| /* |
| * mac80211_hwsim - software simulator of 802.11 radio(s) for mac80211 |
| * Copyright (c) 2008, Jouni Malinen <j@w1.fi> |
| * Copyright (c) 2011, Javier Lopez <jlopex@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #ifndef __MAC80211_HWSIM_H |
| #define __MAC80211_HWSIM_H |
| |
| /** |
| * enum hwsim_tx_control_flags - flags to describe transmission info/status |
| * |
| * These flags are used to give the wmediumd extra information in order to |
| * modify its behavior for each frame |
| * |
| * @HWSIM_TX_CTL_REQ_TX_STATUS: require TX status callback for this frame. |
| * @HWSIM_TX_CTL_NO_ACK: tell the wmediumd not to wait for an ack |
| * @HWSIM_TX_STAT_ACK: Frame was acknowledged |
| * |
| */ |
| enum hwsim_tx_control_flags { |
| HWSIM_TX_CTL_REQ_TX_STATUS = BIT(0), |
| HWSIM_TX_CTL_NO_ACK = BIT(1), |
| HWSIM_TX_STAT_ACK = BIT(2), |
| }; |
| |
| /** |
| * DOC: Frame transmission/registration support |
| * |
| * Frame transmission and registration support exists to allow userspace |
| * entities such as wmediumd to receive and process all broadcasted |
| * frames from a mac80211_hwsim radio device. |
| * |
| * This allow user space applications to decide if the frame should be |
| * dropped or not and implement a wireless medium simulator at user space. |
| * |
| * Registration is done by sending a register message to the driver and |
| * will be automatically unregistered if the user application doesn't |
| * responds to sent frames. |
| * Once registered the user application has to take responsibility of |
| * broadcasting the frames to all listening mac80211_hwsim radio |
| * interfaces. |
| * |
| * For more technical details, see the corresponding command descriptions |
| * below. |
| */ |
| |
| /** |
| * enum hwsim_commands - supported hwsim commands |
| * |
| * @HWSIM_CMD_UNSPEC: unspecified command to catch errors |
| * |
| * @HWSIM_CMD_REGISTER: request to register and received all broadcasted |
| * frames by any mac80211_hwsim radio device. |
| * @HWSIM_CMD_FRAME: send/receive a broadcasted frame from/to kernel/user |
| * space, uses: |
| * %HWSIM_ATTR_ADDR_TRANSMITTER, %HWSIM_ATTR_ADDR_RECEIVER, |
| * %HWSIM_ATTR_FRAME, %HWSIM_ATTR_FLAGS, %HWSIM_ATTR_RX_RATE, |
| * %HWSIM_ATTR_SIGNAL, %HWSIM_ATTR_COOKIE |
| * @HWSIM_CMD_TX_INFO_FRAME: Transmission info report from user space to |
| * kernel, uses: |
| * %HWSIM_ATTR_ADDR_TRANSMITTER, %HWSIM_ATTR_FLAGS, |
| * %HWSIM_ATTR_TX_INFO, %HWSIM_ATTR_SIGNAL, %HWSIM_ATTR_COOKIE |
| * @HWSIM_CMD_CREATE_RADIO: create a new radio with the given parameters, |
| * returns the radio ID (>= 0) or negative on errors |
| * @HWSIM_CMD_DESTROY_RADIO: destroy a radio |
| * @__HWSIM_CMD_MAX: enum limit |
| */ |
| enum { |
| HWSIM_CMD_UNSPEC, |
| HWSIM_CMD_REGISTER, |
| HWSIM_CMD_FRAME, |
| HWSIM_CMD_TX_INFO_FRAME, |
| HWSIM_CMD_CREATE_RADIO, |
| HWSIM_CMD_DESTROY_RADIO, |
| __HWSIM_CMD_MAX, |
| }; |
| #define HWSIM_CMD_MAX (_HWSIM_CMD_MAX - 1) |
| |
| /** |
| * enum hwsim_attrs - hwsim netlink attributes |
| * |
| * @HWSIM_ATTR_UNSPEC: unspecified attribute to catch errors |
| * |
| * @HWSIM_ATTR_ADDR_RECEIVER: MAC address of the radio device that |
| * the frame is broadcasted to |
| * @HWSIM_ATTR_ADDR_TRANSMITTER: MAC address of the radio device that |
| * the frame was broadcasted from |
| * @HWSIM_ATTR_FRAME: Data array |
| * @HWSIM_ATTR_FLAGS: mac80211 transmission flags, used to process |
| properly the frame at user space |
| * @HWSIM_ATTR_RX_RATE: estimated rx rate index for this frame at user |
| space |
| * @HWSIM_ATTR_SIGNAL: estimated RX signal for this frame at user |
| space |
| * @HWSIM_ATTR_TX_INFO: ieee80211_tx_rate array |
| * @HWSIM_ATTR_COOKIE: sk_buff cookie to identify the frame |
| * @HWSIM_ATTR_CHANNELS: u32 attribute used with the %HWSIM_CMD_CREATE_RADIO |
| * command giving the number of channels supported by the new radio |
| * @HWSIM_ATTR_RADIO_ID: u32 attribute used with %HWSIM_CMD_DESTROY_RADIO |
| * only to destroy a radio |
| * @HWSIM_ATTR_REG_HINT_ALPHA2: alpha2 for regulatoro driver hint |
| * (nla string, length 2) |
| * @HWSIM_ATTR_REG_CUSTOM_REG: custom regulatory domain index (u32 attribute) |
| * @HWSIM_ATTR_REG_STRICT_REG: request REGULATORY_STRICT_REG (flag attribute) |
| * @__HWSIM_ATTR_MAX: enum limit |
| */ |
| |
| |
| enum { |
| HWSIM_ATTR_UNSPEC, |
| HWSIM_ATTR_ADDR_RECEIVER, |
| HWSIM_ATTR_ADDR_TRANSMITTER, |
| HWSIM_ATTR_FRAME, |
| HWSIM_ATTR_FLAGS, |
| HWSIM_ATTR_RX_RATE, |
| HWSIM_ATTR_SIGNAL, |
| HWSIM_ATTR_TX_INFO, |
| HWSIM_ATTR_COOKIE, |
| HWSIM_ATTR_CHANNELS, |
| HWSIM_ATTR_RADIO_ID, |
| HWSIM_ATTR_REG_HINT_ALPHA2, |
| HWSIM_ATTR_REG_CUSTOM_REG, |
| HWSIM_ATTR_REG_STRICT_REG, |
| __HWSIM_ATTR_MAX, |
| }; |
| #define HWSIM_ATTR_MAX (__HWSIM_ATTR_MAX - 1) |
| |
| /** |
| * struct hwsim_tx_rate - rate selection/status |
| * |
| * @idx: rate index to attempt to send with |
| * @count: number of tries in this rate before going to the next rate |
| * |
| * A value of -1 for @idx indicates an invalid rate and, if used |
| * in an array of retry rates, that no more rates should be tried. |
| * |
| * When used for transmit status reporting, the driver should |
| * always report the rate and number of retries used. |
| * |
| */ |
| struct hwsim_tx_rate { |
| s8 idx; |
| u8 count; |
| } __packed; |
| |
| #endif /* __MAC80211_HWSIM_H */ |
