| // SPDX-License-Identifier: GPL-2.0+ |
| // |
| // Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved. |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/err.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/regulator/of_regulator.h> |
| #include <linux/platform_device.h> |
| #include <linux/reboot.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/pfuze100.h> |
| #include <linux/i2c.h> |
| #include <linux/slab.h> |
| #include <linux/regmap.h> |
| |
| #define PFUZE_FLAG_DISABLE_SW BIT(1) |
| |
| #define PFUZE_NUMREGS 128 |
| #define PFUZE100_VOL_OFFSET 0 |
| #define PFUZE100_STANDBY_OFFSET 1 |
| #define PFUZE100_MODE_OFFSET 3 |
| #define PFUZE100_CONF_OFFSET 4 |
| |
| #define PFUZE100_DEVICEID 0x0 |
| #define PFUZE100_REVID 0x3 |
| #define PFUZE100_FABID 0x4 |
| |
| #define PFUZE100_COINVOL 0x1a |
| #define PFUZE100_SW1ABVOL 0x20 |
| #define PFUZE100_SW1ABMODE 0x23 |
| #define PFUZE100_SW1CVOL 0x2e |
| #define PFUZE100_SW1CMODE 0x31 |
| #define PFUZE100_SW2VOL 0x35 |
| #define PFUZE100_SW2MODE 0x38 |
| #define PFUZE100_SW3AVOL 0x3c |
| #define PFUZE100_SW3AMODE 0x3f |
| #define PFUZE100_SW3BVOL 0x43 |
| #define PFUZE100_SW3BMODE 0x46 |
| #define PFUZE100_SW4VOL 0x4a |
| #define PFUZE100_SW4MODE 0x4d |
| #define PFUZE100_SWBSTCON1 0x66 |
| #define PFUZE100_VREFDDRCON 0x6a |
| #define PFUZE100_VSNVSVOL 0x6b |
| #define PFUZE100_VGEN1VOL 0x6c |
| #define PFUZE100_VGEN2VOL 0x6d |
| #define PFUZE100_VGEN3VOL 0x6e |
| #define PFUZE100_VGEN4VOL 0x6f |
| #define PFUZE100_VGEN5VOL 0x70 |
| #define PFUZE100_VGEN6VOL 0x71 |
| |
| #define PFUZE100_SWxMODE_MASK 0xf |
| #define PFUZE100_SWxMODE_APS_APS 0x8 |
| #define PFUZE100_SWxMODE_APS_OFF 0x4 |
| |
| #define PFUZE100_VGENxLPWR BIT(6) |
| #define PFUZE100_VGENxSTBY BIT(5) |
| |
| enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3, PFUZE3001 = 0x31, }; |
| |
| struct pfuze_regulator { |
| struct regulator_desc desc; |
| unsigned char stby_reg; |
| unsigned char stby_mask; |
| bool sw_reg; |
| }; |
| |
| struct pfuze_chip { |
| int chip_id; |
| int flags; |
| struct regmap *regmap; |
| struct device *dev; |
| struct pfuze_regulator regulator_descs[PFUZE100_MAX_REGULATOR]; |
| struct regulator_dev *regulators[PFUZE100_MAX_REGULATOR]; |
| struct pfuze_regulator *pfuze_regulators; |
| }; |
| |
| static const int pfuze100_swbst[] = { |
| 5000000, 5050000, 5100000, 5150000, |
| }; |
| |
| static const int pfuze100_vsnvs[] = { |
| 1000000, 1100000, 1200000, 1300000, 1500000, 1800000, 3000000, |
| }; |
| |
| static const int pfuze100_coin[] = { |
| 2500000, 2700000, 2800000, 2900000, 3000000, 3100000, 3200000, 3300000, |
| }; |
| |
| static const int pfuze3000_sw1a[] = { |
| 700000, 725000, 750000, 775000, 800000, 825000, 850000, 875000, |
| 900000, 925000, 950000, 975000, 1000000, 1025000, 1050000, 1075000, |
| 1100000, 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, |
| 1300000, 1325000, 1350000, 1375000, 1400000, 1425000, 1800000, 3300000, |
| }; |
| |
| static const int pfuze3000_sw2lo[] = { |
| 1500000, 1550000, 1600000, 1650000, 1700000, 1750000, 1800000, 1850000, |
| }; |
| |
| static const int pfuze3000_sw2hi[] = { |
| 2500000, 2800000, 2850000, 3000000, 3100000, 3150000, 3200000, 3300000, |
| }; |
| |
| static const struct of_device_id pfuze_dt_ids[] = { |
| { .compatible = "fsl,pfuze100", .data = (void *)PFUZE100}, |
| { .compatible = "fsl,pfuze200", .data = (void *)PFUZE200}, |
| { .compatible = "fsl,pfuze3000", .data = (void *)PFUZE3000}, |
| { .compatible = "fsl,pfuze3001", .data = (void *)PFUZE3001}, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, pfuze_dt_ids); |
| |
| static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) |
| { |
| struct pfuze_chip *pfuze100 = rdev_get_drvdata(rdev); |
| int id = rdev_get_id(rdev); |
| bool reg_has_ramp_delay; |
| unsigned int ramp_bits = 0; |
| int ret; |
| |
| switch (pfuze100->chip_id) { |
| case PFUZE3001: |
| /* no dynamic voltage scaling for PF3001 */ |
| reg_has_ramp_delay = false; |
| break; |
| case PFUZE3000: |
| reg_has_ramp_delay = (id < PFUZE3000_SWBST); |
| break; |
| case PFUZE200: |
| reg_has_ramp_delay = (id < PFUZE200_SWBST); |
| break; |
| case PFUZE100: |
| default: |
| reg_has_ramp_delay = (id < PFUZE100_SWBST); |
| break; |
| } |
| |
| if (reg_has_ramp_delay) { |
| if (ramp_delay > 0) { |
| ramp_delay = 12500 / ramp_delay; |
| ramp_bits = (ramp_delay >> 1) - (ramp_delay >> 3); |
| } |
| |
| ret = regmap_update_bits(pfuze100->regmap, |
| rdev->desc->vsel_reg + 4, |
| 0xc0, ramp_bits << 6); |
| if (ret < 0) |
| dev_err(pfuze100->dev, "ramp failed, err %d\n", ret); |
| } else { |
| ret = -EACCES; |
| } |
| |
| return ret; |
| } |
| |
| static const struct regulator_ops pfuze100_ldo_regulator_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .list_voltage = regulator_list_voltage_linear, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| }; |
| |
| static const struct regulator_ops pfuze100_fixed_regulator_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .list_voltage = regulator_list_voltage_linear, |
| }; |
| |
| static const struct regulator_ops pfuze100_sw_regulator_ops = { |
| .list_voltage = regulator_list_voltage_linear, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_time_sel = regulator_set_voltage_time_sel, |
| .set_ramp_delay = pfuze100_set_ramp_delay, |
| }; |
| |
| static const struct regulator_ops pfuze100_sw_disable_regulator_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .list_voltage = regulator_list_voltage_linear, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_time_sel = regulator_set_voltage_time_sel, |
| .set_ramp_delay = pfuze100_set_ramp_delay, |
| }; |
| |
| static const struct regulator_ops pfuze100_swb_regulator_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .list_voltage = regulator_list_voltage_table, |
| .map_voltage = regulator_map_voltage_ascend, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| |
| }; |
| |
| static const struct regulator_ops pfuze3000_sw_regulator_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .list_voltage = regulator_list_voltage_table, |
| .map_voltage = regulator_map_voltage_ascend, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_time_sel = regulator_set_voltage_time_sel, |
| .set_ramp_delay = pfuze100_set_ramp_delay, |
| |
| }; |
| |
| #define PFUZE100_FIXED_REG(_chip, _name, base, voltage) \ |
| [_chip ## _ ## _name] = { \ |
| .desc = { \ |
| .name = #_name, \ |
| .n_voltages = 1, \ |
| .ops = &pfuze100_fixed_regulator_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = _chip ## _ ## _name, \ |
| .owner = THIS_MODULE, \ |
| .min_uV = (voltage), \ |
| .enable_reg = (base), \ |
| .enable_mask = 0x10, \ |
| }, \ |
| } |
| |
| #define PFUZE100_SW_REG(_chip, _name, base, min, max, step) \ |
| [_chip ## _ ## _name] = { \ |
| .desc = { \ |
| .name = #_name,\ |
| .n_voltages = ((max) - (min)) / (step) + 1, \ |
| .ops = &pfuze100_sw_regulator_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = _chip ## _ ## _name, \ |
| .owner = THIS_MODULE, \ |
| .min_uV = (min), \ |
| .uV_step = (step), \ |
| .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ |
| .vsel_mask = 0x3f, \ |
| .enable_reg = (base) + PFUZE100_MODE_OFFSET, \ |
| .enable_mask = 0xf, \ |
| }, \ |
| .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \ |
| .stby_mask = 0x3f, \ |
| .sw_reg = true, \ |
| } |
| |
| #define PFUZE100_SWB_REG(_chip, _name, base, mask, voltages) \ |
| [_chip ## _ ## _name] = { \ |
| .desc = { \ |
| .name = #_name, \ |
| .n_voltages = ARRAY_SIZE(voltages), \ |
| .ops = &pfuze100_swb_regulator_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = _chip ## _ ## _name, \ |
| .owner = THIS_MODULE, \ |
| .volt_table = voltages, \ |
| .vsel_reg = (base), \ |
| .vsel_mask = (mask), \ |
| .enable_reg = (base), \ |
| .enable_mask = 0x48, \ |
| }, \ |
| } |
| |
| #define PFUZE100_VGEN_REG(_chip, _name, base, min, max, step) \ |
| [_chip ## _ ## _name] = { \ |
| .desc = { \ |
| .name = #_name, \ |
| .n_voltages = ((max) - (min)) / (step) + 1, \ |
| .ops = &pfuze100_ldo_regulator_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = _chip ## _ ## _name, \ |
| .owner = THIS_MODULE, \ |
| .min_uV = (min), \ |
| .uV_step = (step), \ |
| .vsel_reg = (base), \ |
| .vsel_mask = 0xf, \ |
| .enable_reg = (base), \ |
| .enable_mask = 0x10, \ |
| }, \ |
| .stby_reg = (base), \ |
| .stby_mask = 0x20, \ |
| } |
| |
| #define PFUZE100_COIN_REG(_chip, _name, base, mask, voltages) \ |
| [_chip ## _ ## _name] = { \ |
| .desc = { \ |
| .name = #_name, \ |
| .n_voltages = ARRAY_SIZE(voltages), \ |
| .ops = &pfuze100_swb_regulator_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = _chip ## _ ## _name, \ |
| .owner = THIS_MODULE, \ |
| .volt_table = voltages, \ |
| .vsel_reg = (base), \ |
| .vsel_mask = (mask), \ |
| .enable_reg = (base), \ |
| .enable_mask = 0x8, \ |
| }, \ |
| } |
| |
| #define PFUZE3000_VCC_REG(_chip, _name, base, min, max, step) { \ |
| .desc = { \ |
| .name = #_name, \ |
| .n_voltages = ((max) - (min)) / (step) + 1, \ |
| .ops = &pfuze100_ldo_regulator_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = _chip ## _ ## _name, \ |
| .owner = THIS_MODULE, \ |
| .min_uV = (min), \ |
| .uV_step = (step), \ |
| .vsel_reg = (base), \ |
| .vsel_mask = 0x3, \ |
| .enable_reg = (base), \ |
| .enable_mask = 0x10, \ |
| }, \ |
| .stby_reg = (base), \ |
| .stby_mask = 0x20, \ |
| } |
| |
| /* No linar case for the some switches of PFUZE3000 */ |
| #define PFUZE3000_SW_REG(_chip, _name, base, mask, voltages) \ |
| [_chip ## _ ## _name] = { \ |
| .desc = { \ |
| .name = #_name, \ |
| .n_voltages = ARRAY_SIZE(voltages), \ |
| .ops = &pfuze3000_sw_regulator_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = _chip ## _ ## _name, \ |
| .owner = THIS_MODULE, \ |
| .volt_table = voltages, \ |
| .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ |
| .vsel_mask = (mask), \ |
| .enable_reg = (base) + PFUZE100_MODE_OFFSET, \ |
| .enable_mask = 0xf, \ |
| .enable_val = 0x8, \ |
| .enable_time = 500, \ |
| }, \ |
| .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \ |
| .stby_mask = (mask), \ |
| .sw_reg = true, \ |
| } |
| |
| #define PFUZE3000_SW3_REG(_chip, _name, base, min, max, step) { \ |
| .desc = { \ |
| .name = #_name,\ |
| .n_voltages = ((max) - (min)) / (step) + 1, \ |
| .ops = &pfuze100_sw_regulator_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = _chip ## _ ## _name, \ |
| .owner = THIS_MODULE, \ |
| .min_uV = (min), \ |
| .uV_step = (step), \ |
| .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ |
| .vsel_mask = 0xf, \ |
| }, \ |
| .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \ |
| .stby_mask = 0xf, \ |
| } |
| |
| /* PFUZE100 */ |
| static struct pfuze_regulator pfuze100_regulators[] = { |
| PFUZE100_SW_REG(PFUZE100, SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000), |
| PFUZE100_SW_REG(PFUZE100, SW1C, PFUZE100_SW1CVOL, 300000, 1875000, 25000), |
| PFUZE100_SW_REG(PFUZE100, SW2, PFUZE100_SW2VOL, 400000, 1975000, 25000), |
| PFUZE100_SW_REG(PFUZE100, SW3A, PFUZE100_SW3AVOL, 400000, 1975000, 25000), |
| PFUZE100_SW_REG(PFUZE100, SW3B, PFUZE100_SW3BVOL, 400000, 1975000, 25000), |
| PFUZE100_SW_REG(PFUZE100, SW4, PFUZE100_SW4VOL, 400000, 1975000, 25000), |
| PFUZE100_SWB_REG(PFUZE100, SWBST, PFUZE100_SWBSTCON1, 0x3 , pfuze100_swbst), |
| PFUZE100_SWB_REG(PFUZE100, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), |
| PFUZE100_FIXED_REG(PFUZE100, VREFDDR, PFUZE100_VREFDDRCON, 750000), |
| PFUZE100_VGEN_REG(PFUZE100, VGEN1, PFUZE100_VGEN1VOL, 800000, 1550000, 50000), |
| PFUZE100_VGEN_REG(PFUZE100, VGEN2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000), |
| PFUZE100_VGEN_REG(PFUZE100, VGEN3, PFUZE100_VGEN3VOL, 1800000, 3300000, 100000), |
| PFUZE100_VGEN_REG(PFUZE100, VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000), |
| PFUZE100_VGEN_REG(PFUZE100, VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000), |
| PFUZE100_VGEN_REG(PFUZE100, VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000), |
| PFUZE100_COIN_REG(PFUZE100, COIN, PFUZE100_COINVOL, 0x7, pfuze100_coin), |
| }; |
| |
| static struct pfuze_regulator pfuze200_regulators[] = { |
| PFUZE100_SW_REG(PFUZE200, SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000), |
| PFUZE100_SW_REG(PFUZE200, SW2, PFUZE100_SW2VOL, 400000, 1975000, 25000), |
| PFUZE100_SW_REG(PFUZE200, SW3A, PFUZE100_SW3AVOL, 400000, 1975000, 25000), |
| PFUZE100_SW_REG(PFUZE200, SW3B, PFUZE100_SW3BVOL, 400000, 1975000, 25000), |
| PFUZE100_SWB_REG(PFUZE200, SWBST, PFUZE100_SWBSTCON1, 0x3 , pfuze100_swbst), |
| PFUZE100_SWB_REG(PFUZE200, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), |
| PFUZE100_FIXED_REG(PFUZE200, VREFDDR, PFUZE100_VREFDDRCON, 750000), |
| PFUZE100_VGEN_REG(PFUZE200, VGEN1, PFUZE100_VGEN1VOL, 800000, 1550000, 50000), |
| PFUZE100_VGEN_REG(PFUZE200, VGEN2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000), |
| PFUZE100_VGEN_REG(PFUZE200, VGEN3, PFUZE100_VGEN3VOL, 1800000, 3300000, 100000), |
| PFUZE100_VGEN_REG(PFUZE200, VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000), |
| PFUZE100_VGEN_REG(PFUZE200, VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000), |
| PFUZE100_VGEN_REG(PFUZE200, VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000), |
| PFUZE100_COIN_REG(PFUZE200, COIN, PFUZE100_COINVOL, 0x7, pfuze100_coin), |
| }; |
| |
| static struct pfuze_regulator pfuze3000_regulators[] = { |
| PFUZE3000_SW_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a), |
| PFUZE100_SW_REG(PFUZE3000, SW1B, PFUZE100_SW1CVOL, 700000, 1475000, 25000), |
| PFUZE3000_SW_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), |
| PFUZE3000_SW3_REG(PFUZE3000, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000), |
| PFUZE100_SWB_REG(PFUZE3000, SWBST, PFUZE100_SWBSTCON1, 0x3, pfuze100_swbst), |
| PFUZE100_SWB_REG(PFUZE3000, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), |
| PFUZE100_FIXED_REG(PFUZE3000, VREFDDR, PFUZE100_VREFDDRCON, 750000), |
| PFUZE100_VGEN_REG(PFUZE3000, VLDO1, PFUZE100_VGEN1VOL, 1800000, 3300000, 100000), |
| PFUZE100_VGEN_REG(PFUZE3000, VLDO2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000), |
| PFUZE3000_VCC_REG(PFUZE3000, VCCSD, PFUZE100_VGEN3VOL, 2850000, 3300000, 150000), |
| PFUZE3000_VCC_REG(PFUZE3000, V33, PFUZE100_VGEN4VOL, 2850000, 3300000, 150000), |
| PFUZE100_VGEN_REG(PFUZE3000, VLDO3, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000), |
| PFUZE100_VGEN_REG(PFUZE3000, VLDO4, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000), |
| }; |
| |
| static struct pfuze_regulator pfuze3001_regulators[] = { |
| PFUZE3000_SW_REG(PFUZE3001, SW1, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a), |
| PFUZE3000_SW_REG(PFUZE3001, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), |
| PFUZE3000_SW3_REG(PFUZE3001, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000), |
| PFUZE100_SWB_REG(PFUZE3001, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), |
| PFUZE100_VGEN_REG(PFUZE3001, VLDO1, PFUZE100_VGEN1VOL, 1800000, 3300000, 100000), |
| PFUZE100_VGEN_REG(PFUZE3001, VLDO2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000), |
| PFUZE3000_VCC_REG(PFUZE3001, VCCSD, PFUZE100_VGEN3VOL, 2850000, 3300000, 150000), |
| PFUZE3000_VCC_REG(PFUZE3001, V33, PFUZE100_VGEN4VOL, 2850000, 3300000, 150000), |
| PFUZE100_VGEN_REG(PFUZE3001, VLDO3, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000), |
| PFUZE100_VGEN_REG(PFUZE3001, VLDO4, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000), |
| }; |
| |
| /* PFUZE100 */ |
| static struct of_regulator_match pfuze100_matches[] = { |
| { .name = "sw1ab", }, |
| { .name = "sw1c", }, |
| { .name = "sw2", }, |
| { .name = "sw3a", }, |
| { .name = "sw3b", }, |
| { .name = "sw4", }, |
| { .name = "swbst", }, |
| { .name = "vsnvs", }, |
| { .name = "vrefddr", }, |
| { .name = "vgen1", }, |
| { .name = "vgen2", }, |
| { .name = "vgen3", }, |
| { .name = "vgen4", }, |
| { .name = "vgen5", }, |
| { .name = "vgen6", }, |
| { .name = "coin", }, |
| }; |
| |
| /* PFUZE200 */ |
| static struct of_regulator_match pfuze200_matches[] = { |
| |
| { .name = "sw1ab", }, |
| { .name = "sw2", }, |
| { .name = "sw3a", }, |
| { .name = "sw3b", }, |
| { .name = "swbst", }, |
| { .name = "vsnvs", }, |
| { .name = "vrefddr", }, |
| { .name = "vgen1", }, |
| { .name = "vgen2", }, |
| { .name = "vgen3", }, |
| { .name = "vgen4", }, |
| { .name = "vgen5", }, |
| { .name = "vgen6", }, |
| { .name = "coin", }, |
| }; |
| |
| /* PFUZE3000 */ |
| static struct of_regulator_match pfuze3000_matches[] = { |
| |
| { .name = "sw1a", }, |
| { .name = "sw1b", }, |
| { .name = "sw2", }, |
| { .name = "sw3", }, |
| { .name = "swbst", }, |
| { .name = "vsnvs", }, |
| { .name = "vrefddr", }, |
| { .name = "vldo1", }, |
| { .name = "vldo2", }, |
| { .name = "vccsd", }, |
| { .name = "v33", }, |
| { .name = "vldo3", }, |
| { .name = "vldo4", }, |
| }; |
| |
| /* PFUZE3001 */ |
| static struct of_regulator_match pfuze3001_matches[] = { |
| |
| { .name = "sw1", }, |
| { .name = "sw2", }, |
| { .name = "sw3", }, |
| { .name = "vsnvs", }, |
| { .name = "vldo1", }, |
| { .name = "vldo2", }, |
| { .name = "vccsd", }, |
| { .name = "v33", }, |
| { .name = "vldo3", }, |
| { .name = "vldo4", }, |
| }; |
| |
| static struct of_regulator_match *pfuze_matches; |
| |
| static int pfuze_parse_regulators_dt(struct pfuze_chip *chip) |
| { |
| struct device *dev = chip->dev; |
| struct device_node *np, *parent; |
| int ret; |
| |
| np = of_node_get(dev->of_node); |
| if (!np) |
| return -EINVAL; |
| |
| if (of_property_read_bool(np, "fsl,pfuze-support-disable-sw")) |
| chip->flags |= PFUZE_FLAG_DISABLE_SW; |
| |
| parent = of_get_child_by_name(np, "regulators"); |
| if (!parent) { |
| dev_err(dev, "regulators node not found\n"); |
| of_node_put(np); |
| return -EINVAL; |
| } |
| |
| switch (chip->chip_id) { |
| case PFUZE3001: |
| pfuze_matches = pfuze3001_matches; |
| ret = of_regulator_match(dev, parent, pfuze3001_matches, |
| ARRAY_SIZE(pfuze3001_matches)); |
| break; |
| case PFUZE3000: |
| pfuze_matches = pfuze3000_matches; |
| ret = of_regulator_match(dev, parent, pfuze3000_matches, |
| ARRAY_SIZE(pfuze3000_matches)); |
| break; |
| case PFUZE200: |
| pfuze_matches = pfuze200_matches; |
| ret = of_regulator_match(dev, parent, pfuze200_matches, |
| ARRAY_SIZE(pfuze200_matches)); |
| break; |
| |
| case PFUZE100: |
| default: |
| pfuze_matches = pfuze100_matches; |
| ret = of_regulator_match(dev, parent, pfuze100_matches, |
| ARRAY_SIZE(pfuze100_matches)); |
| break; |
| } |
| |
| of_node_put(parent); |
| of_node_put(np); |
| if (ret < 0) { |
| dev_err(dev, "Error parsing regulator init data: %d\n", |
| ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static inline struct regulator_init_data *match_init_data(int index) |
| { |
| return pfuze_matches[index].init_data; |
| } |
| |
| static inline struct device_node *match_of_node(int index) |
| { |
| return pfuze_matches[index].of_node; |
| } |
| |
| static int pfuze_power_off_prepare(struct sys_off_data *data) |
| { |
| struct pfuze_chip *syspm_pfuze_chip = data->cb_data; |
| |
| dev_info(syspm_pfuze_chip->dev, "Configure standby mode for power off"); |
| |
| /* Switch from default mode: APS/APS to APS/Off */ |
| regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW1ABMODE, |
| PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF); |
| regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW1CMODE, |
| PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF); |
| regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW2MODE, |
| PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF); |
| regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW3AMODE, |
| PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF); |
| regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW3BMODE, |
| PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF); |
| regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW4MODE, |
| PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF); |
| |
| regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN1VOL, |
| PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY, |
| PFUZE100_VGENxSTBY); |
| regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN2VOL, |
| PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY, |
| PFUZE100_VGENxSTBY); |
| regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN3VOL, |
| PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY, |
| PFUZE100_VGENxSTBY); |
| regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN4VOL, |
| PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY, |
| PFUZE100_VGENxSTBY); |
| regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN5VOL, |
| PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY, |
| PFUZE100_VGENxSTBY); |
| regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN6VOL, |
| PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY, |
| PFUZE100_VGENxSTBY); |
| |
| return NOTIFY_DONE; |
| } |
| |
| static int pfuze_power_off_prepare_init(struct pfuze_chip *pfuze_chip) |
| { |
| int err; |
| |
| if (pfuze_chip->chip_id != PFUZE100) { |
| dev_warn(pfuze_chip->dev, "Requested pm_power_off_prepare handler for not supported chip\n"); |
| return -ENODEV; |
| } |
| |
| err = devm_register_sys_off_handler(pfuze_chip->dev, |
| SYS_OFF_MODE_POWER_OFF_PREPARE, |
| SYS_OFF_PRIO_DEFAULT, |
| pfuze_power_off_prepare, |
| pfuze_chip); |
| if (err) { |
| dev_err(pfuze_chip->dev, "failed to register sys-off handler: %d\n", |
| err); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int pfuze_identify(struct pfuze_chip *pfuze_chip) |
| { |
| unsigned int value; |
| int ret; |
| |
| ret = regmap_read(pfuze_chip->regmap, PFUZE100_DEVICEID, &value); |
| if (ret) |
| return ret; |
| |
| if (((value & 0x0f) == 0x8) && (pfuze_chip->chip_id == PFUZE100)) { |
| /* |
| * Freescale misprogrammed 1-3% of parts prior to week 8 of 2013 |
| * as ID=8 in PFUZE100 |
| */ |
| dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8"); |
| } else if ((value & 0x0f) != pfuze_chip->chip_id && |
| (value & 0xf0) >> 4 != pfuze_chip->chip_id && |
| (value != pfuze_chip->chip_id)) { |
| /* device id NOT match with your setting */ |
| dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value); |
| return -ENODEV; |
| } |
| |
| ret = regmap_read(pfuze_chip->regmap, PFUZE100_REVID, &value); |
| if (ret) |
| return ret; |
| dev_info(pfuze_chip->dev, |
| "Full layer: %x, Metal layer: %x\n", |
| (value & 0xf0) >> 4, value & 0x0f); |
| |
| ret = regmap_read(pfuze_chip->regmap, PFUZE100_FABID, &value); |
| if (ret) |
| return ret; |
| dev_info(pfuze_chip->dev, "FAB: %x, FIN: %x\n", |
| (value & 0xc) >> 2, value & 0x3); |
| |
| return 0; |
| } |
| |
| static const struct regmap_config pfuze_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = PFUZE_NUMREGS - 1, |
| .cache_type = REGCACHE_RBTREE, |
| }; |
| |
| static int pfuze100_regulator_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct pfuze_chip *pfuze_chip; |
| struct regulator_config config = { }; |
| int i, ret; |
| const struct of_device_id *match; |
| u32 regulator_num; |
| u32 sw_check_start, sw_check_end, sw_hi = 0x40; |
| |
| pfuze_chip = devm_kzalloc(&client->dev, sizeof(*pfuze_chip), |
| GFP_KERNEL); |
| if (!pfuze_chip) |
| return -ENOMEM; |
| |
| if (client->dev.of_node) { |
| match = of_match_device(of_match_ptr(pfuze_dt_ids), |
| &client->dev); |
| if (!match) { |
| dev_err(&client->dev, "Error: No device match found\n"); |
| return -ENODEV; |
| } |
| pfuze_chip->chip_id = (int)(long)match->data; |
| } else if (id) { |
| pfuze_chip->chip_id = id->driver_data; |
| } else { |
| dev_err(&client->dev, "No dts match or id table match found\n"); |
| return -ENODEV; |
| } |
| |
| i2c_set_clientdata(client, pfuze_chip); |
| pfuze_chip->dev = &client->dev; |
| |
| pfuze_chip->regmap = devm_regmap_init_i2c(client, &pfuze_regmap_config); |
| if (IS_ERR(pfuze_chip->regmap)) { |
| ret = PTR_ERR(pfuze_chip->regmap); |
| dev_err(&client->dev, |
| "regmap allocation failed with err %d\n", ret); |
| return ret; |
| } |
| |
| ret = pfuze_identify(pfuze_chip); |
| if (ret) { |
| dev_err(&client->dev, "unrecognized pfuze chip ID!\n"); |
| return ret; |
| } |
| |
| /* use the right regulators after identify the right device */ |
| switch (pfuze_chip->chip_id) { |
| case PFUZE3001: |
| pfuze_chip->pfuze_regulators = pfuze3001_regulators; |
| regulator_num = ARRAY_SIZE(pfuze3001_regulators); |
| sw_check_start = PFUZE3001_SW2; |
| sw_check_end = PFUZE3001_SW2; |
| sw_hi = 1 << 3; |
| break; |
| case PFUZE3000: |
| pfuze_chip->pfuze_regulators = pfuze3000_regulators; |
| regulator_num = ARRAY_SIZE(pfuze3000_regulators); |
| sw_check_start = PFUZE3000_SW2; |
| sw_check_end = PFUZE3000_SW2; |
| sw_hi = 1 << 3; |
| break; |
| case PFUZE200: |
| pfuze_chip->pfuze_regulators = pfuze200_regulators; |
| regulator_num = ARRAY_SIZE(pfuze200_regulators); |
| sw_check_start = PFUZE200_SW2; |
| sw_check_end = PFUZE200_SW3B; |
| break; |
| case PFUZE100: |
| default: |
| pfuze_chip->pfuze_regulators = pfuze100_regulators; |
| regulator_num = ARRAY_SIZE(pfuze100_regulators); |
| sw_check_start = PFUZE100_SW2; |
| sw_check_end = PFUZE100_SW4; |
| break; |
| } |
| dev_info(&client->dev, "pfuze%s found.\n", |
| (pfuze_chip->chip_id == PFUZE100) ? "100" : |
| (((pfuze_chip->chip_id == PFUZE200) ? "200" : |
| ((pfuze_chip->chip_id == PFUZE3000) ? "3000" : "3001")))); |
| |
| memcpy(pfuze_chip->regulator_descs, pfuze_chip->pfuze_regulators, |
| sizeof(pfuze_chip->regulator_descs)); |
| |
| ret = pfuze_parse_regulators_dt(pfuze_chip); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < regulator_num; i++) { |
| struct regulator_init_data *init_data; |
| struct regulator_desc *desc; |
| int val; |
| |
| desc = &pfuze_chip->regulator_descs[i].desc; |
| |
| init_data = match_init_data(i); |
| |
| /* SW2~SW4 high bit check and modify the voltage value table */ |
| if (i >= sw_check_start && i <= sw_check_end) { |
| ret = regmap_read(pfuze_chip->regmap, |
| desc->vsel_reg, &val); |
| if (ret) { |
| dev_err(&client->dev, "Fails to read from the register.\n"); |
| return ret; |
| } |
| |
| if (val & sw_hi) { |
| if (pfuze_chip->chip_id == PFUZE3000 || |
| pfuze_chip->chip_id == PFUZE3001) { |
| desc->volt_table = pfuze3000_sw2hi; |
| desc->n_voltages = ARRAY_SIZE(pfuze3000_sw2hi); |
| } else { |
| desc->min_uV = 800000; |
| desc->uV_step = 50000; |
| desc->n_voltages = 51; |
| } |
| } |
| } |
| |
| /* |
| * Allow SW regulators to turn off. Checking it trough a flag is |
| * a workaround to keep the backward compatibility with existing |
| * old dtb's which may relay on the fact that we didn't disable |
| * the switched regulator till yet. |
| */ |
| if (pfuze_chip->flags & PFUZE_FLAG_DISABLE_SW) { |
| if (pfuze_chip->chip_id == PFUZE100 || |
| pfuze_chip->chip_id == PFUZE200) { |
| if (pfuze_chip->regulator_descs[i].sw_reg) { |
| desc->ops = &pfuze100_sw_disable_regulator_ops; |
| desc->enable_val = 0x8; |
| desc->disable_val = 0x0; |
| desc->enable_time = 500; |
| } |
| } |
| } |
| |
| config.dev = &client->dev; |
| config.init_data = init_data; |
| config.driver_data = pfuze_chip; |
| config.of_node = match_of_node(i); |
| |
| pfuze_chip->regulators[i] = |
| devm_regulator_register(&client->dev, desc, &config); |
| if (IS_ERR(pfuze_chip->regulators[i])) { |
| dev_err(&client->dev, "register regulator%s failed\n", |
| pfuze_chip->pfuze_regulators[i].desc.name); |
| return PTR_ERR(pfuze_chip->regulators[i]); |
| } |
| } |
| |
| if (of_property_read_bool(client->dev.of_node, |
| "fsl,pmic-stby-poweroff")) |
| return pfuze_power_off_prepare_init(pfuze_chip); |
| |
| return 0; |
| } |
| |
| static struct i2c_driver pfuze_driver = { |
| .driver = { |
| .name = "pfuze100-regulator", |
| .of_match_table = pfuze_dt_ids, |
| }, |
| .probe = pfuze100_regulator_probe, |
| }; |
| module_i2c_driver(pfuze_driver); |
| |
| MODULE_AUTHOR("Robin Gong <b38343@freescale.com>"); |
| MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/200/3000/3001 PMIC"); |
| MODULE_LICENSE("GPL v2"); |