drivers/i2c/busses/i2c-cp2615.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * i2c support for Silicon Labs' CP2615 Digital Audio Bridge
  *
  * (c) 2021, Bence Csókás <bence98@sch.bme.hu>
  */

 #include <linux/errno.h>
 #include <linux/i2c.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/string.h>
 #include <linux/usb.h>

 /** CP2615 I/O Protocol implementation */

 #define CP2615_VID 0x10c4
 #define CP2615_PID 0xeac1

 #define IOP_EP_IN  0x82
 #define IOP_EP_OUT 0x02
 #define IOP_IFN 1
 #define IOP_ALTSETTING 2

 #define MAX_IOP_SIZE 64
 #define MAX_IOP_PAYLOAD_SIZE (MAX_IOP_SIZE - 6)
 #define MAX_I2C_SIZE (MAX_IOP_PAYLOAD_SIZE - 4)

 enum cp2615_iop_msg_type {
 	iop_GetAccessoryInfo = 0xD100,
 	iop_AccessoryInfo = 0xA100,
 	iop_GetPortConfiguration = 0xD203,
 	iop_PortConfiguration = 0xA203,
 	iop_DoI2cTransfer = 0xD400,
 	iop_I2cTransferResult = 0xA400,
 	iop_GetSerialState = 0xD501,
 	iop_SerialState = 0xA501
 };

 struct __packed cp2615_iop_msg {
 	__be16 preamble, length, msg;
 	u8 data[MAX_IOP_PAYLOAD_SIZE];
 };

 #define PART_ID_A01 0x1400
 #define PART_ID_A02 0x1500

 struct __packed cp2615_iop_accessory_info {
 	__be16 part_id, option_id, proto_ver;
 };

 struct __packed cp2615_i2c_transfer {
 	u8 tag, i2caddr, read_len, write_len;
 	u8 data[MAX_I2C_SIZE];
 };

 /* Possible values for struct cp2615_i2c_transfer_result.status */
 enum cp2615_i2c_status {
 	/* Writing to the internal EEPROM failed, because it is locked */
 	CP2615_CFG_LOCKED = -6,
 	/* read_len or write_len out of range */
 	CP2615_INVALID_PARAM = -4,
 	/* I2C slave did not ACK in time */
 	CP2615_TIMEOUT,
 	/* I2C bus busy */
 	CP2615_BUS_BUSY,
 	/* I2C bus error (ie. device NAK'd the request) */
 	CP2615_BUS_ERROR,
 	CP2615_SUCCESS
 };

 struct __packed cp2615_i2c_transfer_result {
 	u8 tag, i2caddr;
 	s8 status;
 	u8 read_len;
 	u8 data[MAX_I2C_SIZE];
 };

 static int cp2615_init_iop_msg(struct cp2615_iop_msg *ret, enum cp2615_iop_msg_type msg,
 			const void *data, size_t data_len)
 {
 	if (data_len > MAX_IOP_PAYLOAD_SIZE)
 		return -EFBIG;

 	if (!ret)
 		return -EINVAL;

 	ret->preamble = 0x2A2A;
 	ret->length = htons(data_len + 6);
 	ret->msg = htons(msg);
 	if (data && data_len)
 		memcpy(&ret->data, data, data_len);
 	return 0;
 }

 static int cp2615_init_i2c_msg(struct cp2615_iop_msg *ret, const struct cp2615_i2c_transfer *data)
 {
 	return cp2615_init_iop_msg(ret, iop_DoI2cTransfer, data, 4 + data->write_len);
 }

 /* Translates status codes to Linux errno's */
 static int cp2615_check_status(enum cp2615_i2c_status status)
 {
 	switch (status) {
 	case CP2615_SUCCESS:
 			return 0;
 	case CP2615_BUS_ERROR:
 		return -ENXIO;
 	case CP2615_BUS_BUSY:
 		return -EAGAIN;
 	case CP2615_TIMEOUT:
 		return -ETIMEDOUT;
 	case CP2615_INVALID_PARAM:
 		return -EINVAL;
 	case CP2615_CFG_LOCKED:
 		return -EPERM;
 	}
 	/* Unknown error code */
 	return -EPROTO;
 }

 /** Driver code */

 static int
 cp2615_i2c_send(struct usb_interface *usbif, struct cp2615_i2c_transfer *i2c_w)
 {
 	struct cp2615_iop_msg *msg = kzalloc(sizeof(*msg), GFP_KERNEL);
 	struct usb_device *usbdev = interface_to_usbdev(usbif);
 	int res = cp2615_init_i2c_msg(msg, i2c_w);

 	if (!res)
 		res = usb_bulk_msg(usbdev, usb_sndbulkpipe(usbdev, IOP_EP_OUT),
 				   msg, ntohs(msg->length), NULL, 0);
 	kfree(msg);
 	return res;
 }

 static int
 cp2615_i2c_recv(struct usb_interface *usbif, unsigned char tag, void *buf)
 {
 	struct usb_device *usbdev = interface_to_usbdev(usbif);
 	struct cp2615_iop_msg *msg;
 	struct cp2615_i2c_transfer_result *i2c_r;
 	int res;

 	msg = kzalloc(sizeof(*msg), GFP_KERNEL);
 	if (!msg)
 		return -ENOMEM;

 	res = usb_bulk_msg(usbdev, usb_rcvbulkpipe(usbdev, IOP_EP_IN), msg,
 			   sizeof(struct cp2615_iop_msg), NULL, 0);
 	if (res < 0) {
 		kfree(msg);
 		return res;
 	}

 	i2c_r = (struct cp2615_i2c_transfer_result *)&msg->data;
 	if (msg->msg != htons(iop_I2cTransferResult) || i2c_r->tag != tag) {
 		kfree(msg);
 		return -EIO;
 	}

 	res = cp2615_check_status(i2c_r->status);
 	if (!res)
 		memcpy(buf, &i2c_r->data, i2c_r->read_len);

 	kfree(msg);
 	return res;
 }

 /* Checks if the IOP is functional by querying the part's ID */
 static int cp2615_check_iop(struct usb_interface *usbif)
 {
 	struct cp2615_iop_msg *msg = kzalloc(sizeof(*msg), GFP_KERNEL);
 	struct cp2615_iop_accessory_info *info = (struct cp2615_iop_accessory_info *)&msg->data;
 	struct usb_device *usbdev = interface_to_usbdev(usbif);
 	int res = cp2615_init_iop_msg(msg, iop_GetAccessoryInfo, NULL, 0);

 	if (res)
 		goto out;

 	res = usb_bulk_msg(usbdev, usb_sndbulkpipe(usbdev, IOP_EP_OUT),
 				   msg, ntohs(msg->length), NULL, 0);
 	if (res)
 		goto out;

 	res = usb_bulk_msg(usbdev, usb_rcvbulkpipe(usbdev, IOP_EP_IN),
 			       msg, sizeof(struct cp2615_iop_msg), NULL, 0);
 	if (res)
 		goto out;

 	if (msg->msg != htons(iop_AccessoryInfo)) {
 		res = -EIO;
 		goto out;
 	}

 	switch (ntohs(info->part_id)) {
 	case PART_ID_A01:
 		dev_dbg(&usbif->dev, "Found A01 part. (WARNING: errata exists!)\n");
 		break;
 	case PART_ID_A02:
 		dev_dbg(&usbif->dev, "Found good A02 part.\n");
 		break;
 	default:
 		dev_warn(&usbif->dev, "Unknown part ID %04X\n", ntohs(info->part_id));
 	}

 out:
 	kfree(msg);
 	return res;
 }

 static int
 cp2615_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 {
 	struct usb_interface *usbif = adap->algo_data;
 	int i = 0, ret = 0;
 	struct i2c_msg *msg;
 	struct cp2615_i2c_transfer i2c_w = {0};

 	dev_dbg(&usbif->dev, "Doing %d I2C transactions\n", num);

 	for (; !ret && i < num; i++) {
 		msg = &msgs[i];

 		i2c_w.tag = 0xdd;
 		i2c_w.i2caddr = i2c_8bit_addr_from_msg(msg);
 		if (msg->flags & I2C_M_RD) {
 			i2c_w.read_len = msg->len;
 			i2c_w.write_len = 0;
 		} else {
 			i2c_w.read_len = 0;
 			i2c_w.write_len = msg->len;
 			memcpy(&i2c_w.data, msg->buf, i2c_w.write_len);
 		}
 		ret = cp2615_i2c_send(usbif, &i2c_w);
 		if (ret)
 			break;
 		ret = cp2615_i2c_recv(usbif, i2c_w.tag, msg->buf);
 	}
 	if (ret < 0)
 		return ret;
 	return i;
 }

 static u32
 cp2615_i2c_func(struct i2c_adapter *adap)
 {
 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
 }

 static const struct i2c_algorithm cp2615_i2c_algo = {
 	.master_xfer	= cp2615_i2c_master_xfer,
 	.functionality	= cp2615_i2c_func,
 };

 /*
  * This chip has some limitations: one is that the USB endpoint
  * can only receive 64 bytes/transfer, that leaves 54 bytes for
  * the I2C transfer. On top of that, EITHER read_len OR write_len
  * may be zero, but not both. If both are non-zero, the adapter
  * issues a write followed by a read. And the chip does not
  * support repeated START between the write and read phases.
  */
 static struct i2c_adapter_quirks cp2615_i2c_quirks = {
 	.max_write_len = MAX_I2C_SIZE,
 	.max_read_len = MAX_I2C_SIZE,
 	.flags = I2C_AQ_COMB_WRITE_THEN_READ | I2C_AQ_NO_ZERO_LEN | I2C_AQ_NO_REP_START,
 	.max_comb_1st_msg_len = MAX_I2C_SIZE,
 	.max_comb_2nd_msg_len = MAX_I2C_SIZE
 };

 static void
 cp2615_i2c_remove(struct usb_interface *usbif)
 {
 	struct i2c_adapter *adap = usb_get_intfdata(usbif);

 	usb_set_intfdata(usbif, NULL);
 	i2c_del_adapter(adap);
 }

 static int
 cp2615_i2c_probe(struct usb_interface *usbif, const struct usb_device_id *id)
 {
 	int ret = 0;
 	struct i2c_adapter *adap;
 	struct usb_device *usbdev = interface_to_usbdev(usbif);

 	ret = usb_set_interface(usbdev, IOP_IFN, IOP_ALTSETTING);
 	if (ret)
 		return ret;

 	ret = cp2615_check_iop(usbif);
 	if (ret)
 		return ret;

 	adap = devm_kzalloc(&usbif->dev, sizeof(struct i2c_adapter), GFP_KERNEL);
 	if (!adap)
 		return -ENOMEM;

 	strncpy(adap->name, usbdev->serial, sizeof(adap->name) - 1);
 	adap->owner = THIS_MODULE;
 	adap->dev.parent = &usbif->dev;
 	adap->dev.of_node = usbif->dev.of_node;
 	adap->timeout = HZ;
 	adap->algo = &cp2615_i2c_algo;
 	adap->quirks = &cp2615_i2c_quirks;
 	adap->algo_data = usbif;

 	ret = i2c_add_adapter(adap);
 	if (ret)
 		return ret;

 	usb_set_intfdata(usbif, adap);
 	return 0;
 }

 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE_INTERFACE_NUMBER(CP2615_VID, CP2615_PID, IOP_IFN) },
 	{ }
 };

 MODULE_DEVICE_TABLE(usb, id_table);

 static struct usb_driver cp2615_i2c_driver = {
 	.name = "i2c-cp2615",
 	.probe = cp2615_i2c_probe,
 	.disconnect = cp2615_i2c_remove,
 	.id_table = id_table,
 };

 module_usb_driver(cp2615_i2c_driver);

 MODULE_AUTHOR("Bence Csókás <bence98@sch.bme.hu>");
 MODULE_DESCRIPTION("CP2615 I2C bus driver");
 MODULE_LICENSE("GPL");
	// SPDX-License-Identifier: GPL-2.0-or-later
	/*
	* i2c support for Silicon Labs' CP2615 Digital Audio Bridge
	*
	* (c) 2021, Bence Csókás <bence98@sch.bme.hu>
	*/

	#include <linux/errno.h>
	#include <linux/i2c.h>
	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/string.h>
	#include <linux/usb.h>

	/** CP2615 I/O Protocol implementation */

	#define CP2615_VID 0x10c4
	#define CP2615_PID 0xeac1

	#define IOP_EP_IN 0x82
	#define IOP_EP_OUT 0x02
	#define IOP_IFN 1
	#define IOP_ALTSETTING 2

	#define MAX_IOP_SIZE 64
	#define MAX_IOP_PAYLOAD_SIZE (MAX_IOP_SIZE - 6)
	#define MAX_I2C_SIZE (MAX_IOP_PAYLOAD_SIZE - 4)

	enum cp2615_iop_msg_type {
	iop_GetAccessoryInfo = 0xD100,
	iop_AccessoryInfo = 0xA100,
	iop_GetPortConfiguration = 0xD203,
	iop_PortConfiguration = 0xA203,
	iop_DoI2cTransfer = 0xD400,
	iop_I2cTransferResult = 0xA400,
	iop_GetSerialState = 0xD501,
	iop_SerialState = 0xA501
	};

	struct __packed cp2615_iop_msg {
	__be16 preamble, length, msg;
	u8 data[MAX_IOP_PAYLOAD_SIZE];
	};

	#define PART_ID_A01 0x1400
	#define PART_ID_A02 0x1500

	struct __packed cp2615_iop_accessory_info {
	__be16 part_id, option_id, proto_ver;
	};

	struct __packed cp2615_i2c_transfer {
	u8 tag, i2caddr, read_len, write_len;
	u8 data[MAX_I2C_SIZE];
	};

	/* Possible values for struct cp2615_i2c_transfer_result.status */
	enum cp2615_i2c_status {
	/* Writing to the internal EEPROM failed, because it is locked */
	CP2615_CFG_LOCKED = -6,
	/* read_len or write_len out of range */
	CP2615_INVALID_PARAM = -4,
	/* I2C slave did not ACK in time */
	CP2615_TIMEOUT,
	/* I2C bus busy */
	CP2615_BUS_BUSY,
	/* I2C bus error (ie. device NAK'd the request) */
	CP2615_BUS_ERROR,
	CP2615_SUCCESS
	};

	struct __packed cp2615_i2c_transfer_result {
	u8 tag, i2caddr;
	s8 status;
	u8 read_len;
	u8 data[MAX_I2C_SIZE];
	};

	static int cp2615_init_iop_msg(struct cp2615_iop_msg *ret, enum cp2615_iop_msg_type msg,
	const void *data, size_t data_len)
	{
	if (data_len > MAX_IOP_PAYLOAD_SIZE)
	return -EFBIG;

	if (!ret)
	return -EINVAL;

	ret->preamble = 0x2A2A;
	ret->length = htons(data_len + 6);
	ret->msg = htons(msg);
	if (data && data_len)
	memcpy(&ret->data, data, data_len);
	return 0;
	}

	static int cp2615_init_i2c_msg(struct cp2615_iop_msg ret, const struct cp2615_i2c_transfer data)
	{
	return cp2615_init_iop_msg(ret, iop_DoI2cTransfer, data, 4 + data->write_len);
	}

	/* Translates status codes to Linux errno's */
	static int cp2615_check_status(enum cp2615_i2c_status status)
	{
	switch (status) {
	case CP2615_SUCCESS:
	return 0;
	case CP2615_BUS_ERROR:
	return -ENXIO;
	case CP2615_BUS_BUSY:
	return -EAGAIN;
	case CP2615_TIMEOUT:
	return -ETIMEDOUT;
	case CP2615_INVALID_PARAM:
	return -EINVAL;
	case CP2615_CFG_LOCKED:
	return -EPERM;
	}
	/* Unknown error code */
	return -EPROTO;
	}

	/** Driver code */

	static int
	cp2615_i2c_send(struct usb_interface usbif, struct cp2615_i2c_transfer i2c_w)
	{
	struct cp2615_iop_msg msg = kzalloc(sizeof(msg), GFP_KERNEL);
	struct usb_device *usbdev = interface_to_usbdev(usbif);
	int res = cp2615_init_i2c_msg(msg, i2c_w);

	if (!res)
	res = usb_bulk_msg(usbdev, usb_sndbulkpipe(usbdev, IOP_EP_OUT),
	msg, ntohs(msg->length), NULL, 0);
	kfree(msg);
	return res;
	}

	static int
	cp2615_i2c_recv(struct usb_interface usbif, unsigned char tag, void buf)
	{
	struct usb_device *usbdev = interface_to_usbdev(usbif);
	struct cp2615_iop_msg *msg;
	struct cp2615_i2c_transfer_result *i2c_r;
	int res;

	msg = kzalloc(sizeof(*msg), GFP_KERNEL);
	if (!msg)
	return -ENOMEM;

	res = usb_bulk_msg(usbdev, usb_rcvbulkpipe(usbdev, IOP_EP_IN), msg,
	sizeof(struct cp2615_iop_msg), NULL, 0);
	if (res < 0) {
	kfree(msg);
	return res;
	}

	i2c_r = (struct cp2615_i2c_transfer_result *)&msg->data;
	if (msg->msg != htons(iop_I2cTransferResult) \|\| i2c_r->tag != tag) {
	kfree(msg);
	return -EIO;
	}

	res = cp2615_check_status(i2c_r->status);
	if (!res)
	memcpy(buf, &i2c_r->data, i2c_r->read_len);

	kfree(msg);
	return res;
	}

	/* Checks if the IOP is functional by querying the part's ID */
	static int cp2615_check_iop(struct usb_interface *usbif)
	{
	struct cp2615_iop_msg msg = kzalloc(sizeof(msg), GFP_KERNEL);
	struct cp2615_iop_accessory_info info = (struct cp2615_iop_accessory_info )&msg->data;
	struct usb_device *usbdev = interface_to_usbdev(usbif);
	int res = cp2615_init_iop_msg(msg, iop_GetAccessoryInfo, NULL, 0);

	if (res)
	goto out;

	res = usb_bulk_msg(usbdev, usb_sndbulkpipe(usbdev, IOP_EP_OUT),
	msg, ntohs(msg->length), NULL, 0);
	if (res)
	goto out;

	res = usb_bulk_msg(usbdev, usb_rcvbulkpipe(usbdev, IOP_EP_IN),
	msg, sizeof(struct cp2615_iop_msg), NULL, 0);
	if (res)
	goto out;

	if (msg->msg != htons(iop_AccessoryInfo)) {
	res = -EIO;
	goto out;
	}

	switch (ntohs(info->part_id)) {
	case PART_ID_A01:
	dev_dbg(&usbif->dev, "Found A01 part. (WARNING: errata exists!)\n");
	break;
	case PART_ID_A02:
	dev_dbg(&usbif->dev, "Found good A02 part.\n");
	break;
	default:
	dev_warn(&usbif->dev, "Unknown part ID %04X\n", ntohs(info->part_id));
	}

	out:
	kfree(msg);
	return res;
	}

	static int
	cp2615_i2c_master_xfer(struct i2c_adapter adap, struct i2c_msg msgs, int num)
	{
	struct usb_interface *usbif = adap->algo_data;
	int i = 0, ret = 0;
	struct i2c_msg *msg;
	struct cp2615_i2c_transfer i2c_w = {0};

	dev_dbg(&usbif->dev, "Doing %d I2C transactions\n", num);

	for (; !ret && i < num; i++) {
	msg = &msgs[i];

	i2c_w.tag = 0xdd;
	i2c_w.i2caddr = i2c_8bit_addr_from_msg(msg);
	if (msg->flags & I2C_M_RD) {
	i2c_w.read_len = msg->len;
	i2c_w.write_len = 0;
	} else {
	i2c_w.read_len = 0;
	i2c_w.write_len = msg->len;
	memcpy(&i2c_w.data, msg->buf, i2c_w.write_len);
	}
	ret = cp2615_i2c_send(usbif, &i2c_w);
	if (ret)
	break;
	ret = cp2615_i2c_recv(usbif, i2c_w.tag, msg->buf);
	}
	if (ret < 0)
	return ret;
	return i;
	}

	static u32
	cp2615_i2c_func(struct i2c_adapter *adap)
	{
	return I2C_FUNC_I2C \| I2C_FUNC_SMBUS_EMUL;
	}

	static const struct i2c_algorithm cp2615_i2c_algo = {
	.master_xfer = cp2615_i2c_master_xfer,
	.functionality = cp2615_i2c_func,
	};

	/*
	* This chip has some limitations: one is that the USB endpoint
	* can only receive 64 bytes/transfer, that leaves 54 bytes for
	* the I2C transfer. On top of that, EITHER read_len OR write_len
	* may be zero, but not both. If both are non-zero, the adapter
	* issues a write followed by a read. And the chip does not
	* support repeated START between the write and read phases.
	*/
	static struct i2c_adapter_quirks cp2615_i2c_quirks = {
	.max_write_len = MAX_I2C_SIZE,
	.max_read_len = MAX_I2C_SIZE,
	.flags = I2C_AQ_COMB_WRITE_THEN_READ \| I2C_AQ_NO_ZERO_LEN \| I2C_AQ_NO_REP_START,
	.max_comb_1st_msg_len = MAX_I2C_SIZE,
	.max_comb_2nd_msg_len = MAX_I2C_SIZE
	};

	static void
	cp2615_i2c_remove(struct usb_interface *usbif)
	{
	struct i2c_adapter *adap = usb_get_intfdata(usbif);

	usb_set_intfdata(usbif, NULL);
	i2c_del_adapter(adap);
	}

	static int
	cp2615_i2c_probe(struct usb_interface usbif, const struct usb_device_id id)
	{
	int ret = 0;
	struct i2c_adapter *adap;
	struct usb_device *usbdev = interface_to_usbdev(usbif);

	ret = usb_set_interface(usbdev, IOP_IFN, IOP_ALTSETTING);
	if (ret)
	return ret;

	ret = cp2615_check_iop(usbif);
	if (ret)
	return ret;

	adap = devm_kzalloc(&usbif->dev, sizeof(struct i2c_adapter), GFP_KERNEL);
	if (!adap)
	return -ENOMEM;

	strncpy(adap->name, usbdev->serial, sizeof(adap->name) - 1);
	adap->owner = THIS_MODULE;
	adap->dev.parent = &usbif->dev;
	adap->dev.of_node = usbif->dev.of_node;
	adap->timeout = HZ;
	adap->algo = &cp2615_i2c_algo;
	adap->quirks = &cp2615_i2c_quirks;
	adap->algo_data = usbif;

	ret = i2c_add_adapter(adap);
	if (ret)
	return ret;

	usb_set_intfdata(usbif, adap);
	return 0;
	}

	static const struct usb_device_id id_table[] = {
	{ USB_DEVICE_INTERFACE_NUMBER(CP2615_VID, CP2615_PID, IOP_IFN) },
	{ }
	};

	MODULE_DEVICE_TABLE(usb, id_table);

	static struct usb_driver cp2615_i2c_driver = {
	.name = "i2c-cp2615",
	.probe = cp2615_i2c_probe,
	.disconnect = cp2615_i2c_remove,
	.id_table = id_table,
	};

	module_usb_driver(cp2615_i2c_driver);

	MODULE_AUTHOR("Bence Csókás <bence98@sch.bme.hu>");
	MODULE_DESCRIPTION("CP2615 I2C bus driver");
	MODULE_LICENSE("GPL");