| ES7241 i2s AD converter |
| |
| Required properties: |
| - compatible : "everest,es7241" |
| - VDDP-supply: regulator phandle for the VDDA supply |
| - VDDA-supply: regulator phandle for the VDDP supply |
| - VDDD-supply: regulator phandle for the VDDD supply |
| |
| Optional properties: |
| - reset-gpios: gpio connected to the reset pin |
| - m0-gpios : gpio connected to the m0 pin |
| - m1-gpios : gpio connected to the m1 pin |
| - everest,sdout-pull-down: |
| Format used by the serial interface is controlled by pulling |
| the sdout. If the sdout is pulled down, leftj format is used. |
| If this property is not provided, sdout is assumed to pulled |
| up and i2s format is used |
| |
| Example: |
| |
| linein: audio-codec@2 { |
| #sound-dai-cells = <0>; |
| compatible = "everest,es7241"; |
| VDDA-supply = <&vcc_3v3>; |
| VDDP-supply = <&vcc_3v3>; |
| VDDD-supply = <&vcc_3v3>; |
| reset-gpios = <&gpio GPIOH_42>; |
| }; |
