| /* |
| * sis5595.c - Part of lm_sensors, Linux kernel modules |
| * for hardware monitoring |
| * |
| * Copyright (C) 1998 - 2001 Frodo Looijaard <frodol@dds.nl>, |
| * Kyösti Mälkki <kmalkki@cc.hut.fi>, and |
| * Mark D. Studebaker <mdsxyz123@yahoo.com> |
| * Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with |
| * the help of Jean Delvare <jdelvare@suse.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| /* |
| * SiS southbridge has a LM78-like chip integrated on the same IC. |
| * This driver is a customized copy of lm78.c |
| * |
| * Supports following revisions: |
| * Version PCI ID PCI Revision |
| * 1 1039/0008 AF or less |
| * 2 1039/0008 B0 or greater |
| * |
| * Note: these chips contain a 0008 device which is incompatible with the |
| * 5595. We recognize these by the presence of the listed |
| * "blacklist" PCI ID and refuse to load. |
| * |
| * NOT SUPPORTED PCI ID BLACKLIST PCI ID |
| * 540 0008 0540 |
| * 550 0008 0550 |
| * 5513 0008 5511 |
| * 5581 0008 5597 |
| * 5582 0008 5597 |
| * 5597 0008 5597 |
| * 5598 0008 5597/5598 |
| * 630 0008 0630 |
| * 645 0008 0645 |
| * 730 0008 0730 |
| * 735 0008 0735 |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/ioport.h> |
| #include <linux/pci.h> |
| #include <linux/platform_device.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/jiffies.h> |
| #include <linux/mutex.h> |
| #include <linux/sysfs.h> |
| #include <linux/acpi.h> |
| #include <linux/io.h> |
| |
| /* |
| * If force_addr is set to anything different from 0, we forcibly enable |
| * the device at the given address. |
| */ |
| static u16 force_addr; |
| module_param(force_addr, ushort, 0); |
| MODULE_PARM_DESC(force_addr, |
| "Initialize the base address of the sensors"); |
| |
| static struct platform_device *pdev; |
| |
| /* Many SIS5595 constants specified below */ |
| |
| /* Length of ISA address segment */ |
| #define SIS5595_EXTENT 8 |
| /* PCI Config Registers */ |
| #define SIS5595_BASE_REG 0x68 |
| #define SIS5595_PIN_REG 0x7A |
| #define SIS5595_ENABLE_REG 0x7B |
| |
| /* Where are the ISA address/data registers relative to the base address */ |
| #define SIS5595_ADDR_REG_OFFSET 5 |
| #define SIS5595_DATA_REG_OFFSET 6 |
| |
| /* The SIS5595 registers */ |
| #define SIS5595_REG_IN_MAX(nr) (0x2b + (nr) * 2) |
| #define SIS5595_REG_IN_MIN(nr) (0x2c + (nr) * 2) |
| #define SIS5595_REG_IN(nr) (0x20 + (nr)) |
| |
| #define SIS5595_REG_FAN_MIN(nr) (0x3b + (nr)) |
| #define SIS5595_REG_FAN(nr) (0x28 + (nr)) |
| |
| /* |
| * On the first version of the chip, the temp registers are separate. |
| * On the second version, |
| * TEMP pin is shared with IN4, configured in PCI register 0x7A. |
| * The registers are the same as well. |
| * OVER and HYST are really MAX and MIN. |
| */ |
| |
| #define REV2MIN 0xb0 |
| #define SIS5595_REG_TEMP (((data->revision) >= REV2MIN) ? \ |
| SIS5595_REG_IN(4) : 0x27) |
| #define SIS5595_REG_TEMP_OVER (((data->revision) >= REV2MIN) ? \ |
| SIS5595_REG_IN_MAX(4) : 0x39) |
| #define SIS5595_REG_TEMP_HYST (((data->revision) >= REV2MIN) ? \ |
| SIS5595_REG_IN_MIN(4) : 0x3a) |
| |
| #define SIS5595_REG_CONFIG 0x40 |
| #define SIS5595_REG_ALARM1 0x41 |
| #define SIS5595_REG_ALARM2 0x42 |
| #define SIS5595_REG_FANDIV 0x47 |
| |
| /* |
| * Conversions. Limit checking is only done on the TO_REG |
| * variants. |
| */ |
| |
| /* |
| * IN: mV, (0V to 4.08V) |
| * REG: 16mV/bit |
| */ |
| static inline u8 IN_TO_REG(unsigned long val) |
| { |
| unsigned long nval = clamp_val(val, 0, 4080); |
| return (nval + 8) / 16; |
| } |
| #define IN_FROM_REG(val) ((val) * 16) |
| |
| static inline u8 FAN_TO_REG(long rpm, int div) |
| { |
| if (rpm <= 0) |
| return 255; |
| if (rpm > 1350000) |
| return 1; |
| return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254); |
| } |
| |
| static inline int FAN_FROM_REG(u8 val, int div) |
| { |
| return val == 0 ? -1 : val == 255 ? 0 : 1350000 / (val * div); |
| } |
| |
| /* |
| * TEMP: mC (-54.12C to +157.53C) |
| * REG: 0.83C/bit + 52.12, two's complement |
| */ |
| static inline int TEMP_FROM_REG(s8 val) |
| { |
| return val * 830 + 52120; |
| } |
| static inline s8 TEMP_TO_REG(long val) |
| { |
| int nval = clamp_val(val, -54120, 157530) ; |
| return nval < 0 ? (nval - 5212 - 415) / 830 : (nval - 5212 + 415) / 830; |
| } |
| |
| /* |
| * FAN DIV: 1, 2, 4, or 8 (defaults to 2) |
| * REG: 0, 1, 2, or 3 (respectively) (defaults to 1) |
| */ |
| static inline u8 DIV_TO_REG(int val) |
| { |
| return val == 8 ? 3 : val == 4 ? 2 : val == 1 ? 0 : 1; |
| } |
| #define DIV_FROM_REG(val) (1 << (val)) |
| |
| /* |
| * For each registered chip, we need to keep some data in memory. |
| * The structure is dynamically allocated. |
| */ |
| struct sis5595_data { |
| unsigned short addr; |
| const char *name; |
| struct device *hwmon_dev; |
| struct mutex lock; |
| |
| struct mutex update_lock; |
| char valid; /* !=0 if following fields are valid */ |
| unsigned long last_updated; /* In jiffies */ |
| char maxins; /* == 3 if temp enabled, otherwise == 4 */ |
| u8 revision; /* Reg. value */ |
| |
| u8 in[5]; /* Register value */ |
| u8 in_max[5]; /* Register value */ |
| u8 in_min[5]; /* Register value */ |
| u8 fan[2]; /* Register value */ |
| u8 fan_min[2]; /* Register value */ |
| s8 temp; /* Register value */ |
| s8 temp_over; /* Register value */ |
| s8 temp_hyst; /* Register value */ |
| u8 fan_div[2]; /* Register encoding, shifted right */ |
| u16 alarms; /* Register encoding, combined */ |
| }; |
| |
| static struct pci_dev *s_bridge; /* pointer to the (only) sis5595 */ |
| |
| static int sis5595_probe(struct platform_device *pdev); |
| static int sis5595_remove(struct platform_device *pdev); |
| |
| static int sis5595_read_value(struct sis5595_data *data, u8 reg); |
| static void sis5595_write_value(struct sis5595_data *data, u8 reg, u8 value); |
| static struct sis5595_data *sis5595_update_device(struct device *dev); |
| static void sis5595_init_device(struct sis5595_data *data); |
| |
| static struct platform_driver sis5595_driver = { |
| .driver = { |
| .name = "sis5595", |
| }, |
| .probe = sis5595_probe, |
| .remove = sis5595_remove, |
| }; |
| |
| /* 4 Voltages */ |
| static ssize_t in_show(struct device *dev, struct device_attribute *da, |
| char *buf) |
| { |
| struct sis5595_data *data = sis5595_update_device(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| int nr = attr->index; |
| return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr])); |
| } |
| |
| static ssize_t in_min_show(struct device *dev, struct device_attribute *da, |
| char *buf) |
| { |
| struct sis5595_data *data = sis5595_update_device(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| int nr = attr->index; |
| return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr])); |
| } |
| |
| static ssize_t in_max_show(struct device *dev, struct device_attribute *da, |
| char *buf) |
| { |
| struct sis5595_data *data = sis5595_update_device(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| int nr = attr->index; |
| return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr])); |
| } |
| |
| static ssize_t in_min_store(struct device *dev, struct device_attribute *da, |
| const char *buf, size_t count) |
| { |
| struct sis5595_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| int nr = attr->index; |
| unsigned long val; |
| int err; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err) |
| return err; |
| |
| mutex_lock(&data->update_lock); |
| data->in_min[nr] = IN_TO_REG(val); |
| sis5595_write_value(data, SIS5595_REG_IN_MIN(nr), data->in_min[nr]); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| |
| static ssize_t in_max_store(struct device *dev, struct device_attribute *da, |
| const char *buf, size_t count) |
| { |
| struct sis5595_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| int nr = attr->index; |
| unsigned long val; |
| int err; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err) |
| return err; |
| |
| mutex_lock(&data->update_lock); |
| data->in_max[nr] = IN_TO_REG(val); |
| sis5595_write_value(data, SIS5595_REG_IN_MAX(nr), data->in_max[nr]); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| |
| static SENSOR_DEVICE_ATTR_RO(in0_input, in, 0); |
| static SENSOR_DEVICE_ATTR_RW(in0_min, in_min, 0); |
| static SENSOR_DEVICE_ATTR_RW(in0_max, in_max, 0); |
| static SENSOR_DEVICE_ATTR_RO(in1_input, in, 1); |
| static SENSOR_DEVICE_ATTR_RW(in1_min, in_min, 1); |
| static SENSOR_DEVICE_ATTR_RW(in1_max, in_max, 1); |
| static SENSOR_DEVICE_ATTR_RO(in2_input, in, 2); |
| static SENSOR_DEVICE_ATTR_RW(in2_min, in_min, 2); |
| static SENSOR_DEVICE_ATTR_RW(in2_max, in_max, 2); |
| static SENSOR_DEVICE_ATTR_RO(in3_input, in, 3); |
| static SENSOR_DEVICE_ATTR_RW(in3_min, in_min, 3); |
| static SENSOR_DEVICE_ATTR_RW(in3_max, in_max, 3); |
| static SENSOR_DEVICE_ATTR_RO(in4_input, in, 4); |
| static SENSOR_DEVICE_ATTR_RW(in4_min, in_min, 4); |
| static SENSOR_DEVICE_ATTR_RW(in4_max, in_max, 4); |
| |
| /* Temperature */ |
| static ssize_t temp1_input_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct sis5595_data *data = sis5595_update_device(dev); |
| return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp)); |
| } |
| |
| static ssize_t temp1_max_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct sis5595_data *data = sis5595_update_device(dev); |
| return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over)); |
| } |
| |
| static ssize_t temp1_max_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, |
| size_t count) |
| { |
| struct sis5595_data *data = dev_get_drvdata(dev); |
| long val; |
| int err; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err) |
| return err; |
| |
| mutex_lock(&data->update_lock); |
| data->temp_over = TEMP_TO_REG(val); |
| sis5595_write_value(data, SIS5595_REG_TEMP_OVER, data->temp_over); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| |
| static ssize_t temp1_max_hyst_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct sis5595_data *data = sis5595_update_device(dev); |
| return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_hyst)); |
| } |
| |
| static ssize_t temp1_max_hyst_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct sis5595_data *data = dev_get_drvdata(dev); |
| long val; |
| int err; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err) |
| return err; |
| |
| mutex_lock(&data->update_lock); |
| data->temp_hyst = TEMP_TO_REG(val); |
| sis5595_write_value(data, SIS5595_REG_TEMP_HYST, data->temp_hyst); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| |
| static DEVICE_ATTR_RO(temp1_input); |
| static DEVICE_ATTR_RW(temp1_max); |
| static DEVICE_ATTR_RW(temp1_max_hyst); |
| |
| /* 2 Fans */ |
| static ssize_t fan_show(struct device *dev, struct device_attribute *da, |
| char *buf) |
| { |
| struct sis5595_data *data = sis5595_update_device(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| int nr = attr->index; |
| return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr], |
| DIV_FROM_REG(data->fan_div[nr]))); |
| } |
| |
| static ssize_t fan_min_show(struct device *dev, struct device_attribute *da, |
| char *buf) |
| { |
| struct sis5595_data *data = sis5595_update_device(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| int nr = attr->index; |
| return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr], |
| DIV_FROM_REG(data->fan_div[nr]))); |
| } |
| |
| static ssize_t fan_min_store(struct device *dev, struct device_attribute *da, |
| const char *buf, size_t count) |
| { |
| struct sis5595_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| int nr = attr->index; |
| unsigned long val; |
| int err; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err) |
| return err; |
| |
| mutex_lock(&data->update_lock); |
| data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); |
| sis5595_write_value(data, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| |
| static ssize_t fan_div_show(struct device *dev, struct device_attribute *da, |
| char *buf) |
| { |
| struct sis5595_data *data = sis5595_update_device(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| int nr = attr->index; |
| return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr])); |
| } |
| |
| /* |
| * Note: we save and restore the fan minimum here, because its value is |
| * determined in part by the fan divisor. This follows the principle of |
| * least surprise; the user doesn't expect the fan minimum to change just |
| * because the divisor changed. |
| */ |
| static ssize_t fan_div_store(struct device *dev, struct device_attribute *da, |
| const char *buf, size_t count) |
| { |
| struct sis5595_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| int nr = attr->index; |
| unsigned long min; |
| int reg; |
| unsigned long val; |
| int err; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err) |
| return err; |
| |
| mutex_lock(&data->update_lock); |
| min = FAN_FROM_REG(data->fan_min[nr], |
| DIV_FROM_REG(data->fan_div[nr])); |
| reg = sis5595_read_value(data, SIS5595_REG_FANDIV); |
| |
| switch (val) { |
| case 1: |
| data->fan_div[nr] = 0; |
| break; |
| case 2: |
| data->fan_div[nr] = 1; |
| break; |
| case 4: |
| data->fan_div[nr] = 2; |
| break; |
| case 8: |
| data->fan_div[nr] = 3; |
| break; |
| default: |
| dev_err(dev, |
| "fan_div value %ld not supported. Choose one of 1, 2, 4 or 8!\n", |
| val); |
| mutex_unlock(&data->update_lock); |
| return -EINVAL; |
| } |
| |
| switch (nr) { |
| case 0: |
| reg = (reg & 0xcf) | (data->fan_div[nr] << 4); |
| break; |
| case 1: |
| reg = (reg & 0x3f) | (data->fan_div[nr] << 6); |
| break; |
| } |
| sis5595_write_value(data, SIS5595_REG_FANDIV, reg); |
| data->fan_min[nr] = |
| FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); |
| sis5595_write_value(data, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| |
| static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0); |
| static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0); |
| static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0); |
| static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1); |
| static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1); |
| static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1); |
| |
| /* Alarms */ |
| static ssize_t alarms_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct sis5595_data *data = sis5595_update_device(dev); |
| return sprintf(buf, "%d\n", data->alarms); |
| } |
| static DEVICE_ATTR_RO(alarms); |
| |
| static ssize_t alarm_show(struct device *dev, struct device_attribute *da, |
| char *buf) |
| { |
| struct sis5595_data *data = sis5595_update_device(dev); |
| int nr = to_sensor_dev_attr(da)->index; |
| return sprintf(buf, "%u\n", (data->alarms >> nr) & 1); |
| } |
| static SENSOR_DEVICE_ATTR_RO(in0_alarm, alarm, 0); |
| static SENSOR_DEVICE_ATTR_RO(in1_alarm, alarm, 1); |
| static SENSOR_DEVICE_ATTR_RO(in2_alarm, alarm, 2); |
| static SENSOR_DEVICE_ATTR_RO(in3_alarm, alarm, 3); |
| static SENSOR_DEVICE_ATTR_RO(in4_alarm, alarm, 15); |
| static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, 6); |
| static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, 7); |
| static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 15); |
| |
| static ssize_t name_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct sis5595_data *data = dev_get_drvdata(dev); |
| return sprintf(buf, "%s\n", data->name); |
| } |
| static DEVICE_ATTR_RO(name); |
| |
| static struct attribute *sis5595_attributes[] = { |
| &sensor_dev_attr_in0_input.dev_attr.attr, |
| &sensor_dev_attr_in0_min.dev_attr.attr, |
| &sensor_dev_attr_in0_max.dev_attr.attr, |
| &sensor_dev_attr_in0_alarm.dev_attr.attr, |
| &sensor_dev_attr_in1_input.dev_attr.attr, |
| &sensor_dev_attr_in1_min.dev_attr.attr, |
| &sensor_dev_attr_in1_max.dev_attr.attr, |
| &sensor_dev_attr_in1_alarm.dev_attr.attr, |
| &sensor_dev_attr_in2_input.dev_attr.attr, |
| &sensor_dev_attr_in2_min.dev_attr.attr, |
| &sensor_dev_attr_in2_max.dev_attr.attr, |
| &sensor_dev_attr_in2_alarm.dev_attr.attr, |
| &sensor_dev_attr_in3_input.dev_attr.attr, |
| &sensor_dev_attr_in3_min.dev_attr.attr, |
| &sensor_dev_attr_in3_max.dev_attr.attr, |
| &sensor_dev_attr_in3_alarm.dev_attr.attr, |
| |
| &sensor_dev_attr_fan1_input.dev_attr.attr, |
| &sensor_dev_attr_fan1_min.dev_attr.attr, |
| &sensor_dev_attr_fan1_div.dev_attr.attr, |
| &sensor_dev_attr_fan1_alarm.dev_attr.attr, |
| &sensor_dev_attr_fan2_input.dev_attr.attr, |
| &sensor_dev_attr_fan2_min.dev_attr.attr, |
| &sensor_dev_attr_fan2_div.dev_attr.attr, |
| &sensor_dev_attr_fan2_alarm.dev_attr.attr, |
| |
| &dev_attr_alarms.attr, |
| &dev_attr_name.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group sis5595_group = { |
| .attrs = sis5595_attributes, |
| }; |
| |
| static struct attribute *sis5595_attributes_in4[] = { |
| &sensor_dev_attr_in4_input.dev_attr.attr, |
| &sensor_dev_attr_in4_min.dev_attr.attr, |
| &sensor_dev_attr_in4_max.dev_attr.attr, |
| &sensor_dev_attr_in4_alarm.dev_attr.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group sis5595_group_in4 = { |
| .attrs = sis5595_attributes_in4, |
| }; |
| |
| static struct attribute *sis5595_attributes_temp1[] = { |
| &dev_attr_temp1_input.attr, |
| &dev_attr_temp1_max.attr, |
| &dev_attr_temp1_max_hyst.attr, |
| &sensor_dev_attr_temp1_alarm.dev_attr.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group sis5595_group_temp1 = { |
| .attrs = sis5595_attributes_temp1, |
| }; |
| |
| /* This is called when the module is loaded */ |
| static int sis5595_probe(struct platform_device *pdev) |
| { |
| int err = 0; |
| int i; |
| struct sis5595_data *data; |
| struct resource *res; |
| char val; |
| |
| /* Reserve the ISA region */ |
| res = platform_get_resource(pdev, IORESOURCE_IO, 0); |
| if (!devm_request_region(&pdev->dev, res->start, SIS5595_EXTENT, |
| sis5595_driver.driver.name)) |
| return -EBUSY; |
| |
| data = devm_kzalloc(&pdev->dev, sizeof(struct sis5595_data), |
| GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| mutex_init(&data->lock); |
| mutex_init(&data->update_lock); |
| data->addr = res->start; |
| data->name = "sis5595"; |
| platform_set_drvdata(pdev, data); |
| |
| /* |
| * Check revision and pin registers to determine whether 4 or 5 voltages |
| */ |
| data->revision = s_bridge->revision; |
| /* 4 voltages, 1 temp */ |
| data->maxins = 3; |
| if (data->revision >= REV2MIN) { |
| pci_read_config_byte(s_bridge, SIS5595_PIN_REG, &val); |
| if (!(val & 0x80)) |
| /* 5 voltages, no temps */ |
| data->maxins = 4; |
| } |
| |
| /* Initialize the SIS5595 chip */ |
| sis5595_init_device(data); |
| |
| /* A few vars need to be filled upon startup */ |
| for (i = 0; i < 2; i++) { |
| data->fan_min[i] = sis5595_read_value(data, |
| SIS5595_REG_FAN_MIN(i)); |
| } |
| |
| /* Register sysfs hooks */ |
| err = sysfs_create_group(&pdev->dev.kobj, &sis5595_group); |
| if (err) |
| return err; |
| if (data->maxins == 4) { |
| err = sysfs_create_group(&pdev->dev.kobj, &sis5595_group_in4); |
| if (err) |
| goto exit_remove_files; |
| } else { |
| err = sysfs_create_group(&pdev->dev.kobj, &sis5595_group_temp1); |
| if (err) |
| goto exit_remove_files; |
| } |
| |
| data->hwmon_dev = hwmon_device_register(&pdev->dev); |
| if (IS_ERR(data->hwmon_dev)) { |
| err = PTR_ERR(data->hwmon_dev); |
| goto exit_remove_files; |
| } |
| |
| return 0; |
| |
| exit_remove_files: |
| sysfs_remove_group(&pdev->dev.kobj, &sis5595_group); |
| sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_in4); |
| sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_temp1); |
| return err; |
| } |
| |
| static int sis5595_remove(struct platform_device *pdev) |
| { |
| struct sis5595_data *data = platform_get_drvdata(pdev); |
| |
| hwmon_device_unregister(data->hwmon_dev); |
| sysfs_remove_group(&pdev->dev.kobj, &sis5595_group); |
| sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_in4); |
| sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_temp1); |
| |
| return 0; |
| } |
| |
| /* ISA access must be locked explicitly. */ |
| static int sis5595_read_value(struct sis5595_data *data, u8 reg) |
| { |
| int res; |
| |
| mutex_lock(&data->lock); |
| outb_p(reg, data->addr + SIS5595_ADDR_REG_OFFSET); |
| res = inb_p(data->addr + SIS5595_DATA_REG_OFFSET); |
| mutex_unlock(&data->lock); |
| return res; |
| } |
| |
| static void sis5595_write_value(struct sis5595_data *data, u8 reg, u8 value) |
| { |
| mutex_lock(&data->lock); |
| outb_p(reg, data->addr + SIS5595_ADDR_REG_OFFSET); |
| outb_p(value, data->addr + SIS5595_DATA_REG_OFFSET); |
| mutex_unlock(&data->lock); |
| } |
| |
| /* Called when we have found a new SIS5595. */ |
| static void sis5595_init_device(struct sis5595_data *data) |
| { |
| u8 config = sis5595_read_value(data, SIS5595_REG_CONFIG); |
| if (!(config & 0x01)) |
| sis5595_write_value(data, SIS5595_REG_CONFIG, |
| (config & 0xf7) | 0x01); |
| } |
| |
| static struct sis5595_data *sis5595_update_device(struct device *dev) |
| { |
| struct sis5595_data *data = dev_get_drvdata(dev); |
| int i; |
| |
| mutex_lock(&data->update_lock); |
| |
| if (time_after(jiffies, data->last_updated + HZ + HZ / 2) |
| || !data->valid) { |
| |
| for (i = 0; i <= data->maxins; i++) { |
| data->in[i] = |
| sis5595_read_value(data, SIS5595_REG_IN(i)); |
| data->in_min[i] = |
| sis5595_read_value(data, |
| SIS5595_REG_IN_MIN(i)); |
| data->in_max[i] = |
| sis5595_read_value(data, |
| SIS5595_REG_IN_MAX(i)); |
| } |
| for (i = 0; i < 2; i++) { |
| data->fan[i] = |
| sis5595_read_value(data, SIS5595_REG_FAN(i)); |
| data->fan_min[i] = |
| sis5595_read_value(data, |
| SIS5595_REG_FAN_MIN(i)); |
| } |
| if (data->maxins == 3) { |
| data->temp = |
| sis5595_read_value(data, SIS5595_REG_TEMP); |
| data->temp_over = |
| sis5595_read_value(data, SIS5595_REG_TEMP_OVER); |
| data->temp_hyst = |
| sis5595_read_value(data, SIS5595_REG_TEMP_HYST); |
| } |
| i = sis5595_read_value(data, SIS5595_REG_FANDIV); |
| data->fan_div[0] = (i >> 4) & 0x03; |
| data->fan_div[1] = i >> 6; |
| data->alarms = |
| sis5595_read_value(data, SIS5595_REG_ALARM1) | |
| (sis5595_read_value(data, SIS5595_REG_ALARM2) << 8); |
| data->last_updated = jiffies; |
| data->valid = 1; |
| } |
| |
| mutex_unlock(&data->update_lock); |
| |
| return data; |
| } |
| |
| static const struct pci_device_id sis5595_pci_ids[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) }, |
| { 0, } |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, sis5595_pci_ids); |
| |
| static int blacklist[] = { |
| PCI_DEVICE_ID_SI_540, |
| PCI_DEVICE_ID_SI_550, |
| PCI_DEVICE_ID_SI_630, |
| PCI_DEVICE_ID_SI_645, |
| PCI_DEVICE_ID_SI_730, |
| PCI_DEVICE_ID_SI_735, |
| PCI_DEVICE_ID_SI_5511, /* |
| * 5513 chip has the 0008 device but |
| * that ID shows up in other chips so we |
| * use the 5511 ID for recognition |
| */ |
| PCI_DEVICE_ID_SI_5597, |
| PCI_DEVICE_ID_SI_5598, |
| 0 }; |
| |
| static int sis5595_device_add(unsigned short address) |
| { |
| struct resource res = { |
| .start = address, |
| .end = address + SIS5595_EXTENT - 1, |
| .name = "sis5595", |
| .flags = IORESOURCE_IO, |
| }; |
| int err; |
| |
| err = acpi_check_resource_conflict(&res); |
| if (err) |
| goto exit; |
| |
| pdev = platform_device_alloc("sis5595", address); |
| if (!pdev) { |
| err = -ENOMEM; |
| pr_err("Device allocation failed\n"); |
| goto exit; |
| } |
| |
| err = platform_device_add_resources(pdev, &res, 1); |
| if (err) { |
| pr_err("Device resource addition failed (%d)\n", err); |
| goto exit_device_put; |
| } |
| |
| err = platform_device_add(pdev); |
| if (err) { |
| pr_err("Device addition failed (%d)\n", err); |
| goto exit_device_put; |
| } |
| |
| return 0; |
| |
| exit_device_put: |
| platform_device_put(pdev); |
| exit: |
| return err; |
| } |
| |
| static int sis5595_pci_probe(struct pci_dev *dev, |
| const struct pci_device_id *id) |
| { |
| u16 address; |
| u8 enable; |
| int *i; |
| |
| for (i = blacklist; *i != 0; i++) { |
| struct pci_dev *d; |
| d = pci_get_device(PCI_VENDOR_ID_SI, *i, NULL); |
| if (d) { |
| dev_err(&d->dev, |
| "Looked for SIS5595 but found unsupported device %.4x\n", |
| *i); |
| pci_dev_put(d); |
| return -ENODEV; |
| } |
| } |
| |
| force_addr &= ~(SIS5595_EXTENT - 1); |
| if (force_addr) { |
| dev_warn(&dev->dev, "Forcing ISA address 0x%x\n", force_addr); |
| pci_write_config_word(dev, SIS5595_BASE_REG, force_addr); |
| } |
| |
| if (PCIBIOS_SUCCESSFUL != |
| pci_read_config_word(dev, SIS5595_BASE_REG, &address)) { |
| dev_err(&dev->dev, "Failed to read ISA address\n"); |
| return -ENODEV; |
| } |
| |
| address &= ~(SIS5595_EXTENT - 1); |
| if (!address) { |
| dev_err(&dev->dev, |
| "Base address not set - upgrade BIOS or use force_addr=0xaddr\n"); |
| return -ENODEV; |
| } |
| if (force_addr && address != force_addr) { |
| /* doesn't work for some chips? */ |
| dev_err(&dev->dev, "Failed to force ISA address\n"); |
| return -ENODEV; |
| } |
| |
| if (PCIBIOS_SUCCESSFUL != |
| pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable)) { |
| dev_err(&dev->dev, "Failed to read enable register\n"); |
| return -ENODEV; |
| } |
| if (!(enable & 0x80)) { |
| if ((PCIBIOS_SUCCESSFUL != |
| pci_write_config_byte(dev, SIS5595_ENABLE_REG, |
| enable | 0x80)) |
| || (PCIBIOS_SUCCESSFUL != |
| pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable)) |
| || (!(enable & 0x80))) { |
| /* doesn't work for some chips! */ |
| dev_err(&dev->dev, "Failed to enable HWM device\n"); |
| return -ENODEV; |
| } |
| } |
| |
| if (platform_driver_register(&sis5595_driver)) { |
| dev_dbg(&dev->dev, "Failed to register sis5595 driver\n"); |
| goto exit; |
| } |
| |
| s_bridge = pci_dev_get(dev); |
| /* Sets global pdev as a side effect */ |
| if (sis5595_device_add(address)) |
| goto exit_unregister; |
| |
| /* |
| * Always return failure here. This is to allow other drivers to bind |
| * to this pci device. We don't really want to have control over the |
| * pci device, we only wanted to read as few register values from it. |
| */ |
| return -ENODEV; |
| |
| exit_unregister: |
| pci_dev_put(dev); |
| platform_driver_unregister(&sis5595_driver); |
| exit: |
| return -ENODEV; |
| } |
| |
| static struct pci_driver sis5595_pci_driver = { |
| .name = "sis5595", |
| .id_table = sis5595_pci_ids, |
| .probe = sis5595_pci_probe, |
| }; |
| |
| static int __init sm_sis5595_init(void) |
| { |
| return pci_register_driver(&sis5595_pci_driver); |
| } |
| |
| static void __exit sm_sis5595_exit(void) |
| { |
| pci_unregister_driver(&sis5595_pci_driver); |
| if (s_bridge != NULL) { |
| platform_device_unregister(pdev); |
| platform_driver_unregister(&sis5595_driver); |
| pci_dev_put(s_bridge); |
| s_bridge = NULL; |
| } |
| } |
| |
| MODULE_AUTHOR("Aurelien Jarno <aurelien@aurel32.net>"); |
| MODULE_DESCRIPTION("SiS 5595 Sensor device"); |
| MODULE_LICENSE("GPL"); |
| |
| module_init(sm_sis5595_init); |
| module_exit(sm_sis5595_exit); |