| /* |
| * Blackfin CPLB initialization |
| * |
| * Copyright 2004-2007 Analog Devices Inc. |
| * |
| * Bugs: Enter bugs at http://blackfin.uclinux.org/ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, see the file COPYING, or write |
| * to the Free Software Foundation, Inc., |
| * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| #include <linux/module.h> |
| |
| #include <asm/blackfin.h> |
| #include <asm/cplb.h> |
| #include <asm/cplbinit.h> |
| |
| #define CPLB_MEM CONFIG_MAX_MEM_SIZE |
| |
| /* |
| * Number of required data CPLB switchtable entries |
| * MEMSIZE / 4 (we mostly install 4M page size CPLBs |
| * approx 16 for smaller 1MB page size CPLBs for allignment purposes |
| * 1 for L1 Data Memory |
| * possibly 1 for L2 Data Memory |
| * 1 for CONFIG_DEBUG_HUNT_FOR_ZERO |
| * 1 for ASYNC Memory |
| */ |
| #define MAX_SWITCH_D_CPLBS (((CPLB_MEM / 4) + 16 + 1 + 1 + 1 \ |
| + ASYNC_MEMORY_CPLB_COVERAGE) * 2) |
| |
| /* |
| * Number of required instruction CPLB switchtable entries |
| * MEMSIZE / 4 (we mostly install 4M page size CPLBs |
| * approx 12 for smaller 1MB page size CPLBs for allignment purposes |
| * 1 for L1 Instruction Memory |
| * possibly 1 for L2 Instruction Memory |
| * 1 for CONFIG_DEBUG_HUNT_FOR_ZERO |
| */ |
| #define MAX_SWITCH_I_CPLBS (((CPLB_MEM / 4) + 12 + 1 + 1 + 1) * 2) |
| |
| |
| u_long icplb_table[MAX_CPLBS + 1]; |
| u_long dcplb_table[MAX_CPLBS + 1]; |
| |
| #ifdef CONFIG_CPLB_SWITCH_TAB_L1 |
| # define PDT_ATTR __attribute__((l1_data)) |
| #else |
| # define PDT_ATTR |
| #endif |
| |
| u_long ipdt_table[MAX_SWITCH_I_CPLBS + 1] PDT_ATTR; |
| u_long dpdt_table[MAX_SWITCH_D_CPLBS + 1] PDT_ATTR; |
| |
| #ifdef CONFIG_CPLB_INFO |
| u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS] PDT_ATTR; |
| u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS] PDT_ATTR; |
| #endif |
| |
| struct s_cplb { |
| struct cplb_tab init_i; |
| struct cplb_tab init_d; |
| struct cplb_tab switch_i; |
| struct cplb_tab switch_d; |
| }; |
| |
| #if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE) |
| static struct cplb_desc cplb_data[] = { |
| { |
| .start = 0, |
| .end = SIZE_1K, |
| .psize = SIZE_1K, |
| .attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB, |
| .i_conf = SDRAM_OOPS, |
| .d_conf = SDRAM_OOPS, |
| #if defined(CONFIG_DEBUG_HUNT_FOR_ZERO) |
| .valid = 1, |
| #else |
| .valid = 0, |
| #endif |
| .name = "Zero Pointer Guard Page", |
| }, |
| { |
| .start = L1_CODE_START, |
| .end = L1_CODE_START + L1_CODE_LENGTH, |
| .psize = SIZE_4M, |
| .attr = INITIAL_T | SWITCH_T | I_CPLB, |
| .i_conf = L1_IMEMORY, |
| .d_conf = 0, |
| .valid = 1, |
| .name = "L1 I-Memory", |
| }, |
| { |
| .start = L1_DATA_A_START, |
| .end = L1_DATA_B_START + L1_DATA_B_LENGTH, |
| .psize = SIZE_4M, |
| .attr = INITIAL_T | SWITCH_T | D_CPLB, |
| .i_conf = 0, |
| .d_conf = L1_DMEMORY, |
| #if ((L1_DATA_A_LENGTH > 0) || (L1_DATA_B_LENGTH > 0)) |
| .valid = 1, |
| #else |
| .valid = 0, |
| #endif |
| .name = "L1 D-Memory", |
| }, |
| { |
| .start = 0, |
| .end = 0, /* dynamic */ |
| .psize = 0, |
| .attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB, |
| .i_conf = SDRAM_IGENERIC, |
| .d_conf = SDRAM_DGENERIC, |
| .valid = 1, |
| .name = "Kernel Memory", |
| }, |
| { |
| .start = 0, /* dynamic */ |
| .end = 0, /* dynamic */ |
| .psize = 0, |
| .attr = INITIAL_T | SWITCH_T | D_CPLB, |
| .i_conf = SDRAM_IGENERIC, |
| .d_conf = SDRAM_DNON_CHBL, |
| .valid = 1, |
| .name = "uClinux MTD Memory", |
| }, |
| { |
| .start = 0, /* dynamic */ |
| .end = 0, /* dynamic */ |
| .psize = SIZE_1M, |
| .attr = INITIAL_T | SWITCH_T | D_CPLB, |
| .d_conf = SDRAM_DNON_CHBL, |
| .valid = 1, |
| .name = "Uncached DMA Zone", |
| }, |
| { |
| .start = 0, /* dynamic */ |
| .end = 0, /* dynamic */ |
| .psize = 0, |
| .attr = SWITCH_T | D_CPLB, |
| .i_conf = 0, /* dynamic */ |
| .d_conf = 0, /* dynamic */ |
| .valid = 1, |
| .name = "Reserved Memory", |
| }, |
| { |
| .start = ASYNC_BANK0_BASE, |
| .end = ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE, |
| .psize = 0, |
| .attr = SWITCH_T | D_CPLB, |
| .d_conf = SDRAM_EBIU, |
| .valid = 1, |
| .name = "Asynchronous Memory Banks", |
| }, |
| { |
| .start = L2_START, |
| .end = L2_START + L2_LENGTH, |
| .psize = SIZE_1M, |
| .attr = SWITCH_T | I_CPLB | D_CPLB, |
| .i_conf = L2_MEMORY, |
| .d_conf = L2_MEMORY, |
| .valid = (L2_LENGTH > 0), |
| .name = "L2 Memory", |
| }, |
| { |
| .start = BOOT_ROM_START, |
| .end = BOOT_ROM_START + BOOT_ROM_LENGTH, |
| .psize = SIZE_1M, |
| .attr = SWITCH_T | I_CPLB | D_CPLB, |
| .i_conf = SDRAM_IGENERIC, |
| .d_conf = SDRAM_DGENERIC, |
| .valid = 1, |
| .name = "On-Chip BootROM", |
| }, |
| }; |
| |
| static u16 __init lock_kernel_check(u32 start, u32 end) |
| { |
| if ((end <= (u32) _end && end >= (u32)_stext) || |
| (start <= (u32) _end && start >= (u32)_stext)) |
| return IN_KERNEL; |
| return 0; |
| } |
| |
| static unsigned short __init |
| fill_cplbtab(struct cplb_tab *table, |
| unsigned long start, unsigned long end, |
| unsigned long block_size, unsigned long cplb_data) |
| { |
| int i; |
| |
| switch (block_size) { |
| case SIZE_4M: |
| i = 3; |
| break; |
| case SIZE_1M: |
| i = 2; |
| break; |
| case SIZE_4K: |
| i = 1; |
| break; |
| case SIZE_1K: |
| default: |
| i = 0; |
| break; |
| } |
| |
| cplb_data = (cplb_data & ~(3 << 16)) | (i << 16); |
| |
| while ((start < end) && (table->pos < table->size)) { |
| |
| table->tab[table->pos++] = start; |
| |
| if (lock_kernel_check(start, start + block_size) == IN_KERNEL) |
| table->tab[table->pos++] = |
| cplb_data | CPLB_LOCK | CPLB_DIRTY; |
| else |
| table->tab[table->pos++] = cplb_data; |
| |
| start += block_size; |
| } |
| return 0; |
| } |
| |
| static unsigned short __init |
| close_cplbtab(struct cplb_tab *table) |
| { |
| |
| while (table->pos < table->size) { |
| |
| table->tab[table->pos++] = 0; |
| table->tab[table->pos++] = 0; /* !CPLB_VALID */ |
| } |
| return 0; |
| } |
| |
| /* helper function */ |
| static void __init |
| __fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end) |
| { |
| if (cplb_data[i].psize) { |
| fill_cplbtab(t, |
| cplb_data[i].start, |
| cplb_data[i].end, |
| cplb_data[i].psize, |
| cplb_data[i].i_conf); |
| } else { |
| #if defined(CONFIG_BFIN_ICACHE) |
| if (ANOMALY_05000263 && i == SDRAM_KERN) { |
| fill_cplbtab(t, |
| cplb_data[i].start, |
| cplb_data[i].end, |
| SIZE_4M, |
| cplb_data[i].i_conf); |
| } else |
| #endif |
| { |
| fill_cplbtab(t, |
| cplb_data[i].start, |
| a_start, |
| SIZE_1M, |
| cplb_data[i].i_conf); |
| fill_cplbtab(t, |
| a_start, |
| a_end, |
| SIZE_4M, |
| cplb_data[i].i_conf); |
| fill_cplbtab(t, a_end, |
| cplb_data[i].end, |
| SIZE_1M, |
| cplb_data[i].i_conf); |
| } |
| } |
| } |
| |
| static void __init |
| __fill_data_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end) |
| { |
| if (cplb_data[i].psize) { |
| fill_cplbtab(t, |
| cplb_data[i].start, |
| cplb_data[i].end, |
| cplb_data[i].psize, |
| cplb_data[i].d_conf); |
| } else { |
| fill_cplbtab(t, |
| cplb_data[i].start, |
| a_start, SIZE_1M, |
| cplb_data[i].d_conf); |
| fill_cplbtab(t, a_start, |
| a_end, SIZE_4M, |
| cplb_data[i].d_conf); |
| fill_cplbtab(t, a_end, |
| cplb_data[i].end, |
| SIZE_1M, |
| cplb_data[i].d_conf); |
| } |
| } |
| |
| void __init generate_cpl_tables(void) |
| { |
| |
| u16 i, j, process; |
| u32 a_start, a_end, as, ae, as_1m; |
| |
| struct cplb_tab *t_i = NULL; |
| struct cplb_tab *t_d = NULL; |
| struct s_cplb cplb; |
| |
| printk(KERN_INFO "NOMPU: setting up cplb tables for global access\n"); |
| |
| cplb.init_i.size = MAX_CPLBS; |
| cplb.init_d.size = MAX_CPLBS; |
| cplb.switch_i.size = MAX_SWITCH_I_CPLBS; |
| cplb.switch_d.size = MAX_SWITCH_D_CPLBS; |
| |
| cplb.init_i.pos = 0; |
| cplb.init_d.pos = 0; |
| cplb.switch_i.pos = 0; |
| cplb.switch_d.pos = 0; |
| |
| cplb.init_i.tab = icplb_table; |
| cplb.init_d.tab = dcplb_table; |
| cplb.switch_i.tab = ipdt_table; |
| cplb.switch_d.tab = dpdt_table; |
| |
| cplb_data[SDRAM_KERN].end = memory_end; |
| |
| #ifdef CONFIG_MTD_UCLINUX |
| cplb_data[SDRAM_RAM_MTD].start = memory_mtd_start; |
| cplb_data[SDRAM_RAM_MTD].end = memory_mtd_start + mtd_size; |
| cplb_data[SDRAM_RAM_MTD].valid = mtd_size > 0; |
| # if defined(CONFIG_ROMFS_FS) |
| cplb_data[SDRAM_RAM_MTD].attr |= I_CPLB; |
| |
| /* |
| * The ROMFS_FS size is often not multiple of 1MB. |
| * This can cause multiple CPLB sets covering the same memory area. |
| * This will then cause multiple CPLB hit exceptions. |
| * Workaround: We ensure a contiguous memory area by extending the kernel |
| * memory section over the mtd section. |
| * For ROMFS_FS memory must be covered with ICPLBs anyways. |
| * So there is no difference between kernel and mtd memory setup. |
| */ |
| |
| cplb_data[SDRAM_KERN].end = memory_mtd_start + mtd_size;; |
| cplb_data[SDRAM_RAM_MTD].valid = 0; |
| |
| # endif |
| #else |
| cplb_data[SDRAM_RAM_MTD].valid = 0; |
| #endif |
| |
| cplb_data[SDRAM_DMAZ].start = _ramend - DMA_UNCACHED_REGION; |
| cplb_data[SDRAM_DMAZ].end = _ramend; |
| |
| cplb_data[RES_MEM].start = _ramend; |
| cplb_data[RES_MEM].end = physical_mem_end; |
| |
| if (reserved_mem_dcache_on) |
| cplb_data[RES_MEM].d_conf = SDRAM_DGENERIC; |
| else |
| cplb_data[RES_MEM].d_conf = SDRAM_DNON_CHBL; |
| |
| if (reserved_mem_icache_on) |
| cplb_data[RES_MEM].i_conf = SDRAM_IGENERIC; |
| else |
| cplb_data[RES_MEM].i_conf = SDRAM_INON_CHBL; |
| |
| for (i = ZERO_P; i < ARRAY_SIZE(cplb_data); ++i) { |
| if (!cplb_data[i].valid) |
| continue; |
| |
| as_1m = cplb_data[i].start % SIZE_1M; |
| |
| /* We need to make sure all sections are properly 1M aligned |
| * However between Kernel Memory and the Kernel mtd section, depending on the |
| * rootfs size, there can be overlapping memory areas. |
| */ |
| |
| if (as_1m && i != L1I_MEM && i != L1D_MEM) { |
| #ifdef CONFIG_MTD_UCLINUX |
| if (i == SDRAM_RAM_MTD) { |
| if ((cplb_data[SDRAM_KERN].end + 1) > cplb_data[SDRAM_RAM_MTD].start) |
| cplb_data[SDRAM_RAM_MTD].start = (cplb_data[i].start & (-2*SIZE_1M)) + SIZE_1M; |
| else |
| cplb_data[SDRAM_RAM_MTD].start = (cplb_data[i].start & (-2*SIZE_1M)); |
| } else |
| #endif |
| printk(KERN_WARNING "Unaligned Start of %s at 0x%X\n", |
| cplb_data[i].name, cplb_data[i].start); |
| } |
| |
| as = cplb_data[i].start % SIZE_4M; |
| ae = cplb_data[i].end % SIZE_4M; |
| |
| if (as) |
| a_start = cplb_data[i].start + (SIZE_4M - (as)); |
| else |
| a_start = cplb_data[i].start; |
| |
| a_end = cplb_data[i].end - ae; |
| |
| for (j = INITIAL_T; j <= SWITCH_T; j++) { |
| |
| switch (j) { |
| case INITIAL_T: |
| if (cplb_data[i].attr & INITIAL_T) { |
| t_i = &cplb.init_i; |
| t_d = &cplb.init_d; |
| process = 1; |
| } else |
| process = 0; |
| break; |
| case SWITCH_T: |
| if (cplb_data[i].attr & SWITCH_T) { |
| t_i = &cplb.switch_i; |
| t_d = &cplb.switch_d; |
| process = 1; |
| } else |
| process = 0; |
| break; |
| default: |
| process = 0; |
| break; |
| } |
| |
| if (!process) |
| continue; |
| if (cplb_data[i].attr & I_CPLB) |
| __fill_code_cplbtab(t_i, i, a_start, a_end); |
| |
| if (cplb_data[i].attr & D_CPLB) |
| __fill_data_cplbtab(t_d, i, a_start, a_end); |
| } |
| } |
| |
| /* close tables */ |
| |
| close_cplbtab(&cplb.init_i); |
| close_cplbtab(&cplb.init_d); |
| |
| cplb.init_i.tab[cplb.init_i.pos] = -1; |
| cplb.init_d.tab[cplb.init_d.pos] = -1; |
| cplb.switch_i.tab[cplb.switch_i.pos] = -1; |
| cplb.switch_d.tab[cplb.switch_d.pos] = -1; |
| |
| } |
| |
| #endif |
| |