| // SPDX-License-Identifier: GPL-2.0 |
| /* Marvell Octeon EP (EndPoint) Ethernet Driver |
| * |
| * Copyright (C) 2020 Marvell. |
| * |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/aer.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/rtnetlink.h> |
| #include <linux/vmalloc.h> |
| |
| #include "octep_config.h" |
| #include "octep_main.h" |
| #include "octep_ctrl_net.h" |
| |
| struct workqueue_struct *octep_wq; |
| |
| /* Supported Devices */ |
| static const struct pci_device_id octep_pci_id_tbl[] = { |
| {PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, OCTEP_PCI_DEVICE_ID_CN93_PF)}, |
| {PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, OCTEP_PCI_DEVICE_ID_CNF95N_PF)}, |
| {0, }, |
| }; |
| MODULE_DEVICE_TABLE(pci, octep_pci_id_tbl); |
| |
| MODULE_AUTHOR("Veerasenareddy Burru <vburru@marvell.com>"); |
| MODULE_DESCRIPTION(OCTEP_DRV_STRING); |
| MODULE_LICENSE("GPL"); |
| |
| /** |
| * octep_alloc_ioq_vectors() - Allocate Tx/Rx Queue interrupt info. |
| * |
| * @oct: Octeon device private data structure. |
| * |
| * Allocate resources to hold per Tx/Rx queue interrupt info. |
| * This is the information passed to interrupt handler, from which napi poll |
| * is scheduled and includes quick access to private data of Tx/Rx queue |
| * corresponding to the interrupt being handled. |
| * |
| * Return: 0, on successful allocation of resources for all queue interrupts. |
| * -1, if failed to allocate any resource. |
| */ |
| static int octep_alloc_ioq_vectors(struct octep_device *oct) |
| { |
| int i; |
| struct octep_ioq_vector *ioq_vector; |
| |
| for (i = 0; i < oct->num_oqs; i++) { |
| oct->ioq_vector[i] = vzalloc(sizeof(*oct->ioq_vector[i])); |
| if (!oct->ioq_vector[i]) |
| goto free_ioq_vector; |
| |
| ioq_vector = oct->ioq_vector[i]; |
| ioq_vector->iq = oct->iq[i]; |
| ioq_vector->oq = oct->oq[i]; |
| ioq_vector->octep_dev = oct; |
| } |
| |
| dev_info(&oct->pdev->dev, "Allocated %d IOQ vectors\n", oct->num_oqs); |
| return 0; |
| |
| free_ioq_vector: |
| while (i) { |
| i--; |
| vfree(oct->ioq_vector[i]); |
| oct->ioq_vector[i] = NULL; |
| } |
| return -1; |
| } |
| |
| /** |
| * octep_free_ioq_vectors() - Free Tx/Rx Queue interrupt vector info. |
| * |
| * @oct: Octeon device private data structure. |
| */ |
| static void octep_free_ioq_vectors(struct octep_device *oct) |
| { |
| int i; |
| |
| for (i = 0; i < oct->num_oqs; i++) { |
| if (oct->ioq_vector[i]) { |
| vfree(oct->ioq_vector[i]); |
| oct->ioq_vector[i] = NULL; |
| } |
| } |
| netdev_info(oct->netdev, "Freed IOQ Vectors\n"); |
| } |
| |
| /** |
| * octep_enable_msix_range() - enable MSI-x interrupts. |
| * |
| * @oct: Octeon device private data structure. |
| * |
| * Allocate and enable all MSI-x interrupts (queue and non-queue interrupts) |
| * for the Octeon device. |
| * |
| * Return: 0, on successfully enabling all MSI-x interrupts. |
| * -1, if failed to enable any MSI-x interrupt. |
| */ |
| static int octep_enable_msix_range(struct octep_device *oct) |
| { |
| int num_msix, msix_allocated; |
| int i; |
| |
| /* Generic interrupts apart from input/output queues */ |
| num_msix = oct->num_oqs + CFG_GET_NON_IOQ_MSIX(oct->conf); |
| oct->msix_entries = kcalloc(num_msix, |
| sizeof(struct msix_entry), GFP_KERNEL); |
| if (!oct->msix_entries) |
| goto msix_alloc_err; |
| |
| for (i = 0; i < num_msix; i++) |
| oct->msix_entries[i].entry = i; |
| |
| msix_allocated = pci_enable_msix_range(oct->pdev, oct->msix_entries, |
| num_msix, num_msix); |
| if (msix_allocated != num_msix) { |
| dev_err(&oct->pdev->dev, |
| "Failed to enable %d msix irqs; got only %d\n", |
| num_msix, msix_allocated); |
| goto enable_msix_err; |
| } |
| oct->num_irqs = msix_allocated; |
| dev_info(&oct->pdev->dev, "MSI-X enabled successfully\n"); |
| |
| return 0; |
| |
| enable_msix_err: |
| if (msix_allocated > 0) |
| pci_disable_msix(oct->pdev); |
| kfree(oct->msix_entries); |
| oct->msix_entries = NULL; |
| msix_alloc_err: |
| return -1; |
| } |
| |
| /** |
| * octep_disable_msix() - disable MSI-x interrupts. |
| * |
| * @oct: Octeon device private data structure. |
| * |
| * Disable MSI-x on the Octeon device. |
| */ |
| static void octep_disable_msix(struct octep_device *oct) |
| { |
| pci_disable_msix(oct->pdev); |
| kfree(oct->msix_entries); |
| oct->msix_entries = NULL; |
| dev_info(&oct->pdev->dev, "Disabled MSI-X\n"); |
| } |
| |
| /** |
| * octep_non_ioq_intr_handler() - common handler for all generic interrupts. |
| * |
| * @irq: Interrupt number. |
| * @data: interrupt data. |
| * |
| * this is common handler for all non-queue (generic) interrupts. |
| */ |
| static irqreturn_t octep_non_ioq_intr_handler(int irq, void *data) |
| { |
| struct octep_device *oct = data; |
| |
| return oct->hw_ops.non_ioq_intr_handler(oct); |
| } |
| |
| /** |
| * octep_ioq_intr_handler() - handler for all Tx/Rx queue interrupts. |
| * |
| * @irq: Interrupt number. |
| * @data: interrupt data contains pointers to Tx/Rx queue private data |
| * and correspong NAPI context. |
| * |
| * this is common handler for all non-queue (generic) interrupts. |
| */ |
| static irqreturn_t octep_ioq_intr_handler(int irq, void *data) |
| { |
| struct octep_ioq_vector *ioq_vector = data; |
| struct octep_device *oct = ioq_vector->octep_dev; |
| |
| return oct->hw_ops.ioq_intr_handler(ioq_vector); |
| } |
| |
| /** |
| * octep_request_irqs() - Register interrupt handlers. |
| * |
| * @oct: Octeon device private data structure. |
| * |
| * Register handlers for all queue and non-queue interrupts. |
| * |
| * Return: 0, on successful registration of all interrupt handlers. |
| * -1, on any error. |
| */ |
| static int octep_request_irqs(struct octep_device *oct) |
| { |
| struct net_device *netdev = oct->netdev; |
| struct octep_ioq_vector *ioq_vector; |
| struct msix_entry *msix_entry; |
| char **non_ioq_msix_names; |
| int num_non_ioq_msix; |
| int ret, i, j; |
| |
| num_non_ioq_msix = CFG_GET_NON_IOQ_MSIX(oct->conf); |
| non_ioq_msix_names = CFG_GET_NON_IOQ_MSIX_NAMES(oct->conf); |
| |
| oct->non_ioq_irq_names = kcalloc(num_non_ioq_msix, |
| OCTEP_MSIX_NAME_SIZE, GFP_KERNEL); |
| if (!oct->non_ioq_irq_names) |
| goto alloc_err; |
| |
| /* First few MSI-X interrupts are non-queue interrupts */ |
| for (i = 0; i < num_non_ioq_msix; i++) { |
| char *irq_name; |
| |
| irq_name = &oct->non_ioq_irq_names[i * OCTEP_MSIX_NAME_SIZE]; |
| msix_entry = &oct->msix_entries[i]; |
| |
| snprintf(irq_name, OCTEP_MSIX_NAME_SIZE, |
| "%s-%s", netdev->name, non_ioq_msix_names[i]); |
| ret = request_irq(msix_entry->vector, |
| octep_non_ioq_intr_handler, 0, |
| irq_name, oct); |
| if (ret) { |
| netdev_err(netdev, |
| "request_irq failed for %s; err=%d", |
| irq_name, ret); |
| goto non_ioq_irq_err; |
| } |
| } |
| |
| /* Request IRQs for Tx/Rx queues */ |
| for (j = 0; j < oct->num_oqs; j++) { |
| ioq_vector = oct->ioq_vector[j]; |
| msix_entry = &oct->msix_entries[j + num_non_ioq_msix]; |
| |
| snprintf(ioq_vector->name, sizeof(ioq_vector->name), |
| "%s-q%d", netdev->name, j); |
| ret = request_irq(msix_entry->vector, |
| octep_ioq_intr_handler, 0, |
| ioq_vector->name, ioq_vector); |
| if (ret) { |
| netdev_err(netdev, |
| "request_irq failed for Q-%d; err=%d", |
| j, ret); |
| goto ioq_irq_err; |
| } |
| |
| cpumask_set_cpu(j % num_online_cpus(), |
| &ioq_vector->affinity_mask); |
| irq_set_affinity_hint(msix_entry->vector, |
| &ioq_vector->affinity_mask); |
| } |
| |
| return 0; |
| ioq_irq_err: |
| while (j) { |
| --j; |
| ioq_vector = oct->ioq_vector[j]; |
| msix_entry = &oct->msix_entries[j + num_non_ioq_msix]; |
| |
| irq_set_affinity_hint(msix_entry->vector, NULL); |
| free_irq(msix_entry->vector, ioq_vector); |
| } |
| non_ioq_irq_err: |
| while (i) { |
| --i; |
| free_irq(oct->msix_entries[i].vector, oct); |
| } |
| kfree(oct->non_ioq_irq_names); |
| oct->non_ioq_irq_names = NULL; |
| alloc_err: |
| return -1; |
| } |
| |
| /** |
| * octep_free_irqs() - free all registered interrupts. |
| * |
| * @oct: Octeon device private data structure. |
| * |
| * Free all queue and non-queue interrupts of the Octeon device. |
| */ |
| static void octep_free_irqs(struct octep_device *oct) |
| { |
| int i; |
| |
| /* First few MSI-X interrupts are non queue interrupts; free them */ |
| for (i = 0; i < CFG_GET_NON_IOQ_MSIX(oct->conf); i++) |
| free_irq(oct->msix_entries[i].vector, oct); |
| kfree(oct->non_ioq_irq_names); |
| |
| /* Free IRQs for Input/Output (Tx/Rx) queues */ |
| for (i = CFG_GET_NON_IOQ_MSIX(oct->conf); i < oct->num_irqs; i++) { |
| irq_set_affinity_hint(oct->msix_entries[i].vector, NULL); |
| free_irq(oct->msix_entries[i].vector, |
| oct->ioq_vector[i - CFG_GET_NON_IOQ_MSIX(oct->conf)]); |
| } |
| netdev_info(oct->netdev, "IRQs freed\n"); |
| } |
| |
| /** |
| * octep_setup_irqs() - setup interrupts for the Octeon device. |
| * |
| * @oct: Octeon device private data structure. |
| * |
| * Allocate data structures to hold per interrupt information, allocate/enable |
| * MSI-x interrupt and register interrupt handlers. |
| * |
| * Return: 0, on successful allocation and registration of all interrupts. |
| * -1, on any error. |
| */ |
| static int octep_setup_irqs(struct octep_device *oct) |
| { |
| if (octep_alloc_ioq_vectors(oct)) |
| goto ioq_vector_err; |
| |
| if (octep_enable_msix_range(oct)) |
| goto enable_msix_err; |
| |
| if (octep_request_irqs(oct)) |
| goto request_irq_err; |
| |
| return 0; |
| |
| request_irq_err: |
| octep_disable_msix(oct); |
| enable_msix_err: |
| octep_free_ioq_vectors(oct); |
| ioq_vector_err: |
| return -1; |
| } |
| |
| /** |
| * octep_clean_irqs() - free all interrupts and its resources. |
| * |
| * @oct: Octeon device private data structure. |
| */ |
| static void octep_clean_irqs(struct octep_device *oct) |
| { |
| octep_free_irqs(oct); |
| octep_disable_msix(oct); |
| octep_free_ioq_vectors(oct); |
| } |
| |
| /** |
| * octep_enable_ioq_irq() - Enable MSI-x interrupt of a Tx/Rx queue. |
| * |
| * @iq: Octeon Tx queue data structure. |
| * @oq: Octeon Rx queue data structure. |
| */ |
| static void octep_enable_ioq_irq(struct octep_iq *iq, struct octep_oq *oq) |
| { |
| u32 pkts_pend = oq->pkts_pending; |
| |
| netdev_dbg(iq->netdev, "enabling intr for Q-%u\n", iq->q_no); |
| if (iq->pkts_processed) { |
| writel(iq->pkts_processed, iq->inst_cnt_reg); |
| iq->pkt_in_done -= iq->pkts_processed; |
| iq->pkts_processed = 0; |
| } |
| if (oq->last_pkt_count - pkts_pend) { |
| writel(oq->last_pkt_count - pkts_pend, oq->pkts_sent_reg); |
| oq->last_pkt_count = pkts_pend; |
| } |
| |
| /* Flush the previous wrties before writing to RESEND bit */ |
| wmb(); |
| writeq(1UL << OCTEP_OQ_INTR_RESEND_BIT, oq->pkts_sent_reg); |
| writeq(1UL << OCTEP_IQ_INTR_RESEND_BIT, iq->inst_cnt_reg); |
| } |
| |
| /** |
| * octep_napi_poll() - NAPI poll function for Tx/Rx. |
| * |
| * @napi: pointer to napi context. |
| * @budget: max number of packets to be processed in single invocation. |
| */ |
| static int octep_napi_poll(struct napi_struct *napi, int budget) |
| { |
| struct octep_ioq_vector *ioq_vector = |
| container_of(napi, struct octep_ioq_vector, napi); |
| u32 tx_pending, rx_done; |
| |
| tx_pending = octep_iq_process_completions(ioq_vector->iq, budget); |
| rx_done = octep_oq_process_rx(ioq_vector->oq, budget); |
| |
| /* need more polling if tx completion processing is still pending or |
| * processed at least 'budget' number of rx packets. |
| */ |
| if (tx_pending || rx_done >= budget) |
| return budget; |
| |
| napi_complete(napi); |
| octep_enable_ioq_irq(ioq_vector->iq, ioq_vector->oq); |
| return rx_done; |
| } |
| |
| /** |
| * octep_napi_add() - Add NAPI poll for all Tx/Rx queues. |
| * |
| * @oct: Octeon device private data structure. |
| */ |
| static void octep_napi_add(struct octep_device *oct) |
| { |
| int i; |
| |
| for (i = 0; i < oct->num_oqs; i++) { |
| netdev_dbg(oct->netdev, "Adding NAPI on Q-%d\n", i); |
| netif_napi_add(oct->netdev, &oct->ioq_vector[i]->napi, |
| octep_napi_poll); |
| oct->oq[i]->napi = &oct->ioq_vector[i]->napi; |
| } |
| } |
| |
| /** |
| * octep_napi_delete() - delete NAPI poll callback for all Tx/Rx queues. |
| * |
| * @oct: Octeon device private data structure. |
| */ |
| static void octep_napi_delete(struct octep_device *oct) |
| { |
| int i; |
| |
| for (i = 0; i < oct->num_oqs; i++) { |
| netdev_dbg(oct->netdev, "Deleting NAPI on Q-%d\n", i); |
| netif_napi_del(&oct->ioq_vector[i]->napi); |
| oct->oq[i]->napi = NULL; |
| } |
| } |
| |
| /** |
| * octep_napi_enable() - enable NAPI for all Tx/Rx queues. |
| * |
| * @oct: Octeon device private data structure. |
| */ |
| static void octep_napi_enable(struct octep_device *oct) |
| { |
| int i; |
| |
| for (i = 0; i < oct->num_oqs; i++) { |
| netdev_dbg(oct->netdev, "Enabling NAPI on Q-%d\n", i); |
| napi_enable(&oct->ioq_vector[i]->napi); |
| } |
| } |
| |
| /** |
| * octep_napi_disable() - disable NAPI for all Tx/Rx queues. |
| * |
| * @oct: Octeon device private data structure. |
| */ |
| static void octep_napi_disable(struct octep_device *oct) |
| { |
| int i; |
| |
| for (i = 0; i < oct->num_oqs; i++) { |
| netdev_dbg(oct->netdev, "Disabling NAPI on Q-%d\n", i); |
| napi_disable(&oct->ioq_vector[i]->napi); |
| } |
| } |
| |
| static void octep_link_up(struct net_device *netdev) |
| { |
| netif_carrier_on(netdev); |
| netif_tx_start_all_queues(netdev); |
| } |
| |
| /** |
| * octep_open() - start the octeon network device. |
| * |
| * @netdev: pointer to kernel network device. |
| * |
| * setup Tx/Rx queues, interrupts and enable hardware operation of Tx/Rx queues |
| * and interrupts.. |
| * |
| * Return: 0, on successfully setting up device and bring it up. |
| * -1, on any error. |
| */ |
| static int octep_open(struct net_device *netdev) |
| { |
| struct octep_device *oct = netdev_priv(netdev); |
| int err, ret; |
| |
| netdev_info(netdev, "Starting netdev ...\n"); |
| netif_carrier_off(netdev); |
| |
| oct->hw_ops.reset_io_queues(oct); |
| |
| if (octep_setup_iqs(oct)) |
| goto setup_iq_err; |
| if (octep_setup_oqs(oct)) |
| goto setup_oq_err; |
| if (octep_setup_irqs(oct)) |
| goto setup_irq_err; |
| |
| err = netif_set_real_num_tx_queues(netdev, oct->num_oqs); |
| if (err) |
| goto set_queues_err; |
| err = netif_set_real_num_rx_queues(netdev, oct->num_iqs); |
| if (err) |
| goto set_queues_err; |
| |
| octep_napi_add(oct); |
| octep_napi_enable(oct); |
| |
| oct->link_info.admin_up = 1; |
| octep_set_rx_state(oct, true); |
| |
| ret = octep_get_link_status(oct); |
| if (!ret) |
| octep_set_link_status(oct, true); |
| |
| /* Enable the input and output queues for this Octeon device */ |
| oct->hw_ops.enable_io_queues(oct); |
| |
| /* Enable Octeon device interrupts */ |
| oct->hw_ops.enable_interrupts(oct); |
| |
| octep_oq_dbell_init(oct); |
| |
| ret = octep_get_link_status(oct); |
| if (ret > 0) |
| octep_link_up(netdev); |
| |
| return 0; |
| |
| set_queues_err: |
| octep_clean_irqs(oct); |
| setup_irq_err: |
| octep_free_oqs(oct); |
| setup_oq_err: |
| octep_free_iqs(oct); |
| setup_iq_err: |
| return -1; |
| } |
| |
| /** |
| * octep_stop() - stop the octeon network device. |
| * |
| * @netdev: pointer to kernel network device. |
| * |
| * stop the device Tx/Rx operations, bring down the link and |
| * free up all resources allocated for Tx/Rx queues and interrupts. |
| */ |
| static int octep_stop(struct net_device *netdev) |
| { |
| struct octep_device *oct = netdev_priv(netdev); |
| |
| netdev_info(netdev, "Stopping the device ...\n"); |
| |
| /* Stop Tx from stack */ |
| netif_tx_stop_all_queues(netdev); |
| netif_carrier_off(netdev); |
| netif_tx_disable(netdev); |
| |
| octep_set_link_status(oct, false); |
| octep_set_rx_state(oct, false); |
| |
| oct->link_info.admin_up = 0; |
| oct->link_info.oper_up = 0; |
| |
| oct->hw_ops.disable_interrupts(oct); |
| octep_napi_disable(oct); |
| octep_napi_delete(oct); |
| |
| octep_clean_irqs(oct); |
| octep_clean_iqs(oct); |
| |
| oct->hw_ops.disable_io_queues(oct); |
| oct->hw_ops.reset_io_queues(oct); |
| octep_free_oqs(oct); |
| octep_free_iqs(oct); |
| netdev_info(netdev, "Device stopped !!\n"); |
| return 0; |
| } |
| |
| /** |
| * octep_iq_full_check() - check if a Tx queue is full. |
| * |
| * @iq: Octeon Tx queue data structure. |
| * |
| * Return: 0, if the Tx queue is not full. |
| * 1, if the Tx queue is full. |
| */ |
| static inline int octep_iq_full_check(struct octep_iq *iq) |
| { |
| if (likely((iq->max_count - atomic_read(&iq->instr_pending)) >= |
| OCTEP_WAKE_QUEUE_THRESHOLD)) |
| return 0; |
| |
| /* Stop the queue if unable to send */ |
| netif_stop_subqueue(iq->netdev, iq->q_no); |
| |
| /* check again and restart the queue, in case NAPI has just freed |
| * enough Tx ring entries. |
| */ |
| if (unlikely((iq->max_count - atomic_read(&iq->instr_pending)) >= |
| OCTEP_WAKE_QUEUE_THRESHOLD)) { |
| netif_start_subqueue(iq->netdev, iq->q_no); |
| iq->stats.restart_cnt++; |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| /** |
| * octep_start_xmit() - Enqueue packet to Octoen hardware Tx Queue. |
| * |
| * @skb: packet skbuff pointer. |
| * @netdev: kernel network device. |
| * |
| * Return: NETDEV_TX_BUSY, if Tx Queue is full. |
| * NETDEV_TX_OK, if successfully enqueued to hardware Tx queue. |
| */ |
| static netdev_tx_t octep_start_xmit(struct sk_buff *skb, |
| struct net_device *netdev) |
| { |
| struct octep_device *oct = netdev_priv(netdev); |
| struct octep_tx_sglist_desc *sglist; |
| struct octep_tx_buffer *tx_buffer; |
| struct octep_tx_desc_hw *hw_desc; |
| struct skb_shared_info *shinfo; |
| struct octep_instr_hdr *ih; |
| struct octep_iq *iq; |
| skb_frag_t *frag; |
| u16 nr_frags, si; |
| u16 q_no, wi; |
| |
| q_no = skb_get_queue_mapping(skb); |
| if (q_no >= oct->num_iqs) { |
| netdev_err(netdev, "Invalid Tx skb->queue_mapping=%d\n", q_no); |
| q_no = q_no % oct->num_iqs; |
| } |
| |
| iq = oct->iq[q_no]; |
| if (octep_iq_full_check(iq)) { |
| iq->stats.tx_busy++; |
| return NETDEV_TX_BUSY; |
| } |
| |
| shinfo = skb_shinfo(skb); |
| nr_frags = shinfo->nr_frags; |
| |
| wi = iq->host_write_index; |
| hw_desc = &iq->desc_ring[wi]; |
| hw_desc->ih64 = 0; |
| |
| tx_buffer = iq->buff_info + wi; |
| tx_buffer->skb = skb; |
| |
| ih = &hw_desc->ih; |
| ih->tlen = skb->len; |
| ih->pkind = oct->pkind; |
| |
| if (!nr_frags) { |
| tx_buffer->gather = 0; |
| tx_buffer->dma = dma_map_single(iq->dev, skb->data, |
| skb->len, DMA_TO_DEVICE); |
| if (dma_mapping_error(iq->dev, tx_buffer->dma)) |
| goto dma_map_err; |
| hw_desc->dptr = tx_buffer->dma; |
| } else { |
| /* Scatter/Gather */ |
| dma_addr_t dma; |
| u16 len; |
| |
| sglist = tx_buffer->sglist; |
| |
| ih->gsz = nr_frags + 1; |
| ih->gather = 1; |
| tx_buffer->gather = 1; |
| |
| len = skb_headlen(skb); |
| dma = dma_map_single(iq->dev, skb->data, len, DMA_TO_DEVICE); |
| if (dma_mapping_error(iq->dev, dma)) |
| goto dma_map_err; |
| |
| dma_sync_single_for_cpu(iq->dev, tx_buffer->sglist_dma, |
| OCTEP_SGLIST_SIZE_PER_PKT, |
| DMA_TO_DEVICE); |
| memset(sglist, 0, OCTEP_SGLIST_SIZE_PER_PKT); |
| sglist[0].len[3] = len; |
| sglist[0].dma_ptr[0] = dma; |
| |
| si = 1; /* entry 0 is main skb, mapped above */ |
| frag = &shinfo->frags[0]; |
| while (nr_frags--) { |
| len = skb_frag_size(frag); |
| dma = skb_frag_dma_map(iq->dev, frag, 0, |
| len, DMA_TO_DEVICE); |
| if (dma_mapping_error(iq->dev, dma)) |
| goto dma_map_sg_err; |
| |
| sglist[si >> 2].len[3 - (si & 3)] = len; |
| sglist[si >> 2].dma_ptr[si & 3] = dma; |
| |
| frag++; |
| si++; |
| } |
| dma_sync_single_for_device(iq->dev, tx_buffer->sglist_dma, |
| OCTEP_SGLIST_SIZE_PER_PKT, |
| DMA_TO_DEVICE); |
| |
| hw_desc->dptr = tx_buffer->sglist_dma; |
| } |
| |
| /* Flush the hw descriptor before writing to doorbell */ |
| wmb(); |
| |
| /* Ring Doorbell to notify the NIC there is a new packet */ |
| writel(1, iq->doorbell_reg); |
| atomic_inc(&iq->instr_pending); |
| wi++; |
| if (wi == iq->max_count) |
| wi = 0; |
| iq->host_write_index = wi; |
| |
| netdev_tx_sent_queue(iq->netdev_q, skb->len); |
| iq->stats.instr_posted++; |
| skb_tx_timestamp(skb); |
| return NETDEV_TX_OK; |
| |
| dma_map_sg_err: |
| if (si > 0) { |
| dma_unmap_single(iq->dev, sglist[0].dma_ptr[0], |
| sglist[0].len[0], DMA_TO_DEVICE); |
| sglist[0].len[0] = 0; |
| } |
| while (si > 1) { |
| dma_unmap_page(iq->dev, sglist[si >> 2].dma_ptr[si & 3], |
| sglist[si >> 2].len[si & 3], DMA_TO_DEVICE); |
| sglist[si >> 2].len[si & 3] = 0; |
| si--; |
| } |
| tx_buffer->gather = 0; |
| dma_map_err: |
| dev_kfree_skb_any(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| /** |
| * octep_get_stats64() - Get Octeon network device statistics. |
| * |
| * @netdev: kernel network device. |
| * @stats: pointer to stats structure to be filled in. |
| */ |
| static void octep_get_stats64(struct net_device *netdev, |
| struct rtnl_link_stats64 *stats) |
| { |
| u64 tx_packets, tx_bytes, rx_packets, rx_bytes; |
| struct octep_device *oct = netdev_priv(netdev); |
| int q; |
| |
| octep_get_if_stats(oct); |
| tx_packets = 0; |
| tx_bytes = 0; |
| rx_packets = 0; |
| rx_bytes = 0; |
| for (q = 0; q < oct->num_oqs; q++) { |
| struct octep_iq *iq = oct->iq[q]; |
| struct octep_oq *oq = oct->oq[q]; |
| |
| tx_packets += iq->stats.instr_completed; |
| tx_bytes += iq->stats.bytes_sent; |
| rx_packets += oq->stats.packets; |
| rx_bytes += oq->stats.bytes; |
| } |
| stats->tx_packets = tx_packets; |
| stats->tx_bytes = tx_bytes; |
| stats->rx_packets = rx_packets; |
| stats->rx_bytes = rx_bytes; |
| stats->multicast = oct->iface_rx_stats.mcast_pkts; |
| stats->rx_errors = oct->iface_rx_stats.err_pkts; |
| stats->collisions = oct->iface_tx_stats.xscol; |
| stats->tx_fifo_errors = oct->iface_tx_stats.undflw; |
| } |
| |
| /** |
| * octep_tx_timeout_task - work queue task to Handle Tx queue timeout. |
| * |
| * @work: pointer to Tx queue timeout work_struct |
| * |
| * Stop and start the device so that it frees up all queue resources |
| * and restarts the queues, that potentially clears a Tx queue timeout |
| * condition. |
| **/ |
| static void octep_tx_timeout_task(struct work_struct *work) |
| { |
| struct octep_device *oct = container_of(work, struct octep_device, |
| tx_timeout_task); |
| struct net_device *netdev = oct->netdev; |
| |
| rtnl_lock(); |
| if (netif_running(netdev)) { |
| octep_stop(netdev); |
| octep_open(netdev); |
| } |
| rtnl_unlock(); |
| } |
| |
| /** |
| * octep_tx_timeout() - Handle Tx Queue timeout. |
| * |
| * @netdev: pointer to kernel network device. |
| * @txqueue: Timed out Tx queue number. |
| * |
| * Schedule a work to handle Tx queue timeout. |
| */ |
| static void octep_tx_timeout(struct net_device *netdev, unsigned int txqueue) |
| { |
| struct octep_device *oct = netdev_priv(netdev); |
| |
| queue_work(octep_wq, &oct->tx_timeout_task); |
| } |
| |
| static int octep_set_mac(struct net_device *netdev, void *p) |
| { |
| struct octep_device *oct = netdev_priv(netdev); |
| struct sockaddr *addr = (struct sockaddr *)p; |
| int err; |
| |
| if (!is_valid_ether_addr(addr->sa_data)) |
| return -EADDRNOTAVAIL; |
| |
| err = octep_set_mac_addr(oct, addr->sa_data); |
| if (err) |
| return err; |
| |
| memcpy(oct->mac_addr, addr->sa_data, ETH_ALEN); |
| eth_hw_addr_set(netdev, addr->sa_data); |
| |
| return 0; |
| } |
| |
| static int octep_change_mtu(struct net_device *netdev, int new_mtu) |
| { |
| struct octep_device *oct = netdev_priv(netdev); |
| struct octep_iface_link_info *link_info; |
| int err = 0; |
| |
| link_info = &oct->link_info; |
| if (link_info->mtu == new_mtu) |
| return 0; |
| |
| err = octep_set_mtu(oct, new_mtu); |
| if (!err) { |
| oct->link_info.mtu = new_mtu; |
| netdev->mtu = new_mtu; |
| } |
| |
| return err; |
| } |
| |
| static const struct net_device_ops octep_netdev_ops = { |
| .ndo_open = octep_open, |
| .ndo_stop = octep_stop, |
| .ndo_start_xmit = octep_start_xmit, |
| .ndo_get_stats64 = octep_get_stats64, |
| .ndo_tx_timeout = octep_tx_timeout, |
| .ndo_set_mac_address = octep_set_mac, |
| .ndo_change_mtu = octep_change_mtu, |
| }; |
| |
| /** |
| * octep_ctrl_mbox_task - work queue task to handle ctrl mbox messages. |
| * |
| * @work: pointer to ctrl mbox work_struct |
| * |
| * Poll ctrl mbox message queue and handle control messages from firmware. |
| **/ |
| static void octep_ctrl_mbox_task(struct work_struct *work) |
| { |
| struct octep_device *oct = container_of(work, struct octep_device, |
| ctrl_mbox_task); |
| struct net_device *netdev = oct->netdev; |
| struct octep_ctrl_net_f2h_req req = {}; |
| struct octep_ctrl_mbox_msg msg; |
| int ret = 0; |
| |
| msg.msg = &req; |
| while (true) { |
| ret = octep_ctrl_mbox_recv(&oct->ctrl_mbox, &msg); |
| if (ret) |
| break; |
| |
| switch (req.hdr.cmd) { |
| case OCTEP_CTRL_NET_F2H_CMD_LINK_STATUS: |
| if (netif_running(netdev)) { |
| if (req.link.state) { |
| dev_info(&oct->pdev->dev, "netif_carrier_on\n"); |
| netif_carrier_on(netdev); |
| } else { |
| dev_info(&oct->pdev->dev, "netif_carrier_off\n"); |
| netif_carrier_off(netdev); |
| } |
| } |
| break; |
| default: |
| pr_info("Unknown mbox req : %u\n", req.hdr.cmd); |
| break; |
| } |
| } |
| } |
| |
| static const char *octep_devid_to_str(struct octep_device *oct) |
| { |
| switch (oct->chip_id) { |
| case OCTEP_PCI_DEVICE_ID_CN93_PF: |
| return "CN93XX"; |
| case OCTEP_PCI_DEVICE_ID_CNF95N_PF: |
| return "CNF95N"; |
| default: |
| return "Unsupported"; |
| } |
| } |
| |
| /** |
| * octep_device_setup() - Setup Octeon Device. |
| * |
| * @oct: Octeon device private data structure. |
| * |
| * Setup Octeon device hardware operations, configuration, etc ... |
| */ |
| int octep_device_setup(struct octep_device *oct) |
| { |
| struct octep_ctrl_mbox *ctrl_mbox; |
| struct pci_dev *pdev = oct->pdev; |
| int i, ret; |
| |
| /* allocate memory for oct->conf */ |
| oct->conf = kzalloc(sizeof(*oct->conf), GFP_KERNEL); |
| if (!oct->conf) |
| return -ENOMEM; |
| |
| /* Map BAR regions */ |
| for (i = 0; i < OCTEP_MMIO_REGIONS; i++) { |
| oct->mmio[i].hw_addr = |
| ioremap(pci_resource_start(oct->pdev, i * 2), |
| pci_resource_len(oct->pdev, i * 2)); |
| oct->mmio[i].mapped = 1; |
| } |
| |
| oct->chip_id = pdev->device; |
| oct->rev_id = pdev->revision; |
| dev_info(&pdev->dev, "chip_id = 0x%x\n", pdev->device); |
| |
| switch (oct->chip_id) { |
| case OCTEP_PCI_DEVICE_ID_CN93_PF: |
| case OCTEP_PCI_DEVICE_ID_CNF95N_PF: |
| dev_info(&pdev->dev, "Setting up OCTEON %s PF PASS%d.%d\n", |
| octep_devid_to_str(oct), OCTEP_MAJOR_REV(oct), |
| OCTEP_MINOR_REV(oct)); |
| octep_device_setup_cn93_pf(oct); |
| break; |
| default: |
| dev_err(&pdev->dev, |
| "%s: unsupported device\n", __func__); |
| goto unsupported_dev; |
| } |
| |
| oct->pkind = CFG_GET_IQ_PKIND(oct->conf); |
| |
| /* Initialize control mbox */ |
| ctrl_mbox = &oct->ctrl_mbox; |
| ctrl_mbox->barmem = CFG_GET_CTRL_MBOX_MEM_ADDR(oct->conf); |
| ret = octep_ctrl_mbox_init(ctrl_mbox); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to initialize control mbox\n"); |
| goto unsupported_dev; |
| } |
| oct->ctrl_mbox_ifstats_offset = OCTEP_CTRL_MBOX_SZ(ctrl_mbox->h2fq.elem_sz, |
| ctrl_mbox->h2fq.elem_cnt, |
| ctrl_mbox->f2hq.elem_sz, |
| ctrl_mbox->f2hq.elem_cnt); |
| |
| return 0; |
| |
| unsupported_dev: |
| for (i = 0; i < OCTEP_MMIO_REGIONS; i++) |
| iounmap(oct->mmio[i].hw_addr); |
| |
| kfree(oct->conf); |
| return -1; |
| } |
| |
| /** |
| * octep_device_cleanup() - Cleanup Octeon Device. |
| * |
| * @oct: Octeon device private data structure. |
| * |
| * Cleanup Octeon device allocated resources. |
| */ |
| static void octep_device_cleanup(struct octep_device *oct) |
| { |
| int i; |
| |
| dev_info(&oct->pdev->dev, "Cleaning up Octeon Device ...\n"); |
| |
| for (i = 0; i < OCTEP_MAX_VF; i++) { |
| vfree(oct->mbox[i]); |
| oct->mbox[i] = NULL; |
| } |
| |
| octep_ctrl_mbox_uninit(&oct->ctrl_mbox); |
| |
| oct->hw_ops.soft_reset(oct); |
| for (i = 0; i < OCTEP_MMIO_REGIONS; i++) { |
| if (oct->mmio[i].mapped) |
| iounmap(oct->mmio[i].hw_addr); |
| } |
| |
| kfree(oct->conf); |
| oct->conf = NULL; |
| } |
| |
| /** |
| * octep_probe() - Octeon PCI device probe handler. |
| * |
| * @pdev: PCI device structure. |
| * @ent: entry in Octeon PCI device ID table. |
| * |
| * Initializes and enables the Octeon PCI device for network operations. |
| * Initializes Octeon private data structure and registers a network device. |
| */ |
| static int octep_probe(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| struct octep_device *octep_dev = NULL; |
| struct net_device *netdev; |
| int err; |
| |
| err = pci_enable_device(pdev); |
| if (err) { |
| dev_err(&pdev->dev, "Failed to enable PCI device\n"); |
| return err; |
| } |
| |
| err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); |
| if (err) { |
| dev_err(&pdev->dev, "Failed to set DMA mask !!\n"); |
| goto err_dma_mask; |
| } |
| |
| err = pci_request_mem_regions(pdev, OCTEP_DRV_NAME); |
| if (err) { |
| dev_err(&pdev->dev, "Failed to map PCI memory regions\n"); |
| goto err_pci_regions; |
| } |
| |
| pci_enable_pcie_error_reporting(pdev); |
| pci_set_master(pdev); |
| |
| netdev = alloc_etherdev_mq(sizeof(struct octep_device), |
| OCTEP_MAX_QUEUES); |
| if (!netdev) { |
| dev_err(&pdev->dev, "Failed to allocate netdev\n"); |
| err = -ENOMEM; |
| goto err_alloc_netdev; |
| } |
| SET_NETDEV_DEV(netdev, &pdev->dev); |
| |
| octep_dev = netdev_priv(netdev); |
| octep_dev->netdev = netdev; |
| octep_dev->pdev = pdev; |
| octep_dev->dev = &pdev->dev; |
| pci_set_drvdata(pdev, octep_dev); |
| |
| err = octep_device_setup(octep_dev); |
| if (err) { |
| dev_err(&pdev->dev, "Device setup failed\n"); |
| goto err_octep_config; |
| } |
| INIT_WORK(&octep_dev->tx_timeout_task, octep_tx_timeout_task); |
| INIT_WORK(&octep_dev->ctrl_mbox_task, octep_ctrl_mbox_task); |
| |
| netdev->netdev_ops = &octep_netdev_ops; |
| octep_set_ethtool_ops(netdev); |
| netif_carrier_off(netdev); |
| |
| netdev->hw_features = NETIF_F_SG; |
| netdev->features |= netdev->hw_features; |
| netdev->min_mtu = OCTEP_MIN_MTU; |
| netdev->max_mtu = OCTEP_MAX_MTU; |
| netdev->mtu = OCTEP_DEFAULT_MTU; |
| |
| err = octep_get_mac_addr(octep_dev, octep_dev->mac_addr); |
| if (err) { |
| dev_err(&pdev->dev, "Failed to get mac address\n"); |
| goto register_dev_err; |
| } |
| eth_hw_addr_set(netdev, octep_dev->mac_addr); |
| |
| err = register_netdev(netdev); |
| if (err) { |
| dev_err(&pdev->dev, "Failed to register netdev\n"); |
| goto register_dev_err; |
| } |
| dev_info(&pdev->dev, "Device probe successful\n"); |
| return 0; |
| |
| register_dev_err: |
| octep_device_cleanup(octep_dev); |
| err_octep_config: |
| free_netdev(netdev); |
| err_alloc_netdev: |
| pci_disable_pcie_error_reporting(pdev); |
| pci_release_mem_regions(pdev); |
| err_pci_regions: |
| err_dma_mask: |
| pci_disable_device(pdev); |
| return err; |
| } |
| |
| /** |
| * octep_remove() - Remove Octeon PCI device from driver control. |
| * |
| * @pdev: PCI device structure of the Octeon device. |
| * |
| * Cleanup all resources allocated for the Octeon device. |
| * Unregister from network device and disable the PCI device. |
| */ |
| static void octep_remove(struct pci_dev *pdev) |
| { |
| struct octep_device *oct = pci_get_drvdata(pdev); |
| struct net_device *netdev; |
| |
| if (!oct) |
| return; |
| |
| cancel_work_sync(&oct->tx_timeout_task); |
| cancel_work_sync(&oct->ctrl_mbox_task); |
| netdev = oct->netdev; |
| if (netdev->reg_state == NETREG_REGISTERED) |
| unregister_netdev(netdev); |
| |
| octep_device_cleanup(oct); |
| pci_release_mem_regions(pdev); |
| free_netdev(netdev); |
| pci_disable_pcie_error_reporting(pdev); |
| pci_disable_device(pdev); |
| } |
| |
| static struct pci_driver octep_driver = { |
| .name = OCTEP_DRV_NAME, |
| .id_table = octep_pci_id_tbl, |
| .probe = octep_probe, |
| .remove = octep_remove, |
| }; |
| |
| /** |
| * octep_init_module() - Module initialiation. |
| * |
| * create common resource for the driver and register PCI driver. |
| */ |
| static int __init octep_init_module(void) |
| { |
| int ret; |
| |
| pr_info("%s: Loading %s ...\n", OCTEP_DRV_NAME, OCTEP_DRV_STRING); |
| |
| /* work queue for all deferred tasks */ |
| octep_wq = create_singlethread_workqueue(OCTEP_DRV_NAME); |
| if (!octep_wq) { |
| pr_err("%s: Failed to create common workqueue\n", |
| OCTEP_DRV_NAME); |
| return -ENOMEM; |
| } |
| |
| ret = pci_register_driver(&octep_driver); |
| if (ret < 0) { |
| pr_err("%s: Failed to register PCI driver; err=%d\n", |
| OCTEP_DRV_NAME, ret); |
| destroy_workqueue(octep_wq); |
| return ret; |
| } |
| |
| pr_info("%s: Loaded successfully !\n", OCTEP_DRV_NAME); |
| |
| return ret; |
| } |
| |
| /** |
| * octep_exit_module() - Module exit routine. |
| * |
| * unregister the driver with PCI subsystem and cleanup common resources. |
| */ |
| static void __exit octep_exit_module(void) |
| { |
| pr_info("%s: Unloading ...\n", OCTEP_DRV_NAME); |
| |
| pci_unregister_driver(&octep_driver); |
| destroy_workqueue(octep_wq); |
| |
| pr_info("%s: Unloading complete\n", OCTEP_DRV_NAME); |
| } |
| |
| module_init(octep_init_module); |
| module_exit(octep_exit_module); |