arch/arm/mach-ixp23xx/pci.c - linux - Git at Google

 /*
  * arch/arm/mach-ixp23xx/pci.c
  *
  * PCI routines for IXP23XX based systems
  *
  * Copyright (c) 2005 MontaVista Software, Inc.
  *
  * based on original code:
  *
  * Author: Naeem Afzal <naeem.m.afzal@intel.com>
  * Copyright 2002-2005 Intel Corp.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 of the License, or (at your
  * option) any later version.
  */

 #include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/slab.h>
 #include <linux/delay.h>

 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 #include <asm/system.h>
 #include <asm/mach/pci.h>
 #include <mach/hardware.h>

 extern int (*external_fault) (unsigned long, struct pt_regs *);

 static volatile int pci_master_aborts = 0;

 #ifdef DEBUG
 #define DBG(x...)	printk(x)
 #else
 #define DBG(x...)
 #endif

 int clear_master_aborts(void);

 static u32
 *ixp23xx_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where)
 {
 	u32 *paddress;

 	/*
 	 * Must be dword aligned
 	 */
 	where &= ~3;

 	/*
 	 * For top bus, generate type 0, else type 1
 	 */
 	if (!bus_nr) {
 		if (PCI_SLOT(devfn) >= 8)
 			return 0;

 		paddress = (u32 *) (IXP23XX_PCI_CFG0_VIRT
 				    | (1 << (PCI_SLOT(devfn) + 16))
 				    | (PCI_FUNC(devfn) << 8) | where);
 	} else {
 		paddress = (u32 *) (IXP23XX_PCI_CFG1_VIRT
 				    | (bus_nr << 16)
 				    | (PCI_SLOT(devfn) << 11)
 				    | (PCI_FUNC(devfn) << 8) | where);
 	}

 	return paddress;
 }

 /*
  * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
  * 0 and 3 are not valid indexes...
  */
 static u32 bytemask[] = {
 	/*0*/	0,
 	/*1*/	0xff,
 	/*2*/	0xffff,
 	/*3*/	0,
 	/*4*/	0xffffffff,
 };

 static int ixp23xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 				int where, int size, u32 *value)
 {
 	u32 n;
 	u32 *addr;

 	n = where % 4;

 	DBG("In config_read(%d) %d from dev %d:%d:%d\n", size, where,
 		bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));

 	addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
 	if (!addr)
 		return PCIBIOS_DEVICE_NOT_FOUND;

 	pci_master_aborts = 0;
 	*value = (*addr >> (8*n)) & bytemask[size];
 	if (pci_master_aborts) {
 			pci_master_aborts = 0;
 			*value = 0xffffffff;
 			return PCIBIOS_DEVICE_NOT_FOUND;
 		}

 	return PCIBIOS_SUCCESSFUL;
 }

 /*
  * We don't do error checking on the address for writes.
  * It's assumed that the user checked for the device existing first
  * by doing a read first.
  */
 static int ixp23xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 					int where, int size, u32 value)
 {
 	u32 mask;
 	u32 *addr;
 	u32 temp;

 	mask = ~(bytemask[size] << ((where % 0x4) * 8));
 	addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
 	if (!addr)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	temp = (u32) (value) << ((where % 0x4) * 8);
 	*addr = (*addr & mask) | temp;

 	clear_master_aborts();

 	return PCIBIOS_SUCCESSFUL;
 }

 struct pci_ops ixp23xx_pci_ops = {
 	.read	= ixp23xx_pci_read_config,
 	.write	= ixp23xx_pci_write_config,
 };

 struct pci_bus *ixp23xx_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
 {
 	return pci_scan_bus(sysdata->busnr, &ixp23xx_pci_ops, sysdata);
 }

 int ixp23xx_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 {
 	volatile unsigned long temp;
 	unsigned long flags;

 	pci_master_aborts = 1;

 	local_irq_save(flags);
 	temp = *IXP23XX_PCI_CONTROL;

 	/*
 	 * master abort and cmd tgt err
 	 */
 	if (temp & ((1 << 8) | (1 << 5)))
 		*IXP23XX_PCI_CONTROL = temp;

 	temp = *IXP23XX_PCI_CMDSTAT;

 	if (temp & (1 << 29))
 		*IXP23XX_PCI_CMDSTAT = temp;
 	local_irq_restore(flags);

 	/*
 	 * If it was an imprecise abort, then we need to correct the
 	 * return address to be _after_ the instruction.
 	 */
 	if (fsr & (1 << 10))
 		regs->ARM_pc += 4;

 	return 0;
 }

 int clear_master_aborts(void)
 {
 	volatile u32 temp;

 	temp = *IXP23XX_PCI_CONTROL;

 	/*
 	 * master abort and cmd tgt err
 	 */
 	if (temp & ((1 << 8) | (1 << 5)))
 		*IXP23XX_PCI_CONTROL = temp;

 	temp = *IXP23XX_PCI_CMDSTAT;

 	if (temp & (1 << 29))
 		*IXP23XX_PCI_CMDSTAT = temp;

 	return 0;
 }

 static void __init ixp23xx_pci_common_init(void)
 {
 #ifdef __ARMEB__
 	*IXP23XX_PCI_CONTROL |= 0x20000;	/* set I/O swapping */
 #endif
 	/*
 	 * ADDR_31 needs to be clear for PCI memory access to CPP memory
 	 */
 	*IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_ADDR_31;
 	*IXP23XX_CPP2XSI_CURR_XFER_REG3 |= IXP23XX_CPP2XSI_PSH_OFF;

 	/*
 	 * Select correct memory for PCI inbound transactions
 	 */
 	if (ixp23xx_cpp_boot()) {
 		*IXP23XX_PCI_CPP_ADDR_BITS &= ~(1 << 1);
 	} else {
 		*IXP23XX_PCI_CPP_ADDR_BITS |= (1 << 1);

 		/*
 		 * Enable coherency on A2 silicon.
 		 */
 		if (arch_is_coherent())
 			*IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_COH_OFF;
 	}
 }

 void __init ixp23xx_pci_preinit(void)
 {
 	ixp23xx_pci_common_init();

 	hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS,
 			"PCI config cycle to non-existent device");

 	*IXP23XX_PCI_ADDR_EXT = 0x0000e000;
 }

 /*
  * Prevent PCI layer from seeing the inbound host-bridge resources
  */
 static void __devinit pci_fixup_ixp23xx(struct pci_dev *dev)
 {
 	int i;

 	dev->class &= 0xff;
 	dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
 	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
 		dev->resource[i].start = 0;
 		dev->resource[i].end   = 0;
 		dev->resource[i].flags = 0;
 	}
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9002, pci_fixup_ixp23xx);

 /*
  * IXP2300 systems often have large resource requirements, so we just
  * use our own resource space.
  */
 static struct resource ixp23xx_pci_mem_space = {
 	.start	= IXP23XX_PCI_MEM_START,
 	.end	= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE - 1,
 	.flags	= IORESOURCE_MEM,
 	.name	= "PCI Mem Space"
 };

 static struct resource ixp23xx_pci_io_space = {
 	.start	= 0x00000100,
 	.end	= 0x01ffffff,
 	.flags	= IORESOURCE_IO,
 	.name	= "PCI I/O Space"
 };

 int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys)
 {
 	if (nr >= 1)
 		return 0;

 	sys->resource[0] = &ixp23xx_pci_io_space;
 	sys->resource[1] = &ixp23xx_pci_mem_space;
 	sys->resource[2] = NULL;

 	return 1;
 }

 void __init ixp23xx_pci_slave_init(void)
 {
 	ixp23xx_pci_common_init();
 }
	/*
	* arch/arm/mach-ixp23xx/pci.c
	*
	* PCI routines for IXP23XX based systems
	*
	* Copyright (c) 2005 MontaVista Software, Inc.
	*
	* based on original code:
	*
	* Author: Naeem Afzal <naeem.m.afzal@intel.com>
	* Copyright 2002-2005 Intel Corp.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2 of the License, or (at your
	* option) any later version.
	*/

	#include <linux/sched.h>
	#include <linux/kernel.h>
	#include <linux/pci.h>
	#include <linux/interrupt.h>
	#include <linux/mm.h>
	#include <linux/init.h>
	#include <linux/ioport.h>
	#include <linux/slab.h>
	#include <linux/delay.h>

	#include <asm/io.h>
	#include <asm/irq.h>
	#include <asm/sizes.h>
	#include <asm/system.h>
	#include <asm/mach/pci.h>
	#include <mach/hardware.h>

	extern int (external_fault) (unsigned long, struct pt_regs );

	static volatile int pci_master_aborts = 0;

	#ifdef DEBUG
	#define DBG(x...) printk(x)
	#else
	#define DBG(x...)
	#endif

	int clear_master_aborts(void);

	static u32
	*ixp23xx_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where)
	{
	u32 *paddress;

	/*
	* Must be dword aligned
	*/
	where &= ~3;

	/*
	* For top bus, generate type 0, else type 1
	*/
	if (!bus_nr) {
	if (PCI_SLOT(devfn) >= 8)
	return 0;

	paddress = (u32 *) (IXP23XX_PCI_CFG0_VIRT
	\| (1 << (PCI_SLOT(devfn) + 16))
	\| (PCI_FUNC(devfn) << 8) \| where);
	} else {
	paddress = (u32 *) (IXP23XX_PCI_CFG1_VIRT
	\| (bus_nr << 16)
	\| (PCI_SLOT(devfn) << 11)
	\| (PCI_FUNC(devfn) << 8) \| where);
	}

	return paddress;
	}

	/*
	* Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
	* 0 and 3 are not valid indexes...
	*/
	static u32 bytemask[] = {
	/0/ 0,
	/1/ 0xff,
	/2/ 0xffff,
	/3/ 0,
	/4/ 0xffffffff,
	};

	static int ixp23xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
	int where, int size, u32 *value)
	{
	u32 n;
	u32 *addr;

	n = where % 4;

	DBG("In config_read(%d) %d from dev %d:%d:%d\n", size, where,
	bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));

	addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
	if (!addr)
	return PCIBIOS_DEVICE_NOT_FOUND;

	pci_master_aborts = 0;
	value = (addr >> (8*n)) & bytemask[size];
	if (pci_master_aborts) {
	pci_master_aborts = 0;
	*value = 0xffffffff;
	return PCIBIOS_DEVICE_NOT_FOUND;
	}

	return PCIBIOS_SUCCESSFUL;
	}

	/*
	* We don't do error checking on the address for writes.
	* It's assumed that the user checked for the device existing first
	* by doing a read first.
	*/
	static int ixp23xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
	int where, int size, u32 value)
	{
	u32 mask;
	u32 *addr;
	u32 temp;

	mask = ~(bytemask[size] << ((where % 0x4) * 8));
	addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
	if (!addr)
	return PCIBIOS_DEVICE_NOT_FOUND;
	temp = (u32) (value) << ((where % 0x4) * 8);
	addr = (addr & mask) \| temp;

	clear_master_aborts();

	return PCIBIOS_SUCCESSFUL;
	}

	struct pci_ops ixp23xx_pci_ops = {
	.read = ixp23xx_pci_read_config,
	.write = ixp23xx_pci_write_config,
	};

	struct pci_bus ixp23xx_pci_scan_bus(int nr, struct pci_sys_data sysdata)
	{
	return pci_scan_bus(sysdata->busnr, &ixp23xx_pci_ops, sysdata);
	}

	int ixp23xx_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
	{
	volatile unsigned long temp;
	unsigned long flags;

	pci_master_aborts = 1;

	local_irq_save(flags);
	temp = *IXP23XX_PCI_CONTROL;

	/*
	* master abort and cmd tgt err
	*/
	if (temp & ((1 << 8) \| (1 << 5)))
	*IXP23XX_PCI_CONTROL = temp;

	temp = *IXP23XX_PCI_CMDSTAT;

	if (temp & (1 << 29))
	*IXP23XX_PCI_CMDSTAT = temp;
	local_irq_restore(flags);

	/*
	* If it was an imprecise abort, then we need to correct the
	* return address to be _after_ the instruction.
	*/
	if (fsr & (1 << 10))
	regs->ARM_pc += 4;

	return 0;
	}

	int clear_master_aborts(void)
	{
	volatile u32 temp;

	temp = *IXP23XX_PCI_CONTROL;

	/*
	* master abort and cmd tgt err
	*/
	if (temp & ((1 << 8) \| (1 << 5)))
	*IXP23XX_PCI_CONTROL = temp;

	temp = *IXP23XX_PCI_CMDSTAT;

	if (temp & (1 << 29))
	*IXP23XX_PCI_CMDSTAT = temp;

	return 0;
	}

	static void __init ixp23xx_pci_common_init(void)
	{
	#ifdef __ARMEB__
	IXP23XX_PCI_CONTROL \|= 0x20000; / set I/O swapping */
	#endif
	/*
	* ADDR_31 needs to be clear for PCI memory access to CPP memory
	*/
	*IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_ADDR_31;
	*IXP23XX_CPP2XSI_CURR_XFER_REG3 \|= IXP23XX_CPP2XSI_PSH_OFF;

	/*
	* Select correct memory for PCI inbound transactions
	*/
	if (ixp23xx_cpp_boot()) {
	*IXP23XX_PCI_CPP_ADDR_BITS &= ~(1 << 1);
	} else {
	*IXP23XX_PCI_CPP_ADDR_BITS \|= (1 << 1);

	/*
	* Enable coherency on A2 silicon.
	*/
	if (arch_is_coherent())
	*IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_COH_OFF;
	}
	}

	void __init ixp23xx_pci_preinit(void)
	{
	ixp23xx_pci_common_init();

	hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS,
	"PCI config cycle to non-existent device");

	*IXP23XX_PCI_ADDR_EXT = 0x0000e000;
	}

	/*
	* Prevent PCI layer from seeing the inbound host-bridge resources
	*/
	static void __devinit pci_fixup_ixp23xx(struct pci_dev *dev)
	{
	int i;

	dev->class &= 0xff;
	dev->class \|= PCI_CLASS_BRIDGE_HOST << 8;
	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
	dev->resource[i].start = 0;
	dev->resource[i].end = 0;
	dev->resource[i].flags = 0;
	}
	}
	DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9002, pci_fixup_ixp23xx);

	/*
	* IXP2300 systems often have large resource requirements, so we just
	* use our own resource space.
	*/
	static struct resource ixp23xx_pci_mem_space = {
	.start = IXP23XX_PCI_MEM_START,
	.end = IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE - 1,
	.flags = IORESOURCE_MEM,
	.name = "PCI Mem Space"
	};

	static struct resource ixp23xx_pci_io_space = {
	.start = 0x00000100,
	.end = 0x01ffffff,
	.flags = IORESOURCE_IO,
	.name = "PCI I/O Space"
	};

	int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys)
	{
	if (nr >= 1)
	return 0;

	sys->resource[0] = &ixp23xx_pci_io_space;
	sys->resource[1] = &ixp23xx_pci_mem_space;
	sys->resource[2] = NULL;

	return 1;
	}

	void __init ixp23xx_pci_slave_init(void)
	{
	ixp23xx_pci_common_init();
	}