CLKF_INDEX_POWER_OF_TWO; |
| |
| if (ti_clk_parse_divider_data((int *)div_data->dividers, 0, |
| div_data->max_div, div_flags, |
| &div->width, &div->table)) { |
| pr_err("%s: Data parsing for %pOF:%04x:%d failed\n", __func__, |
| node, offset, data->bit); |
| kfree(div); |
| return; |
| } |
| |
| if (_ti_clkctrl_clk_register(provider, node, &div->hw, offset, |
| data->bit, data->parents, 1, |
| &ti_clk_divider_ops)) |
| kfree(div); |
| } |
| |
| static void __init |
| _ti_clkctrl_setup_subclks(struct omap_clkctrl_provider *provider, |
| struct device_node *node, |
| const struct omap_clkctrl_reg_data *data, |
| void __iomem *reg) |
| { |
| const struct omap_clkctrl_bit_data *bits = data->bit_data; |
| |
| if (!bits) |
| return; |
| |
| while (bits->bit) { |
| switch (bits->type) { |
| case TI_CLK_GATE: |
| _ti_clkctrl_setup_gate(provider, node, data->offset, |
| bits, reg); |
| break; |
| |
| case TI_CLK_DIVIDER: |
| _ti_clkctrl_setup_div(provider, node, data->offset, |
| bits, reg); |
| break; |
| |
| case TI_CLK_MUX: |
| _ti_clkctrl_setup_mux(provider, node, data->offset, |
| bits, reg); |
| break; |
| |
| default: |
| pr_err("%s: bad subclk type: %d\n", __func__, |
| bits->type); |
| return; |
| } |
| bits++; |
| } |
| } |
| |
| static void __init _clkctrl_add_provider(void *data, |
| struct device_node *np) |
| { |
| of_clk_add_hw_provider(np, _ti_omap4_clkctrl_xlate, data); |
| } |
| |
| static void __init _ti_omap4_clkctrl_setup(struct device_node *node) |
| { |
| struct omap_clkctrl_provider *provider; |
| const struct omap_clkctrl_data *data = default_clkctrl_data; |
| const struct omap_clkctrl_reg_data *reg_data; |
| struct clk_init_data init = { NULL }; |
| struct clk_hw_omap *hw; |
| struct clk *clk; |
| struct omap_clkctrl_clk *clkctrl_clk; |
| const __be32 *addrp; |
| u32 addr; |
| int ret; |
| char *c; |
| u16 soc_mask = 0; |
| |
| if (!(ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) && |
| of_node_name_eq(node, "clk")) |
| ti_clk_features.flags |= TI_CLK_CLKCTRL_COMPAT; |
| |
| addrp = of_get_address(node, 0, NULL, NULL); |
| addr = (u32)of_translate_address(node, addrp); |
| |
| #ifdef CONFIG_ARCH_OMAP4 |
| if (of_machine_is_compatible("ti,omap4")) |
| data = omap4_clkctrl_data; |
| #endif |
| #ifdef CONFIG_SOC_OMAP5 |
| if (of_machine_is_compatible("ti,omap5")) |
| data = omap5_clkctrl_data; |
| #endif |
| #ifdef CONFIG_SOC_DRA7XX |
| if (of_machine_is_compatible("ti,dra7")) { |
| if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) |
| data = dra7_clkctrl_compat_data; |
| else |
| data = dra7_clkctrl_data; |
| } |
| |
| if (of_machine_is_compatible("ti,dra72")) |
| soc_mask = CLKF_SOC_DRA72; |
| if (of_machine_is_compatible("ti,dra74")) |
| soc_mask = CLKF_SOC_DRA74; |
| if (of_machine_is_compatible("ti,dra76")) |
| soc_mask = CLKF_SOC_DRA76; |
| #endif |
| #ifdef CONFIG_SOC_AM33XX |
| if (of_machine_is_compatible("ti,am33xx")) { |
| if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) |
| data = am3_clkctrl_compat_data; |
| else |
| data = am3_clkctrl_data; |
| } |
| #endif |
| #ifdef CONFIG_SOC_AM43XX |
| if (of_machine_is_compatible("ti,am4372")) { |
| if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) |
| data = am4_clkctrl_compat_data; |
| else |
| data = am4_clkctrl_data; |
| } |
| |
| if (of_machine_is_compatible("ti,am438x")) { |
| if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) |
| data = am438x_clkctrl_compat_data; |
| else |
| data = am438x_clkctrl_data; |
| } |
| #endif |
| #ifdef CONFIG_SOC_TI81XX |
| if (of_machine_is_compatible("ti,dm814")) |
| data = dm814_clkctrl_data; |
| |
| if (of_machine_is_compatible("ti,dm816")) |
| data = dm816_clkctrl_data; |
| #endif |
| |
| if (ti_clk_get_features()->flags & TI_CLK_DEVICE_TYPE_GP) |
| soc_mask |= CLKF_SOC_NONSEC; |
| |
| while (data->addr) { |
| if (addr == data->addr) |
| break; |
| |
| data++; |
| } |
| |
| if (!data->addr) { |
| pr_err("%pOF not found from clkctrl data.\n", node); |
| return; |
| } |
| |
| provider = kzalloc(sizeof(*provider), GFP_KERNEL); |
| if (!provider) |
| return; |
| |
| provider->base = of_iomap(node, 0); |
| |
| if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) { |
| provider->clkdm_name = kasprintf(GFP_KERNEL, "%pOFnxxx", node->parent); |
| if (!provider->clkdm_name) { |
| kfree(provider); |
| return; |
| } |
| |
| /* |
| * Create default clkdm name, replace _cm from end of parent |
| * node name with _clkdm |
| */ |
| provider->clkdm_name[strlen(provider->clkdm_name) - 2] = 0; |
| } else { |
| provider->clkdm_name = kasprintf(GFP_KERNEL, "%pOFn", node); |
| if (!provider->clkdm_name) { |
| kfree(provider); |
| return; |
| } |
| |
| /* |
| * Create default clkdm name, replace _clkctrl from end of |
| * node name with _clkdm |
| */ |
| provider->clkdm_name[strlen(provider->clkdm_name) - 7] = 0; |
| } |
| |
| strcat(provider->clkdm_name, "clkdm"); |
| |
| /* Replace any dash from the clkdm name with underscore */ |
| c = provider->clkdm_name; |
| |
| while (*c) { |
| if (*c == '-') |
| *c = '_'; |
| c++; |
| } |
| |
| INIT_LIST_HEAD(&provider->clocks); |
| |
| /* Generate clocks */ |
| reg_data = data->regs; |
| |
| while (reg_data->parent) { |
| if ((reg_data->flags & CLKF_SOC_MASK) && |
| (reg_data->flags & soc_mask) == 0) { |
| reg_data++; |
| continue; |
| } |
| |
| hw = kzalloc(sizeof(*hw), GFP_KERNEL); |
| if (!hw) |
| return; |
| |
| hw->enable_reg.ptr = provider->base + reg_data->offset; |
| |
| _ti_clkctrl_setup_subclks(provider, node, reg_data, |
| hw->enable_reg.ptr); |
| |
| if (reg_data->flags & CLKF_SW_SUP) |
| hw->enable_bit = MODULEMODE_SWCTRL; |
| if (reg_data->flags & CLKF_HW_SUP) |
| hw->enable_bit = MODULEMODE_HWCTRL; |
| if (reg_data->flags & CLKF_NO_IDLEST) |
| hw->flags |= NO_IDLEST; |
| |
| if (reg_data->clkdm_name) |
| hw->clkdm_name = reg_data->clkdm_name; |
| else |
| hw->clkdm_name = provider->clkdm_name; |
| |
| init.parent_names = ®_data->parent; |
| init.num_parents = 1; |
| init.flags = 0; |
| if (reg_data->flags & CLKF_SET_RATE_PARENT) |
| init.flags |= CLK_SET_RATE_PARENT; |
| if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) |
| init.name = kasprintf(GFP_KERNEL, "%pOFn:%pOFn:%04x:%d", |
| node->parent, node, |
| reg_data->offset, 0); |
| else |
| init.name = kasprintf(GFP_KERNEL, "%pOFn:%04x:%d", |
| node, reg_data->offset, 0); |
| clkctrl_clk = kzalloc(sizeof(*clkctrl_clk), GFP_KERNEL); |
| if (!init.name || !clkctrl_clk) |
| goto cleanup; |
| |
| init.ops = &omap4_clkctrl_clk_ops; |
| hw->hw.init = &init; |
| |
| clk = ti_clk_register(NULL, &hw->hw, init.name); |
| if (IS_ERR_OR_NULL(clk)) |
| goto cleanup; |
| |
| clkctrl_clk->reg_offset = reg_data->offset; |
| clkctrl_clk->clk = &hw->hw; |
| |
| list_add(&clkctrl_clk->node, &provider->clocks); |
| |
| reg_data++; |
| } |
| |
| ret = of_clk_add_hw_provider(node, _ti_omap4_clkctrl_xlate, provider); |
| if (ret == -EPROBE_DEFER) |
| ti_clk_retry_init(node, provider, _clkctrl_add_provider); |
| |
| return; |
| |
| cleanup: |
| kfree(hw); |
| kfree(init.name); |
| kfree(clkctrl_clk); |
| } |
| CLK_OF_DECLARE(ti_omap4_clkctrl_clock, "ti,clkctrl", |
| _ti_omap4_clkctrl_setup); |