| /* |
| * Freescale ALSA SoC Digital Audio Interface (SAI) driver. |
| * |
| * Copyright 2012-2015 Freescale Semiconductor, Inc. |
| * |
| * This program is free software, you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation, either version 2 of the License, or(at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/dmaengine.h> |
| #include <linux/module.h> |
| #include <linux/of_address.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| #include <linux/time.h> |
| #include <sound/core.h> |
| #include <sound/dmaengine_pcm.h> |
| #include <sound/pcm_params.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> |
| |
| #include "fsl_sai.h" |
| #include "imx-pcm.h" |
| |
| #define FSL_SAI_FLAGS (FSL_SAI_CSR_SEIE |\ |
| FSL_SAI_CSR_FEIE) |
| |
| static const unsigned int fsl_sai_rates[] = { |
| 8000, 11025, 12000, 16000, 22050, |
| 24000, 32000, 44100, 48000, 64000, |
| 88200, 96000, 176400, 192000 |
| }; |
| |
| static const struct snd_pcm_hw_constraint_list fsl_sai_rate_constraints = { |
| .count = ARRAY_SIZE(fsl_sai_rates), |
| .list = fsl_sai_rates, |
| }; |
| |
| static irqreturn_t fsl_sai_isr(int irq, void *devid) |
| { |
| struct fsl_sai *sai = (struct fsl_sai *)devid; |
| struct device *dev = &sai->pdev->dev; |
| u32 flags, xcsr, mask; |
| bool irq_none = true; |
| |
| /* |
| * Both IRQ status bits and IRQ mask bits are in the xCSR but |
| * different shifts. And we here create a mask only for those |
| * IRQs that we activated. |
| */ |
| mask = (FSL_SAI_FLAGS >> FSL_SAI_CSR_xIE_SHIFT) << FSL_SAI_CSR_xF_SHIFT; |
| |
| /* Tx IRQ */ |
| regmap_read(sai->regmap, FSL_SAI_TCSR, &xcsr); |
| flags = xcsr & mask; |
| |
| if (flags) |
| irq_none = false; |
| else |
| goto irq_rx; |
| |
| if (flags & FSL_SAI_CSR_WSF) |
| dev_dbg(dev, "isr: Start of Tx word detected\n"); |
| |
| if (flags & FSL_SAI_CSR_SEF) |
| dev_warn(dev, "isr: Tx Frame sync error detected\n"); |
| |
| if (flags & FSL_SAI_CSR_FEF) { |
| dev_warn(dev, "isr: Transmit underrun detected\n"); |
| /* FIFO reset for safety */ |
| xcsr |= FSL_SAI_CSR_FR; |
| } |
| |
| if (flags & FSL_SAI_CSR_FWF) |
| dev_dbg(dev, "isr: Enabled transmit FIFO is empty\n"); |
| |
| if (flags & FSL_SAI_CSR_FRF) |
| dev_dbg(dev, "isr: Transmit FIFO watermark has been reached\n"); |
| |
| flags &= FSL_SAI_CSR_xF_W_MASK; |
| xcsr &= ~FSL_SAI_CSR_xF_MASK; |
| |
| if (flags) |
| regmap_write(sai->regmap, FSL_SAI_TCSR, flags | xcsr); |
| |
| irq_rx: |
| /* Rx IRQ */ |
| regmap_read(sai->regmap, FSL_SAI_RCSR, &xcsr); |
| flags = xcsr & mask; |
| |
| if (flags) |
| irq_none = false; |
| else |
| goto out; |
| |
| if (flags & FSL_SAI_CSR_WSF) |
| dev_dbg(dev, "isr: Start of Rx word detected\n"); |
| |
| if (flags & FSL_SAI_CSR_SEF) |
| dev_warn(dev, "isr: Rx Frame sync error detected\n"); |
| |
| if (flags & FSL_SAI_CSR_FEF) { |
| dev_warn(dev, "isr: Receive overflow detected\n"); |
| /* FIFO reset for safety */ |
| xcsr |= FSL_SAI_CSR_FR; |
| } |
| |
| if (flags & FSL_SAI_CSR_FWF) |
| dev_dbg(dev, "isr: Enabled receive FIFO is full\n"); |
| |
| if (flags & FSL_SAI_CSR_FRF) |
| dev_dbg(dev, "isr: Receive FIFO watermark has been reached\n"); |
| |
| flags &= FSL_SAI_CSR_xF_W_MASK; |
| xcsr &= ~FSL_SAI_CSR_xF_MASK; |
| |
| if (flags) |
| regmap_write(sai->regmap, FSL_SAI_RCSR, flags | xcsr); |
| |
| out: |
| if (irq_none) |
| return IRQ_NONE; |
| else |
| return IRQ_HANDLED; |
| } |
| |
| static int fsl_sai_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, u32 tx_mask, |
| u32 rx_mask, int slots, int slot_width) |
| { |
| struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai); |
| |
| sai->slots = slots; |
| sai->slot_width = slot_width; |
| |
| return 0; |
| } |
| |
| static int fsl_sai_set_dai_sysclk_tr(struct snd_soc_dai *cpu_dai, |
| int clk_id, unsigned int freq, int fsl_dir) |
| { |
| struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai); |
| bool tx = fsl_dir == FSL_FMT_TRANSMITTER; |
| u32 val_cr2 = 0; |
| |
| switch (clk_id) { |
| case FSL_SAI_CLK_BUS: |
| val_cr2 |= FSL_SAI_CR2_MSEL_BUS; |
| break; |
| case FSL_SAI_CLK_MAST1: |
| val_cr2 |= FSL_SAI_CR2_MSEL_MCLK1; |
| break; |
| case FSL_SAI_CLK_MAST2: |
| val_cr2 |= FSL_SAI_CR2_MSEL_MCLK2; |
| break; |
| case FSL_SAI_CLK_MAST3: |
| val_cr2 |= FSL_SAI_CR2_MSEL_MCLK3; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx), |
| FSL_SAI_CR2_MSEL_MASK, val_cr2); |
| |
| return 0; |
| } |
| |
| static int fsl_sai_set_dai_sysclk(struct snd_soc_dai *cpu_dai, |
| int clk_id, unsigned int freq, int dir) |
| { |
| int ret; |
| |
| if (dir == SND_SOC_CLOCK_IN) |
| return 0; |
| |
| ret = fsl_sai_set_dai_sysclk_tr(cpu_dai, clk_id, freq, |
| FSL_FMT_TRANSMITTER); |
| if (ret) { |
| dev_err(cpu_dai->dev, "Cannot set tx sysclk: %d\n", ret); |
| return ret; |
| } |
| |
| ret = fsl_sai_set_dai_sysclk_tr(cpu_dai, clk_id, freq, |
| FSL_FMT_RECEIVER); |
| if (ret) |
| dev_err(cpu_dai->dev, "Cannot set rx sysclk: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static int fsl_sai_set_dai_fmt_tr(struct snd_soc_dai *cpu_dai, |
| unsigned int fmt, int fsl_dir) |
| { |
| struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai); |
| bool tx = fsl_dir == FSL_FMT_TRANSMITTER; |
| u32 val_cr2 = 0, val_cr4 = 0; |
| |
| if (!sai->is_lsb_first) |
| val_cr4 |= FSL_SAI_CR4_MF; |
| |
| /* DAI mode */ |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| case SND_SOC_DAIFMT_I2S: |
| /* |
| * Frame low, 1clk before data, one word length for frame sync, |
| * frame sync starts one serial clock cycle earlier, |
| * that is, together with the last bit of the previous |
| * data word. |
| */ |
| val_cr2 |= FSL_SAI_CR2_BCP; |
| val_cr4 |= FSL_SAI_CR4_FSE | FSL_SAI_CR4_FSP; |
| break; |
| case SND_SOC_DAIFMT_LEFT_J: |
| /* |
| * Frame high, one word length for frame sync, |
| * frame sync asserts with the first bit of the frame. |
| */ |
| val_cr2 |= FSL_SAI_CR2_BCP; |
| break; |
| case SND_SOC_DAIFMT_DSP_A: |
| /* |
| * Frame high, 1clk before data, one bit for frame sync, |
| * frame sync starts one serial clock cycle earlier, |
| * that is, together with the last bit of the previous |
| * data word. |
| */ |
| val_cr2 |= FSL_SAI_CR2_BCP; |
| val_cr4 |= FSL_SAI_CR4_FSE; |
| sai->is_dsp_mode = true; |
| break; |
| case SND_SOC_DAIFMT_DSP_B: |
| /* |
| * Frame high, one bit for frame sync, |
| * frame sync asserts with the first bit of the frame. |
| */ |
| val_cr2 |= FSL_SAI_CR2_BCP; |
| sai->is_dsp_mode = true; |
| break; |
| case SND_SOC_DAIFMT_RIGHT_J: |
| /* To be done */ |
| default: |
| return -EINVAL; |
| } |
| |
| /* DAI clock inversion */ |
| switch (fmt & SND_SOC_DAIFMT_INV_MASK) { |
| case SND_SOC_DAIFMT_IB_IF: |
| /* Invert both clocks */ |
| val_cr2 ^= FSL_SAI_CR2_BCP; |
| val_cr4 ^= FSL_SAI_CR4_FSP; |
| break; |
| case SND_SOC_DAIFMT_IB_NF: |
| /* Invert bit clock */ |
| val_cr2 ^= FSL_SAI_CR2_BCP; |
| break; |
| case SND_SOC_DAIFMT_NB_IF: |
| /* Invert frame clock */ |
| val_cr4 ^= FSL_SAI_CR4_FSP; |
| break; |
| case SND_SOC_DAIFMT_NB_NF: |
| /* Nothing to do for both normal cases */ |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* DAI clock master masks */ |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBS_CFS: |
| val_cr2 |= FSL_SAI_CR2_BCD_MSTR; |
| val_cr4 |= FSL_SAI_CR4_FSD_MSTR; |
| break; |
| case SND_SOC_DAIFMT_CBM_CFM: |
| sai->is_slave_mode = true; |
| break; |
| case SND_SOC_DAIFMT_CBS_CFM: |
| val_cr2 |= FSL_SAI_CR2_BCD_MSTR; |
| break; |
| case SND_SOC_DAIFMT_CBM_CFS: |
| val_cr4 |= FSL_SAI_CR4_FSD_MSTR; |
| sai->is_slave_mode = true; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx), |
| FSL_SAI_CR2_BCP | FSL_SAI_CR2_BCD_MSTR, val_cr2); |
| regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx), |
| FSL_SAI_CR4_MF | FSL_SAI_CR4_FSE | |
| FSL_SAI_CR4_FSP | FSL_SAI_CR4_FSD_MSTR, val_cr4); |
| |
| return 0; |
| } |
| |
| static int fsl_sai_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) |
| { |
| int ret; |
| |
| ret = fsl_sai_set_dai_fmt_tr(cpu_dai, fmt, FSL_FMT_TRANSMITTER); |
| if (ret) { |
| dev_err(cpu_dai->dev, "Cannot set tx format: %d\n", ret); |
| return ret; |
| } |
| |
| ret = fsl_sai_set_dai_fmt_tr(cpu_dai, fmt, FSL_FMT_RECEIVER); |
| if (ret) |
| dev_err(cpu_dai->dev, "Cannot set rx format: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static int fsl_sai_set_bclk(struct snd_soc_dai *dai, bool tx, u32 freq) |
| { |
| struct fsl_sai *sai = snd_soc_dai_get_drvdata(dai); |
| unsigned long clk_rate; |
| u32 savediv = 0, ratio, savesub = freq; |
| u32 id; |
| int ret = 0; |
| |
| /* Don't apply to slave mode */ |
| if (sai->is_slave_mode) |
| return 0; |
| |
| for (id = 0; id < FSL_SAI_MCLK_MAX; id++) { |
| clk_rate = clk_get_rate(sai->mclk_clk[id]); |
| if (!clk_rate) |
| continue; |
| |
| ratio = clk_rate / freq; |
| |
| ret = clk_rate - ratio * freq; |
| |
| /* |
| * Drop the source that can not be |
| * divided into the required rate. |
| */ |
| if (ret != 0 && clk_rate / ret < 1000) |
| continue; |
| |
| dev_dbg(dai->dev, |
| "ratio %d for freq %dHz based on clock %ldHz\n", |
| ratio, freq, clk_rate); |
| |
| if (ratio % 2 == 0 && ratio >= 2 && ratio <= 512) |
| ratio /= 2; |
| else |
| continue; |
| |
| if (ret < savesub) { |
| savediv = ratio; |
| sai->mclk_id[tx] = id; |
| savesub = ret; |
| } |
| |
| if (ret == 0) |
| break; |
| } |
| |
| if (savediv == 0) { |
| dev_err(dai->dev, "failed to derive required %cx rate: %d\n", |
| tx ? 'T' : 'R', freq); |
| return -EINVAL; |
| } |
| |
| /* |
| * 1) For Asynchronous mode, we must set RCR2 register for capture, and |
| * set TCR2 register for playback. |
| * 2) For Tx sync with Rx clock, we must set RCR2 register for playback |
| * and capture. |
| * 3) For Rx sync with Tx clock, we must set TCR2 register for playback |
| * and capture. |
| * 4) For Tx and Rx are both Synchronous with another SAI, we just |
| * ignore it. |
| */ |
| if ((sai->synchronous[TX] && !sai->synchronous[RX]) || |
| (!tx && !sai->synchronous[RX])) { |
| regmap_update_bits(sai->regmap, FSL_SAI_RCR2, |
| FSL_SAI_CR2_MSEL_MASK, |
| FSL_SAI_CR2_MSEL(sai->mclk_id[tx])); |
| regmap_update_bits(sai->regmap, FSL_SAI_RCR2, |
| FSL_SAI_CR2_DIV_MASK, savediv - 1); |
| } else if ((sai->synchronous[RX] && !sai->synchronous[TX]) || |
| (tx && !sai->synchronous[TX])) { |
| regmap_update_bits(sai->regmap, FSL_SAI_TCR2, |
| FSL_SAI_CR2_MSEL_MASK, |
| FSL_SAI_CR2_MSEL(sai->mclk_id[tx])); |
| regmap_update_bits(sai->regmap, FSL_SAI_TCR2, |
| FSL_SAI_CR2_DIV_MASK, savediv - 1); |
| } |
| |
| dev_dbg(dai->dev, "best fit: clock id=%d, div=%d, deviation =%d\n", |
| sai->mclk_id[tx], savediv, savesub); |
| |
| return 0; |
| } |
| |
| static int fsl_sai_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *cpu_dai) |
| { |
| struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai); |
| bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; |
| unsigned int channels = params_channels(params); |
| u32 word_width = params_width(params); |
| u32 val_cr4 = 0, val_cr5 = 0; |
| u32 slots = (channels == 1) ? 2 : channels; |
| u32 slot_width = word_width; |
| int ret; |
| |
| if (sai->slots) |
| slots = sai->slots; |
| |
| if (sai->slot_width) |
| slot_width = sai->slot_width; |
| |
| if (!sai->is_slave_mode) { |
| ret = fsl_sai_set_bclk(cpu_dai, tx, |
| slots * slot_width * params_rate(params)); |
| if (ret) |
| return ret; |
| |
| /* Do not enable the clock if it is already enabled */ |
| if (!(sai->mclk_streams & BIT(substream->stream))) { |
| ret = clk_prepare_enable(sai->mclk_clk[sai->mclk_id[tx]]); |
| if (ret) |
| return ret; |
| |
| sai->mclk_streams |= BIT(substream->stream); |
| } |
| } |
| |
| if (!sai->is_dsp_mode) |
| val_cr4 |= FSL_SAI_CR4_SYWD(slot_width); |
| |
| val_cr5 |= FSL_SAI_CR5_WNW(slot_width); |
| val_cr5 |= FSL_SAI_CR5_W0W(slot_width); |
| |
| if (sai->is_lsb_first) |
| val_cr5 |= FSL_SAI_CR5_FBT(0); |
| else |
| val_cr5 |= FSL_SAI_CR5_FBT(word_width - 1); |
| |
| val_cr4 |= FSL_SAI_CR4_FRSZ(slots); |
| |
| /* |
| * For SAI master mode, when Tx(Rx) sync with Rx(Tx) clock, Rx(Tx) will |
| * generate bclk and frame clock for Tx(Rx), we should set RCR4(TCR4), |
| * RCR5(TCR5) and RMR(TMR) for playback(capture), or there will be sync |
| * error. |
| */ |
| |
| if (!sai->is_slave_mode) { |
| if (!sai->synchronous[TX] && sai->synchronous[RX] && !tx) { |
| regmap_update_bits(sai->regmap, FSL_SAI_TCR4, |
| FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK, |
| val_cr4); |
| regmap_update_bits(sai->regmap, FSL_SAI_TCR5, |
| FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK | |
| FSL_SAI_CR5_FBT_MASK, val_cr5); |
| regmap_write(sai->regmap, FSL_SAI_TMR, |
| ~0UL - ((1 << channels) - 1)); |
| } else if (!sai->synchronous[RX] && sai->synchronous[TX] && tx) { |
| regmap_update_bits(sai->regmap, FSL_SAI_RCR4, |
| FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK, |
| val_cr4); |
| regmap_update_bits(sai->regmap, FSL_SAI_RCR5, |
| FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK | |
| FSL_SAI_CR5_FBT_MASK, val_cr5); |
| regmap_write(sai->regmap, FSL_SAI_RMR, |
| ~0UL - ((1 << channels) - 1)); |
| } |
| } |
| |
| regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx), |
| FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK, |
| val_cr4); |
| regmap_update_bits(sai->regmap, FSL_SAI_xCR5(tx), |
| FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK | |
| FSL_SAI_CR5_FBT_MASK, val_cr5); |
| regmap_write(sai->regmap, FSL_SAI_xMR(tx), ~0UL - ((1 << channels) - 1)); |
| |
| return 0; |
| } |
| |
| static int fsl_sai_hw_free(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *cpu_dai) |
| { |
| struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai); |
| bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; |
| |
| if (!sai->is_slave_mode && |
| sai->mclk_streams & BIT(substream->stream)) { |
| clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[tx]]); |
| sai->mclk_streams &= ~BIT(substream->stream); |
| } |
| |
| return 0; |
| } |
| |
| |
| static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd, |
| struct snd_soc_dai *cpu_dai) |
| { |
| struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai); |
| bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; |
| u32 xcsr, count = 100; |
| |
| /* |
| * Asynchronous mode: Clear SYNC for both Tx and Rx. |
| * Rx sync with Tx clocks: Clear SYNC for Tx, set it for Rx. |
| * Tx sync with Rx clocks: Clear SYNC for Rx, set it for Tx. |
| */ |
| regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_SYNC, |
| sai->synchronous[TX] ? FSL_SAI_CR2_SYNC : 0); |
| regmap_update_bits(sai->regmap, FSL_SAI_RCR2, FSL_SAI_CR2_SYNC, |
| sai->synchronous[RX] ? FSL_SAI_CR2_SYNC : 0); |
| |
| /* |
| * It is recommended that the transmitter is the last enabled |
| * and the first disabled. |
| */ |
| switch (cmd) { |
| case SNDRV_PCM_TRIGGER_START: |
| case SNDRV_PCM_TRIGGER_RESUME: |
| case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: |
| regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx), |
| FSL_SAI_CSR_FRDE, FSL_SAI_CSR_FRDE); |
| |
| regmap_update_bits(sai->regmap, FSL_SAI_RCSR, |
| FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE); |
| regmap_update_bits(sai->regmap, FSL_SAI_TCSR, |
| FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE); |
| |
| regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx), |
| FSL_SAI_CSR_xIE_MASK, FSL_SAI_FLAGS); |
| break; |
| case SNDRV_PCM_TRIGGER_STOP: |
| case SNDRV_PCM_TRIGGER_SUSPEND: |
| case SNDRV_PCM_TRIGGER_PAUSE_PUSH: |
| regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx), |
| FSL_SAI_CSR_FRDE, 0); |
| regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx), |
| FSL_SAI_CSR_xIE_MASK, 0); |
| |
| /* Check if the opposite FRDE is also disabled */ |
| regmap_read(sai->regmap, FSL_SAI_xCSR(!tx), &xcsr); |
| if (!(xcsr & FSL_SAI_CSR_FRDE)) { |
| /* Disable both directions and reset their FIFOs */ |
| regmap_update_bits(sai->regmap, FSL_SAI_TCSR, |
| FSL_SAI_CSR_TERE, 0); |
| regmap_update_bits(sai->regmap, FSL_SAI_RCSR, |
| FSL_SAI_CSR_TERE, 0); |
| |
| /* TERE will remain set till the end of current frame */ |
| do { |
| udelay(10); |
| regmap_read(sai->regmap, FSL_SAI_xCSR(tx), &xcsr); |
| } while (--count && xcsr & FSL_SAI_CSR_TERE); |
| |
| regmap_update_bits(sai->regmap, FSL_SAI_TCSR, |
| FSL_SAI_CSR_FR, FSL_SAI_CSR_FR); |
| regmap_update_bits(sai->regmap, FSL_SAI_RCSR, |
| FSL_SAI_CSR_FR, FSL_SAI_CSR_FR); |
| |
| /* |
| * For sai master mode, after several open/close sai, |
| * there will be no frame clock, and can't recover |
| * anymore. Add software reset to fix this issue. |
| * This is a hardware bug, and will be fix in the |
| * next sai version. |
| */ |
| if (!sai->is_slave_mode) { |
| /* Software Reset for both Tx and Rx */ |
| regmap_write(sai->regmap, |
| FSL_SAI_TCSR, FSL_SAI_CSR_SR); |
| regmap_write(sai->regmap, |
| FSL_SAI_RCSR, FSL_SAI_CSR_SR); |
| /* Clear SR bit to finish the reset */ |
| regmap_write(sai->regmap, FSL_SAI_TCSR, 0); |
| regmap_write(sai->regmap, FSL_SAI_RCSR, 0); |
| } |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int fsl_sai_startup(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *cpu_dai) |
| { |
| struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai); |
| bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; |
| struct device *dev = &sai->pdev->dev; |
| int ret; |
| |
| ret = clk_prepare_enable(sai->bus_clk); |
| if (ret) { |
| dev_err(dev, "failed to enable bus clock: %d\n", ret); |
| return ret; |
| } |
| |
| regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE, |
| FSL_SAI_CR3_TRCE); |
| |
| ret = snd_pcm_hw_constraint_list(substream->runtime, 0, |
| SNDRV_PCM_HW_PARAM_RATE, &fsl_sai_rate_constraints); |
| |
| return ret; |
| } |
| |
| static void fsl_sai_shutdown(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *cpu_dai) |
| { |
| struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai); |
| bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; |
| |
| regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE, 0); |
| |
| clk_disable_unprepare(sai->bus_clk); |
| } |
| |
| static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = { |
| .set_sysclk = fsl_sai_set_dai_sysclk, |
| .set_fmt = fsl_sai_set_dai_fmt, |
| .set_tdm_slot = fsl_sai_set_dai_tdm_slot, |
| .hw_params = fsl_sai_hw_params, |
| .hw_free = fsl_sai_hw_free, |
| .trigger = fsl_sai_trigger, |
| .startup = fsl_sai_startup, |
| .shutdown = fsl_sai_shutdown, |
| }; |
| |
| static int fsl_sai_dai_probe(struct snd_soc_dai *cpu_dai) |
| { |
| struct fsl_sai *sai = dev_get_drvdata(cpu_dai->dev); |
| |
| /* Software Reset for both Tx and Rx */ |
| regmap_write(sai->regmap, FSL_SAI_TCSR, FSL_SAI_CSR_SR); |
| regmap_write(sai->regmap, FSL_SAI_RCSR, FSL_SAI_CSR_SR); |
| /* Clear SR bit to finish the reset */ |
| regmap_write(sai->regmap, FSL_SAI_TCSR, 0); |
| regmap_write(sai->regmap, FSL_SAI_RCSR, 0); |
| |
| regmap_update_bits(sai->regmap, FSL_SAI_TCR1, FSL_SAI_CR1_RFW_MASK, |
| FSL_SAI_MAXBURST_TX * 2); |
| regmap_update_bits(sai->regmap, FSL_SAI_RCR1, FSL_SAI_CR1_RFW_MASK, |
| FSL_SAI_MAXBURST_RX - 1); |
| |
| snd_soc_dai_init_dma_data(cpu_dai, &sai->dma_params_tx, |
| &sai->dma_params_rx); |
| |
| snd_soc_dai_set_drvdata(cpu_dai, sai); |
| |
| return 0; |
| } |
| |
| static struct snd_soc_dai_driver fsl_sai_dai = { |
| .probe = fsl_sai_dai_probe, |
| .playback = { |
| .stream_name = "CPU-Playback", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rate_min = 8000, |
| .rate_max = 192000, |
| .rates = SNDRV_PCM_RATE_KNOT, |
| .formats = FSL_SAI_FORMATS, |
| }, |
| .capture = { |
| .stream_name = "CPU-Capture", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rate_min = 8000, |
| .rate_max = 192000, |
| .rates = SNDRV_PCM_RATE_KNOT, |
| .formats = FSL_SAI_FORMATS, |
| }, |
| .ops = &fsl_sai_pcm_dai_ops, |
| }; |
| |
| static const struct snd_soc_component_driver fsl_component = { |
| .name = "fsl-sai", |
| }; |
| |
| static struct reg_default fsl_sai_reg_defaults[] = { |
| {FSL_SAI_TCR1, 0}, |
| {FSL_SAI_TCR2, 0}, |
| {FSL_SAI_TCR3, 0}, |
| {FSL_SAI_TCR4, 0}, |
| {FSL_SAI_TCR5, 0}, |
| {FSL_SAI_TDR, 0}, |
| {FSL_SAI_TMR, 0}, |
| {FSL_SAI_RCR1, 0}, |
| {FSL_SAI_RCR2, 0}, |
| {FSL_SAI_RCR3, 0}, |
| {FSL_SAI_RCR4, 0}, |
| {FSL_SAI_RCR5, 0}, |
| {FSL_SAI_RMR, 0}, |
| }; |
| |
| static bool fsl_sai_readable_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case FSL_SAI_TCSR: |
| case FSL_SAI_TCR1: |
| case FSL_SAI_TCR2: |
| case FSL_SAI_TCR3: |
| case FSL_SAI_TCR4: |
| case FSL_SAI_TCR5: |
| case FSL_SAI_TFR: |
| case FSL_SAI_TMR: |
| case FSL_SAI_RCSR: |
| case FSL_SAI_RCR1: |
| case FSL_SAI_RCR2: |
| case FSL_SAI_RCR3: |
| case FSL_SAI_RCR4: |
| case FSL_SAI_RCR5: |
| case FSL_SAI_RDR: |
| case FSL_SAI_RFR: |
| case FSL_SAI_RMR: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool fsl_sai_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case FSL_SAI_TCSR: |
| case FSL_SAI_RCSR: |
| case FSL_SAI_TFR: |
| case FSL_SAI_RFR: |
| case FSL_SAI_RDR: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool fsl_sai_writeable_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case FSL_SAI_TCSR: |
| case FSL_SAI_TCR1: |
| case FSL_SAI_TCR2: |
| case FSL_SAI_TCR3: |
| case FSL_SAI_TCR4: |
| case FSL_SAI_TCR5: |
| case FSL_SAI_TDR: |
| case FSL_SAI_TMR: |
| case FSL_SAI_RCSR: |
| case FSL_SAI_RCR1: |
| case FSL_SAI_RCR2: |
| case FSL_SAI_RCR3: |
| case FSL_SAI_RCR4: |
| case FSL_SAI_RCR5: |
| case FSL_SAI_RMR: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static const struct regmap_config fsl_sai_regmap_config = { |
| .reg_bits = 32, |
| .reg_stride = 4, |
| .val_bits = 32, |
| |
| .max_register = FSL_SAI_RMR, |
| .reg_defaults = fsl_sai_reg_defaults, |
| .num_reg_defaults = ARRAY_SIZE(fsl_sai_reg_defaults), |
| .readable_reg = fsl_sai_readable_reg, |
| .volatile_reg = fsl_sai_volatile_reg, |
| .writeable_reg = fsl_sai_writeable_reg, |
| .cache_type = REGCACHE_FLAT, |
| }; |
| |
| static int fsl_sai_probe(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| struct fsl_sai *sai; |
| struct regmap *gpr; |
| struct resource *res; |
| void __iomem *base; |
| char tmp[8]; |
| int irq, ret, i; |
| int index; |
| |
| sai = devm_kzalloc(&pdev->dev, sizeof(*sai), GFP_KERNEL); |
| if (!sai) |
| return -ENOMEM; |
| |
| sai->pdev = pdev; |
| |
| if (of_device_is_compatible(np, "fsl,imx6sx-sai") || |
| of_device_is_compatible(np, "fsl,imx6ul-sai")) |
| sai->sai_on_imx = true; |
| |
| sai->is_lsb_first = of_property_read_bool(np, "lsb-first"); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| sai->regmap = devm_regmap_init_mmio_clk(&pdev->dev, |
| "bus", base, &fsl_sai_regmap_config); |
| |
| /* Compatible with old DTB cases */ |
| if (IS_ERR(sai->regmap)) |
| sai->regmap = devm_regmap_init_mmio_clk(&pdev->dev, |
| "sai", base, &fsl_sai_regmap_config); |
| if (IS_ERR(sai->regmap)) { |
| dev_err(&pdev->dev, "regmap init failed\n"); |
| return PTR_ERR(sai->regmap); |
| } |
| |
| /* No error out for old DTB cases but only mark the clock NULL */ |
| sai->bus_clk = devm_clk_get(&pdev->dev, "bus"); |
| if (IS_ERR(sai->bus_clk)) { |
| dev_err(&pdev->dev, "failed to get bus clock: %ld\n", |
| PTR_ERR(sai->bus_clk)); |
| sai->bus_clk = NULL; |
| } |
| |
| sai->mclk_clk[0] = sai->bus_clk; |
| for (i = 1; i < FSL_SAI_MCLK_MAX; i++) { |
| sprintf(tmp, "mclk%d", i); |
| sai->mclk_clk[i] = devm_clk_get(&pdev->dev, tmp); |
| if (IS_ERR(sai->mclk_clk[i])) { |
| dev_err(&pdev->dev, "failed to get mclk%d clock: %ld\n", |
| i + 1, PTR_ERR(sai->mclk_clk[i])); |
| sai->mclk_clk[i] = NULL; |
| } |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| dev_err(&pdev->dev, "no irq for node %s\n", pdev->name); |
| return irq; |
| } |
| |
| ret = devm_request_irq(&pdev->dev, irq, fsl_sai_isr, 0, np->name, sai); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to claim irq %u\n", irq); |
| return ret; |
| } |
| |
| /* Sync Tx with Rx as default by following old DT binding */ |
| sai->synchronous[RX] = true; |
| sai->synchronous[TX] = false; |
| fsl_sai_dai.symmetric_rates = 1; |
| fsl_sai_dai.symmetric_channels = 1; |
| fsl_sai_dai.symmetric_samplebits = 1; |
| |
| if (of_find_property(np, "fsl,sai-synchronous-rx", NULL) && |
| of_find_property(np, "fsl,sai-asynchronous", NULL)) { |
| /* error out if both synchronous and asynchronous are present */ |
| dev_err(&pdev->dev, "invalid binding for synchronous mode\n"); |
| return -EINVAL; |
| } |
| |
| if (of_find_property(np, "fsl,sai-synchronous-rx", NULL)) { |
| /* Sync Rx with Tx */ |
| sai->synchronous[RX] = false; |
| sai->synchronous[TX] = true; |
| } else if (of_find_property(np, "fsl,sai-asynchronous", NULL)) { |
| /* Discard all settings for asynchronous mode */ |
| sai->synchronous[RX] = false; |
| sai->synchronous[TX] = false; |
| fsl_sai_dai.symmetric_rates = 0; |
| fsl_sai_dai.symmetric_channels = 0; |
| fsl_sai_dai.symmetric_samplebits = 0; |
| } |
| |
| if (of_find_property(np, "fsl,sai-mclk-direction-output", NULL) && |
| of_device_is_compatible(np, "fsl,imx6ul-sai")) { |
| gpr = syscon_regmap_lookup_by_compatible("fsl,imx6ul-iomuxc-gpr"); |
| if (IS_ERR(gpr)) { |
| dev_err(&pdev->dev, "cannot find iomuxc registers\n"); |
| return PTR_ERR(gpr); |
| } |
| |
| index = of_alias_get_id(np, "sai"); |
| if (index < 0) |
| return index; |
| |
| regmap_update_bits(gpr, IOMUXC_GPR1, MCLK_DIR(index), |
| MCLK_DIR(index)); |
| } |
| |
| sai->dma_params_rx.addr = res->start + FSL_SAI_RDR; |
| sai->dma_params_tx.addr = res->start + FSL_SAI_TDR; |
| sai->dma_params_rx.maxburst = FSL_SAI_MAXBURST_RX; |
| sai->dma_params_tx.maxburst = FSL_SAI_MAXBURST_TX; |
| |
| platform_set_drvdata(pdev, sai); |
| |
| ret = devm_snd_soc_register_component(&pdev->dev, &fsl_component, |
| &fsl_sai_dai, 1); |
| if (ret) |
| return ret; |
| |
| if (sai->sai_on_imx) |
| return imx_pcm_dma_init(pdev, IMX_SAI_DMABUF_SIZE); |
| else |
| return devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0); |
| } |
| |
| static const struct of_device_id fsl_sai_ids[] = { |
| { .compatible = "fsl,vf610-sai", }, |
| { .compatible = "fsl,imx6sx-sai", }, |
| { .compatible = "fsl,imx6ul-sai", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, fsl_sai_ids); |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int fsl_sai_suspend(struct device *dev) |
| { |
| struct fsl_sai *sai = dev_get_drvdata(dev); |
| |
| regcache_cache_only(sai->regmap, true); |
| regcache_mark_dirty(sai->regmap); |
| |
| return 0; |
| } |
| |
| static int fsl_sai_resume(struct device *dev) |
| { |
| struct fsl_sai *sai = dev_get_drvdata(dev); |
| |
| regcache_cache_only(sai->regmap, false); |
| regmap_write(sai->regmap, FSL_SAI_TCSR, FSL_SAI_CSR_SR); |
| regmap_write(sai->regmap, FSL_SAI_RCSR, FSL_SAI_CSR_SR); |
| usleep_range(1000, 2000); |
| regmap_write(sai->regmap, FSL_SAI_TCSR, 0); |
| regmap_write(sai->regmap, FSL_SAI_RCSR, 0); |
| return regcache_sync(sai->regmap); |
| } |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| static const struct dev_pm_ops fsl_sai_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(fsl_sai_suspend, fsl_sai_resume) |
| }; |
| |
| static struct platform_driver fsl_sai_driver = { |
| .probe = fsl_sai_probe, |
| .driver = { |
| .name = "fsl-sai", |
| .pm = &fsl_sai_pm_ops, |
| .of_match_table = fsl_sai_ids, |
| }, |
| }; |
| module_platform_driver(fsl_sai_driver); |
| |
| MODULE_DESCRIPTION("Freescale Soc SAI Interface"); |
| MODULE_AUTHOR("Xiubo Li, <Li.Xiubo@freescale.com>"); |
| MODULE_ALIAS("platform:fsl-sai"); |
| MODULE_LICENSE("GPL"); |