blob: 3f3537719beb2eddaa6c132236da3a8f2ff0bdc7 [file] [log] [blame]
config DRM_PANEL
bool
depends on DRM
help
Panel registration and lookup framework.
menu "Display Panels"
depends on DRM && DRM_PANEL
config DRM_PANEL_ARM_VERSATILE
tristate "ARM Versatile panel driver"
depends on OF
depends on MFD_SYSCON
select VIDEOMODE_HELPERS
help
This driver supports the ARM Versatile panels connected to ARM
reference designs. The panel is detected using special registers
in the Versatile family syscon registers.
config DRM_PANEL_LVDS
tristate "Generic LVDS panel driver"
depends on OF
depends on BACKLIGHT_CLASS_DEVICE
select VIDEOMODE_HELPERS
help
This driver supports LVDS panels that don't require device-specific
handling of power supplies or control signals. It implements automatic
backlight handling if the panel is attached to a backlight controller.
config DRM_PANEL_SIMPLE
tristate "support for simple panels"
depends on OF
depends on BACKLIGHT_CLASS_DEVICE
select VIDEOMODE_HELPERS
help
DRM panel driver for dumb panels that need at most a regulator and
a GPIO to be powered up. Optionally a backlight can be attached so
that it can be automatically turned off when the panel goes into a
low power state.
config DRM_PANEL_ILITEK_IL9322
tristate "Ilitek ILI9322 320x240 QVGA panels"
depends on OF && SPI
select REGMAP
help
Say Y here if you want to enable support for Ilitek IL9322
QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
config DRM_PANEL_ILITEK_ILI9881C
tristate "Ilitek ILI9881C-based panels"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y if you want to enable support for panels based on the
Ilitek ILI9881c controller.
config DRM_PANEL_INNOLUX_P079ZCA
tristate "Innolux P079ZCA panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Innolux P079ZCA
TFT-LCD modules. The panel has a 1024x768 resolution and uses
24 bit RGB per pixel. It provides a MIPI DSI interface to
the host and has a built-in LED backlight.
config DRM_PANEL_JDI_LT070ME05000
tristate "JDI LT070ME05000 WUXGA DSI panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for JDI DSI video mode
panel as found in Google Nexus 7 (2013) devices.
The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
24 bit per pixel.
config DRM_PANEL_SAMSUNG_LD9040
tristate "Samsung LD9040 RGB/SPI panel"
depends on OF && SPI
select VIDEOMODE_HELPERS
config DRM_PANEL_LG_LG4573
tristate "LG4573 RGB/SPI panel"
depends on OF && SPI
select VIDEOMODE_HELPERS
help
Say Y here if you want to enable support for LG4573 RGB panel.
To compile this driver as a module, choose M here.
config DRM_PANEL_OLIMEX_LCD_OLINUXINO
tristate "Olimex LCD-OLinuXino panel"
depends on OF
depends on I2C
depends on BACKLIGHT_CLASS_DEVICE
help
The panel is used with different sizes LCDs, from 480x272 to
1280x800, and 24 bit per pixel.
Say Y here if you want to enable support for Olimex Ltd.
LCD-OLinuXino panel.
config DRM_PANEL_ORISETECH_OTM8009A
tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Orise Technology
otm8009a 480x800 dsi 2dl panel.
config DRM_PANEL_PANASONIC_VVX10F034N00
tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Panasonic VVX10F034N00
WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
Xperia Z2 tablets
config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
tristate "Raspberry Pi 7-inch touchscreen panel"
depends on DRM_MIPI_DSI
help
Say Y here if you want to enable support for the Raspberry
Pi 7" Touchscreen. To compile this driver as a module,
choose M here.
config DRM_PANEL_RAYDIUM_RM68200
tristate "Raydium RM68200 720x1280 DSI video mode panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Raydium RM68200
720x1280 DSI video mode panel.
config DRM_PANEL_SAMSUNG_S6D16D0
tristate "Samsung S6D16D0 DSI video mode panel"
depends on OF
depends on DRM_MIPI_DSI
select VIDEOMODE_HELPERS
config DRM_PANEL_SAMSUNG_S6E3HA2
tristate "Samsung S6E3HA2 DSI video mode panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
select VIDEOMODE_HELPERS
config DRM_PANEL_SAMSUNG_S6E63J0X03
tristate "Samsung S6E63J0X03 DSI command mode panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
select VIDEOMODE_HELPERS
config DRM_PANEL_SAMSUNG_S6E8AA0
tristate "Samsung S6E8AA0 DSI video mode panel"
depends on OF
select DRM_MIPI_DSI
select VIDEOMODE_HELPERS
config DRM_PANEL_SEIKO_43WVF1G
tristate "Seiko 43WVF1G panel"
depends on OF
depends on BACKLIGHT_CLASS_DEVICE
select VIDEOMODE_HELPERS
help
Say Y here if you want to enable support for the Seiko
43WVF1G controller for 800x480 LCD panels
config DRM_PANEL_SHARP_LQ101R1SX01
tristate "Sharp LQ101R1SX01 panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Sharp LQ101R1SX01
TFT-LCD modules. The panel has a 2560x1600 resolution and uses
24 bit RGB per pixel. It provides a dual MIPI DSI interface to
the host and has a built-in LED backlight.
To compile this driver as a module, choose M here: the module
will be called panel-sharp-lq101r1sx01.
config DRM_PANEL_SHARP_LS043T1LE01
tristate "Sharp LS043T1LE01 qHD video mode panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
(540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
config DRM_PANEL_SITRONIX_ST7789V
tristate "Sitronix ST7789V panel"
depends on OF && SPI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for the Sitronix
ST7789V controller for 240x320 LCD panels
config DRM_PANEL_TRULY_NT35597_WQXGA
tristate "Truly WQXGA"
depends on OF
depends on DRM_MIPI_DSI
help
Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
Video Mode panel
endmenu