blob: 573109ca5b79902c5b396f98f58c3e87f41cc6bd [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget
*
* dev.c - Individual device/gadget management (ie, a port = a gadget)
*
* Copyright 2017 IBM Corporation
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/list.h>
#include <linux/interrupt.h>
#include <linux/proc_fs.h>
#include <linux/prefetch.h>
#include <linux/clk.h>
#include <linux/usb/gadget.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/dma-mapping.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include "vhub.h"
void ast_vhub_dev_irq(struct ast_vhub_dev *d)
{
u32 istat = readl(d->regs + AST_VHUB_DEV_ISR);
writel(istat, d->regs + AST_VHUB_DEV_ISR);
if (istat & VHUV_DEV_IRQ_EP0_IN_ACK_STALL)
ast_vhub_ep0_handle_ack(&d->ep0, true);
if (istat & VHUV_DEV_IRQ_EP0_OUT_ACK_STALL)
ast_vhub_ep0_handle_ack(&d->ep0, false);
if (istat & VHUV_DEV_IRQ_EP0_SETUP)
ast_vhub_ep0_handle_setup(&d->ep0);
}
static void ast_vhub_dev_enable(struct ast_vhub_dev *d)
{
u32 reg, hmsk, i;
if (d->enabled)
return;
/* Cleanup EP0 state */
ast_vhub_reset_ep0(d);
/* Enable device and its EP0 interrupts */
reg = VHUB_DEV_EN_ENABLE_PORT |
VHUB_DEV_EN_EP0_IN_ACK_IRQEN |
VHUB_DEV_EN_EP0_OUT_ACK_IRQEN |
VHUB_DEV_EN_EP0_SETUP_IRQEN;
if (d->gadget.speed == USB_SPEED_HIGH)
reg |= VHUB_DEV_EN_SPEED_SEL_HIGH;
writel(reg, d->regs + AST_VHUB_DEV_EN_CTRL);
/* Enable device interrupt in the hub as well */
hmsk = VHUB_IRQ_DEVICE1 << d->index;
reg = readl(d->vhub->regs + AST_VHUB_IER);
reg |= hmsk;
writel(reg, d->vhub->regs + AST_VHUB_IER);
/* Set EP0 DMA buffer address */
writel(d->ep0.buf_dma, d->regs + AST_VHUB_DEV_EP0_DATA);
/* Clear stall on all EPs */
for (i = 0; i < d->max_epns; i++) {
struct ast_vhub_ep *ep = d->epns[i];
if (ep && (ep->epn.stalled || ep->epn.wedged)) {
ep->epn.stalled = false;
ep->epn.wedged = false;
ast_vhub_update_epn_stall(ep);
}
}
/* Additional cleanups */
d->wakeup_en = false;
d->enabled = true;
}
static void ast_vhub_dev_disable(struct ast_vhub_dev *d)
{
u32 reg, hmsk;
if (!d->enabled)
return;
/* Disable device interrupt in the hub */
hmsk = VHUB_IRQ_DEVICE1 << d->index;
reg = readl(d->vhub->regs + AST_VHUB_IER);
reg &= ~hmsk;
writel(reg, d->vhub->regs + AST_VHUB_IER);
/* Then disable device */
writel(0, d->regs + AST_VHUB_DEV_EN_CTRL);
d->gadget.speed = USB_SPEED_UNKNOWN;
d->enabled = false;
}
static int ast_vhub_dev_feature(struct ast_vhub_dev *d,
u16 wIndex, u16 wValue,
bool is_set)
{
u32 val;
DDBG(d, "%s_FEATURE(dev val=%02x)\n",
is_set ? "SET" : "CLEAR", wValue);
if (wValue == USB_DEVICE_REMOTE_WAKEUP) {
d->wakeup_en = is_set;
return std_req_complete;
}
if (wValue == USB_DEVICE_TEST_MODE) {
val = readl(d->vhub->regs + AST_VHUB_CTRL);
val &= ~GENMASK(10, 8);
val |= VHUB_CTRL_SET_TEST_MODE((wIndex >> 8) & 0x7);
writel(val, d->vhub->regs + AST_VHUB_CTRL);
return std_req_complete;
}
return std_req_driver;
}
static int ast_vhub_ep_feature(struct ast_vhub_dev *d,
u16 wIndex, u16 wValue, bool is_set)
{
struct ast_vhub_ep *ep;
int ep_num;
ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK;
DDBG(d, "%s_FEATURE(ep%d val=%02x)\n",
is_set ? "SET" : "CLEAR", ep_num, wValue);
if (ep_num == 0)
return std_req_complete;
if (ep_num >= d->max_epns || !d->epns[ep_num - 1])
return std_req_stall;
if (wValue != USB_ENDPOINT_HALT)
return std_req_driver;
ep = d->epns[ep_num - 1];
if (WARN_ON(!ep))
return std_req_stall;
if (!ep->epn.enabled || !ep->ep.desc || ep->epn.is_iso ||
ep->epn.is_in != !!(wIndex & USB_DIR_IN))
return std_req_stall;
DDBG(d, "%s stall on EP %d\n",
is_set ? "setting" : "clearing", ep_num);
ep->epn.stalled = is_set;
ast_vhub_update_epn_stall(ep);
return std_req_complete;
}
static int ast_vhub_dev_status(struct ast_vhub_dev *d,
u16 wIndex, u16 wValue)
{
u8 st0;
DDBG(d, "GET_STATUS(dev)\n");
st0 = d->gadget.is_selfpowered << USB_DEVICE_SELF_POWERED;
if (d->wakeup_en)
st0 |= 1 << USB_DEVICE_REMOTE_WAKEUP;
return ast_vhub_simple_reply(&d->ep0, st0, 0);
}
static int ast_vhub_ep_status(struct ast_vhub_dev *d,
u16 wIndex, u16 wValue)
{
int ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK;
struct ast_vhub_ep *ep;
u8 st0 = 0;
DDBG(d, "GET_STATUS(ep%d)\n", ep_num);
if (ep_num >= d->max_epns)
return std_req_stall;
if (ep_num != 0) {
ep = d->epns[ep_num - 1];
if (!ep)
return std_req_stall;
if (!ep->epn.enabled || !ep->ep.desc || ep->epn.is_iso ||
ep->epn.is_in != !!(wIndex & USB_DIR_IN))
return std_req_stall;
if (ep->epn.stalled)
st0 |= 1 << USB_ENDPOINT_HALT;
}
return ast_vhub_simple_reply(&d->ep0, st0, 0);
}
static void ast_vhub_dev_set_address(struct ast_vhub_dev *d, u8 addr)
{
u32 reg;
DDBG(d, "SET_ADDRESS: Got address %x\n", addr);
reg = readl(d->regs + AST_VHUB_DEV_EN_CTRL);
reg &= ~VHUB_DEV_EN_ADDR_MASK;
reg |= VHUB_DEV_EN_SET_ADDR(addr);
writel(reg, d->regs + AST_VHUB_DEV_EN_CTRL);
}
int ast_vhub_std_dev_request(struct ast_vhub_ep *ep,
struct usb_ctrlrequest *crq)
{
struct ast_vhub_dev *d = ep->dev;
u16 wValue, wIndex;
/* No driver, we shouldn't be enabled ... */
if (!d->driver || !d->enabled) {
EPDBG(ep,
"Device is wrong state driver=%p enabled=%d\n",
d->driver, d->enabled);
return std_req_stall;
}
/*
* Note: we used to reject/stall requests while suspended,
* we don't do that anymore as we seem to have cases of
* mass storage getting very upset.
*/
/* First packet, grab speed */
if (d->gadget.speed == USB_SPEED_UNKNOWN) {
d->gadget.speed = ep->vhub->speed;
if (d->gadget.speed > d->driver->max_speed)
d->gadget.speed = d->driver->max_speed;
DDBG(d, "fist packet, captured speed %d\n",
d->gadget.speed);
}
wValue = le16_to_cpu(crq->wValue);
wIndex = le16_to_cpu(crq->wIndex);
switch ((crq->bRequestType << 8) | crq->bRequest) {
/* SET_ADDRESS */
case DeviceOutRequest | USB_REQ_SET_ADDRESS:
ast_vhub_dev_set_address(d, wValue);
return std_req_complete;
/* GET_STATUS */
case DeviceRequest | USB_REQ_GET_STATUS:
return ast_vhub_dev_status(d, wIndex, wValue);
case InterfaceRequest | USB_REQ_GET_STATUS:
return ast_vhub_simple_reply(ep, 0, 0);
case EndpointRequest | USB_REQ_GET_STATUS:
return ast_vhub_ep_status(d, wIndex, wValue);
/* SET/CLEAR_FEATURE */
case DeviceOutRequest | USB_REQ_SET_FEATURE:
return ast_vhub_dev_feature(d, wIndex, wValue, true);
case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
return ast_vhub_dev_feature(d, wIndex, wValue, false);
case EndpointOutRequest | USB_REQ_SET_FEATURE:
return ast_vhub_ep_feature(d, wIndex, wValue, true);
case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
return ast_vhub_ep_feature(d, wIndex, wValue, false);
}
return std_req_driver;
}
static int ast_vhub_udc_wakeup(struct usb_gadget* gadget)
{
struct ast_vhub_dev *d = to_ast_dev(gadget);
unsigned long flags;
int rc = -EINVAL;
spin_lock_irqsave(&d->vhub->lock, flags);
if (!d->wakeup_en)
goto err;
DDBG(d, "Device initiated wakeup\n");
/* Wakeup the host */
ast_vhub_hub_wake_all(d->vhub);
rc = 0;
err:
spin_unlock_irqrestore(&d->vhub->lock, flags);
return rc;
}
static int ast_vhub_udc_get_frame(struct usb_gadget* gadget)
{
struct ast_vhub_dev *d = to_ast_dev(gadget);
return (readl(d->vhub->regs + AST_VHUB_USBSTS) >> 16) & 0x7ff;
}
static void ast_vhub_dev_nuke(struct ast_vhub_dev *d)
{
unsigned int i;
for (i = 0; i < d->max_epns; i++) {
if (!d->epns[i])
continue;
ast_vhub_nuke(d->epns[i], -ESHUTDOWN);
}
}
static int ast_vhub_udc_pullup(struct usb_gadget* gadget, int on)
{
struct ast_vhub_dev *d = to_ast_dev(gadget);
unsigned long flags;
spin_lock_irqsave(&d->vhub->lock, flags);
DDBG(d, "pullup(%d)\n", on);
/* Mark disconnected in the hub */
ast_vhub_device_connect(d->vhub, d->index, on);
/*
* If enabled, nuke all requests if any (there shouldn't be)
* and disable the port. This will clear the address too.
*/
if (d->enabled) {
ast_vhub_dev_nuke(d);
ast_vhub_dev_disable(d);
}
spin_unlock_irqrestore(&d->vhub->lock, flags);
return 0;
}
static int ast_vhub_udc_start(struct usb_gadget *gadget,
struct usb_gadget_driver *driver)
{
struct ast_vhub_dev *d = to_ast_dev(gadget);
unsigned long flags;
spin_lock_irqsave(&d->vhub->lock, flags);
DDBG(d, "start\n");
/* We don't do much more until the hub enables us */
d->driver = driver;
d->gadget.is_selfpowered = 1;
spin_unlock_irqrestore(&d->vhub->lock, flags);
return 0;
}
static struct usb_ep *ast_vhub_udc_match_ep(struct usb_gadget *gadget,
struct usb_endpoint_descriptor *desc,
struct usb_ss_ep_comp_descriptor *ss)
{
struct ast_vhub_dev *d = to_ast_dev(gadget);
struct ast_vhub_ep *ep;
struct usb_ep *u_ep;
unsigned int max, addr, i;
DDBG(d, "Match EP type %d\n", usb_endpoint_type(desc));
/*
* First we need to look for an existing unclaimed EP as another
* configuration may have already associated a bunch of EPs with
* this gadget. This duplicates the code in usb_ep_autoconfig_ss()
* unfortunately.
*/
list_for_each_entry(u_ep, &gadget->ep_list, ep_list) {
if (usb_gadget_ep_match_desc(gadget, u_ep, desc, ss)) {
DDBG(d, " -> using existing EP%d\n",
to_ast_ep(u_ep)->d_idx);
return u_ep;
}
}
/*
* We didn't find one, we need to grab one from the pool.
*
* First let's do some sanity checking
*/
switch(usb_endpoint_type(desc)) {
case USB_ENDPOINT_XFER_CONTROL:
/* Only EP0 can be a control endpoint */
return NULL;
case USB_ENDPOINT_XFER_ISOC:
/* ISO: limit 1023 bytes full speed, 1024 high/super speed */
if (gadget_is_dualspeed(gadget))
max = 1024;
else
max = 1023;
break;
case USB_ENDPOINT_XFER_BULK:
if (gadget_is_dualspeed(gadget))
max = 512;
else
max = 64;
break;
case USB_ENDPOINT_XFER_INT:
if (gadget_is_dualspeed(gadget))
max = 1024;
else
max = 64;
break;
}
if (usb_endpoint_maxp(desc) > max)
return NULL;
/*
* Find a free EP address for that device. We can't
* let the generic code assign these as it would
* create overlapping numbers for IN and OUT which
* we don't support, so also create a suitable name
* that will allow the generic code to use our
* assigned address.
*/
for (i = 0; i < d->max_epns; i++)
if (d->epns[i] == NULL)
break;
if (i >= d->max_epns)
return NULL;
addr = i + 1;
/*
* Now grab an EP from the shared pool and associate
* it with our device
*/
ep = ast_vhub_alloc_epn(d, addr);
if (!ep)
return NULL;
DDBG(d, "Allocated epn#%d for port EP%d\n",
ep->epn.g_idx, addr);
return &ep->ep;
}
static int ast_vhub_udc_stop(struct usb_gadget *gadget)
{
struct ast_vhub_dev *d = to_ast_dev(gadget);
unsigned long flags;
spin_lock_irqsave(&d->vhub->lock, flags);
DDBG(d, "stop\n");
d->driver = NULL;
d->gadget.speed = USB_SPEED_UNKNOWN;
ast_vhub_dev_nuke(d);
if (d->enabled)
ast_vhub_dev_disable(d);
spin_unlock_irqrestore(&d->vhub->lock, flags);
return 0;
}
static const struct usb_gadget_ops ast_vhub_udc_ops = {
.get_frame = ast_vhub_udc_get_frame,
.wakeup = ast_vhub_udc_wakeup,
.pullup = ast_vhub_udc_pullup,
.udc_start = ast_vhub_udc_start,
.udc_stop = ast_vhub_udc_stop,
.match_ep = ast_vhub_udc_match_ep,
};
void ast_vhub_dev_suspend(struct ast_vhub_dev *d)
{
if (d->driver && d->driver->suspend) {
spin_unlock(&d->vhub->lock);
d->driver->suspend(&d->gadget);
spin_lock(&d->vhub->lock);
}
}
void ast_vhub_dev_resume(struct ast_vhub_dev *d)
{
if (d->driver && d->driver->resume) {
spin_unlock(&d->vhub->lock);
d->driver->resume(&d->gadget);
spin_lock(&d->vhub->lock);
}
}
void ast_vhub_dev_reset(struct ast_vhub_dev *d)
{
/* No driver, just disable the device and return */
if (!d->driver) {
ast_vhub_dev_disable(d);
return;
}
/* If the port isn't enabled, just enable it */
if (!d->enabled) {
DDBG(d, "Reset of disabled device, enabling...\n");
ast_vhub_dev_enable(d);
} else {
DDBG(d, "Reset of enabled device, resetting...\n");
spin_unlock(&d->vhub->lock);
usb_gadget_udc_reset(&d->gadget, d->driver);
spin_lock(&d->vhub->lock);
/*
* Disable and maybe re-enable HW, this will clear the address
* and speed setting.
*/
ast_vhub_dev_disable(d);
ast_vhub_dev_enable(d);
}
}
void ast_vhub_del_dev(struct ast_vhub_dev *d)
{
unsigned long flags;
spin_lock_irqsave(&d->vhub->lock, flags);
if (!d->registered) {
spin_unlock_irqrestore(&d->vhub->lock, flags);
return;
}
d->registered = false;
spin_unlock_irqrestore(&d->vhub->lock, flags);
usb_del_gadget_udc(&d->gadget);
device_unregister(d->port_dev);
kfree(d->epns);
}
static void ast_vhub_dev_release(struct device *dev)
{
kfree(dev);
}
int ast_vhub_init_dev(struct ast_vhub *vhub, unsigned int idx)
{
struct ast_vhub_dev *d = &vhub->ports[idx].dev;
struct device *parent = &vhub->pdev->dev;
int rc;
d->vhub = vhub;
d->index = idx;
d->name = devm_kasprintf(parent, GFP_KERNEL, "port%d", idx+1);
d->regs = vhub->regs + 0x100 + 0x10 * idx;
ast_vhub_init_ep0(vhub, &d->ep0, d);
/*
* A USB device can have up to 30 endpoints besides control
* endpoint 0.
*/
d->max_epns = min_t(u32, vhub->max_epns, 30);
d->epns = kcalloc(d->max_epns, sizeof(*d->epns), GFP_KERNEL);
if (!d->epns)
return -ENOMEM;
/*
* The UDC core really needs us to have separate and uniquely
* named "parent" devices for each port so we create a sub device
* here for that purpose
*/
d->port_dev = kzalloc(sizeof(struct device), GFP_KERNEL);
if (!d->port_dev) {
rc = -ENOMEM;
goto fail_alloc;
}
device_initialize(d->port_dev);
d->port_dev->release = ast_vhub_dev_release;
d->port_dev->parent = parent;
dev_set_name(d->port_dev, "%s:p%d", dev_name(parent), idx + 1);
rc = device_add(d->port_dev);
if (rc)
goto fail_add;
/* Populate gadget */
INIT_LIST_HEAD(&d->gadget.ep_list);
d->gadget.ops = &ast_vhub_udc_ops;
d->gadget.ep0 = &d->ep0.ep;
d->gadget.name = KBUILD_MODNAME;
if (vhub->force_usb1)
d->gadget.max_speed = USB_SPEED_FULL;
else
d->gadget.max_speed = USB_SPEED_HIGH;
d->gadget.speed = USB_SPEED_UNKNOWN;
d->gadget.dev.of_node = vhub->pdev->dev.of_node;
d->gadget.dev.of_node_reused = true;
rc = usb_add_gadget_udc(d->port_dev, &d->gadget);
if (rc != 0)
goto fail_udc;
d->registered = true;
return 0;
fail_udc:
device_del(d->port_dev);
fail_add:
put_device(d->port_dev);
fail_alloc:
kfree(d->epns);
return rc;
}