| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Test for find_*_bit functions. |
| * |
| * Copyright (c) 2017 Cavium. |
| */ |
| |
| /* |
| * find_bit functions are widely used in kernel, so the successful boot |
| * is good enough test for correctness. |
| * |
| * This test is focused on performance of traversing bitmaps. Two typical |
| * scenarios are reproduced: |
| * - randomly filled bitmap with approximately equal number of set and |
| * cleared bits; |
| * - sparse bitmap with few set bits at random positions. |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/kernel.h> |
| #include <linux/list.h> |
| #include <linux/module.h> |
| #include <linux/printk.h> |
| #include <linux/random.h> |
| |
| #define BITMAP_LEN (4096UL * 8 * 10) |
| #define SPARSE 500 |
| |
| static DECLARE_BITMAP(bitmap, BITMAP_LEN) __initdata; |
| static DECLARE_BITMAP(bitmap2, BITMAP_LEN) __initdata; |
| |
| /* |
| * This is Schlemiel the Painter's algorithm. It should be called after |
| * all other tests for the same bitmap because it sets all bits of bitmap to 1. |
| */ |
| static int __init test_find_first_bit(void *bitmap, unsigned long len) |
| { |
| unsigned long i, cnt; |
| ktime_t time; |
| |
| time = ktime_get(); |
| for (cnt = i = 0; i < len; cnt++) { |
| i = find_first_bit(bitmap, len); |
| __clear_bit(i, bitmap); |
| } |
| time = ktime_get() - time; |
| pr_err("find_first_bit: %18llu ns, %6ld iterations\n", time, cnt); |
| |
| return 0; |
| } |
| |
| static int __init test_find_first_and_bit(void *bitmap, const void *bitmap2, unsigned long len) |
| { |
| static DECLARE_BITMAP(cp, BITMAP_LEN) __initdata; |
| unsigned long i, cnt; |
| ktime_t time; |
| |
| bitmap_copy(cp, bitmap, BITMAP_LEN); |
| |
| time = ktime_get(); |
| for (cnt = i = 0; i < len; cnt++) { |
| i = find_first_and_bit(cp, bitmap2, len); |
| __clear_bit(i, cp); |
| } |
| time = ktime_get() - time; |
| pr_err("find_first_and_bit: %18llu ns, %6ld iterations\n", time, cnt); |
| |
| return 0; |
| } |
| |
| static int __init test_find_next_bit(const void *bitmap, unsigned long len) |
| { |
| unsigned long i, cnt; |
| ktime_t time; |
| |
| time = ktime_get(); |
| for (cnt = i = 0; i < BITMAP_LEN; cnt++) |
| i = find_next_bit(bitmap, BITMAP_LEN, i) + 1; |
| time = ktime_get() - time; |
| pr_err("find_next_bit: %18llu ns, %6ld iterations\n", time, cnt); |
| |
| return 0; |
| } |
| |
| static int __init test_find_next_zero_bit(const void *bitmap, unsigned long len) |
| { |
| unsigned long i, cnt; |
| ktime_t time; |
| |
| time = ktime_get(); |
| for (cnt = i = 0; i < BITMAP_LEN; cnt++) |
| i = find_next_zero_bit(bitmap, len, i) + 1; |
| time = ktime_get() - time; |
| pr_err("find_next_zero_bit: %18llu ns, %6ld iterations\n", time, cnt); |
| |
| return 0; |
| } |
| |
| static int __init test_find_last_bit(const void *bitmap, unsigned long len) |
| { |
| unsigned long l, cnt = 0; |
| ktime_t time; |
| |
| time = ktime_get(); |
| do { |
| cnt++; |
| l = find_last_bit(bitmap, len); |
| if (l >= len) |
| break; |
| len = l; |
| } while (len); |
| time = ktime_get() - time; |
| pr_err("find_last_bit: %18llu ns, %6ld iterations\n", time, cnt); |
| |
| return 0; |
| } |
| |
| static int __init test_find_next_and_bit(const void *bitmap, |
| const void *bitmap2, unsigned long len) |
| { |
| unsigned long i, cnt; |
| ktime_t time; |
| |
| time = ktime_get(); |
| for (cnt = i = 0; i < BITMAP_LEN; cnt++) |
| i = find_next_and_bit(bitmap, bitmap2, BITMAP_LEN, i + 1); |
| time = ktime_get() - time; |
| pr_err("find_next_and_bit: %18llu ns, %6ld iterations\n", time, cnt); |
| |
| return 0; |
| } |
| |
| static int __init find_bit_test(void) |
| { |
| unsigned long nbits = BITMAP_LEN / SPARSE; |
| |
| pr_err("\nStart testing find_bit() with random-filled bitmap\n"); |
| |
| get_random_bytes(bitmap, sizeof(bitmap)); |
| get_random_bytes(bitmap2, sizeof(bitmap2)); |
| |
| test_find_next_bit(bitmap, BITMAP_LEN); |
| test_find_next_zero_bit(bitmap, BITMAP_LEN); |
| test_find_last_bit(bitmap, BITMAP_LEN); |
| |
| /* |
| * test_find_first_bit() may take some time, so |
| * traverse only part of bitmap to avoid soft lockup. |
| */ |
| test_find_first_bit(bitmap, BITMAP_LEN / 10); |
| test_find_first_and_bit(bitmap, bitmap2, BITMAP_LEN / 2); |
| test_find_next_and_bit(bitmap, bitmap2, BITMAP_LEN); |
| |
| pr_err("\nStart testing find_bit() with sparse bitmap\n"); |
| |
| bitmap_zero(bitmap, BITMAP_LEN); |
| bitmap_zero(bitmap2, BITMAP_LEN); |
| |
| while (nbits--) { |
| __set_bit(prandom_u32() % BITMAP_LEN, bitmap); |
| __set_bit(prandom_u32() % BITMAP_LEN, bitmap2); |
| } |
| |
| test_find_next_bit(bitmap, BITMAP_LEN); |
| test_find_next_zero_bit(bitmap, BITMAP_LEN); |
| test_find_last_bit(bitmap, BITMAP_LEN); |
| test_find_first_bit(bitmap, BITMAP_LEN); |
| test_find_first_and_bit(bitmap, bitmap2, BITMAP_LEN); |
| test_find_next_and_bit(bitmap, bitmap2, BITMAP_LEN); |
| |
| /* |
| * Everything is OK. Return error just to let user run benchmark |
| * again without annoying rmmod. |
| */ |
| return -EINVAL; |
| } |
| module_init(find_bit_test); |
| |
| MODULE_LICENSE("GPL"); |