| /* |
| * V4L2 subdevice driver for OmniVision OV6650 Camera Sensor |
| * |
| * Copyright (C) 2010 Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> |
| * |
| * Based on OmniVision OV96xx Camera Driver |
| * Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com> |
| * |
| * Based on ov772x camera driver: |
| * Copyright (C) 2008 Renesas Solutions Corp. |
| * Kuninori Morimoto <morimoto.kuninori@renesas.com> |
| * |
| * Based on ov7670 and soc_camera_platform driver, |
| * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net> |
| * Copyright (C) 2008 Magnus Damm |
| * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> |
| * |
| * Hardware specific bits initialy based on former work by Matt Callow |
| * drivers/media/video/omap/sensor_ov6650.c |
| * Copyright (C) 2006 Matt Callow |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/slab.h> |
| #include <linux/v4l2-mediabus.h> |
| #include <linux/module.h> |
| |
| #include <media/v4l2-clk.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-device.h> |
| |
| /* Register definitions */ |
| #define REG_GAIN 0x00 /* range 00 - 3F */ |
| #define REG_BLUE 0x01 |
| #define REG_RED 0x02 |
| #define REG_SAT 0x03 /* [7:4] saturation [0:3] reserved */ |
| #define REG_HUE 0x04 /* [7:6] rsrvd [5] hue en [4:0] hue */ |
| |
| #define REG_BRT 0x06 |
| |
| #define REG_PIDH 0x0a |
| #define REG_PIDL 0x0b |
| |
| #define REG_AECH 0x10 |
| #define REG_CLKRC 0x11 /* Data Format and Internal Clock */ |
| /* [7:6] Input system clock (MHz)*/ |
| /* 00=8, 01=12, 10=16, 11=24 */ |
| /* [5:0]: Internal Clock Pre-Scaler */ |
| #define REG_COMA 0x12 /* [7] Reset */ |
| #define REG_COMB 0x13 |
| #define REG_COMC 0x14 |
| #define REG_COMD 0x15 |
| #define REG_COML 0x16 |
| #define REG_HSTRT 0x17 |
| #define REG_HSTOP 0x18 |
| #define REG_VSTRT 0x19 |
| #define REG_VSTOP 0x1a |
| #define REG_PSHFT 0x1b |
| #define REG_MIDH 0x1c |
| #define REG_MIDL 0x1d |
| #define REG_HSYNS 0x1e |
| #define REG_HSYNE 0x1f |
| #define REG_COME 0x20 |
| #define REG_YOFF 0x21 |
| #define REG_UOFF 0x22 |
| #define REG_VOFF 0x23 |
| #define REG_AEW 0x24 |
| #define REG_AEB 0x25 |
| #define REG_COMF 0x26 |
| #define REG_COMG 0x27 |
| #define REG_COMH 0x28 |
| #define REG_COMI 0x29 |
| |
| #define REG_FRARL 0x2b |
| #define REG_COMJ 0x2c |
| #define REG_COMK 0x2d |
| #define REG_AVGY 0x2e |
| #define REG_REF0 0x2f |
| #define REG_REF1 0x30 |
| #define REG_REF2 0x31 |
| #define REG_FRAJH 0x32 |
| #define REG_FRAJL 0x33 |
| #define REG_FACT 0x34 |
| #define REG_L1AEC 0x35 |
| #define REG_AVGU 0x36 |
| #define REG_AVGV 0x37 |
| |
| #define REG_SPCB 0x60 |
| #define REG_SPCC 0x61 |
| #define REG_GAM1 0x62 |
| #define REG_GAM2 0x63 |
| #define REG_GAM3 0x64 |
| #define REG_SPCD 0x65 |
| |
| #define REG_SPCE 0x68 |
| #define REG_ADCL 0x69 |
| |
| #define REG_RMCO 0x6c |
| #define REG_GMCO 0x6d |
| #define REG_BMCO 0x6e |
| |
| |
| /* Register bits, values, etc. */ |
| #define OV6650_PIDH 0x66 /* high byte of product ID number */ |
| #define OV6650_PIDL 0x50 /* low byte of product ID number */ |
| #define OV6650_MIDH 0x7F /* high byte of mfg ID */ |
| #define OV6650_MIDL 0xA2 /* low byte of mfg ID */ |
| |
| #define DEF_GAIN 0x00 |
| #define DEF_BLUE 0x80 |
| #define DEF_RED 0x80 |
| |
| #define SAT_SHIFT 4 |
| #define SAT_MASK (0xf << SAT_SHIFT) |
| #define SET_SAT(x) (((x) << SAT_SHIFT) & SAT_MASK) |
| |
| #define HUE_EN BIT(5) |
| #define HUE_MASK 0x1f |
| #define DEF_HUE 0x10 |
| #define SET_HUE(x) (HUE_EN | ((x) & HUE_MASK)) |
| |
| #define DEF_AECH 0x4D |
| |
| #define CLKRC_6MHz 0x00 |
| #define CLKRC_12MHz 0x40 |
| #define CLKRC_16MHz 0x80 |
| #define CLKRC_24MHz 0xc0 |
| #define CLKRC_DIV_MASK 0x3f |
| #define GET_CLKRC_DIV(x) (((x) & CLKRC_DIV_MASK) + 1) |
| |
| #define COMA_RESET BIT(7) |
| #define COMA_QCIF BIT(5) |
| #define COMA_RAW_RGB BIT(4) |
| #define COMA_RGB BIT(3) |
| #define COMA_BW BIT(2) |
| #define COMA_WORD_SWAP BIT(1) |
| #define COMA_BYTE_SWAP BIT(0) |
| #define DEF_COMA 0x00 |
| |
| #define COMB_FLIP_V BIT(7) |
| #define COMB_FLIP_H BIT(5) |
| #define COMB_BAND_FILTER BIT(4) |
| #define COMB_AWB BIT(2) |
| #define COMB_AGC BIT(1) |
| #define COMB_AEC BIT(0) |
| #define DEF_COMB 0x5f |
| |
| #define COML_ONE_CHANNEL BIT(7) |
| |
| #define DEF_HSTRT 0x24 |
| #define DEF_HSTOP 0xd4 |
| #define DEF_VSTRT 0x04 |
| #define DEF_VSTOP 0x94 |
| |
| #define COMF_HREF_LOW BIT(4) |
| |
| #define COMJ_PCLK_RISING BIT(4) |
| #define COMJ_VSYNC_HIGH BIT(0) |
| |
| /* supported resolutions */ |
| #define W_QCIF (DEF_HSTOP - DEF_HSTRT) |
| #define W_CIF (W_QCIF << 1) |
| #define H_QCIF (DEF_VSTOP - DEF_VSTRT) |
| #define H_CIF (H_QCIF << 1) |
| |
| #define FRAME_RATE_MAX 30 |
| |
| |
| struct ov6650_reg { |
| u8 reg; |
| u8 val; |
| }; |
| |
| struct ov6650 { |
| struct v4l2_subdev subdev; |
| struct v4l2_ctrl_handler hdl; |
| struct { |
| /* exposure/autoexposure cluster */ |
| struct v4l2_ctrl *autoexposure; |
| struct v4l2_ctrl *exposure; |
| }; |
| struct { |
| /* gain/autogain cluster */ |
| struct v4l2_ctrl *autogain; |
| struct v4l2_ctrl *gain; |
| }; |
| struct { |
| /* blue/red/autowhitebalance cluster */ |
| struct v4l2_ctrl *autowb; |
| struct v4l2_ctrl *blue; |
| struct v4l2_ctrl *red; |
| }; |
| struct v4l2_clk *clk; |
| bool half_scale; /* scale down output by 2 */ |
| struct v4l2_rect rect; /* sensor cropping window */ |
| unsigned long pclk_limit; /* from host */ |
| unsigned long pclk_max; /* from resolution and format */ |
| struct v4l2_fract tpf; /* as requested with s_frame_interval */ |
| u32 code; |
| enum v4l2_colorspace colorspace; |
| }; |
| |
| |
| static u32 ov6650_codes[] = { |
| MEDIA_BUS_FMT_YUYV8_2X8, |
| MEDIA_BUS_FMT_UYVY8_2X8, |
| MEDIA_BUS_FMT_YVYU8_2X8, |
| MEDIA_BUS_FMT_VYUY8_2X8, |
| MEDIA_BUS_FMT_SBGGR8_1X8, |
| MEDIA_BUS_FMT_Y8_1X8, |
| }; |
| |
| /* read a register */ |
| static int ov6650_reg_read(struct i2c_client *client, u8 reg, u8 *val) |
| { |
| int ret; |
| u8 data = reg; |
| struct i2c_msg msg = { |
| .addr = client->addr, |
| .flags = 0, |
| .len = 1, |
| .buf = &data, |
| }; |
| |
| ret = i2c_transfer(client->adapter, &msg, 1); |
| if (ret < 0) |
| goto err; |
| |
| msg.flags = I2C_M_RD; |
| ret = i2c_transfer(client->adapter, &msg, 1); |
| if (ret < 0) |
| goto err; |
| |
| *val = data; |
| return 0; |
| |
| err: |
| dev_err(&client->dev, "Failed reading register 0x%02x!\n", reg); |
| return ret; |
| } |
| |
| /* write a register */ |
| static int ov6650_reg_write(struct i2c_client *client, u8 reg, u8 val) |
| { |
| int ret; |
| unsigned char data[2] = { reg, val }; |
| struct i2c_msg msg = { |
| .addr = client->addr, |
| .flags = 0, |
| .len = 2, |
| .buf = data, |
| }; |
| |
| ret = i2c_transfer(client->adapter, &msg, 1); |
| udelay(100); |
| |
| if (ret < 0) { |
| dev_err(&client->dev, "Failed writing register 0x%02x!\n", reg); |
| return ret; |
| } |
| return 0; |
| } |
| |
| |
| /* Read a register, alter its bits, write it back */ |
| static int ov6650_reg_rmw(struct i2c_client *client, u8 reg, u8 set, u8 mask) |
| { |
| u8 val; |
| int ret; |
| |
| ret = ov6650_reg_read(client, reg, &val); |
| if (ret) { |
| dev_err(&client->dev, |
| "[Read]-Modify-Write of register 0x%02x failed!\n", |
| reg); |
| return ret; |
| } |
| |
| val &= ~mask; |
| val |= set; |
| |
| ret = ov6650_reg_write(client, reg, val); |
| if (ret) |
| dev_err(&client->dev, |
| "Read-Modify-[Write] of register 0x%02x failed!\n", |
| reg); |
| |
| return ret; |
| } |
| |
| static struct ov6650 *to_ov6650(const struct i2c_client *client) |
| { |
| return container_of(i2c_get_clientdata(client), struct ov6650, subdev); |
| } |
| |
| /* Start/Stop streaming from the device */ |
| static int ov6650_s_stream(struct v4l2_subdev *sd, int enable) |
| { |
| return 0; |
| } |
| |
| /* Get status of additional camera capabilities */ |
| static int ov6550_g_volatile_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct ov6650 *priv = container_of(ctrl->handler, struct ov6650, hdl); |
| struct v4l2_subdev *sd = &priv->subdev; |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| uint8_t reg, reg2; |
| int ret; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_AUTOGAIN: |
| ret = ov6650_reg_read(client, REG_GAIN, ®); |
| if (!ret) |
| priv->gain->val = reg; |
| return ret; |
| case V4L2_CID_AUTO_WHITE_BALANCE: |
| ret = ov6650_reg_read(client, REG_BLUE, ®); |
| if (!ret) |
| ret = ov6650_reg_read(client, REG_RED, ®2); |
| if (!ret) { |
| priv->blue->val = reg; |
| priv->red->val = reg2; |
| } |
| return ret; |
| case V4L2_CID_EXPOSURE_AUTO: |
| ret = ov6650_reg_read(client, REG_AECH, ®); |
| if (!ret) |
| priv->exposure->val = reg; |
| return ret; |
| } |
| return -EINVAL; |
| } |
| |
| /* Set status of additional camera capabilities */ |
| static int ov6550_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct ov6650 *priv = container_of(ctrl->handler, struct ov6650, hdl); |
| struct v4l2_subdev *sd = &priv->subdev; |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| int ret; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_AUTOGAIN: |
| ret = ov6650_reg_rmw(client, REG_COMB, |
| ctrl->val ? COMB_AGC : 0, COMB_AGC); |
| if (!ret && !ctrl->val) |
| ret = ov6650_reg_write(client, REG_GAIN, priv->gain->val); |
| return ret; |
| case V4L2_CID_AUTO_WHITE_BALANCE: |
| ret = ov6650_reg_rmw(client, REG_COMB, |
| ctrl->val ? COMB_AWB : 0, COMB_AWB); |
| if (!ret && !ctrl->val) { |
| ret = ov6650_reg_write(client, REG_BLUE, priv->blue->val); |
| if (!ret) |
| ret = ov6650_reg_write(client, REG_RED, |
| priv->red->val); |
| } |
| return ret; |
| case V4L2_CID_SATURATION: |
| return ov6650_reg_rmw(client, REG_SAT, SET_SAT(ctrl->val), |
| SAT_MASK); |
| case V4L2_CID_HUE: |
| return ov6650_reg_rmw(client, REG_HUE, SET_HUE(ctrl->val), |
| HUE_MASK); |
| case V4L2_CID_BRIGHTNESS: |
| return ov6650_reg_write(client, REG_BRT, ctrl->val); |
| case V4L2_CID_EXPOSURE_AUTO: |
| ret = ov6650_reg_rmw(client, REG_COMB, ctrl->val == |
| V4L2_EXPOSURE_AUTO ? COMB_AEC : 0, COMB_AEC); |
| if (!ret && ctrl->val == V4L2_EXPOSURE_MANUAL) |
| ret = ov6650_reg_write(client, REG_AECH, |
| priv->exposure->val); |
| return ret; |
| case V4L2_CID_GAMMA: |
| return ov6650_reg_write(client, REG_GAM1, ctrl->val); |
| case V4L2_CID_VFLIP: |
| return ov6650_reg_rmw(client, REG_COMB, |
| ctrl->val ? COMB_FLIP_V : 0, COMB_FLIP_V); |
| case V4L2_CID_HFLIP: |
| return ov6650_reg_rmw(client, REG_COMB, |
| ctrl->val ? COMB_FLIP_H : 0, COMB_FLIP_H); |
| } |
| |
| return -EINVAL; |
| } |
| |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| static int ov6650_get_register(struct v4l2_subdev *sd, |
| struct v4l2_dbg_register *reg) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| int ret; |
| u8 val; |
| |
| if (reg->reg & ~0xff) |
| return -EINVAL; |
| |
| reg->size = 1; |
| |
| ret = ov6650_reg_read(client, reg->reg, &val); |
| if (!ret) |
| reg->val = (__u64)val; |
| |
| return ret; |
| } |
| |
| static int ov6650_set_register(struct v4l2_subdev *sd, |
| const struct v4l2_dbg_register *reg) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| if (reg->reg & ~0xff || reg->val & ~0xff) |
| return -EINVAL; |
| |
| return ov6650_reg_write(client, reg->reg, reg->val); |
| } |
| #endif |
| |
| static int ov6650_s_power(struct v4l2_subdev *sd, int on) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct ov6650 *priv = to_ov6650(client); |
| int ret = 0; |
| |
| if (on) |
| ret = v4l2_clk_enable(priv->clk); |
| else |
| v4l2_clk_disable(priv->clk); |
| |
| return ret; |
| } |
| |
| static int ov6650_get_selection(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_selection *sel) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct ov6650 *priv = to_ov6650(client); |
| |
| if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE) |
| return -EINVAL; |
| |
| switch (sel->target) { |
| case V4L2_SEL_TGT_CROP_BOUNDS: |
| sel->r.left = DEF_HSTRT << 1; |
| sel->r.top = DEF_VSTRT << 1; |
| sel->r.width = W_CIF; |
| sel->r.height = H_CIF; |
| return 0; |
| case V4L2_SEL_TGT_CROP: |
| sel->r = priv->rect; |
| return 0; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int ov6650_set_selection(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_selection *sel) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct ov6650 *priv = to_ov6650(client); |
| struct v4l2_rect rect = sel->r; |
| int ret; |
| |
| if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE || |
| sel->target != V4L2_SEL_TGT_CROP) |
| return -EINVAL; |
| |
| v4l_bound_align_image(&rect.width, 2, W_CIF, 1, |
| &rect.height, 2, H_CIF, 1, 0); |
| v4l_bound_align_image(&rect.left, DEF_HSTRT << 1, |
| (DEF_HSTRT << 1) + W_CIF - (__s32)rect.width, 1, |
| &rect.top, DEF_VSTRT << 1, |
| (DEF_VSTRT << 1) + H_CIF - (__s32)rect.height, 1, |
| 0); |
| |
| ret = ov6650_reg_write(client, REG_HSTRT, rect.left >> 1); |
| if (!ret) { |
| priv->rect.left = rect.left; |
| ret = ov6650_reg_write(client, REG_HSTOP, |
| (rect.left + rect.width) >> 1); |
| } |
| if (!ret) { |
| priv->rect.width = rect.width; |
| ret = ov6650_reg_write(client, REG_VSTRT, rect.top >> 1); |
| } |
| if (!ret) { |
| priv->rect.top = rect.top; |
| ret = ov6650_reg_write(client, REG_VSTOP, |
| (rect.top + rect.height) >> 1); |
| } |
| if (!ret) |
| priv->rect.height = rect.height; |
| |
| return ret; |
| } |
| |
| static int ov6650_get_fmt(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *format) |
| { |
| struct v4l2_mbus_framefmt *mf = &format->format; |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct ov6650 *priv = to_ov6650(client); |
| |
| if (format->pad) |
| return -EINVAL; |
| |
| mf->width = priv->rect.width >> priv->half_scale; |
| mf->height = priv->rect.height >> priv->half_scale; |
| mf->code = priv->code; |
| mf->colorspace = priv->colorspace; |
| mf->field = V4L2_FIELD_NONE; |
| |
| return 0; |
| } |
| |
| static bool is_unscaled_ok(int width, int height, struct v4l2_rect *rect) |
| { |
| return width > rect->width >> 1 || height > rect->height >> 1; |
| } |
| |
| static u8 to_clkrc(struct v4l2_fract *timeperframe, |
| unsigned long pclk_limit, unsigned long pclk_max) |
| { |
| unsigned long pclk; |
| |
| if (timeperframe->numerator && timeperframe->denominator) |
| pclk = pclk_max * timeperframe->denominator / |
| (FRAME_RATE_MAX * timeperframe->numerator); |
| else |
| pclk = pclk_max; |
| |
| if (pclk_limit && pclk_limit < pclk) |
| pclk = pclk_limit; |
| |
| return (pclk_max - 1) / pclk; |
| } |
| |
| /* set the format we will capture in */ |
| static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct ov6650 *priv = to_ov6650(client); |
| bool half_scale = !is_unscaled_ok(mf->width, mf->height, &priv->rect); |
| struct v4l2_subdev_selection sel = { |
| .which = V4L2_SUBDEV_FORMAT_ACTIVE, |
| .target = V4L2_SEL_TGT_CROP, |
| .r.left = priv->rect.left + (priv->rect.width >> 1) - |
| (mf->width >> (1 - half_scale)), |
| .r.top = priv->rect.top + (priv->rect.height >> 1) - |
| (mf->height >> (1 - half_scale)), |
| .r.width = mf->width << half_scale, |
| .r.height = mf->height << half_scale, |
| }; |
| u32 code = mf->code; |
| unsigned long mclk, pclk; |
| u8 coma_set = 0, coma_mask = 0, coml_set, coml_mask, clkrc; |
| int ret; |
| |
| /* select color matrix configuration for given color encoding */ |
| switch (code) { |
| case MEDIA_BUS_FMT_Y8_1X8: |
| dev_dbg(&client->dev, "pixel format GREY8_1X8\n"); |
| coma_mask |= COMA_RGB | COMA_WORD_SWAP | COMA_BYTE_SWAP; |
| coma_set |= COMA_BW; |
| break; |
| case MEDIA_BUS_FMT_YUYV8_2X8: |
| dev_dbg(&client->dev, "pixel format YUYV8_2X8_LE\n"); |
| coma_mask |= COMA_RGB | COMA_BW | COMA_BYTE_SWAP; |
| coma_set |= COMA_WORD_SWAP; |
| break; |
| case MEDIA_BUS_FMT_YVYU8_2X8: |
| dev_dbg(&client->dev, "pixel format YVYU8_2X8_LE (untested)\n"); |
| coma_mask |= COMA_RGB | COMA_BW | COMA_WORD_SWAP | |
| COMA_BYTE_SWAP; |
| break; |
| case MEDIA_BUS_FMT_UYVY8_2X8: |
| dev_dbg(&client->dev, "pixel format YUYV8_2X8_BE\n"); |
| if (half_scale) { |
| coma_mask |= COMA_RGB | COMA_BW | COMA_WORD_SWAP; |
| coma_set |= COMA_BYTE_SWAP; |
| } else { |
| coma_mask |= COMA_RGB | COMA_BW; |
| coma_set |= COMA_BYTE_SWAP | COMA_WORD_SWAP; |
| } |
| break; |
| case MEDIA_BUS_FMT_VYUY8_2X8: |
| dev_dbg(&client->dev, "pixel format YVYU8_2X8_BE (untested)\n"); |
| if (half_scale) { |
| coma_mask |= COMA_RGB | COMA_BW; |
| coma_set |= COMA_BYTE_SWAP | COMA_WORD_SWAP; |
| } else { |
| coma_mask |= COMA_RGB | COMA_BW | COMA_WORD_SWAP; |
| coma_set |= COMA_BYTE_SWAP; |
| } |
| break; |
| case MEDIA_BUS_FMT_SBGGR8_1X8: |
| dev_dbg(&client->dev, "pixel format SBGGR8_1X8 (untested)\n"); |
| coma_mask |= COMA_BW | COMA_BYTE_SWAP | COMA_WORD_SWAP; |
| coma_set |= COMA_RAW_RGB | COMA_RGB; |
| break; |
| default: |
| dev_err(&client->dev, "Pixel format not handled: 0x%x\n", code); |
| return -EINVAL; |
| } |
| priv->code = code; |
| |
| if (code == MEDIA_BUS_FMT_Y8_1X8 || |
| code == MEDIA_BUS_FMT_SBGGR8_1X8) { |
| coml_mask = COML_ONE_CHANNEL; |
| coml_set = 0; |
| priv->pclk_max = 4000000; |
| } else { |
| coml_mask = 0; |
| coml_set = COML_ONE_CHANNEL; |
| priv->pclk_max = 8000000; |
| } |
| |
| if (code == MEDIA_BUS_FMT_SBGGR8_1X8) |
| priv->colorspace = V4L2_COLORSPACE_SRGB; |
| else if (code != 0) |
| priv->colorspace = V4L2_COLORSPACE_JPEG; |
| |
| if (half_scale) { |
| dev_dbg(&client->dev, "max resolution: QCIF\n"); |
| coma_set |= COMA_QCIF; |
| priv->pclk_max /= 2; |
| } else { |
| dev_dbg(&client->dev, "max resolution: CIF\n"); |
| coma_mask |= COMA_QCIF; |
| } |
| priv->half_scale = half_scale; |
| |
| clkrc = CLKRC_12MHz; |
| mclk = 12000000; |
| priv->pclk_limit = 1334000; |
| dev_dbg(&client->dev, "using 12MHz input clock\n"); |
| |
| clkrc |= to_clkrc(&priv->tpf, priv->pclk_limit, priv->pclk_max); |
| |
| pclk = priv->pclk_max / GET_CLKRC_DIV(clkrc); |
| dev_dbg(&client->dev, "pixel clock divider: %ld.%ld\n", |
| mclk / pclk, 10 * mclk % pclk / pclk); |
| |
| ret = ov6650_set_selection(sd, NULL, &sel); |
| if (!ret) |
| ret = ov6650_reg_rmw(client, REG_COMA, coma_set, coma_mask); |
| if (!ret) |
| ret = ov6650_reg_write(client, REG_CLKRC, clkrc); |
| if (!ret) |
| ret = ov6650_reg_rmw(client, REG_COML, coml_set, coml_mask); |
| |
| if (!ret) { |
| mf->colorspace = priv->colorspace; |
| mf->width = priv->rect.width >> half_scale; |
| mf->height = priv->rect.height >> half_scale; |
| } |
| return ret; |
| } |
| |
| static int ov6650_set_fmt(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *format) |
| { |
| struct v4l2_mbus_framefmt *mf = &format->format; |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct ov6650 *priv = to_ov6650(client); |
| |
| if (format->pad) |
| return -EINVAL; |
| |
| if (is_unscaled_ok(mf->width, mf->height, &priv->rect)) |
| v4l_bound_align_image(&mf->width, 2, W_CIF, 1, |
| &mf->height, 2, H_CIF, 1, 0); |
| |
| mf->field = V4L2_FIELD_NONE; |
| |
| switch (mf->code) { |
| case MEDIA_BUS_FMT_Y10_1X10: |
| mf->code = MEDIA_BUS_FMT_Y8_1X8; |
| /* fall through */ |
| case MEDIA_BUS_FMT_Y8_1X8: |
| case MEDIA_BUS_FMT_YVYU8_2X8: |
| case MEDIA_BUS_FMT_YUYV8_2X8: |
| case MEDIA_BUS_FMT_VYUY8_2X8: |
| case MEDIA_BUS_FMT_UYVY8_2X8: |
| mf->colorspace = V4L2_COLORSPACE_JPEG; |
| break; |
| default: |
| mf->code = MEDIA_BUS_FMT_SBGGR8_1X8; |
| /* fall through */ |
| case MEDIA_BUS_FMT_SBGGR8_1X8: |
| mf->colorspace = V4L2_COLORSPACE_SRGB; |
| break; |
| } |
| |
| if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) |
| return ov6650_s_fmt(sd, mf); |
| cfg->try_fmt = *mf; |
| |
| return 0; |
| } |
| |
| static int ov6650_enum_mbus_code(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_mbus_code_enum *code) |
| { |
| if (code->pad || code->index >= ARRAY_SIZE(ov6650_codes)) |
| return -EINVAL; |
| |
| code->code = ov6650_codes[code->index]; |
| return 0; |
| } |
| |
| static int ov6650_g_frame_interval(struct v4l2_subdev *sd, |
| struct v4l2_subdev_frame_interval *ival) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct ov6650 *priv = to_ov6650(client); |
| |
| ival->interval.numerator = GET_CLKRC_DIV(to_clkrc(&priv->tpf, |
| priv->pclk_limit, priv->pclk_max)); |
| ival->interval.denominator = FRAME_RATE_MAX; |
| |
| dev_dbg(&client->dev, "Frame interval: %u/%u s\n", |
| ival->interval.numerator, ival->interval.denominator); |
| |
| return 0; |
| } |
| |
| static int ov6650_s_frame_interval(struct v4l2_subdev *sd, |
| struct v4l2_subdev_frame_interval *ival) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct ov6650 *priv = to_ov6650(client); |
| struct v4l2_fract *tpf = &ival->interval; |
| int div, ret; |
| u8 clkrc; |
| |
| if (tpf->numerator == 0 || tpf->denominator == 0) |
| div = 1; /* Reset to full rate */ |
| else |
| div = (tpf->numerator * FRAME_RATE_MAX) / tpf->denominator; |
| |
| if (div == 0) |
| div = 1; |
| else if (div > GET_CLKRC_DIV(CLKRC_DIV_MASK)) |
| div = GET_CLKRC_DIV(CLKRC_DIV_MASK); |
| |
| /* |
| * Keep result to be used as tpf limit |
| * for subseqent clock divider calculations |
| */ |
| priv->tpf.numerator = div; |
| priv->tpf.denominator = FRAME_RATE_MAX; |
| |
| clkrc = to_clkrc(&priv->tpf, priv->pclk_limit, priv->pclk_max); |
| |
| ret = ov6650_reg_rmw(client, REG_CLKRC, clkrc, CLKRC_DIV_MASK); |
| if (!ret) { |
| tpf->numerator = GET_CLKRC_DIV(clkrc); |
| tpf->denominator = FRAME_RATE_MAX; |
| } |
| |
| return ret; |
| } |
| |
| /* Soft reset the camera. This has nothing to do with the RESET pin! */ |
| static int ov6650_reset(struct i2c_client *client) |
| { |
| int ret; |
| |
| dev_dbg(&client->dev, "reset\n"); |
| |
| ret = ov6650_reg_rmw(client, REG_COMA, COMA_RESET, 0); |
| if (ret) |
| dev_err(&client->dev, |
| "An error occurred while entering soft reset!\n"); |
| |
| return ret; |
| } |
| |
| /* program default register values */ |
| static int ov6650_prog_dflt(struct i2c_client *client) |
| { |
| int ret; |
| |
| dev_dbg(&client->dev, "initializing\n"); |
| |
| ret = ov6650_reg_write(client, REG_COMA, 0); /* ~COMA_RESET */ |
| if (!ret) |
| ret = ov6650_reg_rmw(client, REG_COMB, 0, COMB_BAND_FILTER); |
| |
| return ret; |
| } |
| |
| static int ov6650_video_probe(struct i2c_client *client) |
| { |
| struct ov6650 *priv = to_ov6650(client); |
| u8 pidh, pidl, midh, midl; |
| int ret; |
| |
| ret = ov6650_s_power(&priv->subdev, 1); |
| if (ret < 0) |
| return ret; |
| |
| /* |
| * check and show product ID and manufacturer ID |
| */ |
| ret = ov6650_reg_read(client, REG_PIDH, &pidh); |
| if (!ret) |
| ret = ov6650_reg_read(client, REG_PIDL, &pidl); |
| if (!ret) |
| ret = ov6650_reg_read(client, REG_MIDH, &midh); |
| if (!ret) |
| ret = ov6650_reg_read(client, REG_MIDL, &midl); |
| |
| if (ret) |
| goto done; |
| |
| if ((pidh != OV6650_PIDH) || (pidl != OV6650_PIDL)) { |
| dev_err(&client->dev, "Product ID error 0x%02x:0x%02x\n", |
| pidh, pidl); |
| ret = -ENODEV; |
| goto done; |
| } |
| |
| dev_info(&client->dev, |
| "ov6650 Product ID 0x%02x:0x%02x Manufacturer ID 0x%02x:0x%02x\n", |
| pidh, pidl, midh, midl); |
| |
| ret = ov6650_reset(client); |
| if (!ret) |
| ret = ov6650_prog_dflt(client); |
| if (!ret) |
| ret = v4l2_ctrl_handler_setup(&priv->hdl); |
| |
| done: |
| ov6650_s_power(&priv->subdev, 0); |
| return ret; |
| } |
| |
| static const struct v4l2_ctrl_ops ov6550_ctrl_ops = { |
| .g_volatile_ctrl = ov6550_g_volatile_ctrl, |
| .s_ctrl = ov6550_s_ctrl, |
| }; |
| |
| static const struct v4l2_subdev_core_ops ov6650_core_ops = { |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| .g_register = ov6650_get_register, |
| .s_register = ov6650_set_register, |
| #endif |
| .s_power = ov6650_s_power, |
| }; |
| |
| /* Request bus settings on camera side */ |
| static int ov6650_g_mbus_config(struct v4l2_subdev *sd, |
| struct v4l2_mbus_config *cfg) |
| { |
| |
| cfg->flags = V4L2_MBUS_MASTER | |
| V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING | |
| V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW | |
| V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW | |
| V4L2_MBUS_DATA_ACTIVE_HIGH; |
| cfg->type = V4L2_MBUS_PARALLEL; |
| |
| return 0; |
| } |
| |
| /* Alter bus settings on camera side */ |
| static int ov6650_s_mbus_config(struct v4l2_subdev *sd, |
| const struct v4l2_mbus_config *cfg) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| int ret; |
| |
| if (cfg->flags & V4L2_MBUS_PCLK_SAMPLE_RISING) |
| ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_PCLK_RISING, 0); |
| else |
| ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_PCLK_RISING); |
| if (ret) |
| return ret; |
| |
| if (cfg->flags & V4L2_MBUS_HSYNC_ACTIVE_LOW) |
| ret = ov6650_reg_rmw(client, REG_COMF, COMF_HREF_LOW, 0); |
| else |
| ret = ov6650_reg_rmw(client, REG_COMF, 0, COMF_HREF_LOW); |
| if (ret) |
| return ret; |
| |
| if (cfg->flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) |
| ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_VSYNC_HIGH, 0); |
| else |
| ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_VSYNC_HIGH); |
| |
| return ret; |
| } |
| |
| static const struct v4l2_subdev_video_ops ov6650_video_ops = { |
| .s_stream = ov6650_s_stream, |
| .g_frame_interval = ov6650_g_frame_interval, |
| .s_frame_interval = ov6650_s_frame_interval, |
| .g_mbus_config = ov6650_g_mbus_config, |
| .s_mbus_config = ov6650_s_mbus_config, |
| }; |
| |
| static const struct v4l2_subdev_pad_ops ov6650_pad_ops = { |
| .enum_mbus_code = ov6650_enum_mbus_code, |
| .get_selection = ov6650_get_selection, |
| .set_selection = ov6650_set_selection, |
| .get_fmt = ov6650_get_fmt, |
| .set_fmt = ov6650_set_fmt, |
| }; |
| |
| static const struct v4l2_subdev_ops ov6650_subdev_ops = { |
| .core = &ov6650_core_ops, |
| .video = &ov6650_video_ops, |
| .pad = &ov6650_pad_ops, |
| }; |
| |
| /* |
| * i2c_driver function |
| */ |
| static int ov6650_probe(struct i2c_client *client, |
| const struct i2c_device_id *did) |
| { |
| struct ov6650 *priv; |
| int ret; |
| |
| priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| v4l2_i2c_subdev_init(&priv->subdev, client, &ov6650_subdev_ops); |
| v4l2_ctrl_handler_init(&priv->hdl, 13); |
| v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops, |
| V4L2_CID_VFLIP, 0, 1, 1, 0); |
| v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops, |
| V4L2_CID_HFLIP, 0, 1, 1, 0); |
| priv->autogain = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops, |
| V4L2_CID_AUTOGAIN, 0, 1, 1, 1); |
| priv->gain = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops, |
| V4L2_CID_GAIN, 0, 0x3f, 1, DEF_GAIN); |
| priv->autowb = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops, |
| V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1); |
| priv->blue = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops, |
| V4L2_CID_BLUE_BALANCE, 0, 0xff, 1, DEF_BLUE); |
| priv->red = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops, |
| V4L2_CID_RED_BALANCE, 0, 0xff, 1, DEF_RED); |
| v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops, |
| V4L2_CID_SATURATION, 0, 0xf, 1, 0x8); |
| v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops, |
| V4L2_CID_HUE, 0, HUE_MASK, 1, DEF_HUE); |
| v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops, |
| V4L2_CID_BRIGHTNESS, 0, 0xff, 1, 0x80); |
| priv->autoexposure = v4l2_ctrl_new_std_menu(&priv->hdl, |
| &ov6550_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, |
| V4L2_EXPOSURE_MANUAL, 0, V4L2_EXPOSURE_AUTO); |
| priv->exposure = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops, |
| V4L2_CID_EXPOSURE, 0, 0xff, 1, DEF_AECH); |
| v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops, |
| V4L2_CID_GAMMA, 0, 0xff, 1, 0x12); |
| |
| priv->subdev.ctrl_handler = &priv->hdl; |
| if (priv->hdl.error) |
| return priv->hdl.error; |
| |
| v4l2_ctrl_auto_cluster(2, &priv->autogain, 0, true); |
| v4l2_ctrl_auto_cluster(3, &priv->autowb, 0, true); |
| v4l2_ctrl_auto_cluster(2, &priv->autoexposure, |
| V4L2_EXPOSURE_MANUAL, true); |
| |
| priv->rect.left = DEF_HSTRT << 1; |
| priv->rect.top = DEF_VSTRT << 1; |
| priv->rect.width = W_CIF; |
| priv->rect.height = H_CIF; |
| priv->half_scale = false; |
| priv->code = MEDIA_BUS_FMT_YUYV8_2X8; |
| priv->colorspace = V4L2_COLORSPACE_JPEG; |
| |
| priv->clk = v4l2_clk_get(&client->dev, NULL); |
| if (IS_ERR(priv->clk)) { |
| ret = PTR_ERR(priv->clk); |
| goto eclkget; |
| } |
| |
| ret = ov6650_video_probe(client); |
| if (ret) { |
| v4l2_clk_put(priv->clk); |
| eclkget: |
| v4l2_ctrl_handler_free(&priv->hdl); |
| } |
| |
| return ret; |
| } |
| |
| static int ov6650_remove(struct i2c_client *client) |
| { |
| struct ov6650 *priv = to_ov6650(client); |
| |
| v4l2_clk_put(priv->clk); |
| v4l2_device_unregister_subdev(&priv->subdev); |
| v4l2_ctrl_handler_free(&priv->hdl); |
| return 0; |
| } |
| |
| static const struct i2c_device_id ov6650_id[] = { |
| { "ov6650", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, ov6650_id); |
| |
| static struct i2c_driver ov6650_i2c_driver = { |
| .driver = { |
| .name = "ov6650", |
| }, |
| .probe = ov6650_probe, |
| .remove = ov6650_remove, |
| .id_table = ov6650_id, |
| }; |
| |
| module_i2c_driver(ov6650_i2c_driver); |
| |
| MODULE_DESCRIPTION("SoC Camera driver for OmniVision OV6650"); |
| MODULE_AUTHOR("Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>"); |
| MODULE_LICENSE("GPL v2"); |