blob: 3376e58e2b88e58d2a9b17a018c58c5d4a9f6956 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/* Framework for configuring and reading PHY devices
* Based on code in sungem_phy.c and gianfar_phy.c
*
* Author: Andy Fleming
*
* Copyright (c) 2004 Freescale Semiconductor, Inc.
* Copyright (c) 2006, 2007 Maciej W. Rozycki
*/
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/netlink.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/ethtool_netlink.h>
#include <linux/phy.h>
#include <linux/phy_led_triggers.h>
#include <linux/sfp.h>
#include <linux/workqueue.h>
#include <linux/mdio.h>
#include <linux/io.h>
#include <linux/uaccess.h>
#include <linux/atomic.h>
#include <linux/suspend.h>
#include <net/netlink.h>
#include <net/genetlink.h>
#include <net/sock.h>
#define PHY_STATE_TIME HZ
#define PHY_STATE_STR(_state) \
case PHY_##_state: \
return __stringify(_state); \
static const char *phy_state_to_str(enum phy_state st)
{
switch (st) {
PHY_STATE_STR(DOWN)
PHY_STATE_STR(READY)
PHY_STATE_STR(UP)
PHY_STATE_STR(RUNNING)
PHY_STATE_STR(NOLINK)
PHY_STATE_STR(CABLETEST)
PHY_STATE_STR(HALTED)
PHY_STATE_STR(ERROR)
}
return NULL;
}
static void phy_process_state_change(struct phy_device *phydev,
enum phy_state old_state)
{
if (old_state != phydev->state) {
phydev_dbg(phydev, "PHY state change %s -> %s\n",
phy_state_to_str(old_state),
phy_state_to_str(phydev->state));
if (phydev->drv && phydev->drv->link_change_notify)
phydev->drv->link_change_notify(phydev);
}
}
static void phy_link_up(struct phy_device *phydev)
{
phydev->phy_link_change(phydev, true);
phy_led_trigger_change_speed(phydev);
}
static void phy_link_down(struct phy_device *phydev)
{
phydev->phy_link_change(phydev, false);
phy_led_trigger_change_speed(phydev);
WRITE_ONCE(phydev->link_down_events, phydev->link_down_events + 1);
}
static const char *phy_pause_str(struct phy_device *phydev)
{
bool local_pause, local_asym_pause;
if (phydev->autoneg == AUTONEG_DISABLE)
goto no_pause;
local_pause = linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
phydev->advertising);
local_asym_pause = linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
phydev->advertising);
if (local_pause && phydev->pause)
return "rx/tx";
if (local_asym_pause && phydev->asym_pause) {
if (local_pause)
return "rx";
if (phydev->pause)
return "tx";
}
no_pause:
return "off";
}
/**
* phy_print_status - Convenience function to print out the current phy status
* @phydev: the phy_device struct
*/
void phy_print_status(struct phy_device *phydev)
{
if (phydev->link) {
netdev_info(phydev->attached_dev,
"Link is Up - %s/%s %s- flow control %s\n",
phy_speed_to_str(phydev->speed),
phy_duplex_to_str(phydev->duplex),
phydev->downshifted_rate ? "(downshifted) " : "",
phy_pause_str(phydev));
} else {
netdev_info(phydev->attached_dev, "Link is Down\n");
}
}
EXPORT_SYMBOL(phy_print_status);
/**
* phy_get_rate_matching - determine if rate matching is supported
* @phydev: The phy device to return rate matching for
* @iface: The interface mode to use
*
* This determines the type of rate matching (if any) that @phy supports
* using @iface. @iface may be %PHY_INTERFACE_MODE_NA to determine if any
* interface supports rate matching.
*
* Return: The type of rate matching @phy supports for @iface, or
* %RATE_MATCH_NONE.
*/
int phy_get_rate_matching(struct phy_device *phydev,
phy_interface_t iface)
{
int ret = RATE_MATCH_NONE;
if (phydev->drv->get_rate_matching) {
mutex_lock(&phydev->lock);
ret = phydev->drv->get_rate_matching(phydev, iface);
mutex_unlock(&phydev->lock);
}
return ret;
}
EXPORT_SYMBOL_GPL(phy_get_rate_matching);
/**
* phy_config_interrupt - configure the PHY device for the requested interrupts
* @phydev: the phy_device struct
* @interrupts: interrupt flags to configure for this @phydev
*
* Returns 0 on success or < 0 on error.
*/
static int phy_config_interrupt(struct phy_device *phydev, bool interrupts)
{
phydev->interrupts = interrupts ? 1 : 0;
if (phydev->drv->config_intr)
return phydev->drv->config_intr(phydev);
return 0;
}
/**
* phy_restart_aneg - restart auto-negotiation
* @phydev: target phy_device struct
*
* Restart the autonegotiation on @phydev. Returns >= 0 on success or
* negative errno on error.
*/
int phy_restart_aneg(struct phy_device *phydev)
{
int ret;
if (phydev->is_c45 && !(phydev->c45_ids.devices_in_package & BIT(0)))
ret = genphy_c45_restart_aneg(phydev);
else
ret = genphy_restart_aneg(phydev);
return ret;
}
EXPORT_SYMBOL_GPL(phy_restart_aneg);
/**
* phy_aneg_done - return auto-negotiation status
* @phydev: target phy_device struct
*
* Description: Return the auto-negotiation status from this @phydev
* Returns > 0 on success or < 0 on error. 0 means that auto-negotiation
* is still pending.
*/
int phy_aneg_done(struct phy_device *phydev)
{
if (phydev->drv && phydev->drv->aneg_done)
return phydev->drv->aneg_done(phydev);
else if (phydev->is_c45)
return genphy_c45_aneg_done(phydev);
else
return genphy_aneg_done(phydev);
}
EXPORT_SYMBOL(phy_aneg_done);
/**
* phy_find_valid - find a PHY setting that matches the requested parameters
* @speed: desired speed
* @duplex: desired duplex
* @supported: mask of supported link modes
*
* Locate a supported phy setting that is, in priority order:
* - an exact match for the specified speed and duplex mode
* - a match for the specified speed, or slower speed
* - the slowest supported speed
* Returns the matched phy_setting entry, or %NULL if no supported phy
* settings were found.
*/
static const struct phy_setting *
phy_find_valid(int speed, int duplex, unsigned long *supported)
{
return phy_lookup_setting(speed, duplex, supported, false);
}
/**
* phy_supported_speeds - return all speeds currently supported by a phy device
* @phy: The phy device to return supported speeds of.
* @speeds: buffer to store supported speeds in.
* @size: size of speeds buffer.
*
* Description: Returns the number of supported speeds, and fills the speeds
* buffer with the supported speeds. If speeds buffer is too small to contain
* all currently supported speeds, will return as many speeds as can fit.
*/
unsigned int phy_supported_speeds(struct phy_device *phy,
unsigned int *speeds,
unsigned int size)
{
return phy_speeds(speeds, size, phy->supported);
}
/**
* phy_check_valid - check if there is a valid PHY setting which matches
* speed, duplex, and feature mask
* @speed: speed to match
* @duplex: duplex to match
* @features: A mask of the valid settings
*
* Description: Returns true if there is a valid setting, false otherwise.
*/
bool phy_check_valid(int speed, int duplex, unsigned long *features)
{
return !!phy_lookup_setting(speed, duplex, features, true);
}
EXPORT_SYMBOL(phy_check_valid);
/**
* phy_sanitize_settings - make sure the PHY is set to supported speed and duplex
* @phydev: the target phy_device struct
*
* Description: Make sure the PHY is set to supported speeds and
* duplexes. Drop down by one in this order: 1000/FULL,
* 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF.
*/
static void phy_sanitize_settings(struct phy_device *phydev)
{
const struct phy_setting *setting;
setting = phy_find_valid(phydev->speed, phydev->duplex,
phydev->supported);
if (setting) {
phydev->speed = setting->speed;
phydev->duplex = setting->duplex;
} else {
/* We failed to find anything (no supported speeds?) */
phydev->speed = SPEED_UNKNOWN;
phydev->duplex = DUPLEX_UNKNOWN;
}
}
void phy_ethtool_ksettings_get(struct phy_device *phydev,
struct ethtool_link_ksettings *cmd)
{
mutex_lock(&phydev->lock);
linkmode_copy(cmd->link_modes.supported, phydev->supported);
linkmode_copy(cmd->link_modes.advertising, phydev->advertising);
linkmode_copy(cmd->link_modes.lp_advertising, phydev->lp_advertising);
cmd->base.speed = phydev->speed;
cmd->base.duplex = phydev->duplex;
cmd->base.master_slave_cfg = phydev->master_slave_get;
cmd->base.master_slave_state = phydev->master_slave_state;
cmd->base.rate_matching = phydev->rate_matching;
if (phydev->interface == PHY_INTERFACE_MODE_MOCA)
cmd->base.port = PORT_BNC;
else
cmd->base.port = phydev->port;
cmd->base.transceiver = phy_is_internal(phydev) ?
XCVR_INTERNAL : XCVR_EXTERNAL;
cmd->base.phy_address = phydev->mdio.addr;
cmd->base.autoneg = phydev->autoneg;
cmd->base.eth_tp_mdix_ctrl = phydev->mdix_ctrl;
cmd->base.eth_tp_mdix = phydev->mdix;
mutex_unlock(&phydev->lock);
}
EXPORT_SYMBOL(phy_ethtool_ksettings_get);
/**
* phy_mii_ioctl - generic PHY MII ioctl interface
* @phydev: the phy_device struct
* @ifr: &struct ifreq for socket ioctl's
* @cmd: ioctl cmd to execute
*
* Note that this function is currently incompatible with the
* PHYCONTROL layer. It changes registers without regard to
* current state. Use at own risk.
*/
int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd)
{
struct mii_ioctl_data *mii_data = if_mii(ifr);
struct kernel_hwtstamp_config kernel_cfg;
struct netlink_ext_ack extack = {};
u16 val = mii_data->val_in;
bool change_autoneg = false;
struct hwtstamp_config cfg;
int prtad, devad;
int ret;
switch (cmd) {
case SIOCGMIIPHY:
mii_data->phy_id = phydev->mdio.addr;
fallthrough;
case SIOCGMIIREG:
if (mdio_phy_id_is_c45(mii_data->phy_id)) {
prtad = mdio_phy_id_prtad(mii_data->phy_id);
devad = mdio_phy_id_devad(mii_data->phy_id);
mii_data->val_out = mdiobus_c45_read(
phydev->mdio.bus, prtad, devad,
mii_data->reg_num);
} else {
mii_data->val_out = mdiobus_read(
phydev->mdio.bus, mii_data->phy_id,
mii_data->reg_num);
}
return 0;
case SIOCSMIIREG:
if (mdio_phy_id_is_c45(mii_data->phy_id)) {
prtad = mdio_phy_id_prtad(mii_data->phy_id);
devad = mdio_phy_id_devad(mii_data->phy_id);
} else {
prtad = mii_data->phy_id;
devad = mii_data->reg_num;
}
if (prtad == phydev->mdio.addr) {
switch (devad) {
case MII_BMCR:
if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0) {
if (phydev->autoneg == AUTONEG_ENABLE)
change_autoneg = true;
phydev->autoneg = AUTONEG_DISABLE;
if (val & BMCR_FULLDPLX)
phydev->duplex = DUPLEX_FULL;
else
phydev->duplex = DUPLEX_HALF;
if (val & BMCR_SPEED1000)
phydev->speed = SPEED_1000;
else if (val & BMCR_SPEED100)
phydev->speed = SPEED_100;
else phydev->speed = SPEED_10;
} else {
if (phydev->autoneg == AUTONEG_DISABLE)
change_autoneg = true;
phydev->autoneg = AUTONEG_ENABLE;
}
break;
case MII_ADVERTISE:
mii_adv_mod_linkmode_adv_t(phydev->advertising,
val);
change_autoneg = true;
break;
case MII_CTRL1000:
mii_ctrl1000_mod_linkmode_adv_t(phydev->advertising,
val);
change_autoneg = true;
break;
default:
/* do nothing */
break;
}
}
if (mdio_phy_id_is_c45(mii_data->phy_id))
mdiobus_c45_write(phydev->mdio.bus, prtad, devad,
mii_data->reg_num, val);
else
mdiobus_write(phydev->mdio.bus, prtad, devad, val);
if (prtad == phydev->mdio.addr &&
devad == MII_BMCR &&
val & BMCR_RESET)
return phy_init_hw(phydev);
if (change_autoneg)
return phy_start_aneg(phydev);
return 0;
case SIOCSHWTSTAMP:
if (phydev->mii_ts && phydev->mii_ts->hwtstamp) {
if (copy_from_user(&cfg, ifr->ifr_data, sizeof(cfg)))
return -EFAULT;
hwtstamp_config_to_kernel(&kernel_cfg, &cfg);
ret = phydev->mii_ts->hwtstamp(phydev->mii_ts, &kernel_cfg, &extack);
if (ret)
return ret;
hwtstamp_config_from_kernel(&cfg, &kernel_cfg);
if (copy_to_user(ifr->ifr_data, &cfg, sizeof(cfg)))
return -EFAULT;
return 0;
}
fallthrough;
default:
return -EOPNOTSUPP;
}
}
EXPORT_SYMBOL(phy_mii_ioctl);
/**
* phy_do_ioctl - generic ndo_eth_ioctl implementation
* @dev: the net_device struct
* @ifr: &struct ifreq for socket ioctl's
* @cmd: ioctl cmd to execute
*/
int phy_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
if (!dev->phydev)
return -ENODEV;
return phy_mii_ioctl(dev->phydev, ifr, cmd);
}
EXPORT_SYMBOL(phy_do_ioctl);
/**
* phy_do_ioctl_running - generic ndo_eth_ioctl implementation but test first
*
* @dev: the net_device struct
* @ifr: &struct ifreq for socket ioctl's
* @cmd: ioctl cmd to execute
*
* Same as phy_do_ioctl, but ensures that net_device is running before
* handling the ioctl.
*/
int phy_do_ioctl_running(struct net_device *dev, struct ifreq *ifr, int cmd)
{
if (!netif_running(dev))
return -ENODEV;
return phy_do_ioctl(dev, ifr, cmd);
}
EXPORT_SYMBOL(phy_do_ioctl_running);
/**
* __phy_hwtstamp_get - Get hardware timestamping configuration from PHY
*
* @phydev: the PHY device structure
* @config: structure holding the timestamping configuration
*
* Query the PHY device for its current hardware timestamping configuration.
*/
int __phy_hwtstamp_get(struct phy_device *phydev,
struct kernel_hwtstamp_config *config)
{
if (!phydev)
return -ENODEV;
return -EOPNOTSUPP;
}
/**
* __phy_hwtstamp_set - Modify PHY hardware timestamping configuration
*
* @phydev: the PHY device structure
* @config: structure holding the timestamping configuration
* @extack: netlink extended ack structure, for error reporting
*/
int __phy_hwtstamp_set(struct phy_device *phydev,
struct kernel_hwtstamp_config *config,
struct netlink_ext_ack *extack)
{
if (!phydev)
return -ENODEV;
if (phydev->mii_ts && phydev->mii_ts->hwtstamp)
return phydev->mii_ts->hwtstamp(phydev->mii_ts, config, extack);
return -EOPNOTSUPP;
}
/**
* phy_queue_state_machine - Trigger the state machine to run soon
*
* @phydev: the phy_device struct
* @jiffies: Run the state machine after these jiffies
*/
void phy_queue_state_machine(struct phy_device *phydev, unsigned long jiffies)
{
mod_delayed_work(system_power_efficient_wq, &phydev->state_queue,
jiffies);
}
EXPORT_SYMBOL(phy_queue_state_machine);
/**
* phy_trigger_machine - Trigger the state machine to run now
*
* @phydev: the phy_device struct
*/
void phy_trigger_machine(struct phy_device *phydev)
{
phy_queue_state_machine(phydev, 0);
}
EXPORT_SYMBOL(phy_trigger_machine);
static void phy_abort_cable_test(struct phy_device *phydev)
{
int err;
ethnl_cable_test_finished(phydev);
err = phy_init_hw(phydev);
if (err)
phydev_err(phydev, "Error while aborting cable test");
}
/**
* phy_ethtool_get_strings - Get the statistic counter names
*
* @phydev: the phy_device struct
* @data: Where to put the strings
*/
int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data)
{
if (!phydev->drv)
return -EIO;
mutex_lock(&phydev->lock);
phydev->drv->get_strings(phydev, data);
mutex_unlock(&phydev->lock);
return 0;
}
EXPORT_SYMBOL(phy_ethtool_get_strings);
/**
* phy_ethtool_get_sset_count - Get the number of statistic counters
*
* @phydev: the phy_device struct
*/
int phy_ethtool_get_sset_count(struct phy_device *phydev)
{
int ret;
if (!phydev->drv)
return -EIO;
if (phydev->drv->get_sset_count &&
phydev->drv->get_strings &&
phydev->drv->get_stats) {
mutex_lock(&phydev->lock);
ret = phydev->drv->get_sset_count(phydev);
mutex_unlock(&phydev->lock);
return ret;
}
return -EOPNOTSUPP;
}
EXPORT_SYMBOL(phy_ethtool_get_sset_count);
/**
* phy_ethtool_get_stats - Get the statistic counters
*
* @phydev: the phy_device struct
* @stats: What counters to get
* @data: Where to store the counters
*/
int phy_ethtool_get_stats(struct phy_device *phydev,
struct ethtool_stats *stats, u64 *data)
{
if (!phydev->drv)
return -EIO;
mutex_lock(&phydev->lock);
phydev->drv->get_stats(phydev, stats, data);
mutex_unlock(&phydev->lock);
return 0;
}
EXPORT_SYMBOL(phy_ethtool_get_stats);
/**
* phy_ethtool_get_plca_cfg - Get PLCA RS configuration
* @phydev: the phy_device struct
* @plca_cfg: where to store the retrieved configuration
*
* Retrieve the PLCA configuration from the PHY. Return 0 on success or a
* negative value if an error occurred.
*/
int phy_ethtool_get_plca_cfg(struct phy_device *phydev,
struct phy_plca_cfg *plca_cfg)
{
int ret;
if (!phydev->drv) {
ret = -EIO;
goto out;
}
if (!phydev->drv->get_plca_cfg) {
ret = -EOPNOTSUPP;
goto out;
}
mutex_lock(&phydev->lock);
ret = phydev->drv->get_plca_cfg(phydev, plca_cfg);
mutex_unlock(&phydev->lock);
out:
return ret;
}
/**
* plca_check_valid - Check PLCA configuration before enabling
* @phydev: the phy_device struct
* @plca_cfg: current PLCA configuration
* @extack: extack for reporting useful error messages
*
* Checks whether the PLCA and PHY configuration are consistent and it is safe
* to enable PLCA. Returns 0 on success or a negative value if the PLCA or PHY
* configuration is not consistent.
*/
static int plca_check_valid(struct phy_device *phydev,
const struct phy_plca_cfg *plca_cfg,
struct netlink_ext_ack *extack)
{
int ret = 0;
if (!linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT,
phydev->advertising)) {
ret = -EOPNOTSUPP;
NL_SET_ERR_MSG(extack,
"Point to Multi-Point mode is not enabled");
} else if (plca_cfg->node_id >= 255) {
NL_SET_ERR_MSG(extack, "PLCA node ID is not set");
ret = -EINVAL;
}
return ret;
}
/**
* phy_ethtool_set_plca_cfg - Set PLCA RS configuration
* @phydev: the phy_device struct
* @plca_cfg: new PLCA configuration to apply
* @extack: extack for reporting useful error messages
*
* Sets the PLCA configuration in the PHY. Return 0 on success or a
* negative value if an error occurred.
*/
int phy_ethtool_set_plca_cfg(struct phy_device *phydev,
const struct phy_plca_cfg *plca_cfg,
struct netlink_ext_ack *extack)
{
struct phy_plca_cfg *curr_plca_cfg;
int ret;
if (!phydev->drv) {
ret = -EIO;
goto out;
}
if (!phydev->drv->set_plca_cfg ||
!phydev->drv->get_plca_cfg) {
ret = -EOPNOTSUPP;
goto out;
}
curr_plca_cfg = kmalloc(sizeof(*curr_plca_cfg), GFP_KERNEL);
if (!curr_plca_cfg) {
ret = -ENOMEM;
goto out;
}
mutex_lock(&phydev->lock);
ret = phydev->drv->get_plca_cfg(phydev, curr_plca_cfg);
if (ret)
goto out_drv;
if (curr_plca_cfg->enabled < 0 && plca_cfg->enabled >= 0) {
NL_SET_ERR_MSG(extack,
"PHY does not support changing the PLCA 'enable' attribute");
ret = -EINVAL;
goto out_drv;
}
if (curr_plca_cfg->node_id < 0 && plca_cfg->node_id >= 0) {
NL_SET_ERR_MSG(extack,
"PHY does not support changing the PLCA 'local node ID' attribute");
ret = -EINVAL;
goto out_drv;
}
if (curr_plca_cfg->node_cnt < 0 && plca_cfg->node_cnt >= 0) {
NL_SET_ERR_MSG(extack,
"PHY does not support changing the PLCA 'node count' attribute");
ret = -EINVAL;
goto out_drv;
}
if (curr_plca_cfg->to_tmr < 0 && plca_cfg->to_tmr >= 0) {
NL_SET_ERR_MSG(extack,
"PHY does not support changing the PLCA 'TO timer' attribute");
ret = -EINVAL;
goto out_drv;
}
if (curr_plca_cfg->burst_cnt < 0 && plca_cfg->burst_cnt >= 0) {
NL_SET_ERR_MSG(extack,
"PHY does not support changing the PLCA 'burst count' attribute");
ret = -EINVAL;
goto out_drv;
}
if (curr_plca_cfg->burst_tmr < 0 && plca_cfg->burst_tmr >= 0) {
NL_SET_ERR_MSG(extack,
"PHY does not support changing the PLCA 'burst timer' attribute");
ret = -EINVAL;
goto out_drv;
}
// if enabling PLCA, perform a few sanity checks
if (plca_cfg->enabled > 0) {
// allow setting node_id concurrently with enabled
if (plca_cfg->node_id >= 0)
curr_plca_cfg->node_id = plca_cfg->node_id;
ret = plca_check_valid(phydev, curr_plca_cfg, extack);
if (ret)
goto out_drv;
}
ret = phydev->drv->set_plca_cfg(phydev, plca_cfg);
out_drv:
kfree(curr_plca_cfg);
mutex_unlock(&phydev->lock);
out:
return ret;
}
/**
* phy_ethtool_get_plca_status - Get PLCA RS status information
* @phydev: the phy_device struct
* @plca_st: where to store the retrieved status information
*
* Retrieve the PLCA status information from the PHY. Return 0 on success or a
* negative value if an error occurred.
*/
int phy_ethtool_get_plca_status(struct phy_device *phydev,
struct phy_plca_status *plca_st)
{
int ret;
if (!phydev->drv) {
ret = -EIO;
goto out;
}
if (!phydev->drv->get_plca_status) {
ret = -EOPNOTSUPP;
goto out;
}
mutex_lock(&phydev->lock);
ret = phydev->drv->get_plca_status(phydev, plca_st);
mutex_unlock(&phydev->lock);
out:
return ret;
}
/**
* phy_start_cable_test - Start a cable test
*
* @phydev: the phy_device struct
* @extack: extack for reporting useful error messages
*/
int phy_start_cable_test(struct phy_device *phydev,
struct netlink_ext_ack *extack)
{
struct net_device *dev = phydev->attached_dev;
int err = -ENOMEM;
if (!(phydev->drv &&
phydev->drv->cable_test_start &&
phydev->drv->cable_test_get_status)) {
NL_SET_ERR_MSG(extack,
"PHY driver does not support cable testing");
return -EOPNOTSUPP;
}
mutex_lock(&phydev->lock);
if (phydev->state == PHY_CABLETEST) {
NL_SET_ERR_MSG(extack,
"PHY already performing a test");
err = -EBUSY;
goto out;
}
if (phydev->state < PHY_UP ||
phydev->state > PHY_CABLETEST) {
NL_SET_ERR_MSG(extack,
"PHY not configured. Try setting interface up");
err = -EBUSY;
goto out;
}
err = ethnl_cable_test_alloc(phydev, ETHTOOL_MSG_CABLE_TEST_NTF);
if (err)
goto out;
/* Mark the carrier down until the test is complete */
phy_link_down(phydev);
netif_testing_on(dev);
err = phydev->drv->cable_test_start(phydev);
if (err) {
netif_testing_off(dev);
phy_link_up(phydev);
goto out_free;
}
phydev->state = PHY_CABLETEST;
if (phy_polling_mode(phydev))
phy_trigger_machine(phydev);
mutex_unlock(&phydev->lock);
return 0;
out_free:
ethnl_cable_test_free(phydev);
out:
mutex_unlock(&phydev->lock);
return err;
}
EXPORT_SYMBOL(phy_start_cable_test);
/**
* phy_start_cable_test_tdr - Start a raw TDR cable test
*
* @phydev: the phy_device struct
* @extack: extack for reporting useful error messages
* @config: Configuration of the test to run
*/
int phy_start_cable_test_tdr(struct phy_device *phydev,
struct netlink_ext_ack *extack,
const struct phy_tdr_config *config)
{
struct net_device *dev = phydev->attached_dev;
int err = -ENOMEM;
if (!(phydev->drv &&
phydev->drv->cable_test_tdr_start &&
phydev->drv->cable_test_get_status)) {
NL_SET_ERR_MSG(extack,
"PHY driver does not support cable test TDR");
return -EOPNOTSUPP;
}
mutex_lock(&phydev->lock);
if (phydev->state == PHY_CABLETEST) {
NL_SET_ERR_MSG(extack,
"PHY already performing a test");
err = -EBUSY;
goto out;
}
if (phydev->state < PHY_UP ||
phydev->state > PHY_CABLETEST) {
NL_SET_ERR_MSG(extack,
"PHY not configured. Try setting interface up");
err = -EBUSY;
goto out;
}
err = ethnl_cable_test_alloc(phydev, ETHTOOL_MSG_CABLE_TEST_TDR_NTF);
if (err)
goto out;
/* Mark the carrier down until the test is complete */
phy_link_down(phydev);
netif_testing_on(dev);
err = phydev->drv->cable_test_tdr_start(phydev, config);
if (err) {
netif_testing_off(dev);
phy_link_up(phydev);
goto out_free;
}
phydev->state = PHY_CABLETEST;
if (phy_polling_mode(phydev))
phy_trigger_machine(phydev);
mutex_unlock(&phydev->lock);
return 0;
out_free:
ethnl_cable_test_free(phydev);
out:
mutex_unlock(&phydev->lock);
return err;
}
EXPORT_SYMBOL(phy_start_cable_test_tdr);
int phy_config_aneg(struct phy_device *phydev)
{
if (phydev->drv->config_aneg)
return phydev->drv->config_aneg(phydev);
/* Clause 45 PHYs that don't implement Clause 22 registers are not
* allowed to call genphy_config_aneg()
*/
if (phydev->is_c45 && !(phydev->c45_ids.devices_in_package & BIT(0)))
return genphy_c45_config_aneg(phydev);
return genphy_config_aneg(phydev);
}
EXPORT_SYMBOL(phy_config_aneg);
/**
* phy_check_link_status - check link status and set state accordingly
* @phydev: the phy_device struct
*
* Description: Check for link and whether autoneg was triggered / is running
* and set state accordingly
*/
static int phy_check_link_status(struct phy_device *phydev)
{
int err;
lockdep_assert_held(&phydev->lock);
/* Keep previous state if loopback is enabled because some PHYs
* report that Link is Down when loopback is enabled.
*/
if (phydev->loopback_enabled)
return 0;
err = phy_read_status(phydev);
if (err)
return err;
if (phydev->link && phydev->state != PHY_RUNNING) {
phy_check_downshift(phydev);
phydev->state = PHY_RUNNING;
phy_link_up(phydev);
} else if (!phydev->link && phydev->state != PHY_NOLINK) {
phydev->state = PHY_NOLINK;
phy_link_down(phydev);
}
return 0;
}
/**
* _phy_start_aneg - start auto-negotiation for this PHY device
* @phydev: the phy_device struct
*
* Description: Sanitizes the settings (if we're not autonegotiating
* them), and then calls the driver's config_aneg function.
* If the PHYCONTROL Layer is operating, we change the state to
* reflect the beginning of Auto-negotiation or forcing.
*/
int _phy_start_aneg(struct phy_device *phydev)
{
int err;
lockdep_assert_held(&phydev->lock);
if (!phydev->drv)
return -EIO;
if (AUTONEG_DISABLE == phydev->autoneg)
phy_sanitize_settings(phydev);
err = phy_config_aneg(phydev);
if (err < 0)
return err;
if (phy_is_started(phydev))
err = phy_check_link_status(phydev);
return err;
}
EXPORT_SYMBOL(_phy_start_aneg);
/**
* phy_start_aneg - start auto-negotiation for this PHY device
* @phydev: the phy_device struct
*
* Description: Sanitizes the settings (if we're not autonegotiating
* them), and then calls the driver's config_aneg function.
* If the PHYCONTROL Layer is operating, we change the state to
* reflect the beginning of Auto-negotiation or forcing.
*/
int phy_start_aneg(struct phy_device *phydev)
{
int err;
mutex_lock(&phydev->lock);
err = _phy_start_aneg(phydev);
mutex_unlock(&phydev->lock);
return err;
}
EXPORT_SYMBOL(phy_start_aneg);
static int phy_poll_aneg_done(struct phy_device *phydev)
{
unsigned int retries = 100;
int ret;
do {
msleep(100);
ret = phy_aneg_done(phydev);
} while (!ret && --retries);
if (!ret)
return -ETIMEDOUT;
return ret < 0 ? ret : 0;
}
int phy_ethtool_ksettings_set(struct phy_device *phydev,
const struct ethtool_link_ksettings *cmd)
{
__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
u8 autoneg = cmd->base.autoneg;
u8 duplex = cmd->base.duplex;
u32 speed = cmd->base.speed;
if (cmd->base.phy_address != phydev->mdio.addr)
return -EINVAL;
linkmode_copy(advertising, cmd->link_modes.advertising);
/* We make sure that we don't pass unsupported values in to the PHY */
linkmode_and(advertising, advertising, phydev->supported);
/* Verify the settings we care about. */
if (autoneg != AUTONEG_ENABLE && autoneg != AUTONEG_DISABLE)
return -EINVAL;
if (autoneg == AUTONEG_ENABLE && linkmode_empty(advertising))
return -EINVAL;
if (autoneg == AUTONEG_DISABLE &&
((speed != SPEED_1000 &&
speed != SPEED_100 &&
speed != SPEED_10) ||
(duplex != DUPLEX_HALF &&
duplex != DUPLEX_FULL)))
return -EINVAL;
mutex_lock(&phydev->lock);
phydev->autoneg = autoneg;
if (autoneg == AUTONEG_DISABLE) {
phydev->speed = speed;
phydev->duplex = duplex;
}
linkmode_copy(phydev->advertising, advertising);
linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
phydev->advertising, autoneg == AUTONEG_ENABLE);
phydev->master_slave_set = cmd->base.master_slave_cfg;
phydev->mdix_ctrl = cmd->base.eth_tp_mdix_ctrl;
/* Restart the PHY */
if (phy_is_started(phydev)) {
phydev->state = PHY_UP;
phy_trigger_machine(phydev);
} else {
_phy_start_aneg(phydev);
}
mutex_unlock(&phydev->lock);
return 0;
}
EXPORT_SYMBOL(phy_ethtool_ksettings_set);
/**
* phy_speed_down - set speed to lowest speed supported by both link partners
* @phydev: the phy_device struct
* @sync: perform action synchronously
*
* Description: Typically used to save energy when waiting for a WoL packet
*
* WARNING: Setting sync to false may cause the system being unable to suspend
* in case the PHY generates an interrupt when finishing the autonegotiation.
* This interrupt may wake up the system immediately after suspend.
* Therefore use sync = false only if you're sure it's safe with the respective
* network chip.
*/
int phy_speed_down(struct phy_device *phydev, bool sync)
{
__ETHTOOL_DECLARE_LINK_MODE_MASK(adv_tmp);
int ret = 0;
mutex_lock(&phydev->lock);
if (phydev->autoneg != AUTONEG_ENABLE)
goto out;
linkmode_copy(adv_tmp, phydev->advertising);
ret = phy_speed_down_core(phydev);
if (ret)
goto out;
linkmode_copy(phydev->adv_old, adv_tmp);
if (linkmode_equal(phydev->advertising, adv_tmp)) {
ret = 0;
goto out;
}
ret = phy_config_aneg(phydev);
if (ret)
goto out;
ret = sync ? phy_poll_aneg_done(phydev) : 0;
out:
mutex_unlock(&phydev->lock);
return ret;
}
EXPORT_SYMBOL_GPL(phy_speed_down);
/**
* phy_speed_up - (re)set advertised speeds to all supported speeds
* @phydev: the phy_device struct
*
* Description: Used to revert the effect of phy_speed_down
*/
int phy_speed_up(struct phy_device *phydev)
{
__ETHTOOL_DECLARE_LINK_MODE_MASK(adv_tmp);
int ret = 0;
mutex_lock(&phydev->lock);
if (phydev->autoneg != AUTONEG_ENABLE)
goto out;
if (linkmode_empty(phydev->adv_old))
goto out;
linkmode_copy(adv_tmp, phydev->advertising);
linkmode_copy(phydev->advertising, phydev->adv_old);
linkmode_zero(phydev->adv_old);
if (linkmode_equal(phydev->advertising, adv_tmp))
goto out;
ret = phy_config_aneg(phydev);
out:
mutex_unlock(&phydev->lock);
return ret;
}
EXPORT_SYMBOL_GPL(phy_speed_up);
/**
* phy_start_machine - start PHY state machine tracking
* @phydev: the phy_device struct
*
* Description: The PHY infrastructure can run a state machine
* which tracks whether the PHY is starting up, negotiating,
* etc. This function starts the delayed workqueue which tracks
* the state of the PHY. If you want to maintain your own state machine,
* do not call this function.
*/
void phy_start_machine(struct phy_device *phydev)
{
phy_trigger_machine(phydev);
}
EXPORT_SYMBOL_GPL(phy_start_machine);
/**
* phy_stop_machine - stop the PHY state machine tracking
* @phydev: target phy_device struct
*
* Description: Stops the state machine delayed workqueue, sets the
* state to UP (unless it wasn't up yet). This function must be
* called BEFORE phy_detach.
*/
void phy_stop_machine(struct phy_device *phydev)
{
cancel_delayed_work_sync(&phydev->state_queue);
mutex_lock(&phydev->lock);
if (phy_is_started(phydev))
phydev->state = PHY_UP;
mutex_unlock(&phydev->lock);
}
static void phy_process_error(struct phy_device *phydev)
{
/* phydev->lock must be held for the state change to be safe */
if (!mutex_is_locked(&phydev->lock))
phydev_err(phydev, "PHY-device data unsafe context\n");
phydev->state = PHY_ERROR;
phy_trigger_machine(phydev);
}
static void phy_error_precise(struct phy_device *phydev,
const void *func, int err)
{
WARN(1, "%pS: returned: %d\n", func, err);
phy_process_error(phydev);
}
/**
* phy_error - enter ERROR state for this PHY device
* @phydev: target phy_device struct
*
* Moves the PHY to the ERROR state in response to a read
* or write error, and tells the controller the link is down.
* Must be called with phydev->lock held.
*/
void phy_error(struct phy_device *phydev)
{
WARN_ON(1);
phy_process_error(phydev);
}
EXPORT_SYMBOL(phy_error);
/**
* phy_disable_interrupts - Disable the PHY interrupts from the PHY side
* @phydev: target phy_device struct
*/
int phy_disable_interrupts(struct phy_device *phydev)
{
/* Disable PHY interrupts */
return phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
}
/**
* phy_interrupt - PHY interrupt handler
* @irq: interrupt line
* @phy_dat: phy_device pointer
*
* Description: Handle PHY interrupt
*/
static irqreturn_t phy_interrupt(int irq, void *phy_dat)
{
struct phy_device *phydev = phy_dat;
struct phy_driver *drv = phydev->drv;
irqreturn_t ret;
/* Wakeup interrupts may occur during a system sleep transition.
* Postpone handling until the PHY has resumed.
*/
if (IS_ENABLED(CONFIG_PM_SLEEP) && phydev->irq_suspended) {
struct net_device *netdev = phydev->attached_dev;
if (netdev) {
struct device *parent = netdev->dev.parent;
if (netdev->wol_enabled)
pm_system_wakeup();
else if (device_may_wakeup(&netdev->dev))
pm_wakeup_dev_event(&netdev->dev, 0, true);
else if (parent && device_may_wakeup(parent))
pm_wakeup_dev_event(parent, 0, true);
}
phydev->irq_rerun = 1;
disable_irq_nosync(irq);
return IRQ_HANDLED;
}
mutex_lock(&phydev->lock);
ret = drv->handle_interrupt(phydev);
mutex_unlock(&phydev->lock);
return ret;
}
/**
* phy_enable_interrupts - Enable the interrupts from the PHY side
* @phydev: target phy_device struct
*/
static int phy_enable_interrupts(struct phy_device *phydev)
{
return phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
}
/**
* phy_request_interrupt - request and enable interrupt for a PHY device
* @phydev: target phy_device struct
*
* Description: Request and enable the interrupt for the given PHY.
* If this fails, then we set irq to PHY_POLL.
* This should only be called with a valid IRQ number.
*/
void phy_request_interrupt(struct phy_device *phydev)
{
int err;
err = request_threaded_irq(phydev->irq, NULL, phy_interrupt,
IRQF_ONESHOT | IRQF_SHARED,
phydev_name(phydev), phydev);
if (err) {
phydev_warn(phydev, "Error %d requesting IRQ %d, falling back to polling\n",
err, phydev->irq);
phydev->irq = PHY_POLL;
} else {
if (phy_enable_interrupts(phydev)) {
phydev_warn(phydev, "Can't enable interrupt, falling back to polling\n");
phy_free_interrupt(phydev);
phydev->irq = PHY_POLL;
}
}
}
EXPORT_SYMBOL(phy_request_interrupt);
/**
* phy_free_interrupt - disable and free interrupt for a PHY device
* @phydev: target phy_device struct
*
* Description: Disable and free the interrupt for the given PHY.
* This should only be called with a valid IRQ number.
*/
void phy_free_interrupt(struct phy_device *phydev)
{
phy_disable_interrupts(phydev);
free_irq(phydev->irq, phydev);
}
EXPORT_SYMBOL(phy_free_interrupt);
enum phy_state_work {
PHY_STATE_WORK_NONE,
PHY_STATE_WORK_ANEG,
PHY_STATE_WORK_SUSPEND,
};
static enum phy_state_work _phy_state_machine(struct phy_device *phydev)
{
enum phy_state_work state_work = PHY_STATE_WORK_NONE;
struct net_device *dev = phydev->attached_dev;
enum phy_state old_state = phydev->state;
const void *func = NULL;
bool finished = false;
int err = 0;
switch (phydev->state) {
case PHY_DOWN:
case PHY_READY:
break;
case PHY_UP:
state_work = PHY_STATE_WORK_ANEG;
break;
case PHY_NOLINK:
case PHY_RUNNING:
err = phy_check_link_status(phydev);
func = &phy_check_link_status;
break;
case PHY_CABLETEST:
err = phydev->drv->cable_test_get_status(phydev, &finished);
if (err) {
phy_abort_cable_test(phydev);
netif_testing_off(dev);
state_work = PHY_STATE_WORK_ANEG;
phydev->state = PHY_UP;
break;
}
if (finished) {
ethnl_cable_test_finished(phydev);
netif_testing_off(dev);
state_work = PHY_STATE_WORK_ANEG;
phydev->state = PHY_UP;
}
break;
case PHY_HALTED:
case PHY_ERROR:
if (phydev->link) {
phydev->link = 0;
phy_link_down(phydev);
}
state_work = PHY_STATE_WORK_SUSPEND;
break;
}
if (state_work == PHY_STATE_WORK_ANEG) {
err = _phy_start_aneg(phydev);
func = &_phy_start_aneg;
}
if (err == -ENODEV)
return state_work;
if (err < 0)
phy_error_precise(phydev, func, err);
phy_process_state_change(phydev, old_state);
/* Only re-schedule a PHY state machine change if we are polling the
* PHY, if PHY_MAC_INTERRUPT is set, then we will be moving
* between states from phy_mac_interrupt().
*
* In state PHY_HALTED the PHY gets suspended, so rescheduling the
* state machine would be pointless and possibly error prone when
* called from phy_disconnect() synchronously.
*/
if (phy_polling_mode(phydev) && phy_is_started(phydev))
phy_queue_state_machine(phydev, PHY_STATE_TIME);
return state_work;
}
/* unlocked part of the PHY state machine */
static void _phy_state_machine_post_work(struct phy_device *phydev,
enum phy_state_work state_work)
{
if (state_work == PHY_STATE_WORK_SUSPEND)
phy_suspend(phydev);
}
/**
* phy_state_machine - Handle the state machine
* @work: work_struct that describes the work to be done
*/
void phy_state_machine(struct work_struct *work)
{
struct delayed_work *dwork = to_delayed_work(work);
struct phy_device *phydev =
container_of(dwork, struct phy_device, state_queue);
enum phy_state_work state_work;
mutex_lock(&phydev->lock);
state_work = _phy_state_machine(phydev);
mutex_unlock(&phydev->lock);
_phy_state_machine_post_work(phydev, state_work);
}
/**
* phy_stop - Bring down the PHY link, and stop checking the status
* @phydev: target phy_device struct
*/
void phy_stop(struct phy_device *phydev)
{
struct net_device *dev = phydev->attached_dev;
enum phy_state_work state_work;
enum phy_state old_state;
if (!phy_is_started(phydev) && phydev->state != PHY_DOWN &&
phydev->state != PHY_ERROR) {
WARN(1, "called from state %s\n",
phy_state_to_str(phydev->state));
return;
}
mutex_lock(&phydev->lock);
old_state = phydev->state;
if (phydev->state == PHY_CABLETEST) {
phy_abort_cable_test(phydev);
netif_testing_off(dev);
}
if (phydev->sfp_bus)
sfp_upstream_stop(phydev->sfp_bus);
phydev->state = PHY_HALTED;
phy_process_state_change(phydev, old_state);
state_work = _phy_state_machine(phydev);
mutex_unlock(&phydev->lock);
_phy_state_machine_post_work(phydev, state_work);
phy_stop_machine(phydev);
/* Cannot call flush_scheduled_work() here as desired because
* of rtnl_lock(), but PHY_HALTED shall guarantee irq handler
* will not reenable interrupts.
*/
}
EXPORT_SYMBOL(phy_stop);
/**
* phy_start - start or restart a PHY device
* @phydev: target phy_device struct
*
* Description: Indicates the attached device's readiness to
* handle PHY-related work. Used during startup to start the
* PHY, and after a call to phy_stop() to resume operation.
* Also used to indicate the MDIO bus has cleared an error
* condition.
*/
void phy_start(struct phy_device *phydev)
{
mutex_lock(&phydev->lock);
if (phydev->state != PHY_READY && phydev->state != PHY_HALTED) {
WARN(1, "called from state %s\n",
phy_state_to_str(phydev->state));
goto out;
}
if (phydev->sfp_bus)
sfp_upstream_start(phydev->sfp_bus);
/* if phy was suspended, bring the physical link up again */
__phy_resume(phydev);
phydev->state = PHY_UP;
phy_start_machine(phydev);
out:
mutex_unlock(&phydev->lock);
}
EXPORT_SYMBOL(phy_start);
/**
* phy_mac_interrupt - MAC says the link has changed
* @phydev: phy_device struct with changed link
*
* The MAC layer is able to indicate there has been a change in the PHY link
* status. Trigger the state machine and work a work queue.
*/
void phy_mac_interrupt(struct phy_device *phydev)
{
/* Trigger a state machine change */
phy_trigger_machine(phydev);
}
EXPORT_SYMBOL(phy_mac_interrupt);
/**
* phy_init_eee - init and check the EEE feature
* @phydev: target phy_device struct
* @clk_stop_enable: PHY may stop the clock during LPI
*
* Description: it checks if the Energy-Efficient Ethernet (EEE)
* is supported by looking at the MMD registers 3.20 and 7.60/61
* and it programs the MMD register 3.0 setting the "Clock stop enable"
* bit if required.
*/
int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
{
int ret;
if (!phydev->drv)
return -EIO;
ret = genphy_c45_eee_is_active(phydev, NULL, NULL, NULL);
if (ret < 0)
return ret;
if (!ret)
return -EPROTONOSUPPORT;
if (clk_stop_enable)
/* Configure the PHY to stop receiving xMII
* clock while it is signaling LPI.
*/
ret = phy_set_bits_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1,
MDIO_PCS_CTRL1_CLKSTOP_EN);
return ret < 0 ? ret : 0;
}
EXPORT_SYMBOL(phy_init_eee);
/**
* phy_get_eee_err - report the EEE wake error count
* @phydev: target phy_device struct
*
* Description: it is to report the number of time where the PHY
* failed to complete its normal wake sequence.
*/
int phy_get_eee_err(struct phy_device *phydev)
{
int ret;
if (!phydev->drv)
return -EIO;
mutex_lock(&phydev->lock);
ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_WK_ERR);
mutex_unlock(&phydev->lock);
return ret;
}
EXPORT_SYMBOL(phy_get_eee_err);
/**
* phy_ethtool_get_eee - get EEE supported and status
* @phydev: target phy_device struct
* @data: ethtool_eee data
*
* Description: it reportes the Supported/Advertisement/LP Advertisement
* capabilities.
*/
int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data)
{
int ret;
if (!phydev->drv)
return -EIO;
mutex_lock(&phydev->lock);
ret = genphy_c45_ethtool_get_eee(phydev, data);
mutex_unlock(&phydev->lock);
return ret;
}
EXPORT_SYMBOL(phy_ethtool_get_eee);
/**
* phy_ethtool_set_eee - set EEE supported and status
* @phydev: target phy_device struct
* @data: ethtool_eee data
*
* Description: it is to program the Advertisement EEE register.
*/
int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
{
int ret;
if (!phydev->drv)
return -EIO;
mutex_lock(&phydev->lock);
ret = genphy_c45_ethtool_set_eee(phydev, data);
mutex_unlock(&phydev->lock);
return ret;
}
EXPORT_SYMBOL(phy_ethtool_set_eee);
/**
* phy_ethtool_set_wol - Configure Wake On LAN
*
* @phydev: target phy_device struct
* @wol: Configuration requested
*/
int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
{
int ret;
if (phydev->drv && phydev->drv->set_wol) {
mutex_lock(&phydev->lock);
ret = phydev->drv->set_wol(phydev, wol);
mutex_unlock(&phydev->lock);
return ret;
}
return -EOPNOTSUPP;
}
EXPORT_SYMBOL(phy_ethtool_set_wol);
/**
* phy_ethtool_get_wol - Get the current Wake On LAN configuration
*
* @phydev: target phy_device struct
* @wol: Store the current configuration here
*/
void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
{
if (phydev->drv && phydev->drv->get_wol) {
mutex_lock(&phydev->lock);
phydev->drv->get_wol(phydev, wol);
mutex_unlock(&phydev->lock);
}
}
EXPORT_SYMBOL(phy_ethtool_get_wol);
int phy_ethtool_get_link_ksettings(struct net_device *ndev,
struct ethtool_link_ksettings *cmd)
{
struct phy_device *phydev = ndev->phydev;
if (!phydev)
return -ENODEV;
phy_ethtool_ksettings_get(phydev, cmd);
return 0;
}
EXPORT_SYMBOL(phy_ethtool_get_link_ksettings);
int phy_ethtool_set_link_ksettings(struct net_device *ndev,
const struct ethtool_link_ksettings *cmd)
{
struct phy_device *phydev = ndev->phydev;
if (!phydev)
return -ENODEV;
return phy_ethtool_ksettings_set(phydev, cmd);
}
EXPORT_SYMBOL(phy_ethtool_set_link_ksettings);
/**
* phy_ethtool_nway_reset - Restart auto negotiation
* @ndev: Network device to restart autoneg for
*/
int phy_ethtool_nway_reset(struct net_device *ndev)
{
struct phy_device *phydev = ndev->phydev;
int ret;
if (!phydev)
return -ENODEV;
if (!phydev->drv)
return -EIO;
mutex_lock(&phydev->lock);
ret = phy_restart_aneg(phydev);
mutex_unlock(&phydev->lock);
return ret;
}
EXPORT_SYMBOL(phy_ethtool_nway_reset);