| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * ACPI Hardware Watchdog (WDAT) driver. |
| * |
| * Copyright (C) 2016, Intel Corporation |
| * Author: Mika Westerberg <mika.westerberg@linux.intel.com> |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/ioport.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm.h> |
| #include <linux/watchdog.h> |
| |
| #define MAX_WDAT_ACTIONS ACPI_WDAT_ACTION_RESERVED |
| |
| /** |
| * struct wdat_instruction - Single ACPI WDAT instruction |
| * @entry: Copy of the ACPI table instruction |
| * @reg: Register the instruction is accessing |
| * @node: Next instruction in action sequence |
| */ |
| struct wdat_instruction { |
| struct acpi_wdat_entry entry; |
| void __iomem *reg; |
| struct list_head node; |
| }; |
| |
| /** |
| * struct wdat_wdt - ACPI WDAT watchdog device |
| * @pdev: Parent platform device |
| * @wdd: Watchdog core device |
| * @period: How long is one watchdog period in ms |
| * @stopped_in_sleep: Is this watchdog stopped by the firmware in S1-S5 |
| * @stopped: Was the watchdog stopped by the driver in suspend |
| * @instructions: An array of instruction lists indexed by an action number from |
| * the WDAT table. There can be %NULL entries for not implemented |
| * actions. |
| */ |
| struct wdat_wdt { |
| struct platform_device *pdev; |
| struct watchdog_device wdd; |
| unsigned int period; |
| bool stopped_in_sleep; |
| bool stopped; |
| struct list_head *instructions[MAX_WDAT_ACTIONS]; |
| }; |
| |
| #define to_wdat_wdt(wdd) container_of(wdd, struct wdat_wdt, wdd) |
| |
| static bool nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, bool, 0); |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" |
| __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| #define WDAT_DEFAULT_TIMEOUT 30 |
| |
| static int timeout = WDAT_DEFAULT_TIMEOUT; |
| module_param(timeout, int, 0); |
| MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default=" |
| __MODULE_STRING(WDAT_DEFAULT_TIMEOUT) ")"); |
| |
| static int wdat_wdt_read(struct wdat_wdt *wdat, |
| const struct wdat_instruction *instr, u32 *value) |
| { |
| const struct acpi_generic_address *gas = &instr->entry.register_region; |
| |
| switch (gas->access_width) { |
| case 1: |
| *value = ioread8(instr->reg); |
| break; |
| case 2: |
| *value = ioread16(instr->reg); |
| break; |
| case 3: |
| *value = ioread32(instr->reg); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| dev_dbg(&wdat->pdev->dev, "Read %#x from 0x%08llx\n", *value, |
| gas->address); |
| |
| return 0; |
| } |
| |
| static int wdat_wdt_write(struct wdat_wdt *wdat, |
| const struct wdat_instruction *instr, u32 value) |
| { |
| const struct acpi_generic_address *gas = &instr->entry.register_region; |
| |
| switch (gas->access_width) { |
| case 1: |
| iowrite8((u8)value, instr->reg); |
| break; |
| case 2: |
| iowrite16((u16)value, instr->reg); |
| break; |
| case 3: |
| iowrite32(value, instr->reg); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| dev_dbg(&wdat->pdev->dev, "Wrote %#x to 0x%08llx\n", value, |
| gas->address); |
| |
| return 0; |
| } |
| |
| static int wdat_wdt_run_action(struct wdat_wdt *wdat, unsigned int action, |
| u32 param, u32 *retval) |
| { |
| struct wdat_instruction *instr; |
| |
| if (action >= ARRAY_SIZE(wdat->instructions)) |
| return -EINVAL; |
| |
| if (!wdat->instructions[action]) |
| return -EOPNOTSUPP; |
| |
| dev_dbg(&wdat->pdev->dev, "Running action %#x\n", action); |
| |
| /* Run each instruction sequentially */ |
| list_for_each_entry(instr, wdat->instructions[action], node) { |
| const struct acpi_wdat_entry *entry = &instr->entry; |
| const struct acpi_generic_address *gas; |
| u32 flags, value, mask, x, y; |
| bool preserve; |
| int ret; |
| |
| gas = &entry->register_region; |
| |
| preserve = entry->instruction & ACPI_WDAT_PRESERVE_REGISTER; |
| flags = entry->instruction & ~ACPI_WDAT_PRESERVE_REGISTER; |
| value = entry->value; |
| mask = entry->mask; |
| |
| switch (flags) { |
| case ACPI_WDAT_READ_VALUE: |
| ret = wdat_wdt_read(wdat, instr, &x); |
| if (ret) |
| return ret; |
| x >>= gas->bit_offset; |
| x &= mask; |
| if (retval) |
| *retval = x == value; |
| break; |
| |
| case ACPI_WDAT_READ_COUNTDOWN: |
| ret = wdat_wdt_read(wdat, instr, &x); |
| if (ret) |
| return ret; |
| x >>= gas->bit_offset; |
| x &= mask; |
| if (retval) |
| *retval = x; |
| break; |
| |
| case ACPI_WDAT_WRITE_VALUE: |
| x = value & mask; |
| x <<= gas->bit_offset; |
| if (preserve) { |
| ret = wdat_wdt_read(wdat, instr, &y); |
| if (ret) |
| return ret; |
| y = y & ~(mask << gas->bit_offset); |
| x |= y; |
| } |
| ret = wdat_wdt_write(wdat, instr, x); |
| if (ret) |
| return ret; |
| break; |
| |
| case ACPI_WDAT_WRITE_COUNTDOWN: |
| x = param; |
| x &= mask; |
| x <<= gas->bit_offset; |
| if (preserve) { |
| ret = wdat_wdt_read(wdat, instr, &y); |
| if (ret) |
| return ret; |
| y = y & ~(mask << gas->bit_offset); |
| x |= y; |
| } |
| ret = wdat_wdt_write(wdat, instr, x); |
| if (ret) |
| return ret; |
| break; |
| |
| default: |
| dev_err(&wdat->pdev->dev, "Unknown instruction: %u\n", |
| flags); |
| return -EINVAL; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int wdat_wdt_enable_reboot(struct wdat_wdt *wdat) |
| { |
| int ret; |
| |
| /* |
| * WDAT specification says that the watchdog is required to reboot |
| * the system when it fires. However, it also states that it is |
| * recommended to make it configurable through hardware register. We |
| * enable reboot now if it is configurable, just in case. |
| */ |
| ret = wdat_wdt_run_action(wdat, ACPI_WDAT_SET_REBOOT, 0, NULL); |
| if (ret && ret != -EOPNOTSUPP) { |
| dev_err(&wdat->pdev->dev, |
| "Failed to enable reboot when watchdog triggers\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void wdat_wdt_boot_status(struct wdat_wdt *wdat) |
| { |
| u32 boot_status = 0; |
| int ret; |
| |
| ret = wdat_wdt_run_action(wdat, ACPI_WDAT_GET_STATUS, 0, &boot_status); |
| if (ret && ret != -EOPNOTSUPP) { |
| dev_err(&wdat->pdev->dev, "Failed to read boot status\n"); |
| return; |
| } |
| |
| if (boot_status) |
| wdat->wdd.bootstatus = WDIOF_CARDRESET; |
| |
| /* Clear the boot status in case BIOS did not do it */ |
| ret = wdat_wdt_run_action(wdat, ACPI_WDAT_SET_STATUS, 0, NULL); |
| if (ret && ret != -EOPNOTSUPP) |
| dev_err(&wdat->pdev->dev, "Failed to clear boot status\n"); |
| } |
| |
| static void wdat_wdt_set_running(struct wdat_wdt *wdat) |
| { |
| u32 running = 0; |
| int ret; |
| |
| ret = wdat_wdt_run_action(wdat, ACPI_WDAT_GET_RUNNING_STATE, 0, |
| &running); |
| if (ret && ret != -EOPNOTSUPP) |
| dev_err(&wdat->pdev->dev, "Failed to read running state\n"); |
| |
| if (running) |
| set_bit(WDOG_HW_RUNNING, &wdat->wdd.status); |
| } |
| |
| static int wdat_wdt_start(struct watchdog_device *wdd) |
| { |
| return wdat_wdt_run_action(to_wdat_wdt(wdd), |
| ACPI_WDAT_SET_RUNNING_STATE, 0, NULL); |
| } |
| |
| static int wdat_wdt_stop(struct watchdog_device *wdd) |
| { |
| return wdat_wdt_run_action(to_wdat_wdt(wdd), |
| ACPI_WDAT_SET_STOPPED_STATE, 0, NULL); |
| } |
| |
| static int wdat_wdt_ping(struct watchdog_device *wdd) |
| { |
| return wdat_wdt_run_action(to_wdat_wdt(wdd), ACPI_WDAT_RESET, 0, NULL); |
| } |
| |
| static int wdat_wdt_set_timeout(struct watchdog_device *wdd, |
| unsigned int timeout) |
| { |
| struct wdat_wdt *wdat = to_wdat_wdt(wdd); |
| unsigned int periods; |
| int ret; |
| |
| periods = timeout * 1000 / wdat->period; |
| ret = wdat_wdt_run_action(wdat, ACPI_WDAT_SET_COUNTDOWN, periods, NULL); |
| if (!ret) |
| wdd->timeout = timeout; |
| return ret; |
| } |
| |
| static unsigned int wdat_wdt_get_timeleft(struct watchdog_device *wdd) |
| { |
| struct wdat_wdt *wdat = to_wdat_wdt(wdd); |
| u32 periods = 0; |
| |
| wdat_wdt_run_action(wdat, ACPI_WDAT_GET_CURRENT_COUNTDOWN, 0, &periods); |
| return periods * wdat->period / 1000; |
| } |
| |
| static const struct watchdog_info wdat_wdt_info = { |
| .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, |
| .firmware_version = 0, |
| .identity = "wdat_wdt", |
| }; |
| |
| static const struct watchdog_ops wdat_wdt_ops = { |
| .owner = THIS_MODULE, |
| .start = wdat_wdt_start, |
| .stop = wdat_wdt_stop, |
| .ping = wdat_wdt_ping, |
| .set_timeout = wdat_wdt_set_timeout, |
| .get_timeleft = wdat_wdt_get_timeleft, |
| }; |
| |
| static int wdat_wdt_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| const struct acpi_wdat_entry *entries; |
| const struct acpi_table_wdat *tbl; |
| struct wdat_wdt *wdat; |
| struct resource *res; |
| void __iomem **regs; |
| acpi_status status; |
| int i, ret; |
| |
| status = acpi_get_table(ACPI_SIG_WDAT, 0, |
| (struct acpi_table_header **)&tbl); |
| if (ACPI_FAILURE(status)) |
| return -ENODEV; |
| |
| wdat = devm_kzalloc(dev, sizeof(*wdat), GFP_KERNEL); |
| if (!wdat) |
| return -ENOMEM; |
| |
| regs = devm_kcalloc(dev, pdev->num_resources, sizeof(*regs), |
| GFP_KERNEL); |
| if (!regs) |
| return -ENOMEM; |
| |
| /* WDAT specification wants to have >= 1ms period */ |
| if (tbl->timer_period < 1) |
| return -EINVAL; |
| if (tbl->min_count > tbl->max_count) |
| return -EINVAL; |
| |
| wdat->period = tbl->timer_period; |
| wdat->wdd.min_hw_heartbeat_ms = wdat->period * tbl->min_count; |
| wdat->wdd.max_hw_heartbeat_ms = wdat->period * tbl->max_count; |
| wdat->wdd.min_timeout = 1; |
| wdat->stopped_in_sleep = tbl->flags & ACPI_WDAT_STOPPED; |
| wdat->wdd.info = &wdat_wdt_info; |
| wdat->wdd.ops = &wdat_wdt_ops; |
| wdat->pdev = pdev; |
| |
| /* Request and map all resources */ |
| for (i = 0; i < pdev->num_resources; i++) { |
| void __iomem *reg; |
| |
| res = &pdev->resource[i]; |
| if (resource_type(res) == IORESOURCE_MEM) { |
| reg = devm_ioremap_resource(dev, res); |
| if (IS_ERR(reg)) |
| return PTR_ERR(reg); |
| } else if (resource_type(res) == IORESOURCE_IO) { |
| reg = devm_ioport_map(dev, res->start, 1); |
| if (!reg) |
| return -ENOMEM; |
| } else { |
| dev_err(dev, "Unsupported resource\n"); |
| return -EINVAL; |
| } |
| |
| regs[i] = reg; |
| } |
| |
| entries = (struct acpi_wdat_entry *)(tbl + 1); |
| for (i = 0; i < tbl->entries; i++) { |
| const struct acpi_generic_address *gas; |
| struct wdat_instruction *instr; |
| struct list_head *instructions; |
| unsigned int action; |
| struct resource r; |
| int j; |
| |
| action = entries[i].action; |
| if (action >= MAX_WDAT_ACTIONS) { |
| dev_dbg(dev, "Skipping unknown action: %u\n", action); |
| continue; |
| } |
| |
| instr = devm_kzalloc(dev, sizeof(*instr), GFP_KERNEL); |
| if (!instr) |
| return -ENOMEM; |
| |
| INIT_LIST_HEAD(&instr->node); |
| instr->entry = entries[i]; |
| |
| gas = &entries[i].register_region; |
| |
| memset(&r, 0, sizeof(r)); |
| r.start = gas->address; |
| r.end = r.start + ACPI_ACCESS_BYTE_WIDTH(gas->access_width) - 1; |
| if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { |
| r.flags = IORESOURCE_MEM; |
| } else if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_IO) { |
| r.flags = IORESOURCE_IO; |
| } else { |
| dev_dbg(dev, "Unsupported address space: %d\n", |
| gas->space_id); |
| continue; |
| } |
| |
| /* Find the matching resource */ |
| for (j = 0; j < pdev->num_resources; j++) { |
| res = &pdev->resource[j]; |
| if (resource_contains(res, &r)) { |
| instr->reg = regs[j] + r.start - res->start; |
| break; |
| } |
| } |
| |
| if (!instr->reg) { |
| dev_err(dev, "I/O resource not found\n"); |
| return -EINVAL; |
| } |
| |
| instructions = wdat->instructions[action]; |
| if (!instructions) { |
| instructions = devm_kzalloc(dev, |
| sizeof(*instructions), |
| GFP_KERNEL); |
| if (!instructions) |
| return -ENOMEM; |
| |
| INIT_LIST_HEAD(instructions); |
| wdat->instructions[action] = instructions; |
| } |
| |
| list_add_tail(&instr->node, instructions); |
| } |
| |
| wdat_wdt_boot_status(wdat); |
| wdat_wdt_set_running(wdat); |
| |
| ret = wdat_wdt_enable_reboot(wdat); |
| if (ret) |
| return ret; |
| |
| platform_set_drvdata(pdev, wdat); |
| |
| /* |
| * Set initial timeout so that userspace has time to configure the |
| * watchdog properly after it has opened the device. In some cases |
| * the BIOS default is too short and causes immediate reboot. |
| */ |
| if (watchdog_timeout_invalid(&wdat->wdd, timeout)) { |
| dev_warn(dev, "Invalid timeout %d given, using %d\n", |
| timeout, WDAT_DEFAULT_TIMEOUT); |
| timeout = WDAT_DEFAULT_TIMEOUT; |
| } |
| |
| ret = wdat_wdt_set_timeout(&wdat->wdd, timeout); |
| if (ret) |
| return ret; |
| |
| watchdog_set_nowayout(&wdat->wdd, nowayout); |
| watchdog_stop_on_reboot(&wdat->wdd); |
| watchdog_stop_on_unregister(&wdat->wdd); |
| return devm_watchdog_register_device(dev, &wdat->wdd); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int wdat_wdt_suspend_noirq(struct device *dev) |
| { |
| struct wdat_wdt *wdat = dev_get_drvdata(dev); |
| int ret; |
| |
| if (!watchdog_active(&wdat->wdd)) |
| return 0; |
| |
| /* |
| * We need to stop the watchdog if firmware is not doing it or if we |
| * are going suspend to idle (where firmware is not involved). If |
| * firmware is stopping the watchdog we kick it here one more time |
| * to give it some time. |
| */ |
| wdat->stopped = false; |
| if (acpi_target_system_state() == ACPI_STATE_S0 || |
| !wdat->stopped_in_sleep) { |
| ret = wdat_wdt_stop(&wdat->wdd); |
| if (!ret) |
| wdat->stopped = true; |
| } else { |
| ret = wdat_wdt_ping(&wdat->wdd); |
| } |
| |
| return ret; |
| } |
| |
| static int wdat_wdt_resume_noirq(struct device *dev) |
| { |
| struct wdat_wdt *wdat = dev_get_drvdata(dev); |
| int ret; |
| |
| if (!watchdog_active(&wdat->wdd)) |
| return 0; |
| |
| if (!wdat->stopped) { |
| /* |
| * Looks like the boot firmware reinitializes the watchdog |
| * before it hands off to the OS on resume from sleep so we |
| * stop and reprogram the watchdog here. |
| */ |
| ret = wdat_wdt_stop(&wdat->wdd); |
| if (ret) |
| return ret; |
| |
| ret = wdat_wdt_set_timeout(&wdat->wdd, wdat->wdd.timeout); |
| if (ret) |
| return ret; |
| |
| ret = wdat_wdt_enable_reboot(wdat); |
| if (ret) |
| return ret; |
| |
| ret = wdat_wdt_ping(&wdat->wdd); |
| if (ret) |
| return ret; |
| } |
| |
| return wdat_wdt_start(&wdat->wdd); |
| } |
| #endif |
| |
| static const struct dev_pm_ops wdat_wdt_pm_ops = { |
| SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(wdat_wdt_suspend_noirq, |
| wdat_wdt_resume_noirq) |
| }; |
| |
| static struct platform_driver wdat_wdt_driver = { |
| .probe = wdat_wdt_probe, |
| .driver = { |
| .name = "wdat_wdt", |
| .pm = &wdat_wdt_pm_ops, |
| }, |
| }; |
| |
| module_platform_driver(wdat_wdt_driver); |
| |
| MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>"); |
| MODULE_DESCRIPTION("ACPI Hardware Watchdog (WDAT) driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:wdat_wdt"); |