| /***************************************************************************/ |
| |
| /* |
| * linux/arch/m68knommu/platform/5272/config.c |
| * |
| * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com) |
| * Copyright (C) 2001-2002, SnapGear Inc. (www.snapgear.com) |
| */ |
| |
| /***************************************************************************/ |
| |
| #include <linux/kernel.h> |
| #include <linux/param.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <asm/machdep.h> |
| #include <asm/coldfire.h> |
| #include <asm/mcfsim.h> |
| #include <asm/mcfuart.h> |
| |
| /***************************************************************************/ |
| |
| void coldfire_reset(void); |
| |
| extern unsigned int mcf_timervector; |
| extern unsigned int mcf_profilevector; |
| extern unsigned int mcf_timerlevel; |
| |
| /***************************************************************************/ |
| |
| /* |
| * Some platforms need software versions of the GPIO data registers. |
| */ |
| unsigned short ppdata; |
| unsigned char ledbank = 0xff; |
| |
| /***************************************************************************/ |
| |
| static struct mcf_platform_uart m5272_uart_platform[] = { |
| { |
| .mapbase = MCF_MBAR + MCFUART_BASE1, |
| .irq = 73, |
| }, |
| { |
| .mapbase = MCF_MBAR + MCFUART_BASE2, |
| .irq = 74, |
| }, |
| { }, |
| }; |
| |
| static struct platform_device m5272_uart = { |
| .name = "mcfuart", |
| .id = 0, |
| .dev.platform_data = m5272_uart_platform, |
| }; |
| |
| static struct platform_device *m5272_devices[] __initdata = { |
| &m5272_uart, |
| }; |
| |
| /***************************************************************************/ |
| |
| static void __init m5272_uart_init_line(int line, int irq) |
| { |
| u32 v; |
| |
| if ((line >= 0) && (line < 2)) { |
| v = (line) ? 0x0e000000 : 0xe0000000; |
| writel(v, MCF_MBAR + MCFSIM_ICR2); |
| |
| /* Enable the output lines for the serial ports */ |
| v = readl(MCF_MBAR + MCFSIM_PBCNT); |
| v = (v & ~0x000000ff) | 0x00000055; |
| writel(v, MCF_MBAR + MCFSIM_PBCNT); |
| |
| v = readl(MCF_MBAR + MCFSIM_PDCNT); |
| v = (v & ~0x000003fc) | 0x000002a8; |
| writel(v, MCF_MBAR + MCFSIM_PDCNT); |
| } |
| } |
| |
| static void __init m5272_uarts_init(void) |
| { |
| const int nrlines = ARRAY_SIZE(m5272_uart_platform); |
| int line; |
| |
| for (line = 0; (line < nrlines); line++) |
| m5272_uart_init_line(line, m5272_uart_platform[line].irq); |
| } |
| |
| /***************************************************************************/ |
| |
| void mcf_disableall(void) |
| { |
| volatile unsigned long *icrp; |
| |
| icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); |
| icrp[0] = 0x88888888; |
| icrp[1] = 0x88888888; |
| icrp[2] = 0x88888888; |
| icrp[3] = 0x88888888; |
| } |
| |
| /***************************************************************************/ |
| |
| void mcf_autovector(unsigned int vec) |
| { |
| /* Everything is auto-vectored on the 5272 */ |
| } |
| |
| /***************************************************************************/ |
| |
| void mcf_settimericr(int timer, int level) |
| { |
| volatile unsigned long *icrp; |
| |
| if ((timer >= 1 ) && (timer <= 4)) { |
| icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); |
| *icrp = (0x8 | level) << ((4 - timer) * 4); |
| } |
| } |
| |
| /***************************************************************************/ |
| |
| void __init config_BSP(char *commandp, int size) |
| { |
| #if defined (CONFIG_MOD5272) |
| volatile unsigned char *pivrp; |
| |
| /* Set base of device vectors to be 64 */ |
| pivrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_PIVR); |
| *pivrp = 0x40; |
| #endif |
| |
| mcf_disableall(); |
| |
| #if defined(CONFIG_NETtel) || defined(CONFIG_SCALES) |
| /* Copy command line from FLASH to local buffer... */ |
| memcpy(commandp, (char *) 0xf0004000, size); |
| commandp[size-1] = 0; |
| #elif defined(CONFIG_CANCam) |
| /* Copy command line from FLASH to local buffer... */ |
| memcpy(commandp, (char *) 0xf0010000, size); |
| commandp[size-1] = 0; |
| #endif |
| |
| mcf_timervector = 69; |
| mcf_profilevector = 70; |
| mach_reset = coldfire_reset; |
| } |
| |
| /***************************************************************************/ |
| |
| static int __init init_BSP(void) |
| { |
| m5272_uarts_init(); |
| platform_add_devices(m5272_devices, ARRAY_SIZE(m5272_devices)); |
| return 0; |
| } |
| |
| arch_initcall(init_BSP); |
| |
| /***************************************************************************/ |