blob: 7de696eefaed4b25f773fbe06f77510bd4bddb8c [file] [log] [blame]
Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
Required properties:
- compatible: value should be one of the following:
"atmel,at91sam9n12-hlcdc"
"atmel,at91sam9x5-hlcdc"
"atmel,sama5d2-hlcdc"
"atmel,sama5d3-hlcdc"
"atmel,sama5d4-hlcdc"
"microchip,sam9x60-hlcdc"
"microchip,sam9x75-xlcdc"
- reg: base address and size of the HLCDC device registers.
- clock-names: the name of the 3 clocks requested by the HLCDC device.
Should contain "periph_clk", "sys_clk" and "slow_clk".
- clocks: should contain the 3 clocks requested by the HLCDC device.
- interrupts: should contain the description of the HLCDC interrupt line
The HLCDC IP exposes two subdevices:
- a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt
- a Display Controller: see ../display/atmel/hlcdc-dc.txt
Example:
hlcdc: hlcdc@f0030000 {
compatible = "atmel,sama5d3-hlcdc";
reg = <0xf0030000 0x2000>;
clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
clock-names = "periph_clk","sys_clk", "slow_clk";
interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
hlcdc-display-controller {
compatible = "atmel,hlcdc-display-controller";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
#address-cells = <1>;
#size-cells = <0>;
port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
hlcdc_panel_output: endpoint@0 {
reg = <0>;
remote-endpoint = <&panel_input>;
};
};
};
hlcdc_pwm: hlcdc-pwm {
compatible = "atmel,hlcdc-pwm";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd_pwm>;
#pwm-cells = <3>;
};
};