| // SPDX-License-Identifier: GPL-2.0 |
| #include <linux/delay.h> |
| |
| #include "nitrox_dev.h" |
| #include "nitrox_csr.h" |
| |
| #define PLL_REF_CLK 50 |
| #define MAX_CSR_RETRIES 10 |
| |
| /** |
| * emu_enable_cores - Enable EMU cluster cores. |
| * @ndev: NITROX device |
| */ |
| static void emu_enable_cores(struct nitrox_device *ndev) |
| { |
| union emu_se_enable emu_se; |
| union emu_ae_enable emu_ae; |
| int i; |
| |
| /* AE cores 20 per cluster */ |
| emu_ae.value = 0; |
| emu_ae.s.enable = 0xfffff; |
| |
| /* SE cores 16 per cluster */ |
| emu_se.value = 0; |
| emu_se.s.enable = 0xffff; |
| |
| /* enable per cluster cores */ |
| for (i = 0; i < NR_CLUSTERS; i++) { |
| nitrox_write_csr(ndev, EMU_AE_ENABLEX(i), emu_ae.value); |
| nitrox_write_csr(ndev, EMU_SE_ENABLEX(i), emu_se.value); |
| } |
| } |
| |
| /** |
| * nitrox_config_emu_unit - configure EMU unit. |
| * @ndev: NITROX device |
| */ |
| void nitrox_config_emu_unit(struct nitrox_device *ndev) |
| { |
| union emu_wd_int_ena_w1s emu_wd_int; |
| union emu_ge_int_ena_w1s emu_ge_int; |
| u64 offset; |
| int i; |
| |
| /* enable cores */ |
| emu_enable_cores(ndev); |
| |
| /* enable general error and watch dog interrupts */ |
| emu_ge_int.value = 0; |
| emu_ge_int.s.se_ge = 0xffff; |
| emu_ge_int.s.ae_ge = 0xfffff; |
| emu_wd_int.value = 0; |
| emu_wd_int.s.se_wd = 1; |
| |
| for (i = 0; i < NR_CLUSTERS; i++) { |
| offset = EMU_WD_INT_ENA_W1SX(i); |
| nitrox_write_csr(ndev, offset, emu_wd_int.value); |
| offset = EMU_GE_INT_ENA_W1SX(i); |
| nitrox_write_csr(ndev, offset, emu_ge_int.value); |
| } |
| } |
| |
| static void reset_pkt_input_ring(struct nitrox_device *ndev, int ring) |
| { |
| union nps_pkt_in_instr_ctl pkt_in_ctl; |
| union nps_pkt_in_done_cnts pkt_in_cnts; |
| int max_retries = MAX_CSR_RETRIES; |
| u64 offset; |
| |
| /* step 1: disable the ring, clear enable bit */ |
| offset = NPS_PKT_IN_INSTR_CTLX(ring); |
| pkt_in_ctl.value = nitrox_read_csr(ndev, offset); |
| pkt_in_ctl.s.enb = 0; |
| nitrox_write_csr(ndev, offset, pkt_in_ctl.value); |
| |
| /* step 2: wait to clear [ENB] */ |
| usleep_range(100, 150); |
| do { |
| pkt_in_ctl.value = nitrox_read_csr(ndev, offset); |
| if (!pkt_in_ctl.s.enb) |
| break; |
| udelay(50); |
| } while (max_retries--); |
| |
| /* step 3: clear done counts */ |
| offset = NPS_PKT_IN_DONE_CNTSX(ring); |
| pkt_in_cnts.value = nitrox_read_csr(ndev, offset); |
| nitrox_write_csr(ndev, offset, pkt_in_cnts.value); |
| usleep_range(50, 100); |
| } |
| |
| void enable_pkt_input_ring(struct nitrox_device *ndev, int ring) |
| { |
| union nps_pkt_in_instr_ctl pkt_in_ctl; |
| int max_retries = MAX_CSR_RETRIES; |
| u64 offset; |
| |
| /* 64-byte instruction size */ |
| offset = NPS_PKT_IN_INSTR_CTLX(ring); |
| pkt_in_ctl.value = nitrox_read_csr(ndev, offset); |
| pkt_in_ctl.s.is64b = 1; |
| pkt_in_ctl.s.enb = 1; |
| nitrox_write_csr(ndev, offset, pkt_in_ctl.value); |
| |
| /* wait for set [ENB] */ |
| do { |
| pkt_in_ctl.value = nitrox_read_csr(ndev, offset); |
| if (pkt_in_ctl.s.enb) |
| break; |
| udelay(50); |
| } while (max_retries--); |
| } |
| |
| /** |
| * nitrox_config_pkt_input_rings - configure Packet Input Rings |
| * @ndev: NITROX device |
| */ |
| void nitrox_config_pkt_input_rings(struct nitrox_device *ndev) |
| { |
| int i; |
| |
| for (i = 0; i < ndev->nr_queues; i++) { |
| struct nitrox_cmdq *cmdq = &ndev->pkt_inq[i]; |
| union nps_pkt_in_instr_rsize pkt_in_rsize; |
| union nps_pkt_in_instr_baoff_dbell pkt_in_dbell; |
| u64 offset; |
| |
| reset_pkt_input_ring(ndev, i); |
| |
| /** |
| * step 4: |
| * configure ring base address 16-byte aligned, |
| * size and interrupt threshold. |
| */ |
| offset = NPS_PKT_IN_INSTR_BADDRX(i); |
| nitrox_write_csr(ndev, offset, cmdq->dma); |
| |
| /* configure ring size */ |
| offset = NPS_PKT_IN_INSTR_RSIZEX(i); |
| pkt_in_rsize.value = 0; |
| pkt_in_rsize.s.rsize = ndev->qlen; |
| nitrox_write_csr(ndev, offset, pkt_in_rsize.value); |
| |
| /* set high threshold for pkt input ring interrupts */ |
| offset = NPS_PKT_IN_INT_LEVELSX(i); |
| nitrox_write_csr(ndev, offset, 0xffffffff); |
| |
| /* step 5: clear off door bell counts */ |
| offset = NPS_PKT_IN_INSTR_BAOFF_DBELLX(i); |
| pkt_in_dbell.value = 0; |
| pkt_in_dbell.s.dbell = 0xffffffff; |
| nitrox_write_csr(ndev, offset, pkt_in_dbell.value); |
| |
| /* enable the ring */ |
| enable_pkt_input_ring(ndev, i); |
| } |
| } |
| |
| static void reset_pkt_solicit_port(struct nitrox_device *ndev, int port) |
| { |
| union nps_pkt_slc_ctl pkt_slc_ctl; |
| union nps_pkt_slc_cnts pkt_slc_cnts; |
| int max_retries = MAX_CSR_RETRIES; |
| u64 offset; |
| |
| /* step 1: disable slc port */ |
| offset = NPS_PKT_SLC_CTLX(port); |
| pkt_slc_ctl.value = nitrox_read_csr(ndev, offset); |
| pkt_slc_ctl.s.enb = 0; |
| nitrox_write_csr(ndev, offset, pkt_slc_ctl.value); |
| |
| /* step 2 */ |
| usleep_range(100, 150); |
| /* wait to clear [ENB] */ |
| do { |
| pkt_slc_ctl.value = nitrox_read_csr(ndev, offset); |
| if (!pkt_slc_ctl.s.enb) |
| break; |
| udelay(50); |
| } while (max_retries--); |
| |
| /* step 3: clear slc counters */ |
| offset = NPS_PKT_SLC_CNTSX(port); |
| pkt_slc_cnts.value = nitrox_read_csr(ndev, offset); |
| nitrox_write_csr(ndev, offset, pkt_slc_cnts.value); |
| usleep_range(50, 100); |
| } |
| |
| void enable_pkt_solicit_port(struct nitrox_device *ndev, int port) |
| { |
| union nps_pkt_slc_ctl pkt_slc_ctl; |
| int max_retries = MAX_CSR_RETRIES; |
| u64 offset; |
| |
| offset = NPS_PKT_SLC_CTLX(port); |
| pkt_slc_ctl.value = 0; |
| pkt_slc_ctl.s.enb = 1; |
| /* |
| * 8 trailing 0x00 bytes will be added |
| * to the end of the outgoing packet. |
| */ |
| pkt_slc_ctl.s.z = 1; |
| /* enable response header */ |
| pkt_slc_ctl.s.rh = 1; |
| nitrox_write_csr(ndev, offset, pkt_slc_ctl.value); |
| |
| /* wait to set [ENB] */ |
| do { |
| pkt_slc_ctl.value = nitrox_read_csr(ndev, offset); |
| if (pkt_slc_ctl.s.enb) |
| break; |
| udelay(50); |
| } while (max_retries--); |
| } |
| |
| static void config_pkt_solicit_port(struct nitrox_device *ndev, int port) |
| { |
| union nps_pkt_slc_int_levels pkt_slc_int; |
| u64 offset; |
| |
| reset_pkt_solicit_port(ndev, port); |
| |
| /* step 4: configure interrupt levels */ |
| offset = NPS_PKT_SLC_INT_LEVELSX(port); |
| pkt_slc_int.value = 0; |
| /* time interrupt threshold */ |
| pkt_slc_int.s.timet = 0x3fffff; |
| nitrox_write_csr(ndev, offset, pkt_slc_int.value); |
| |
| /* enable the solicit port */ |
| enable_pkt_solicit_port(ndev, port); |
| } |
| |
| void nitrox_config_pkt_solicit_ports(struct nitrox_device *ndev) |
| { |
| int i; |
| |
| for (i = 0; i < ndev->nr_queues; i++) |
| config_pkt_solicit_port(ndev, i); |
| } |
| |
| /** |
| * enable_nps_interrupts - enable NPS interrutps |
| * @ndev: NITROX device. |
| * |
| * This includes NPS core, packet in and slc interrupts. |
| */ |
| static void enable_nps_interrupts(struct nitrox_device *ndev) |
| { |
| union nps_core_int_ena_w1s core_int; |
| |
| /* NPS core interrutps */ |
| core_int.value = 0; |
| core_int.s.host_wr_err = 1; |
| core_int.s.host_wr_timeout = 1; |
| core_int.s.exec_wr_timeout = 1; |
| core_int.s.npco_dma_malform = 1; |
| core_int.s.host_nps_wr_err = 1; |
| nitrox_write_csr(ndev, NPS_CORE_INT_ENA_W1S, core_int.value); |
| |
| /* NPS packet in ring interrupts */ |
| nitrox_write_csr(ndev, NPS_PKT_IN_RERR_LO_ENA_W1S, (~0ULL)); |
| nitrox_write_csr(ndev, NPS_PKT_IN_RERR_HI_ENA_W1S, (~0ULL)); |
| nitrox_write_csr(ndev, NPS_PKT_IN_ERR_TYPE_ENA_W1S, (~0ULL)); |
| /* NPS packet slc port interrupts */ |
| nitrox_write_csr(ndev, NPS_PKT_SLC_RERR_HI_ENA_W1S, (~0ULL)); |
| nitrox_write_csr(ndev, NPS_PKT_SLC_RERR_LO_ENA_W1S, (~0ULL)); |
| nitrox_write_csr(ndev, NPS_PKT_SLC_ERR_TYPE_ENA_W1S, (~0uLL)); |
| } |
| |
| void nitrox_config_nps_unit(struct nitrox_device *ndev) |
| { |
| union nps_core_gbl_vfcfg core_gbl_vfcfg; |
| |
| /* endian control information */ |
| nitrox_write_csr(ndev, NPS_CORE_CONTROL, 1ULL); |
| |
| /* disable ILK interface */ |
| core_gbl_vfcfg.value = 0; |
| core_gbl_vfcfg.s.ilk_disable = 1; |
| core_gbl_vfcfg.s.cfg = __NDEV_MODE_PF; |
| nitrox_write_csr(ndev, NPS_CORE_GBL_VFCFG, core_gbl_vfcfg.value); |
| /* config input and solicit ports */ |
| nitrox_config_pkt_input_rings(ndev); |
| nitrox_config_pkt_solicit_ports(ndev); |
| |
| /* enable interrupts */ |
| enable_nps_interrupts(ndev); |
| } |
| |
| void nitrox_config_pom_unit(struct nitrox_device *ndev) |
| { |
| union pom_int_ena_w1s pom_int; |
| int i; |
| |
| /* enable pom interrupts */ |
| pom_int.value = 0; |
| pom_int.s.illegal_dport = 1; |
| nitrox_write_csr(ndev, POM_INT_ENA_W1S, pom_int.value); |
| |
| /* enable perf counters */ |
| for (i = 0; i < ndev->hw.se_cores; i++) |
| nitrox_write_csr(ndev, POM_PERF_CTL, BIT_ULL(i)); |
| } |
| |
| /** |
| * nitrox_config_rand_unit - enable NITROX random number unit |
| * @ndev: NITROX device |
| */ |
| void nitrox_config_rand_unit(struct nitrox_device *ndev) |
| { |
| union efl_rnm_ctl_status efl_rnm_ctl; |
| u64 offset; |
| |
| offset = EFL_RNM_CTL_STATUS; |
| efl_rnm_ctl.value = nitrox_read_csr(ndev, offset); |
| efl_rnm_ctl.s.ent_en = 1; |
| efl_rnm_ctl.s.rng_en = 1; |
| nitrox_write_csr(ndev, offset, efl_rnm_ctl.value); |
| } |
| |
| void nitrox_config_efl_unit(struct nitrox_device *ndev) |
| { |
| int i; |
| |
| for (i = 0; i < NR_CLUSTERS; i++) { |
| union efl_core_int_ena_w1s efl_core_int; |
| u64 offset; |
| |
| /* EFL core interrupts */ |
| offset = EFL_CORE_INT_ENA_W1SX(i); |
| efl_core_int.value = 0; |
| efl_core_int.s.len_ovr = 1; |
| efl_core_int.s.d_left = 1; |
| efl_core_int.s.epci_decode_err = 1; |
| nitrox_write_csr(ndev, offset, efl_core_int.value); |
| |
| offset = EFL_CORE_VF_ERR_INT0_ENA_W1SX(i); |
| nitrox_write_csr(ndev, offset, (~0ULL)); |
| offset = EFL_CORE_VF_ERR_INT1_ENA_W1SX(i); |
| nitrox_write_csr(ndev, offset, (~0ULL)); |
| } |
| } |
| |
| void nitrox_config_bmi_unit(struct nitrox_device *ndev) |
| { |
| union bmi_ctl bmi_ctl; |
| union bmi_int_ena_w1s bmi_int_ena; |
| u64 offset; |
| |
| /* no threshold limits for PCIe */ |
| offset = BMI_CTL; |
| bmi_ctl.value = nitrox_read_csr(ndev, offset); |
| bmi_ctl.s.max_pkt_len = 0xff; |
| bmi_ctl.s.nps_free_thrsh = 0xff; |
| bmi_ctl.s.nps_hdrq_thrsh = 0x7a; |
| nitrox_write_csr(ndev, offset, bmi_ctl.value); |
| |
| /* enable interrupts */ |
| offset = BMI_INT_ENA_W1S; |
| bmi_int_ena.value = 0; |
| bmi_int_ena.s.max_len_err_nps = 1; |
| bmi_int_ena.s.pkt_rcv_err_nps = 1; |
| bmi_int_ena.s.fpf_undrrn = 1; |
| nitrox_write_csr(ndev, offset, bmi_int_ena.value); |
| } |
| |
| void nitrox_config_bmo_unit(struct nitrox_device *ndev) |
| { |
| union bmo_ctl2 bmo_ctl2; |
| u64 offset; |
| |
| /* no threshold limits for PCIe */ |
| offset = BMO_CTL2; |
| bmo_ctl2.value = nitrox_read_csr(ndev, offset); |
| bmo_ctl2.s.nps_slc_buf_thrsh = 0xff; |
| nitrox_write_csr(ndev, offset, bmo_ctl2.value); |
| } |
| |
| void invalidate_lbc(struct nitrox_device *ndev) |
| { |
| union lbc_inval_ctl lbc_ctl; |
| union lbc_inval_status lbc_stat; |
| int max_retries = MAX_CSR_RETRIES; |
| u64 offset; |
| |
| /* invalidate LBC */ |
| offset = LBC_INVAL_CTL; |
| lbc_ctl.value = nitrox_read_csr(ndev, offset); |
| lbc_ctl.s.cam_inval_start = 1; |
| nitrox_write_csr(ndev, offset, lbc_ctl.value); |
| |
| offset = LBC_INVAL_STATUS; |
| do { |
| lbc_stat.value = nitrox_read_csr(ndev, offset); |
| if (lbc_stat.s.done) |
| break; |
| udelay(50); |
| } while (max_retries--); |
| } |
| |
| void nitrox_config_lbc_unit(struct nitrox_device *ndev) |
| { |
| union lbc_int_ena_w1s lbc_int_ena; |
| u64 offset; |
| |
| invalidate_lbc(ndev); |
| |
| /* enable interrupts */ |
| offset = LBC_INT_ENA_W1S; |
| lbc_int_ena.value = 0; |
| lbc_int_ena.s.dma_rd_err = 1; |
| lbc_int_ena.s.over_fetch_err = 1; |
| lbc_int_ena.s.cam_inval_abort = 1; |
| lbc_int_ena.s.cam_hard_err = 1; |
| nitrox_write_csr(ndev, offset, lbc_int_ena.value); |
| |
| offset = LBC_PLM_VF1_64_INT_ENA_W1S; |
| nitrox_write_csr(ndev, offset, (~0ULL)); |
| offset = LBC_PLM_VF65_128_INT_ENA_W1S; |
| nitrox_write_csr(ndev, offset, (~0ULL)); |
| |
| offset = LBC_ELM_VF1_64_INT_ENA_W1S; |
| nitrox_write_csr(ndev, offset, (~0ULL)); |
| offset = LBC_ELM_VF65_128_INT_ENA_W1S; |
| nitrox_write_csr(ndev, offset, (~0ULL)); |
| } |
| |
| void config_nps_core_vfcfg_mode(struct nitrox_device *ndev, enum vf_mode mode) |
| { |
| union nps_core_gbl_vfcfg vfcfg; |
| |
| vfcfg.value = nitrox_read_csr(ndev, NPS_CORE_GBL_VFCFG); |
| vfcfg.s.cfg = mode & 0x7; |
| |
| nitrox_write_csr(ndev, NPS_CORE_GBL_VFCFG, vfcfg.value); |
| } |
| |
| void nitrox_get_hwinfo(struct nitrox_device *ndev) |
| { |
| union emu_fuse_map emu_fuse; |
| union rst_boot rst_boot; |
| union fus_dat1 fus_dat1; |
| unsigned char name[IFNAMSIZ * 2] = {}; |
| int i, dead_cores; |
| u64 offset; |
| |
| /* get core frequency */ |
| offset = RST_BOOT; |
| rst_boot.value = nitrox_read_csr(ndev, offset); |
| ndev->hw.freq = (rst_boot.pnr_mul + 3) * PLL_REF_CLK; |
| |
| for (i = 0; i < NR_CLUSTERS; i++) { |
| offset = EMU_FUSE_MAPX(i); |
| emu_fuse.value = nitrox_read_csr(ndev, offset); |
| if (emu_fuse.s.valid) { |
| dead_cores = hweight32(emu_fuse.s.ae_fuse); |
| ndev->hw.ae_cores += AE_CORES_PER_CLUSTER - dead_cores; |
| dead_cores = hweight16(emu_fuse.s.se_fuse); |
| ndev->hw.se_cores += SE_CORES_PER_CLUSTER - dead_cores; |
| } |
| } |
| /* find zip hardware availability */ |
| offset = FUS_DAT1; |
| fus_dat1.value = nitrox_read_csr(ndev, offset); |
| if (!fus_dat1.nozip) { |
| dead_cores = hweight8(fus_dat1.zip_info); |
| ndev->hw.zip_cores = ZIP_MAX_CORES - dead_cores; |
| } |
| |
| /* determine the partname CNN55<cores>-<freq><pincount>-<rev>*/ |
| if (ndev->hw.ae_cores == AE_MAX_CORES) { |
| switch (ndev->hw.se_cores) { |
| case SE_MAX_CORES: |
| i = snprintf(name, sizeof(name), "CNN5560"); |
| break; |
| case 40: |
| i = snprintf(name, sizeof(name), "CNN5560s"); |
| break; |
| } |
| } else if (ndev->hw.ae_cores == (AE_MAX_CORES / 2)) { |
| i = snprintf(name, sizeof(name), "CNN5530"); |
| } else { |
| i = snprintf(name, sizeof(name), "CNN5560i"); |
| } |
| |
| snprintf(name + i, sizeof(name) - i, "-%3dBG676-1.%u", |
| ndev->hw.freq, ndev->hw.revision_id); |
| |
| /* copy partname */ |
| strncpy(ndev->hw.partname, name, sizeof(ndev->hw.partname)); |
| } |
| |
| void enable_pf2vf_mbox_interrupts(struct nitrox_device *ndev) |
| { |
| u64 value = ~0ULL; |
| u64 reg_addr; |
| |
| /* Mailbox interrupt low enable set register */ |
| reg_addr = NPS_PKT_MBOX_INT_LO_ENA_W1S; |
| nitrox_write_csr(ndev, reg_addr, value); |
| |
| /* Mailbox interrupt high enable set register */ |
| reg_addr = NPS_PKT_MBOX_INT_HI_ENA_W1S; |
| nitrox_write_csr(ndev, reg_addr, value); |
| } |
| |
| void disable_pf2vf_mbox_interrupts(struct nitrox_device *ndev) |
| { |
| u64 value = ~0ULL; |
| u64 reg_addr; |
| |
| /* Mailbox interrupt low enable clear register */ |
| reg_addr = NPS_PKT_MBOX_INT_LO_ENA_W1C; |
| nitrox_write_csr(ndev, reg_addr, value); |
| |
| /* Mailbox interrupt high enable clear register */ |
| reg_addr = NPS_PKT_MBOX_INT_HI_ENA_W1C; |
| nitrox_write_csr(ndev, reg_addr, value); |
| } |