blob: d1f652802181e5ac9415b41bc608d3c654fc67ff [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Xilinx Zynq MPSoC Firmware layer
*
* Copyright (C) 2014-2022 Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
* Davorin Mista <davorin.mista@aggios.com>
* Jolly Shah <jollys@xilinx.com>
* Rajan Vaja <rajanv@xilinx.com>
*/
#include <linux/arm-smccc.h>
#include <linux/compiler.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/mfd/core.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/hashtable.h>
#include <linux/firmware/xlnx-zynqmp.h>
#include <linux/firmware/xlnx-event-manager.h>
#include "zynqmp-debug.h"
/* Max HashMap Order for PM API feature check (1<<7 = 128) */
#define PM_API_FEATURE_CHECK_MAX_ORDER 7
/* CRL registers and bitfields */
#define CRL_APB_BASE 0xFF5E0000U
/* BOOT_PIN_CTRL- Used to control the mode pins after boot */
#define CRL_APB_BOOT_PIN_CTRL (CRL_APB_BASE + (0x250U))
/* BOOT_PIN_CTRL_MASK- out_val[11:8], out_en[3:0] */
#define CRL_APB_BOOTPIN_CTRL_MASK 0xF0FU
/* IOCTL/QUERY feature payload size */
#define FEATURE_PAYLOAD_SIZE 2
/* Firmware feature check version mask */
#define FIRMWARE_VERSION_MASK GENMASK(15, 0)
static bool feature_check_enabled;
static DEFINE_HASHTABLE(pm_api_features_map, PM_API_FEATURE_CHECK_MAX_ORDER);
static u32 ioctl_features[FEATURE_PAYLOAD_SIZE];
static u32 query_features[FEATURE_PAYLOAD_SIZE];
static struct platform_device *em_dev;
/**
* struct zynqmp_devinfo - Structure for Zynqmp device instance
* @dev: Device Pointer
* @feature_conf_id: Feature conf id
*/
struct zynqmp_devinfo {
struct device *dev;
u32 feature_conf_id;
};
/**
* struct pm_api_feature_data - PM API Feature data
* @pm_api_id: PM API Id, used as key to index into hashmap
* @feature_status: status of PM API feature: valid, invalid
* @hentry: hlist_node that hooks this entry into hashtable
*/
struct pm_api_feature_data {
u32 pm_api_id;
int feature_status;
struct hlist_node hentry;
};
static const struct mfd_cell firmware_devs[] = {
{
.name = "zynqmp_power_controller",
},
};
/**
* zynqmp_pm_ret_code() - Convert PMU-FW error codes to Linux error codes
* @ret_status: PMUFW return code
*
* Return: corresponding Linux error code
*/
static int zynqmp_pm_ret_code(u32 ret_status)
{
switch (ret_status) {
case XST_PM_SUCCESS:
case XST_PM_DOUBLE_REQ:
return 0;
case XST_PM_NO_FEATURE:
return -ENOTSUPP;
case XST_PM_NO_ACCESS:
return -EACCES;
case XST_PM_ABORT_SUSPEND:
return -ECANCELED;
case XST_PM_MULT_USER:
return -EUSERS;
case XST_PM_INTERNAL:
case XST_PM_CONFLICT:
case XST_PM_INVALID_NODE:
default:
return -EINVAL;
}
}
static noinline int do_fw_call_fail(u64 arg0, u64 arg1, u64 arg2,
u32 *ret_payload)
{
return -ENODEV;
}
/*
* PM function call wrapper
* Invoke do_fw_call_smc or do_fw_call_hvc, depending on the configuration
*/
static int (*do_fw_call)(u64, u64, u64, u32 *ret_payload) = do_fw_call_fail;
/**
* do_fw_call_smc() - Call system-level platform management layer (SMC)
* @arg0: Argument 0 to SMC call
* @arg1: Argument 1 to SMC call
* @arg2: Argument 2 to SMC call
* @ret_payload: Returned value array
*
* Invoke platform management function via SMC call (no hypervisor present).
*
* Return: Returns status, either success or error+reason
*/
static noinline int do_fw_call_smc(u64 arg0, u64 arg1, u64 arg2,
u32 *ret_payload)
{
struct arm_smccc_res res;
arm_smccc_smc(arg0, arg1, arg2, 0, 0, 0, 0, 0, &res);
if (ret_payload) {
ret_payload[0] = lower_32_bits(res.a0);
ret_payload[1] = upper_32_bits(res.a0);
ret_payload[2] = lower_32_bits(res.a1);
ret_payload[3] = upper_32_bits(res.a1);
}
return zynqmp_pm_ret_code((enum pm_ret_status)res.a0);
}
/**
* do_fw_call_hvc() - Call system-level platform management layer (HVC)
* @arg0: Argument 0 to HVC call
* @arg1: Argument 1 to HVC call
* @arg2: Argument 2 to HVC call
* @ret_payload: Returned value array
*
* Invoke platform management function via HVC
* HVC-based for communication through hypervisor
* (no direct communication with ATF).
*
* Return: Returns status, either success or error+reason
*/
static noinline int do_fw_call_hvc(u64 arg0, u64 arg1, u64 arg2,
u32 *ret_payload)
{
struct arm_smccc_res res;
arm_smccc_hvc(arg0, arg1, arg2, 0, 0, 0, 0, 0, &res);
if (ret_payload) {
ret_payload[0] = lower_32_bits(res.a0);
ret_payload[1] = upper_32_bits(res.a0);
ret_payload[2] = lower_32_bits(res.a1);
ret_payload[3] = upper_32_bits(res.a1);
}
return zynqmp_pm_ret_code((enum pm_ret_status)res.a0);
}
static int __do_feature_check_call(const u32 api_id, u32 *ret_payload)
{
int ret;
u64 smc_arg[2];
smc_arg[0] = PM_SIP_SVC | PM_FEATURE_CHECK;
smc_arg[1] = api_id;
ret = do_fw_call(smc_arg[0], smc_arg[1], 0, ret_payload);
if (ret)
ret = -EOPNOTSUPP;
else
ret = ret_payload[1];
return ret;
}
static int do_feature_check_call(const u32 api_id)
{
int ret;
u32 ret_payload[PAYLOAD_ARG_CNT];
struct pm_api_feature_data *feature_data;
/* Check for existing entry in hash table for given api */
hash_for_each_possible(pm_api_features_map, feature_data, hentry,
api_id) {
if (feature_data->pm_api_id == api_id)
return feature_data->feature_status;
}
/* Add new entry if not present */
feature_data = kmalloc(sizeof(*feature_data), GFP_KERNEL);
if (!feature_data)
return -ENOMEM;
feature_data->pm_api_id = api_id;
ret = __do_feature_check_call(api_id, ret_payload);
feature_data->feature_status = ret;
hash_add(pm_api_features_map, &feature_data->hentry, api_id);
if (api_id == PM_IOCTL)
/* Store supported IOCTL IDs mask */
memcpy(ioctl_features, &ret_payload[2], FEATURE_PAYLOAD_SIZE * 4);
else if (api_id == PM_QUERY_DATA)
/* Store supported QUERY IDs mask */
memcpy(query_features, &ret_payload[2], FEATURE_PAYLOAD_SIZE * 4);
return ret;
}
EXPORT_SYMBOL_GPL(zynqmp_pm_feature);
/**
* zynqmp_pm_feature() - Check whether given feature is supported or not and
* store supported IOCTL/QUERY ID mask
* @api_id: API ID to check
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_feature(const u32 api_id)
{
int ret;
if (!feature_check_enabled)
return 0;
ret = do_feature_check_call(api_id);
return ret;
}
/**
* zynqmp_pm_is_function_supported() - Check whether given IOCTL/QUERY function
* is supported or not
* @api_id: PM_IOCTL or PM_QUERY_DATA
* @id: IOCTL or QUERY function IDs
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_is_function_supported(const u32 api_id, const u32 id)
{
int ret;
u32 *bit_mask;
/* Input arguments validation */
if (id >= 64 || (api_id != PM_IOCTL && api_id != PM_QUERY_DATA))
return -EINVAL;
/* Check feature check API version */
ret = do_feature_check_call(PM_FEATURE_CHECK);
if (ret < 0)
return ret;
/* Check if feature check version 2 is supported or not */
if ((ret & FIRMWARE_VERSION_MASK) == PM_API_VERSION_2) {
/*
* Call feature check for IOCTL/QUERY API to get IOCTL ID or
* QUERY ID feature status.
*/
ret = do_feature_check_call(api_id);
if (ret < 0)
return ret;
bit_mask = (api_id == PM_IOCTL) ? ioctl_features : query_features;
if ((bit_mask[(id / 32)] & BIT((id % 32))) == 0U)
return -EOPNOTSUPP;
} else {
return -ENODATA;
}
return 0;
}
EXPORT_SYMBOL_GPL(zynqmp_pm_is_function_supported);
/**
* zynqmp_pm_invoke_fn() - Invoke the system-level platform management layer
* caller function depending on the configuration
* @pm_api_id: Requested PM-API call
* @arg0: Argument 0 to requested PM-API call
* @arg1: Argument 1 to requested PM-API call
* @arg2: Argument 2 to requested PM-API call
* @arg3: Argument 3 to requested PM-API call
* @ret_payload: Returned value array
*
* Invoke platform management function for SMC or HVC call, depending on
* configuration.
* Following SMC Calling Convention (SMCCC) for SMC64:
* Pm Function Identifier,
* PM_SIP_SVC + PM_API_ID =
* ((SMC_TYPE_FAST << FUNCID_TYPE_SHIFT)
* ((SMC_64) << FUNCID_CC_SHIFT)
* ((SIP_START) << FUNCID_OEN_SHIFT)
* ((PM_API_ID) & FUNCID_NUM_MASK))
*
* PM_SIP_SVC - Registered ZynqMP SIP Service Call.
* PM_API_ID - Platform Management API ID.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
u32 arg2, u32 arg3, u32 *ret_payload)
{
/*
* Added SIP service call Function Identifier
* Make sure to stay in x0 register
*/
u64 smc_arg[4];
int ret;
/* Check if feature is supported or not */
ret = zynqmp_pm_feature(pm_api_id);
if (ret < 0)
return ret;
smc_arg[0] = PM_SIP_SVC | pm_api_id;
smc_arg[1] = ((u64)arg1 << 32) | arg0;
smc_arg[2] = ((u64)arg3 << 32) | arg2;
return do_fw_call(smc_arg[0], smc_arg[1], smc_arg[2], ret_payload);
}
static u32 pm_api_version;
static u32 pm_tz_version;
int zynqmp_pm_register_sgi(u32 sgi_num, u32 reset)
{
int ret;
ret = zynqmp_pm_invoke_fn(TF_A_PM_REGISTER_SGI, sgi_num, reset, 0, 0,
NULL);
if (!ret)
return ret;
/* try old implementation as fallback strategy if above fails */
return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_REGISTER_SGI, sgi_num,
reset, NULL);
}
/**
* zynqmp_pm_get_api_version() - Get version number of PMU PM firmware
* @version: Returned version value
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_get_api_version(u32 *version)
{
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
if (!version)
return -EINVAL;
/* Check is PM API version already verified */
if (pm_api_version > 0) {
*version = pm_api_version;
return 0;
}
ret = zynqmp_pm_invoke_fn(PM_GET_API_VERSION, 0, 0, 0, 0, ret_payload);
*version = ret_payload[1];
return ret;
}
EXPORT_SYMBOL_GPL(zynqmp_pm_get_api_version);
/**
* zynqmp_pm_get_chipid - Get silicon ID registers
* @idcode: IDCODE register
* @version: version register
*
* Return: Returns the status of the operation and the idcode and version
* registers in @idcode and @version.
*/
int zynqmp_pm_get_chipid(u32 *idcode, u32 *version)
{
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
if (!idcode || !version)
return -EINVAL;
ret = zynqmp_pm_invoke_fn(PM_GET_CHIPID, 0, 0, 0, 0, ret_payload);
*idcode = ret_payload[1];
*version = ret_payload[2];
return ret;
}
EXPORT_SYMBOL_GPL(zynqmp_pm_get_chipid);
/**
* zynqmp_pm_get_trustzone_version() - Get secure trustzone firmware version
* @version: Returned version value
*
* Return: Returns status, either success or error+reason
*/
static int zynqmp_pm_get_trustzone_version(u32 *version)
{
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
if (!version)
return -EINVAL;
/* Check is PM trustzone version already verified */
if (pm_tz_version > 0) {
*version = pm_tz_version;
return 0;
}
ret = zynqmp_pm_invoke_fn(PM_GET_TRUSTZONE_VERSION, 0, 0,
0, 0, ret_payload);
*version = ret_payload[1];
return ret;
}
/**
* get_set_conduit_method() - Choose SMC or HVC based communication
* @np: Pointer to the device_node structure
*
* Use SMC or HVC-based functions to communicate with EL2/EL3.
*
* Return: Returns 0 on success or error code
*/
static int get_set_conduit_method(struct device_node *np)
{
const char *method;
if (of_property_read_string(np, "method", &method)) {
pr_warn("%s missing \"method\" property\n", __func__);
return -ENXIO;
}
if (!strcmp("hvc", method)) {
do_fw_call = do_fw_call_hvc;
} else if (!strcmp("smc", method)) {
do_fw_call = do_fw_call_smc;
} else {
pr_warn("%s Invalid \"method\" property: %s\n",
__func__, method);
return -EINVAL;
}
return 0;
}
/**
* zynqmp_pm_query_data() - Get query data from firmware
* @qdata: Variable to the zynqmp_pm_query_data structure
* @out: Returned output value
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_query_data(struct zynqmp_pm_query_data qdata, u32 *out)
{
int ret;
ret = zynqmp_pm_invoke_fn(PM_QUERY_DATA, qdata.qid, qdata.arg1,
qdata.arg2, qdata.arg3, out);
/*
* For clock name query, all bytes in SMC response are clock name
* characters and return code is always success. For invalid clocks,
* clock name bytes would be zeros.
*/
return qdata.qid == PM_QID_CLOCK_GET_NAME ? 0 : ret;
}
EXPORT_SYMBOL_GPL(zynqmp_pm_query_data);
/**
* zynqmp_pm_clock_enable() - Enable the clock for given id
* @clock_id: ID of the clock to be enabled
*
* This function is used by master to enable the clock
* including peripherals and PLL clocks.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_clock_enable(u32 clock_id)
{
return zynqmp_pm_invoke_fn(PM_CLOCK_ENABLE, clock_id, 0, 0, 0, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_clock_enable);
/**
* zynqmp_pm_clock_disable() - Disable the clock for given id
* @clock_id: ID of the clock to be disable
*
* This function is used by master to disable the clock
* including peripherals and PLL clocks.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_clock_disable(u32 clock_id)
{
return zynqmp_pm_invoke_fn(PM_CLOCK_DISABLE, clock_id, 0, 0, 0, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_clock_disable);
/**
* zynqmp_pm_clock_getstate() - Get the clock state for given id
* @clock_id: ID of the clock to be queried
* @state: 1/0 (Enabled/Disabled)
*
* This function is used by master to get the state of clock
* including peripherals and PLL clocks.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_clock_getstate(u32 clock_id, u32 *state)
{
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETSTATE, clock_id, 0,
0, 0, ret_payload);
*state = ret_payload[1];
return ret;
}
EXPORT_SYMBOL_GPL(zynqmp_pm_clock_getstate);
/**
* zynqmp_pm_clock_setdivider() - Set the clock divider for given id
* @clock_id: ID of the clock
* @divider: divider value
*
* This function is used by master to set divider for any clock
* to achieve desired rate.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_clock_setdivider(u32 clock_id, u32 divider)
{
return zynqmp_pm_invoke_fn(PM_CLOCK_SETDIVIDER, clock_id, divider,
0, 0, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_clock_setdivider);
/**
* zynqmp_pm_clock_getdivider() - Get the clock divider for given id
* @clock_id: ID of the clock
* @divider: divider value
*
* This function is used by master to get divider values
* for any clock.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_clock_getdivider(u32 clock_id, u32 *divider)
{
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETDIVIDER, clock_id, 0,
0, 0, ret_payload);
*divider = ret_payload[1];
return ret;
}
EXPORT_SYMBOL_GPL(zynqmp_pm_clock_getdivider);
/**
* zynqmp_pm_clock_setrate() - Set the clock rate for given id
* @clock_id: ID of the clock
* @rate: rate value in hz
*
* This function is used by master to set rate for any clock.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_clock_setrate(u32 clock_id, u64 rate)
{
return zynqmp_pm_invoke_fn(PM_CLOCK_SETRATE, clock_id,
lower_32_bits(rate),
upper_32_bits(rate),
0, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_clock_setrate);
/**
* zynqmp_pm_clock_getrate() - Get the clock rate for given id
* @clock_id: ID of the clock
* @rate: rate value in hz
*
* This function is used by master to get rate
* for any clock.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_clock_getrate(u32 clock_id, u64 *rate)
{
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETRATE, clock_id, 0,
0, 0, ret_payload);
*rate = ((u64)ret_payload[2] << 32) | ret_payload[1];
return ret;
}
EXPORT_SYMBOL_GPL(zynqmp_pm_clock_getrate);
/**
* zynqmp_pm_clock_setparent() - Set the clock parent for given id
* @clock_id: ID of the clock
* @parent_id: parent id
*
* This function is used by master to set parent for any clock.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_clock_setparent(u32 clock_id, u32 parent_id)
{
return zynqmp_pm_invoke_fn(PM_CLOCK_SETPARENT, clock_id,
parent_id, 0, 0, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_clock_setparent);
/**
* zynqmp_pm_clock_getparent() - Get the clock parent for given id
* @clock_id: ID of the clock
* @parent_id: parent id
*
* This function is used by master to get parent index
* for any clock.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_clock_getparent(u32 clock_id, u32 *parent_id)
{
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETPARENT, clock_id, 0,
0, 0, ret_payload);
*parent_id = ret_payload[1];
return ret;
}
EXPORT_SYMBOL_GPL(zynqmp_pm_clock_getparent);
/**
* zynqmp_pm_set_pll_frac_mode() - PM API for set PLL mode
*
* @clk_id: PLL clock ID
* @mode: PLL mode (PLL_MODE_FRAC/PLL_MODE_INT)
*
* This function sets PLL mode
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_set_pll_frac_mode(u32 clk_id, u32 mode)
{
return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_SET_PLL_FRAC_MODE,
clk_id, mode, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_set_pll_frac_mode);
/**
* zynqmp_pm_get_pll_frac_mode() - PM API for get PLL mode
*
* @clk_id: PLL clock ID
* @mode: PLL mode
*
* This function return current PLL mode
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_get_pll_frac_mode(u32 clk_id, u32 *mode)
{
return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_GET_PLL_FRAC_MODE,
clk_id, 0, mode);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_get_pll_frac_mode);
/**
* zynqmp_pm_set_pll_frac_data() - PM API for setting pll fraction data
*
* @clk_id: PLL clock ID
* @data: fraction data
*
* This function sets fraction data.
* It is valid for fraction mode only.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_set_pll_frac_data(u32 clk_id, u32 data)
{
return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_SET_PLL_FRAC_DATA,
clk_id, data, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_set_pll_frac_data);
/**
* zynqmp_pm_get_pll_frac_data() - PM API for getting pll fraction data
*
* @clk_id: PLL clock ID
* @data: fraction data
*
* This function returns fraction data value.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_get_pll_frac_data(u32 clk_id, u32 *data)
{
return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_GET_PLL_FRAC_DATA,
clk_id, 0, data);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_get_pll_frac_data);
/**
* zynqmp_pm_set_sd_tapdelay() - Set tap delay for the SD device
*
* @node_id: Node ID of the device
* @type: Type of tap delay to set (input/output)
* @value: Value to set fot the tap delay
*
* This function sets input/output tap delay for the SD device.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_set_sd_tapdelay(u32 node_id, u32 type, u32 value)
{
return zynqmp_pm_invoke_fn(PM_IOCTL, node_id, IOCTL_SET_SD_TAPDELAY,
type, value, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_set_sd_tapdelay);
/**
* zynqmp_pm_sd_dll_reset() - Reset DLL logic
*
* @node_id: Node ID of the device
* @type: Reset type
*
* This function resets DLL logic for the SD device.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_sd_dll_reset(u32 node_id, u32 type)
{
return zynqmp_pm_invoke_fn(PM_IOCTL, node_id, IOCTL_SD_DLL_RESET,
type, 0, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_sd_dll_reset);
/**
* zynqmp_pm_ospi_mux_select() - OSPI Mux selection
*
* @dev_id: Device Id of the OSPI device.
* @select: OSPI Mux select value.
*
* This function select the OSPI Mux.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_ospi_mux_select(u32 dev_id, u32 select)
{
return zynqmp_pm_invoke_fn(PM_IOCTL, dev_id, IOCTL_OSPI_MUX_SELECT,
select, 0, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_ospi_mux_select);
/**
* zynqmp_pm_write_ggs() - PM API for writing global general storage (ggs)
* @index: GGS register index
* @value: Register value to be written
*
* This function writes value to GGS register.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_write_ggs(u32 index, u32 value)
{
return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_WRITE_GGS,
index, value, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_write_ggs);
/**
* zynqmp_pm_read_ggs() - PM API for reading global general storage (ggs)
* @index: GGS register index
* @value: Register value to be written
*
* This function returns GGS register value.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_read_ggs(u32 index, u32 *value)
{
return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_READ_GGS,
index, 0, value);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_read_ggs);
/**
* zynqmp_pm_write_pggs() - PM API for writing persistent global general
* storage (pggs)
* @index: PGGS register index
* @value: Register value to be written
*
* This function writes value to PGGS register.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_write_pggs(u32 index, u32 value)
{
return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_WRITE_PGGS, index, value,
NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_write_pggs);
/**
* zynqmp_pm_read_pggs() - PM API for reading persistent global general
* storage (pggs)
* @index: PGGS register index
* @value: Register value to be written
*
* This function returns PGGS register value.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_read_pggs(u32 index, u32 *value)
{
return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_READ_PGGS, index, 0,
value);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_read_pggs);
/**
* zynqmp_pm_set_boot_health_status() - PM API for setting healthy boot status
* @value: Status value to be written
*
* This function sets healthy bit value to indicate boot health status
* to firmware.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_set_boot_health_status(u32 value)
{
return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_SET_BOOT_HEALTH_STATUS,
value, 0, NULL);
}
/**
* zynqmp_pm_reset_assert - Request setting of reset (1 - assert, 0 - release)
* @reset: Reset to be configured
* @assert_flag: Flag stating should reset be asserted (1) or
* released (0)
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_reset_assert(const enum zynqmp_pm_reset reset,
const enum zynqmp_pm_reset_action assert_flag)
{
return zynqmp_pm_invoke_fn(PM_RESET_ASSERT, reset, assert_flag,
0, 0, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_reset_assert);
/**
* zynqmp_pm_reset_get_status - Get status of the reset
* @reset: Reset whose status should be returned
* @status: Returned status
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_reset_get_status(const enum zynqmp_pm_reset reset, u32 *status)
{
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
if (!status)
return -EINVAL;
ret = zynqmp_pm_invoke_fn(PM_RESET_GET_STATUS, reset, 0,
0, 0, ret_payload);
*status = ret_payload[1];
return ret;
}
EXPORT_SYMBOL_GPL(zynqmp_pm_reset_get_status);
/**
* zynqmp_pm_fpga_load - Perform the fpga load
* @address: Address to write to
* @size: pl bitstream size
* @flags: Bitstream type
* -XILINX_ZYNQMP_PM_FPGA_FULL: FPGA full reconfiguration
* -XILINX_ZYNQMP_PM_FPGA_PARTIAL: FPGA partial reconfiguration
*
* This function provides access to pmufw. To transfer
* the required bitstream into PL.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_fpga_load(const u64 address, const u32 size, const u32 flags)
{
return zynqmp_pm_invoke_fn(PM_FPGA_LOAD, lower_32_bits(address),
upper_32_bits(address), size, flags, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_fpga_load);
/**
* zynqmp_pm_fpga_get_status - Read value from PCAP status register
* @value: Value to read
*
* This function provides access to the pmufw to get the PCAP
* status
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_fpga_get_status(u32 *value)
{
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
if (!value)
return -EINVAL;
ret = zynqmp_pm_invoke_fn(PM_FPGA_GET_STATUS, 0, 0, 0, 0, ret_payload);
*value = ret_payload[1];
return ret;
}
EXPORT_SYMBOL_GPL(zynqmp_pm_fpga_get_status);
/**
* zynqmp_pm_pinctrl_request - Request Pin from firmware
* @pin: Pin number to request
*
* This function requests pin from firmware.
*
* Return: Returns status, either success or error+reason.
*/
int zynqmp_pm_pinctrl_request(const u32 pin)
{
return zynqmp_pm_invoke_fn(PM_PINCTRL_REQUEST, pin, 0, 0, 0, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_request);
/**
* zynqmp_pm_pinctrl_release - Inform firmware that Pin control is released
* @pin: Pin number to release
*
* This function release pin from firmware.
*
* Return: Returns status, either success or error+reason.
*/
int zynqmp_pm_pinctrl_release(const u32 pin)
{
return zynqmp_pm_invoke_fn(PM_PINCTRL_RELEASE, pin, 0, 0, 0, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_release);
/**
* zynqmp_pm_pinctrl_get_function - Read function id set for the given pin
* @pin: Pin number
* @id: Buffer to store function ID
*
* This function provides the function currently set for the given pin.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_pinctrl_get_function(const u32 pin, u32 *id)
{
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
if (!id)
return -EINVAL;
ret = zynqmp_pm_invoke_fn(PM_PINCTRL_GET_FUNCTION, pin, 0,
0, 0, ret_payload);
*id = ret_payload[1];
return ret;
}
EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_get_function);
/**
* zynqmp_pm_pinctrl_set_function - Set requested function for the pin
* @pin: Pin number
* @id: Function ID to set
*
* This function sets requested function for the given pin.
*
* Return: Returns status, either success or error+reason.
*/
int zynqmp_pm_pinctrl_set_function(const u32 pin, const u32 id)
{
return zynqmp_pm_invoke_fn(PM_PINCTRL_SET_FUNCTION, pin, id,
0, 0, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_set_function);
/**
* zynqmp_pm_pinctrl_get_config - Get configuration parameter for the pin
* @pin: Pin number
* @param: Parameter to get
* @value: Buffer to store parameter value
*
* This function gets requested configuration parameter for the given pin.
*
* Return: Returns status, either success or error+reason.
*/
int zynqmp_pm_pinctrl_get_config(const u32 pin, const u32 param,
u32 *value)
{
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
if (!value)
return -EINVAL;
ret = zynqmp_pm_invoke_fn(PM_PINCTRL_CONFIG_PARAM_GET, pin, param,
0, 0, ret_payload);
*value = ret_payload[1];
return ret;
}
EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_get_config);
/**
* zynqmp_pm_pinctrl_set_config - Set configuration parameter for the pin
* @pin: Pin number
* @param: Parameter to set
* @value: Parameter value to set
*
* This function sets requested configuration parameter for the given pin.
*
* Return: Returns status, either success or error+reason.
*/
int zynqmp_pm_pinctrl_set_config(const u32 pin, const u32 param,
u32 value)
{
return zynqmp_pm_invoke_fn(PM_PINCTRL_CONFIG_PARAM_SET, pin,
param, value, 0, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_set_config);
/**
* zynqmp_pm_bootmode_read() - PM Config API for read bootpin status
* @ps_mode: Returned output value of ps_mode
*
* This API function is to be used for notify the power management controller
* to read bootpin status.
*
* Return: status, either success or error+reason
*/
unsigned int zynqmp_pm_bootmode_read(u32 *ps_mode)
{
unsigned int ret;
u32 ret_payload[PAYLOAD_ARG_CNT];
ret = zynqmp_pm_invoke_fn(PM_MMIO_READ, CRL_APB_BOOT_PIN_CTRL, 0,
0, 0, ret_payload);
*ps_mode = ret_payload[1];
return ret;
}
EXPORT_SYMBOL_GPL(zynqmp_pm_bootmode_read);
/**
* zynqmp_pm_bootmode_write() - PM Config API for Configure bootpin
* @ps_mode: Value to be written to the bootpin ctrl register
*
* This API function is to be used for notify the power management controller
* to configure bootpin.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_bootmode_write(u32 ps_mode)
{
return zynqmp_pm_invoke_fn(PM_MMIO_WRITE, CRL_APB_BOOT_PIN_CTRL,
CRL_APB_BOOTPIN_CTRL_MASK, ps_mode, 0, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_bootmode_write);
/**
* zynqmp_pm_init_finalize() - PM call to inform firmware that the caller
* master has initialized its own power management
*
* Return: Returns status, either success or error+reason
*
* This API function is to be used for notify the power management controller
* about the completed power management initialization.
*/
int zynqmp_pm_init_finalize(void)
{
return zynqmp_pm_invoke_fn(PM_PM_INIT_FINALIZE, 0, 0, 0, 0, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_init_finalize);
/**
* zynqmp_pm_set_suspend_mode() - Set system suspend mode
* @mode: Mode to set for system suspend
*
* This API function is used to set mode of system suspend.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_set_suspend_mode(u32 mode)
{
return zynqmp_pm_invoke_fn(PM_SET_SUSPEND_MODE, mode, 0, 0, 0, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_set_suspend_mode);
/**
* zynqmp_pm_request_node() - Request a node with specific capabilities
* @node: Node ID of the slave
* @capabilities: Requested capabilities of the slave
* @qos: Quality of service (not supported)
* @ack: Flag to specify whether acknowledge is requested
*
* This function is used by master to request particular node from firmware.
* Every master must request node before using it.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_request_node(const u32 node, const u32 capabilities,
const u32 qos, const enum zynqmp_pm_request_ack ack)
{
return zynqmp_pm_invoke_fn(PM_REQUEST_NODE, node, capabilities,
qos, ack, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_request_node);
/**
* zynqmp_pm_release_node() - Release a node
* @node: Node ID of the slave
*
* This function is used by master to inform firmware that master
* has released node. Once released, master must not use that node
* without re-request.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_release_node(const u32 node)
{
return zynqmp_pm_invoke_fn(PM_RELEASE_NODE, node, 0, 0, 0, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_release_node);
/**
* zynqmp_pm_set_requirement() - PM call to set requirement for PM slaves
* @node: Node ID of the slave
* @capabilities: Requested capabilities of the slave
* @qos: Quality of service (not supported)
* @ack: Flag to specify whether acknowledge is requested
*
* This API function is to be used for slaves a PU already has requested
* to change its capabilities.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_set_requirement(const u32 node, const u32 capabilities,
const u32 qos,
const enum zynqmp_pm_request_ack ack)
{
return zynqmp_pm_invoke_fn(PM_SET_REQUIREMENT, node, capabilities,
qos, ack, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_set_requirement);
/**
* zynqmp_pm_load_pdi - Load and process PDI
* @src: Source device where PDI is located
* @address: PDI src address
*
* This function provides support to load PDI from linux
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_load_pdi(const u32 src, const u64 address)
{
return zynqmp_pm_invoke_fn(PM_LOAD_PDI, src,
lower_32_bits(address),
upper_32_bits(address), 0, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_load_pdi);
/**
* zynqmp_pm_aes_engine - Access AES hardware to encrypt/decrypt the data using
* AES-GCM core.
* @address: Address of the AesParams structure.
* @out: Returned output value
*
* Return: Returns status, either success or error code.
*/
int zynqmp_pm_aes_engine(const u64 address, u32 *out)
{
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
if (!out)
return -EINVAL;
ret = zynqmp_pm_invoke_fn(PM_SECURE_AES, upper_32_bits(address),
lower_32_bits(address),
0, 0, ret_payload);
*out = ret_payload[1];
return ret;
}
EXPORT_SYMBOL_GPL(zynqmp_pm_aes_engine);
/**
* zynqmp_pm_sha_hash - Access the SHA engine to calculate the hash
* @address: Address of the data/ Address of output buffer where
* hash should be stored.
* @size: Size of the data.
* @flags:
* BIT(0) - for initializing csudma driver and SHA3(Here address
* and size inputs can be NULL).
* BIT(1) - to call Sha3_Update API which can be called multiple
* times when data is not contiguous.
* BIT(2) - to get final hash of the whole updated data.
* Hash will be overwritten at provided address with
* 48 bytes.
*
* Return: Returns status, either success or error code.
*/
int zynqmp_pm_sha_hash(const u64 address, const u32 size, const u32 flags)
{
u32 lower_addr = lower_32_bits(address);
u32 upper_addr = upper_32_bits(address);
return zynqmp_pm_invoke_fn(PM_SECURE_SHA, upper_addr, lower_addr,
size, flags, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_sha_hash);
/**
* zynqmp_pm_register_notifier() - PM API for register a subsystem
* to be notified about specific
* event/error.
* @node: Node ID to which the event is related.
* @event: Event Mask of Error events for which wants to get notified.
* @wake: Wake subsystem upon capturing the event if value 1
* @enable: Enable the registration for value 1, disable for value 0
*
* This function is used to register/un-register for particular node-event
* combination in firmware.
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_register_notifier(const u32 node, const u32 event,
const u32 wake, const u32 enable)
{
return zynqmp_pm_invoke_fn(PM_REGISTER_NOTIFIER, node, event,
wake, enable, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_register_notifier);
/**
* zynqmp_pm_system_shutdown - PM call to request a system shutdown or restart
* @type: Shutdown or restart? 0 for shutdown, 1 for restart
* @subtype: Specifies which system should be restarted or shut down
*
* Return: Returns status, either success or error+reason
*/
int zynqmp_pm_system_shutdown(const u32 type, const u32 subtype)
{
return zynqmp_pm_invoke_fn(PM_SYSTEM_SHUTDOWN, type, subtype,
0, 0, NULL);
}
/**
* zynqmp_pm_set_feature_config - PM call to request IOCTL for feature config
* @id: The config ID of the feature to be configured
* @value: The config value of the feature to be configured
*
* Return: Returns 0 on success or error value on failure.
*/
int zynqmp_pm_set_feature_config(enum pm_feature_config_id id, u32 value)
{
return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_SET_FEATURE_CONFIG,
id, value, NULL);
}
/**
* zynqmp_pm_get_feature_config - PM call to get value of configured feature
* @id: The config id of the feature to be queried
* @payload: Returned value array
*
* Return: Returns 0 on success or error value on failure.
*/
int zynqmp_pm_get_feature_config(enum pm_feature_config_id id,
u32 *payload)
{
return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_GET_FEATURE_CONFIG,
id, 0, payload);
}
/**
* struct zynqmp_pm_shutdown_scope - Struct for shutdown scope
* @subtype: Shutdown subtype
* @name: Matching string for scope argument
*
* This struct encapsulates mapping between shutdown scope ID and string.
*/
struct zynqmp_pm_shutdown_scope {
const enum zynqmp_pm_shutdown_subtype subtype;
const char *name;
};
static struct zynqmp_pm_shutdown_scope shutdown_scopes[] = {
[ZYNQMP_PM_SHUTDOWN_SUBTYPE_SUBSYSTEM] = {
.subtype = ZYNQMP_PM_SHUTDOWN_SUBTYPE_SUBSYSTEM,
.name = "subsystem",
},
[ZYNQMP_PM_SHUTDOWN_SUBTYPE_PS_ONLY] = {
.subtype = ZYNQMP_PM_SHUTDOWN_SUBTYPE_PS_ONLY,
.name = "ps_only",
},
[ZYNQMP_PM_SHUTDOWN_SUBTYPE_SYSTEM] = {
.subtype = ZYNQMP_PM_SHUTDOWN_SUBTYPE_SYSTEM,
.name = "system",
},
};
static struct zynqmp_pm_shutdown_scope *selected_scope =
&shutdown_scopes[ZYNQMP_PM_SHUTDOWN_SUBTYPE_SYSTEM];
/**
* zynqmp_pm_is_shutdown_scope_valid - Check if shutdown scope string is valid
* @scope_string: Shutdown scope string
*
* Return: Return pointer to matching shutdown scope struct from
* array of available options in system if string is valid,
* otherwise returns NULL.
*/
static struct zynqmp_pm_shutdown_scope*
zynqmp_pm_is_shutdown_scope_valid(const char *scope_string)
{
int count;
for (count = 0; count < ARRAY_SIZE(shutdown_scopes); count++)
if (sysfs_streq(scope_string, shutdown_scopes[count].name))
return &shutdown_scopes[count];
return NULL;
}
static ssize_t shutdown_scope_show(struct device *device,
struct device_attribute *attr,
char *buf)
{
int i;
for (i = 0; i < ARRAY_SIZE(shutdown_scopes); i++) {
if (&shutdown_scopes[i] == selected_scope) {
strcat(buf, "[");
strcat(buf, shutdown_scopes[i].name);
strcat(buf, "]");
} else {
strcat(buf, shutdown_scopes[i].name);
}
strcat(buf, " ");
}
strcat(buf, "\n");
return strlen(buf);
}
static ssize_t shutdown_scope_store(struct device *device,
struct device_attribute *attr,
const char *buf, size_t count)
{
int ret;
struct zynqmp_pm_shutdown_scope *scope;
scope = zynqmp_pm_is_shutdown_scope_valid(buf);
if (!scope)
return -EINVAL;
ret = zynqmp_pm_system_shutdown(ZYNQMP_PM_SHUTDOWN_TYPE_SETSCOPE_ONLY,
scope->subtype);
if (ret) {
pr_err("unable to set shutdown scope %s\n", buf);
return ret;
}
selected_scope = scope;
return count;
}
static DEVICE_ATTR_RW(shutdown_scope);
static ssize_t health_status_store(struct device *device,
struct device_attribute *attr,
const char *buf, size_t count)
{
int ret;
unsigned int value;
ret = kstrtouint(buf, 10, &value);
if (ret)
return ret;
ret = zynqmp_pm_set_boot_health_status(value);
if (ret) {
dev_err(device, "unable to set healthy bit value to %u\n",
value);
return ret;
}
return count;
}
static DEVICE_ATTR_WO(health_status);
static ssize_t ggs_show(struct device *device,
struct device_attribute *attr,
char *buf,
u32 reg)
{
int ret;
u32 ret_payload[PAYLOAD_ARG_CNT];
ret = zynqmp_pm_read_ggs(reg, ret_payload);
if (ret)
return ret;
return sprintf(buf, "0x%x\n", ret_payload[1]);
}
static ssize_t ggs_store(struct device *device,
struct device_attribute *attr,
const char *buf, size_t count,
u32 reg)
{
long value;
int ret;
if (reg >= GSS_NUM_REGS)
return -EINVAL;
ret = kstrtol(buf, 16, &value);
if (ret) {
count = -EFAULT;
goto err;
}
ret = zynqmp_pm_write_ggs(reg, value);
if (ret)
count = -EFAULT;
err:
return count;
}
/* GGS register show functions */
#define GGS0_SHOW(N) \
ssize_t ggs##N##_show(struct device *device, \
struct device_attribute *attr, \
char *buf) \
{ \
return ggs_show(device, attr, buf, N); \
}
static GGS0_SHOW(0);
static GGS0_SHOW(1);
static GGS0_SHOW(2);
static GGS0_SHOW(3);
/* GGS register store function */
#define GGS0_STORE(N) \
ssize_t ggs##N##_store(struct device *device, \
struct device_attribute *attr, \
const char *buf, \
size_t count) \
{ \
return ggs_store(device, attr, buf, count, N); \
}
static GGS0_STORE(0);
static GGS0_STORE(1);
static GGS0_STORE(2);
static GGS0_STORE(3);
static ssize_t pggs_show(struct device *device,
struct device_attribute *attr,
char *buf,
u32 reg)
{
int ret;
u32 ret_payload[PAYLOAD_ARG_CNT];
ret = zynqmp_pm_read_pggs(reg, ret_payload);
if (ret)
return ret;
return sprintf(buf, "0x%x\n", ret_payload[1]);
}
static ssize_t pggs_store(struct device *device,
struct device_attribute *attr,
const char *buf, size_t count,
u32 reg)
{
long value;
int ret;
if (reg >= GSS_NUM_REGS)
return -EINVAL;
ret = kstrtol(buf, 16, &value);
if (ret) {
count = -EFAULT;
goto err;
}
ret = zynqmp_pm_write_pggs(reg, value);
if (ret)
count = -EFAULT;
err:
return count;
}
#define PGGS0_SHOW(N) \
ssize_t pggs##N##_show(struct device *device, \
struct device_attribute *attr, \
char *buf) \
{ \
return pggs_show(device, attr, buf, N); \
}
#define PGGS0_STORE(N) \
ssize_t pggs##N##_store(struct device *device, \
struct device_attribute *attr, \
const char *buf, \
size_t count) \
{ \
return pggs_store(device, attr, buf, count, N); \
}
/* PGGS register show functions */
static PGGS0_SHOW(0);
static PGGS0_SHOW(1);
static PGGS0_SHOW(2);
static PGGS0_SHOW(3);
/* PGGS register store functions */
static PGGS0_STORE(0);
static PGGS0_STORE(1);
static PGGS0_STORE(2);
static PGGS0_STORE(3);
/* GGS register attributes */
static DEVICE_ATTR_RW(ggs0);
static DEVICE_ATTR_RW(ggs1);
static DEVICE_ATTR_RW(ggs2);
static DEVICE_ATTR_RW(ggs3);
/* PGGS register attributes */
static DEVICE_ATTR_RW(pggs0);
static DEVICE_ATTR_RW(pggs1);
static DEVICE_ATTR_RW(pggs2);
static DEVICE_ATTR_RW(pggs3);
static ssize_t feature_config_id_show(struct device *device,
struct device_attribute *attr,
char *buf)
{
struct zynqmp_devinfo *devinfo = dev_get_drvdata(device);
return sysfs_emit(buf, "%d\n", devinfo->feature_conf_id);
}
static ssize_t feature_config_id_store(struct device *device,
struct device_attribute *attr,
const char *buf, size_t count)
{
u32 config_id;
int ret;
struct zynqmp_devinfo *devinfo = dev_get_drvdata(device);
if (!buf)
return -EINVAL;
ret = kstrtou32(buf, 10, &config_id);
if (ret)
return ret;
devinfo->feature_conf_id = config_id;
return count;
}
static DEVICE_ATTR_RW(feature_config_id);
static ssize_t feature_config_value_show(struct device *device,
struct device_attribute *attr,
char *buf)
{
int ret;
u32 ret_payload[PAYLOAD_ARG_CNT];
struct zynqmp_devinfo *devinfo = dev_get_drvdata(device);
ret = zynqmp_pm_get_feature_config(devinfo->feature_conf_id,
ret_payload);
if (ret)
return ret;
return sysfs_emit(buf, "%d\n", ret_payload[1]);
}
static ssize_t feature_config_value_store(struct device *device,
struct device_attribute *attr,
const char *buf, size_t count)
{
u32 value;
int ret;
struct zynqmp_devinfo *devinfo = dev_get_drvdata(device);
if (!buf)
return -EINVAL;
ret = kstrtou32(buf, 10, &value);
if (ret)
return ret;
ret = zynqmp_pm_set_feature_config(devinfo->feature_conf_id,
value);
if (ret)
return ret;
return count;
}
static DEVICE_ATTR_RW(feature_config_value);
static struct attribute *zynqmp_firmware_attrs[] = {
&dev_attr_ggs0.attr,
&dev_attr_ggs1.attr,
&dev_attr_ggs2.attr,
&dev_attr_ggs3.attr,
&dev_attr_pggs0.attr,
&dev_attr_pggs1.attr,
&dev_attr_pggs2.attr,
&dev_attr_pggs3.attr,
&dev_attr_shutdown_scope.attr,
&dev_attr_health_status.attr,
&dev_attr_feature_config_id.attr,
&dev_attr_feature_config_value.attr,
NULL,
};
ATTRIBUTE_GROUPS(zynqmp_firmware);
static int zynqmp_firmware_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np;
struct zynqmp_devinfo *devinfo;
int ret;
ret = get_set_conduit_method(dev->of_node);
if (ret)
return ret;
np = of_find_compatible_node(NULL, NULL, "xlnx,zynqmp");
if (!np) {
np = of_find_compatible_node(NULL, NULL, "xlnx,versal");
if (!np)
return 0;
feature_check_enabled = true;
}
if (!feature_check_enabled) {
ret = do_feature_check_call(PM_FEATURE_CHECK);
if (ret >= 0)
feature_check_enabled = true;
}
of_node_put(np);
devinfo = devm_kzalloc(dev, sizeof(*devinfo), GFP_KERNEL);
if (!devinfo)
return -ENOMEM;
devinfo->dev = dev;
platform_set_drvdata(pdev, devinfo);
/* Check PM API version number */
ret = zynqmp_pm_get_api_version(&pm_api_version);
if (ret)
return ret;
if (pm_api_version < ZYNQMP_PM_VERSION) {
panic("%s Platform Management API version error. Expected: v%d.%d - Found: v%d.%d\n",
__func__,
ZYNQMP_PM_VERSION_MAJOR, ZYNQMP_PM_VERSION_MINOR,
pm_api_version >> 16, pm_api_version & 0xFFFF);
}
pr_info("%s Platform Management API v%d.%d\n", __func__,
pm_api_version >> 16, pm_api_version & 0xFFFF);
/* Check trustzone version number */
ret = zynqmp_pm_get_trustzone_version(&pm_tz_version);
if (ret)
panic("Legacy trustzone found without version support\n");
if (pm_tz_version < ZYNQMP_TZ_VERSION)
panic("%s Trustzone version error. Expected: v%d.%d - Found: v%d.%d\n",
__func__,
ZYNQMP_TZ_VERSION_MAJOR, ZYNQMP_TZ_VERSION_MINOR,
pm_tz_version >> 16, pm_tz_version & 0xFFFF);
pr_info("%s Trustzone version v%d.%d\n", __func__,
pm_tz_version >> 16, pm_tz_version & 0xFFFF);
ret = mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE, firmware_devs,
ARRAY_SIZE(firmware_devs), NULL, 0, NULL);
if (ret) {
dev_err(&pdev->dev, "failed to add MFD devices %d\n", ret);
return ret;
}
zynqmp_pm_api_debugfs_init();
np = of_find_compatible_node(NULL, NULL, "xlnx,versal");
if (np) {
em_dev = platform_device_register_data(&pdev->dev, "xlnx_event_manager",
-1, NULL, 0);
if (IS_ERR(em_dev))
dev_err_probe(&pdev->dev, PTR_ERR(em_dev), "EM register fail with error\n");
}
of_node_put(np);
return of_platform_populate(dev->of_node, NULL, NULL, dev);
}
static int zynqmp_firmware_remove(struct platform_device *pdev)
{
struct pm_api_feature_data *feature_data;
struct hlist_node *tmp;
int i;
mfd_remove_devices(&pdev->dev);
zynqmp_pm_api_debugfs_exit();
hash_for_each_safe(pm_api_features_map, i, tmp, feature_data, hentry) {
hash_del(&feature_data->hentry);
kfree(feature_data);
}
platform_device_unregister(em_dev);
return 0;
}
static const struct of_device_id zynqmp_firmware_of_match[] = {
{.compatible = "xlnx,zynqmp-firmware"},
{.compatible = "xlnx,versal-firmware"},
{},
};
MODULE_DEVICE_TABLE(of, zynqmp_firmware_of_match);
static struct platform_driver zynqmp_firmware_driver = {
.driver = {
.name = "zynqmp_firmware",
.of_match_table = zynqmp_firmware_of_match,
.dev_groups = zynqmp_firmware_groups,
},
.probe = zynqmp_firmware_probe,
.remove = zynqmp_firmware_remove,
};
module_platform_driver(zynqmp_firmware_driver);