| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2007-2012 Siemens AG |
| * |
| * Written by: |
| * Alexander Smirnov <alex.bluesman.smirnov@gmail.com> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/netdevice.h> |
| |
| #include <net/netlink.h> |
| #include <net/nl802154.h> |
| #include <net/mac802154.h> |
| #include <net/ieee802154_netdev.h> |
| #include <net/route.h> |
| #include <net/cfg802154.h> |
| |
| #include "ieee802154_i.h" |
| #include "cfg.h" |
| |
| static void ieee802154_tasklet_handler(struct tasklet_struct *t) |
| { |
| struct ieee802154_local *local = from_tasklet(local, t, tasklet); |
| struct sk_buff *skb; |
| |
| while ((skb = skb_dequeue(&local->skb_queue))) { |
| switch (skb->pkt_type) { |
| case IEEE802154_RX_MSG: |
| /* Clear skb->pkt_type in order to not confuse kernel |
| * netstack. |
| */ |
| skb->pkt_type = 0; |
| ieee802154_rx(local, skb); |
| break; |
| default: |
| WARN(1, "mac802154: Packet is of unknown type %d\n", |
| skb->pkt_type); |
| kfree_skb(skb); |
| break; |
| } |
| } |
| } |
| |
| struct ieee802154_hw * |
| ieee802154_alloc_hw(size_t priv_data_len, const struct ieee802154_ops *ops) |
| { |
| struct wpan_phy *phy; |
| struct ieee802154_local *local; |
| size_t priv_size; |
| |
| if (WARN_ON(!ops || !(ops->xmit_async || ops->xmit_sync) || !ops->ed || |
| !ops->start || !ops->stop || !ops->set_channel)) |
| return NULL; |
| |
| /* Ensure 32-byte alignment of our private data and hw private data. |
| * We use the wpan_phy priv data for both our ieee802154_local and for |
| * the driver's private data |
| * |
| * in memory it'll be like this: |
| * |
| * +-------------------------+ |
| * | struct wpan_phy | |
| * +-------------------------+ |
| * | struct ieee802154_local | |
| * +-------------------------+ |
| * | driver's private data | |
| * +-------------------------+ |
| * |
| * Due to ieee802154 layer isn't aware of driver and MAC structures, |
| * so lets align them here. |
| */ |
| |
| priv_size = ALIGN(sizeof(*local), NETDEV_ALIGN) + priv_data_len; |
| |
| phy = wpan_phy_new(&mac802154_config_ops, priv_size); |
| if (!phy) { |
| pr_err("failure to allocate master IEEE802.15.4 device\n"); |
| return NULL; |
| } |
| |
| phy->privid = mac802154_wpan_phy_privid; |
| |
| local = wpan_phy_priv(phy); |
| local->phy = phy; |
| local->hw.phy = local->phy; |
| local->hw.priv = (char *)local + ALIGN(sizeof(*local), NETDEV_ALIGN); |
| local->ops = ops; |
| |
| INIT_LIST_HEAD(&local->interfaces); |
| mutex_init(&local->iflist_mtx); |
| |
| tasklet_setup(&local->tasklet, ieee802154_tasklet_handler); |
| |
| skb_queue_head_init(&local->skb_queue); |
| |
| INIT_WORK(&local->sync_tx_work, ieee802154_xmit_sync_worker); |
| |
| /* init supported flags with 802.15.4 default ranges */ |
| phy->supported.max_minbe = 8; |
| phy->supported.min_maxbe = 3; |
| phy->supported.max_maxbe = 8; |
| phy->supported.min_frame_retries = 0; |
| phy->supported.max_frame_retries = 7; |
| phy->supported.max_csma_backoffs = 5; |
| phy->supported.lbt = NL802154_SUPPORTED_BOOL_FALSE; |
| |
| /* always supported */ |
| phy->supported.iftypes = BIT(NL802154_IFTYPE_NODE); |
| |
| return &local->hw; |
| } |
| EXPORT_SYMBOL(ieee802154_alloc_hw); |
| |
| void ieee802154_configure_durations(struct wpan_phy *phy) |
| { |
| u32 duration = 0; |
| |
| switch (phy->current_page) { |
| case 0: |
| if (BIT(phy->current_channel) & 0x1) |
| /* 868 MHz BPSK 802.15.4-2003: 20 ksym/s */ |
| duration = 50 * NSEC_PER_USEC; |
| else if (BIT(phy->current_channel) & 0x7FE) |
| /* 915 MHz BPSK 802.15.4-2003: 40 ksym/s */ |
| duration = 25 * NSEC_PER_USEC; |
| else if (BIT(phy->current_channel) & 0x7FFF800) |
| /* 2400 MHz O-QPSK 802.15.4-2006: 62.5 ksym/s */ |
| duration = 16 * NSEC_PER_USEC; |
| break; |
| case 2: |
| if (BIT(phy->current_channel) & 0x1) |
| /* 868 MHz O-QPSK 802.15.4-2006: 25 ksym/s */ |
| duration = 40 * NSEC_PER_USEC; |
| else if (BIT(phy->current_channel) & 0x7FE) |
| /* 915 MHz O-QPSK 802.15.4-2006: 62.5 ksym/s */ |
| duration = 16 * NSEC_PER_USEC; |
| break; |
| case 3: |
| if (BIT(phy->current_channel) & 0x3FFF) |
| /* 2.4 GHz CSS 802.15.4a-2007: 1/6 Msym/s */ |
| duration = 6 * NSEC_PER_USEC; |
| break; |
| default: |
| break; |
| } |
| |
| if (!duration) { |
| pr_debug("Unknown PHY symbol duration\n"); |
| return; |
| } |
| |
| phy->symbol_duration = duration; |
| phy->lifs_period = (IEEE802154_LIFS_PERIOD * phy->symbol_duration) / NSEC_PER_SEC; |
| phy->sifs_period = (IEEE802154_SIFS_PERIOD * phy->symbol_duration) / NSEC_PER_SEC; |
| } |
| EXPORT_SYMBOL(ieee802154_configure_durations); |
| |
| void ieee802154_free_hw(struct ieee802154_hw *hw) |
| { |
| struct ieee802154_local *local = hw_to_local(hw); |
| |
| BUG_ON(!list_empty(&local->interfaces)); |
| |
| mutex_destroy(&local->iflist_mtx); |
| |
| wpan_phy_free(local->phy); |
| } |
| EXPORT_SYMBOL(ieee802154_free_hw); |
| |
| static void ieee802154_setup_wpan_phy_pib(struct wpan_phy *wpan_phy) |
| { |
| /* TODO warn on empty symbol_duration |
| * Should be done when all drivers sets this value. |
| */ |
| |
| wpan_phy->lifs_period = |
| (IEEE802154_LIFS_PERIOD * wpan_phy->symbol_duration) / 1000; |
| wpan_phy->sifs_period = |
| (IEEE802154_SIFS_PERIOD * wpan_phy->symbol_duration) / 1000; |
| } |
| |
| int ieee802154_register_hw(struct ieee802154_hw *hw) |
| { |
| struct ieee802154_local *local = hw_to_local(hw); |
| struct net_device *dev; |
| int rc = -ENOSYS; |
| |
| local->workqueue = |
| create_singlethread_workqueue(wpan_phy_name(local->phy)); |
| if (!local->workqueue) { |
| rc = -ENOMEM; |
| goto out; |
| } |
| |
| hrtimer_init(&local->ifs_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); |
| local->ifs_timer.function = ieee802154_xmit_ifs_timer; |
| |
| wpan_phy_set_dev(local->phy, local->hw.parent); |
| |
| ieee802154_setup_wpan_phy_pib(local->phy); |
| |
| ieee802154_configure_durations(local->phy); |
| |
| if (!(hw->flags & IEEE802154_HW_CSMA_PARAMS)) { |
| local->phy->supported.min_csma_backoffs = 4; |
| local->phy->supported.max_csma_backoffs = 4; |
| local->phy->supported.min_maxbe = 5; |
| local->phy->supported.max_maxbe = 5; |
| local->phy->supported.min_minbe = 3; |
| local->phy->supported.max_minbe = 3; |
| } |
| |
| if (!(hw->flags & IEEE802154_HW_FRAME_RETRIES)) { |
| local->phy->supported.min_frame_retries = 3; |
| local->phy->supported.max_frame_retries = 3; |
| } |
| |
| if (hw->flags & IEEE802154_HW_PROMISCUOUS) |
| local->phy->supported.iftypes |= BIT(NL802154_IFTYPE_MONITOR); |
| |
| rc = wpan_phy_register(local->phy); |
| if (rc < 0) |
| goto out_wq; |
| |
| rtnl_lock(); |
| |
| dev = ieee802154_if_add(local, "wpan%d", NET_NAME_ENUM, |
| NL802154_IFTYPE_NODE, |
| cpu_to_le64(0x0000000000000000ULL)); |
| if (IS_ERR(dev)) { |
| rtnl_unlock(); |
| rc = PTR_ERR(dev); |
| goto out_phy; |
| } |
| |
| rtnl_unlock(); |
| |
| return 0; |
| |
| out_phy: |
| wpan_phy_unregister(local->phy); |
| out_wq: |
| destroy_workqueue(local->workqueue); |
| out: |
| return rc; |
| } |
| EXPORT_SYMBOL(ieee802154_register_hw); |
| |
| void ieee802154_unregister_hw(struct ieee802154_hw *hw) |
| { |
| struct ieee802154_local *local = hw_to_local(hw); |
| |
| tasklet_kill(&local->tasklet); |
| flush_workqueue(local->workqueue); |
| |
| rtnl_lock(); |
| |
| ieee802154_remove_interfaces(local); |
| |
| rtnl_unlock(); |
| |
| destroy_workqueue(local->workqueue); |
| wpan_phy_unregister(local->phy); |
| } |
| EXPORT_SYMBOL(ieee802154_unregister_hw); |
| |
| static int __init ieee802154_init(void) |
| { |
| return ieee802154_iface_init(); |
| } |
| |
| static void __exit ieee802154_exit(void) |
| { |
| ieee802154_iface_exit(); |
| |
| rcu_barrier(); |
| } |
| |
| subsys_initcall(ieee802154_init); |
| module_exit(ieee802154_exit); |
| |
| MODULE_DESCRIPTION("IEEE 802.15.4 subsystem"); |
| MODULE_LICENSE("GPL v2"); |