blob: 894172a3e15fe8a6a86e38b64246ebefcb65362b [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/* drivers/net/phy/realtek.c
*
* Driver for Realtek PHYs
*
* Author: Johnson Leung <r58129@freescale.com>
*
* Copyright (c) 2004 Freescale Semiconductor, Inc.
*/
#include <linux/bitops.h>
#include <linux/of.h>
#include <linux/phy.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/clk.h>
#define RTL821x_PHYSR 0x11
#define RTL821x_PHYSR_DUPLEX BIT(13)
#define RTL821x_PHYSR_SPEED GENMASK(15, 14)
#define RTL821x_INER 0x12
#define RTL8211B_INER_INIT 0x6400
#define RTL8211E_INER_LINK_STATUS BIT(10)
#define RTL8211F_INER_LINK_STATUS BIT(4)
#define RTL821x_INSR 0x13
#define RTL821x_EXT_PAGE_SELECT 0x1e
#define RTL821x_PAGE_SELECT 0x1f
#define RTL8211F_PHYCR1 0x18
#define RTL8211F_PHYCR2 0x19
#define RTL8211F_INSR 0x1d
#define RTL8211F_TX_DELAY BIT(8)
#define RTL8211F_RX_DELAY BIT(3)
#define RTL8211F_ALDPS_PLL_OFF BIT(1)
#define RTL8211F_ALDPS_ENABLE BIT(2)
#define RTL8211F_ALDPS_XTAL_OFF BIT(12)
#define RTL8211E_CTRL_DELAY BIT(13)
#define RTL8211E_TX_DELAY BIT(12)
#define RTL8211E_RX_DELAY BIT(11)
#define RTL8211F_CLKOUT_EN BIT(0)
#define RTL8201F_ISR 0x1e
#define RTL8201F_ISR_ANERR BIT(15)
#define RTL8201F_ISR_DUPLEX BIT(13)
#define RTL8201F_ISR_LINK BIT(11)
#define RTL8201F_ISR_MASK (RTL8201F_ISR_ANERR | \
RTL8201F_ISR_DUPLEX | \
RTL8201F_ISR_LINK)
#define RTL8201F_IER 0x13
#define RTL8366RB_POWER_SAVE 0x15
#define RTL8366RB_POWER_SAVE_ON BIT(12)
#define RTL_SUPPORTS_5000FULL BIT(14)
#define RTL_SUPPORTS_2500FULL BIT(13)
#define RTL_SUPPORTS_10000FULL BIT(0)
#define RTL_ADV_2500FULL BIT(7)
#define RTL_LPADV_10000FULL BIT(11)
#define RTL_LPADV_5000FULL BIT(6)
#define RTL_LPADV_2500FULL BIT(5)
#define RTL9000A_GINMR 0x14
#define RTL9000A_GINMR_LINK_STATUS BIT(4)
#define RTLGEN_SPEED_MASK 0x0630
#define RTL_GENERIC_PHYID 0x001cc800
#define RTL_8211FVD_PHYID 0x001cc878
MODULE_DESCRIPTION("Realtek PHY driver");
MODULE_AUTHOR("Johnson Leung");
MODULE_LICENSE("GPL");
struct rtl821x_priv {
u16 phycr1;
u16 phycr2;
bool has_phycr2;
struct clk *clk;
};
static int rtl821x_read_page(struct phy_device *phydev)
{
return __phy_read(phydev, RTL821x_PAGE_SELECT);
}
static int rtl821x_write_page(struct phy_device *phydev, int page)
{
return __phy_write(phydev, RTL821x_PAGE_SELECT, page);
}
static int rtl821x_probe(struct phy_device *phydev)
{
struct device *dev = &phydev->mdio.dev;
struct rtl821x_priv *priv;
u32 phy_id = phydev->drv->phy_id;
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->clk = devm_clk_get_optional_enabled(dev, NULL);
if (IS_ERR(priv->clk))
return dev_err_probe(dev, PTR_ERR(priv->clk),
"failed to get phy clock\n");
ret = phy_read_paged(phydev, 0xa43, RTL8211F_PHYCR1);
if (ret < 0)
return ret;
priv->phycr1 = ret & (RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_XTAL_OFF);
if (of_property_read_bool(dev->of_node, "realtek,aldps-enable"))
priv->phycr1 |= RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_XTAL_OFF;
priv->has_phycr2 = !(phy_id == RTL_8211FVD_PHYID);
if (priv->has_phycr2) {
ret = phy_read_paged(phydev, 0xa43, RTL8211F_PHYCR2);
if (ret < 0)
return ret;
priv->phycr2 = ret & RTL8211F_CLKOUT_EN;
if (of_property_read_bool(dev->of_node, "realtek,clkout-disable"))
priv->phycr2 &= ~RTL8211F_CLKOUT_EN;
}
phydev->priv = priv;
return 0;
}
static int rtl8201_ack_interrupt(struct phy_device *phydev)
{
int err;
err = phy_read(phydev, RTL8201F_ISR);
return (err < 0) ? err : 0;
}
static int rtl821x_ack_interrupt(struct phy_device *phydev)
{
int err;
err = phy_read(phydev, RTL821x_INSR);
return (err < 0) ? err : 0;
}
static int rtl8211f_ack_interrupt(struct phy_device *phydev)
{
int err;
err = phy_read_paged(phydev, 0xa43, RTL8211F_INSR);
return (err < 0) ? err : 0;
}
static int rtl8201_config_intr(struct phy_device *phydev)
{
u16 val;
int err;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
err = rtl8201_ack_interrupt(phydev);
if (err)
return err;
val = BIT(13) | BIT(12) | BIT(11);
err = phy_write_paged(phydev, 0x7, RTL8201F_IER, val);
} else {
val = 0;
err = phy_write_paged(phydev, 0x7, RTL8201F_IER, val);
if (err)
return err;
err = rtl8201_ack_interrupt(phydev);
}
return err;
}
static int rtl8211b_config_intr(struct phy_device *phydev)
{
int err;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
err = rtl821x_ack_interrupt(phydev);
if (err)
return err;
err = phy_write(phydev, RTL821x_INER,
RTL8211B_INER_INIT);
} else {
err = phy_write(phydev, RTL821x_INER, 0);
if (err)
return err;
err = rtl821x_ack_interrupt(phydev);
}
return err;
}
static int rtl8211e_config_intr(struct phy_device *phydev)
{
int err;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
err = rtl821x_ack_interrupt(phydev);
if (err)
return err;
err = phy_write(phydev, RTL821x_INER,
RTL8211E_INER_LINK_STATUS);
} else {
err = phy_write(phydev, RTL821x_INER, 0);
if (err)
return err;
err = rtl821x_ack_interrupt(phydev);
}
return err;
}
static int rtl8211f_config_intr(struct phy_device *phydev)
{
u16 val;
int err;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
err = rtl8211f_ack_interrupt(phydev);
if (err)
return err;
val = RTL8211F_INER_LINK_STATUS;
err = phy_write_paged(phydev, 0xa42, RTL821x_INER, val);
} else {
val = 0;
err = phy_write_paged(phydev, 0xa42, RTL821x_INER, val);
if (err)
return err;
err = rtl8211f_ack_interrupt(phydev);
}
return err;
}
static irqreturn_t rtl8201_handle_interrupt(struct phy_device *phydev)
{
int irq_status;
irq_status = phy_read(phydev, RTL8201F_ISR);
if (irq_status < 0) {
phy_error(phydev);
return IRQ_NONE;
}
if (!(irq_status & RTL8201F_ISR_MASK))
return IRQ_NONE;
phy_trigger_machine(phydev);
return IRQ_HANDLED;
}
static irqreturn_t rtl821x_handle_interrupt(struct phy_device *phydev)
{
int irq_status, irq_enabled;
irq_status = phy_read(phydev, RTL821x_INSR);
if (irq_status < 0) {
phy_error(phydev);
return IRQ_NONE;
}
irq_enabled = phy_read(phydev, RTL821x_INER);
if (irq_enabled < 0) {
phy_error(phydev);
return IRQ_NONE;
}
if (!(irq_status & irq_enabled))
return IRQ_NONE;
phy_trigger_machine(phydev);
return IRQ_HANDLED;
}
static irqreturn_t rtl8211f_handle_interrupt(struct phy_device *phydev)
{
int irq_status;
irq_status = phy_read_paged(phydev, 0xa43, RTL8211F_INSR);
if (irq_status < 0) {
phy_error(phydev);
return IRQ_NONE;
}
if (!(irq_status & RTL8211F_INER_LINK_STATUS))
return IRQ_NONE;
phy_trigger_machine(phydev);
return IRQ_HANDLED;
}
static int rtl8211_config_aneg(struct phy_device *phydev)
{
int ret;
ret = genphy_config_aneg(phydev);
if (ret < 0)
return ret;
/* Quirk was copied from vendor driver. Unfortunately it includes no
* description of the magic numbers.
*/
if (phydev->speed == SPEED_100 && phydev->autoneg == AUTONEG_DISABLE) {
phy_write(phydev, 0x17, 0x2138);
phy_write(phydev, 0x0e, 0x0260);
} else {
phy_write(phydev, 0x17, 0x2108);
phy_write(phydev, 0x0e, 0x0000);
}
return 0;
}
static int rtl8211c_config_init(struct phy_device *phydev)
{
/* RTL8211C has an issue when operating in Gigabit slave mode */
return phy_set_bits(phydev, MII_CTRL1000,
CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER);
}
static int rtl8211f_config_init(struct phy_device *phydev)
{
struct rtl821x_priv *priv = phydev->priv;
struct device *dev = &phydev->mdio.dev;
u16 val_txdly, val_rxdly;
int ret;
ret = phy_modify_paged_changed(phydev, 0xa43, RTL8211F_PHYCR1,
RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_XTAL_OFF,
priv->phycr1);
if (ret < 0) {
dev_err(dev, "aldps mode configuration failed: %pe\n",
ERR_PTR(ret));
return ret;
}
switch (phydev->interface) {
case PHY_INTERFACE_MODE_RGMII:
val_txdly = 0;
val_rxdly = 0;
break;
case PHY_INTERFACE_MODE_RGMII_RXID:
val_txdly = 0;
val_rxdly = RTL8211F_RX_DELAY;
break;
case PHY_INTERFACE_MODE_RGMII_TXID:
val_txdly = RTL8211F_TX_DELAY;
val_rxdly = 0;
break;
case PHY_INTERFACE_MODE_RGMII_ID:
val_txdly = RTL8211F_TX_DELAY;
val_rxdly = RTL8211F_RX_DELAY;
break;
default: /* the rest of the modes imply leaving delay as is. */
return 0;
}
ret = phy_modify_paged_changed(phydev, 0xd08, 0x11, RTL8211F_TX_DELAY,
val_txdly);
if (ret < 0) {
dev_err(dev, "Failed to update the TX delay register\n");
return ret;
} else if (ret) {
dev_dbg(dev,
"%s 2ns TX delay (and changing the value from pin-strapping RXD1 or the bootloader)\n",
val_txdly ? "Enabling" : "Disabling");
} else {
dev_dbg(dev,
"2ns TX delay was already %s (by pin-strapping RXD1 or bootloader configuration)\n",
val_txdly ? "enabled" : "disabled");
}
ret = phy_modify_paged_changed(phydev, 0xd08, 0x15, RTL8211F_RX_DELAY,
val_rxdly);
if (ret < 0) {
dev_err(dev, "Failed to update the RX delay register\n");
return ret;
} else if (ret) {
dev_dbg(dev,
"%s 2ns RX delay (and changing the value from pin-strapping RXD0 or the bootloader)\n",
val_rxdly ? "Enabling" : "Disabling");
} else {
dev_dbg(dev,
"2ns RX delay was already %s (by pin-strapping RXD0 or bootloader configuration)\n",
val_rxdly ? "enabled" : "disabled");
}
if (priv->has_phycr2) {
ret = phy_modify_paged(phydev, 0xa43, RTL8211F_PHYCR2,
RTL8211F_CLKOUT_EN, priv->phycr2);
if (ret < 0) {
dev_err(dev, "clkout configuration failed: %pe\n",
ERR_PTR(ret));
return ret;
}
}
return genphy_soft_reset(phydev);
}
static int rtl821x_suspend(struct phy_device *phydev)
{
struct rtl821x_priv *priv = phydev->priv;
int ret = 0;
if (!phydev->wol_enabled) {
ret = genphy_suspend(phydev);
if (ret)
return ret;
clk_disable_unprepare(priv->clk);
}
return ret;
}
static int rtl821x_resume(struct phy_device *phydev)
{
struct rtl821x_priv *priv = phydev->priv;
int ret;
if (!phydev->wol_enabled)
clk_prepare_enable(priv->clk);
ret = genphy_resume(phydev);
if (ret < 0)
return ret;
msleep(20);
return 0;
}
static int rtl8211e_config_init(struct phy_device *phydev)
{
int ret = 0, oldpage;
u16 val;
/* enable TX/RX delay for rgmii-* modes, and disable them for rgmii. */
switch (phydev->interface) {
case PHY_INTERFACE_MODE_RGMII:
val = RTL8211E_CTRL_DELAY | 0;
break;
case PHY_INTERFACE_MODE_RGMII_ID:
val = RTL8211E_CTRL_DELAY | RTL8211E_TX_DELAY | RTL8211E_RX_DELAY;
break;
case PHY_INTERFACE_MODE_RGMII_RXID:
val = RTL8211E_CTRL_DELAY | RTL8211E_RX_DELAY;
break;
case PHY_INTERFACE_MODE_RGMII_TXID:
val = RTL8211E_CTRL_DELAY | RTL8211E_TX_DELAY;
break;
default: /* the rest of the modes imply leaving delays as is. */
return 0;
}
/* According to a sample driver there is a 0x1c config register on the
* 0xa4 extension page (0x7) layout. It can be used to disable/enable
* the RX/TX delays otherwise controlled by RXDLY/TXDLY pins.
* The configuration register definition:
* 14 = reserved
* 13 = Force Tx RX Delay controlled by bit12 bit11,
* 12 = RX Delay, 11 = TX Delay
* 10:0 = Test && debug settings reserved by realtek
*/
oldpage = phy_select_page(phydev, 0x7);
if (oldpage < 0)
goto err_restore_page;
ret = __phy_write(phydev, RTL821x_EXT_PAGE_SELECT, 0xa4);
if (ret)
goto err_restore_page;
ret = __phy_modify(phydev, 0x1c, RTL8211E_CTRL_DELAY
| RTL8211E_TX_DELAY | RTL8211E_RX_DELAY,
val);
err_restore_page:
return phy_restore_page(phydev, oldpage, ret);
}
static int rtl8211b_suspend(struct phy_device *phydev)
{
phy_write(phydev, MII_MMD_DATA, BIT(9));
return genphy_suspend(phydev);
}
static int rtl8211b_resume(struct phy_device *phydev)
{
phy_write(phydev, MII_MMD_DATA, 0);
return genphy_resume(phydev);
}
static int rtl8366rb_config_init(struct phy_device *phydev)
{
int ret;
ret = phy_set_bits(phydev, RTL8366RB_POWER_SAVE,
RTL8366RB_POWER_SAVE_ON);
if (ret) {
dev_err(&phydev->mdio.dev,
"error enabling power management\n");
}
return ret;
}
/* get actual speed to cover the downshift case */
static int rtlgen_get_speed(struct phy_device *phydev)
{
int val;
if (!phydev->link)
return 0;
val = phy_read_paged(phydev, 0xa43, 0x12);
if (val < 0)
return val;
switch (val & RTLGEN_SPEED_MASK) {
case 0x0000:
phydev->speed = SPEED_10;
break;
case 0x0010:
phydev->speed = SPEED_100;
break;
case 0x0020:
phydev->speed = SPEED_1000;
break;
case 0x0200:
phydev->speed = SPEED_10000;
break;
case 0x0210:
phydev->speed = SPEED_2500;
break;
case 0x0220:
phydev->speed = SPEED_5000;
break;
default:
break;
}
return 0;
}
static int rtlgen_read_status(struct phy_device *phydev)
{
int ret;
ret = genphy_read_status(phydev);
if (ret < 0)
return ret;
return rtlgen_get_speed(phydev);
}
static int rtlgen_read_mmd(struct phy_device *phydev, int devnum, u16 regnum)
{
int ret;
if (devnum == MDIO_MMD_PCS && regnum == MDIO_PCS_EEE_ABLE) {
rtl821x_write_page(phydev, 0xa5c);
ret = __phy_read(phydev, 0x12);
rtl821x_write_page(phydev, 0);
} else if (devnum == MDIO_MMD_AN && regnum == MDIO_AN_EEE_ADV) {
rtl821x_write_page(phydev, 0xa5d);
ret = __phy_read(phydev, 0x10);
rtl821x_write_page(phydev, 0);
} else if (devnum == MDIO_MMD_AN && regnum == MDIO_AN_EEE_LPABLE) {
rtl821x_write_page(phydev, 0xa5d);
ret = __phy_read(phydev, 0x11);
rtl821x_write_page(phydev, 0);
} else {
ret = -EOPNOTSUPP;
}
return ret;
}
static int rtlgen_write_mmd(struct phy_device *phydev, int devnum, u16 regnum,
u16 val)
{
int ret;
if (devnum == MDIO_MMD_AN && regnum == MDIO_AN_EEE_ADV) {
rtl821x_write_page(phydev, 0xa5d);
ret = __phy_write(phydev, 0x10, val);
rtl821x_write_page(phydev, 0);
} else {
ret = -EOPNOTSUPP;
}
return ret;
}
static int rtl822x_read_mmd(struct phy_device *phydev, int devnum, u16 regnum)
{
int ret = rtlgen_read_mmd(phydev, devnum, regnum);
if (ret != -EOPNOTSUPP)
return ret;
if (devnum == MDIO_MMD_PCS && regnum == MDIO_PCS_EEE_ABLE2) {
rtl821x_write_page(phydev, 0xa6e);
ret = __phy_read(phydev, 0x16);
rtl821x_write_page(phydev, 0);
} else if (devnum == MDIO_MMD_AN && regnum == MDIO_AN_EEE_ADV2) {
rtl821x_write_page(phydev, 0xa6d);
ret = __phy_read(phydev, 0x12);
rtl821x_write_page(phydev, 0);
} else if (devnum == MDIO_MMD_AN && regnum == MDIO_AN_EEE_LPABLE2) {
rtl821x_write_page(phydev, 0xa6d);
ret = __phy_read(phydev, 0x10);
rtl821x_write_page(phydev, 0);
}
return ret;
}
static int rtl822x_write_mmd(struct phy_device *phydev, int devnum, u16 regnum,
u16 val)
{
int ret = rtlgen_write_mmd(phydev, devnum, regnum, val);
if (ret != -EOPNOTSUPP)
return ret;
if (devnum == MDIO_MMD_AN && regnum == MDIO_AN_EEE_ADV2) {
rtl821x_write_page(phydev, 0xa6d);
ret = __phy_write(phydev, 0x12, val);
rtl821x_write_page(phydev, 0);
}
return ret;
}
static int rtl822x_get_features(struct phy_device *phydev)
{
int val;
val = phy_read_paged(phydev, 0xa61, 0x13);
if (val < 0)
return val;
linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
phydev->supported, val & RTL_SUPPORTS_2500FULL);
linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
phydev->supported, val & RTL_SUPPORTS_5000FULL);
linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
phydev->supported, val & RTL_SUPPORTS_10000FULL);
return genphy_read_abilities(phydev);
}
static int rtl822x_config_aneg(struct phy_device *phydev)
{
int ret = 0;
if (phydev->autoneg == AUTONEG_ENABLE) {
u16 adv2500 = 0;
if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
phydev->advertising))
adv2500 = RTL_ADV_2500FULL;
ret = phy_modify_paged_changed(phydev, 0xa5d, 0x12,
RTL_ADV_2500FULL, adv2500);
if (ret < 0)
return ret;
}
return __genphy_config_aneg(phydev, ret);
}
static int rtl822x_read_status(struct phy_device *phydev)
{
int ret;
if (phydev->autoneg == AUTONEG_ENABLE) {
int lpadv = phy_read_paged(phydev, 0xa5d, 0x13);
if (lpadv < 0)
return lpadv;
linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
phydev->lp_advertising, lpadv & RTL_LPADV_10000FULL);
linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
phydev->lp_advertising, lpadv & RTL_LPADV_5000FULL);
linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
phydev->lp_advertising, lpadv & RTL_LPADV_2500FULL);
}
ret = genphy_read_status(phydev);
if (ret < 0)
return ret;
return rtlgen_get_speed(phydev);
}
static bool rtlgen_supports_2_5gbps(struct phy_device *phydev)
{
int val;
phy_write(phydev, RTL821x_PAGE_SELECT, 0xa61);
val = phy_read(phydev, 0x13);
phy_write(phydev, RTL821x_PAGE_SELECT, 0);
return val >= 0 && val & RTL_SUPPORTS_2500FULL;
}
static int rtlgen_match_phy_device(struct phy_device *phydev)
{
return phydev->phy_id == RTL_GENERIC_PHYID &&
!rtlgen_supports_2_5gbps(phydev);
}
static int rtl8226_match_phy_device(struct phy_device *phydev)
{
return phydev->phy_id == RTL_GENERIC_PHYID &&
rtlgen_supports_2_5gbps(phydev);
}
static int rtlgen_resume(struct phy_device *phydev)
{
int ret = genphy_resume(phydev);
/* Internal PHY's from RTL8168h up may not be instantly ready */
msleep(20);
return ret;
}
static int rtl9000a_config_init(struct phy_device *phydev)
{
phydev->autoneg = AUTONEG_DISABLE;
phydev->speed = SPEED_100;
phydev->duplex = DUPLEX_FULL;
return 0;
}
static int rtl9000a_config_aneg(struct phy_device *phydev)
{
int ret;
u16 ctl = 0;
switch (phydev->master_slave_set) {
case MASTER_SLAVE_CFG_MASTER_FORCE:
ctl |= CTL1000_AS_MASTER;
break;
case MASTER_SLAVE_CFG_SLAVE_FORCE:
break;
case MASTER_SLAVE_CFG_UNKNOWN:
case MASTER_SLAVE_CFG_UNSUPPORTED:
return 0;
default:
phydev_warn(phydev, "Unsupported Master/Slave mode\n");
return -EOPNOTSUPP;
}
ret = phy_modify_changed(phydev, MII_CTRL1000, CTL1000_AS_MASTER, ctl);
if (ret == 1)
ret = genphy_soft_reset(phydev);
return ret;
}
static int rtl9000a_read_status(struct phy_device *phydev)
{
int ret;
phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN;
phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN;
ret = genphy_update_link(phydev);
if (ret)
return ret;
ret = phy_read(phydev, MII_CTRL1000);
if (ret < 0)
return ret;
if (ret & CTL1000_AS_MASTER)
phydev->master_slave_get = MASTER_SLAVE_CFG_MASTER_FORCE;
else
phydev->master_slave_get = MASTER_SLAVE_CFG_SLAVE_FORCE;
ret = phy_read(phydev, MII_STAT1000);
if (ret < 0)
return ret;
if (ret & LPA_1000MSRES)
phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER;
else
phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE;
return 0;
}
static int rtl9000a_ack_interrupt(struct phy_device *phydev)
{
int err;
err = phy_read(phydev, RTL8211F_INSR);
return (err < 0) ? err : 0;
}
static int rtl9000a_config_intr(struct phy_device *phydev)
{
u16 val;
int err;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
err = rtl9000a_ack_interrupt(phydev);
if (err)
return err;
val = (u16)~RTL9000A_GINMR_LINK_STATUS;
err = phy_write_paged(phydev, 0xa42, RTL9000A_GINMR, val);
} else {
val = ~0;
err = phy_write_paged(phydev, 0xa42, RTL9000A_GINMR, val);
if (err)
return err;
err = rtl9000a_ack_interrupt(phydev);
}
return phy_write_paged(phydev, 0xa42, RTL9000A_GINMR, val);
}
static irqreturn_t rtl9000a_handle_interrupt(struct phy_device *phydev)
{
int irq_status;
irq_status = phy_read(phydev, RTL8211F_INSR);
if (irq_status < 0) {
phy_error(phydev);
return IRQ_NONE;
}
if (!(irq_status & RTL8211F_INER_LINK_STATUS))
return IRQ_NONE;
phy_trigger_machine(phydev);
return IRQ_HANDLED;
}
static struct phy_driver realtek_drvs[] = {
{
PHY_ID_MATCH_EXACT(0x00008201),
.name = "RTL8201CP Ethernet",
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
}, {
PHY_ID_MATCH_EXACT(0x001cc816),
.name = "RTL8201F Fast Ethernet",
.config_intr = &rtl8201_config_intr,
.handle_interrupt = rtl8201_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
}, {
PHY_ID_MATCH_MODEL(0x001cc880),
.name = "RTL8208 Fast Ethernet",
.read_mmd = genphy_read_mmd_unsupported,
.write_mmd = genphy_write_mmd_unsupported,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
}, {
PHY_ID_MATCH_EXACT(0x001cc910),
.name = "RTL8211 Gigabit Ethernet",
.config_aneg = rtl8211_config_aneg,
.read_mmd = &genphy_read_mmd_unsupported,
.write_mmd = &genphy_write_mmd_unsupported,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
}, {
PHY_ID_MATCH_EXACT(0x001cc912),
.name = "RTL8211B Gigabit Ethernet",
.config_intr = &rtl8211b_config_intr,
.handle_interrupt = rtl821x_handle_interrupt,
.read_mmd = &genphy_read_mmd_unsupported,
.write_mmd = &genphy_write_mmd_unsupported,
.suspend = rtl8211b_suspend,
.resume = rtl8211b_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
}, {
PHY_ID_MATCH_EXACT(0x001cc913),
.name = "RTL8211C Gigabit Ethernet",
.config_init = rtl8211c_config_init,
.read_mmd = &genphy_read_mmd_unsupported,
.write_mmd = &genphy_write_mmd_unsupported,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
}, {
PHY_ID_MATCH_EXACT(0x001cc914),
.name = "RTL8211DN Gigabit Ethernet",
.config_intr = rtl8211e_config_intr,
.handle_interrupt = rtl821x_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
}, {
PHY_ID_MATCH_EXACT(0x001cc915),
.name = "RTL8211E Gigabit Ethernet",
.config_init = &rtl8211e_config_init,
.config_intr = &rtl8211e_config_intr,
.handle_interrupt = rtl821x_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
}, {
PHY_ID_MATCH_EXACT(0x001cc916),
.name = "RTL8211F Gigabit Ethernet",
.probe = rtl821x_probe,
.config_init = &rtl8211f_config_init,
.read_status = rtlgen_read_status,
.config_intr = &rtl8211f_config_intr,
.handle_interrupt = rtl8211f_handle_interrupt,
.suspend = rtl821x_suspend,
.resume = rtl821x_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
.flags = PHY_ALWAYS_CALL_SUSPEND,
}, {
PHY_ID_MATCH_EXACT(RTL_8211FVD_PHYID),
.name = "RTL8211F-VD Gigabit Ethernet",
.probe = rtl821x_probe,
.config_init = &rtl8211f_config_init,
.read_status = rtlgen_read_status,
.config_intr = &rtl8211f_config_intr,
.handle_interrupt = rtl8211f_handle_interrupt,
.suspend = rtl821x_suspend,
.resume = rtl821x_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
.flags = PHY_ALWAYS_CALL_SUSPEND,
}, {
.name = "Generic FE-GE Realtek PHY",
.match_phy_device = rtlgen_match_phy_device,
.read_status = rtlgen_read_status,
.suspend = genphy_suspend,
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
.read_mmd = rtlgen_read_mmd,
.write_mmd = rtlgen_write_mmd,
}, {
.name = "RTL8226 2.5Gbps PHY",
.match_phy_device = rtl8226_match_phy_device,
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.read_status = rtl822x_read_status,
.suspend = genphy_suspend,
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
.read_mmd = rtl822x_read_mmd,
.write_mmd = rtl822x_write_mmd,
}, {
PHY_ID_MATCH_EXACT(0x001cc840),
.name = "RTL8226B_RTL8221B 2.5Gbps PHY",
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.read_status = rtl822x_read_status,
.suspend = genphy_suspend,
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
.read_mmd = rtl822x_read_mmd,
.write_mmd = rtl822x_write_mmd,
}, {
PHY_ID_MATCH_EXACT(0x001cc838),
.name = "RTL8226-CG 2.5Gbps PHY",
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.read_status = rtl822x_read_status,
.suspend = genphy_suspend,
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
}, {
PHY_ID_MATCH_EXACT(0x001cc848),
.name = "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY",
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.read_status = rtl822x_read_status,
.suspend = genphy_suspend,
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
}, {
PHY_ID_MATCH_EXACT(0x001cc849),
.name = "RTL8221B-VB-CG 2.5Gbps PHY",
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.read_status = rtl822x_read_status,
.suspend = genphy_suspend,
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
}, {
PHY_ID_MATCH_EXACT(0x001cc84a),
.name = "RTL8221B-VM-CG 2.5Gbps PHY",
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.read_status = rtl822x_read_status,
.suspend = genphy_suspend,
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
}, {
PHY_ID_MATCH_EXACT(0x001cc961),
.name = "RTL8366RB Gigabit Ethernet",
.config_init = &rtl8366rb_config_init,
/* These interrupts are handled by the irq controller
* embedded inside the RTL8366RB, they get unmasked when the
* irq is requested and ACKed by reading the status register,
* which is done by the irqchip code.
*/
.config_intr = genphy_no_config_intr,
.handle_interrupt = genphy_handle_interrupt_no_ack,
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
PHY_ID_MATCH_EXACT(0x001ccb00),
.name = "RTL9000AA_RTL9000AN Ethernet",
.features = PHY_BASIC_T1_FEATURES,
.config_init = rtl9000a_config_init,
.config_aneg = rtl9000a_config_aneg,
.read_status = rtl9000a_read_status,
.config_intr = rtl9000a_config_intr,
.handle_interrupt = rtl9000a_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
}, {
PHY_ID_MATCH_EXACT(0x001cc942),
.name = "RTL8365MB-VC Gigabit Ethernet",
/* Interrupt handling analogous to RTL8366RB */
.config_intr = genphy_no_config_intr,
.handle_interrupt = genphy_handle_interrupt_no_ack,
.suspend = genphy_suspend,
.resume = genphy_resume,
},
};
module_phy_driver(realtek_drvs);
static const struct mdio_device_id __maybe_unused realtek_tbl[] = {
{ PHY_ID_MATCH_VENDOR(0x001cc800) },
{ }
};
MODULE_DEVICE_TABLE(mdio, realtek_tbl);