| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved. |
| * Copyright (c) 2020 Linaro Ltd. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/pinctrl/pinconf-generic.h> |
| #include <linux/pinctrl/pinconf.h> |
| #include <linux/pinctrl/pinmux.h> |
| #include "../pinctrl-utils.h" |
| #include "pinctrl-lpass-lpi.h" |
| |
| #define MAX_LPI_NUM_CLKS 2 |
| |
| struct lpi_pinctrl { |
| struct device *dev; |
| struct pinctrl_dev *ctrl; |
| struct gpio_chip chip; |
| struct pinctrl_desc desc; |
| char __iomem *tlmm_base; |
| char __iomem *slew_base; |
| struct clk_bulk_data clks[MAX_LPI_NUM_CLKS]; |
| struct mutex slew_access_lock; |
| const struct lpi_pinctrl_variant_data *data; |
| }; |
| |
| static int lpi_gpio_read(struct lpi_pinctrl *state, unsigned int pin, |
| unsigned int addr) |
| { |
| return ioread32(state->tlmm_base + LPI_TLMM_REG_OFFSET * pin + addr); |
| } |
| |
| static int lpi_gpio_write(struct lpi_pinctrl *state, unsigned int pin, |
| unsigned int addr, unsigned int val) |
| { |
| iowrite32(val, state->tlmm_base + LPI_TLMM_REG_OFFSET * pin + addr); |
| |
| return 0; |
| } |
| |
| static const struct pinctrl_ops lpi_gpio_pinctrl_ops = { |
| .get_groups_count = pinctrl_generic_get_group_count, |
| .get_group_name = pinctrl_generic_get_group_name, |
| .get_group_pins = pinctrl_generic_get_group_pins, |
| .dt_node_to_map = pinconf_generic_dt_node_to_map_group, |
| .dt_free_map = pinctrl_utils_free_map, |
| }; |
| |
| static int lpi_gpio_get_functions_count(struct pinctrl_dev *pctldev) |
| { |
| struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); |
| |
| return pctrl->data->nfunctions; |
| } |
| |
| static const char *lpi_gpio_get_function_name(struct pinctrl_dev *pctldev, |
| unsigned int function) |
| { |
| struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); |
| |
| return pctrl->data->functions[function].name; |
| } |
| |
| static int lpi_gpio_get_function_groups(struct pinctrl_dev *pctldev, |
| unsigned int function, |
| const char *const **groups, |
| unsigned *const num_qgroups) |
| { |
| struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); |
| |
| *groups = pctrl->data->functions[function].groups; |
| *num_qgroups = pctrl->data->functions[function].ngroups; |
| |
| return 0; |
| } |
| |
| static int lpi_gpio_set_mux(struct pinctrl_dev *pctldev, unsigned int function, |
| unsigned int group_num) |
| { |
| struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); |
| const struct lpi_pingroup *g = &pctrl->data->groups[group_num]; |
| u32 val; |
| int i, pin = g->pin; |
| |
| for (i = 0; i < g->nfuncs; i++) { |
| if (g->funcs[i] == function) |
| break; |
| } |
| |
| if (WARN_ON(i == g->nfuncs)) |
| return -EINVAL; |
| |
| val = lpi_gpio_read(pctrl, pin, LPI_GPIO_CFG_REG); |
| u32p_replace_bits(&val, i, LPI_GPIO_FUNCTION_MASK); |
| lpi_gpio_write(pctrl, pin, LPI_GPIO_CFG_REG, val); |
| |
| return 0; |
| } |
| |
| static const struct pinmux_ops lpi_gpio_pinmux_ops = { |
| .get_functions_count = lpi_gpio_get_functions_count, |
| .get_function_name = lpi_gpio_get_function_name, |
| .get_function_groups = lpi_gpio_get_function_groups, |
| .set_mux = lpi_gpio_set_mux, |
| }; |
| |
| static int lpi_config_get(struct pinctrl_dev *pctldev, |
| unsigned int pin, unsigned long *config) |
| { |
| unsigned int param = pinconf_to_config_param(*config); |
| struct lpi_pinctrl *state = dev_get_drvdata(pctldev->dev); |
| unsigned int arg = 0; |
| int is_out; |
| int pull; |
| u32 ctl_reg; |
| |
| ctl_reg = lpi_gpio_read(state, pin, LPI_GPIO_CFG_REG); |
| is_out = ctl_reg & LPI_GPIO_OE_MASK; |
| pull = FIELD_GET(LPI_GPIO_PULL_MASK, ctl_reg); |
| |
| switch (param) { |
| case PIN_CONFIG_BIAS_DISABLE: |
| if (pull == LPI_GPIO_BIAS_DISABLE) |
| arg = 1; |
| break; |
| case PIN_CONFIG_BIAS_PULL_DOWN: |
| if (pull == LPI_GPIO_PULL_DOWN) |
| arg = 1; |
| break; |
| case PIN_CONFIG_BIAS_BUS_HOLD: |
| if (pull == LPI_GPIO_KEEPER) |
| arg = 1; |
| break; |
| case PIN_CONFIG_BIAS_PULL_UP: |
| if (pull == LPI_GPIO_PULL_UP) |
| arg = 1; |
| break; |
| case PIN_CONFIG_INPUT_ENABLE: |
| case PIN_CONFIG_OUTPUT: |
| if (is_out) |
| arg = 1; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| *config = pinconf_to_config_packed(param, arg); |
| return 0; |
| } |
| |
| static int lpi_config_set(struct pinctrl_dev *pctldev, unsigned int group, |
| unsigned long *configs, unsigned int nconfs) |
| { |
| struct lpi_pinctrl *pctrl = dev_get_drvdata(pctldev->dev); |
| unsigned int param, arg, pullup = LPI_GPIO_BIAS_DISABLE, strength = 2; |
| bool value, output_enabled = false; |
| const struct lpi_pingroup *g; |
| unsigned long sval; |
| int i, slew_offset; |
| u32 val; |
| |
| g = &pctrl->data->groups[group]; |
| for (i = 0; i < nconfs; i++) { |
| param = pinconf_to_config_param(configs[i]); |
| arg = pinconf_to_config_argument(configs[i]); |
| |
| switch (param) { |
| case PIN_CONFIG_BIAS_DISABLE: |
| pullup = LPI_GPIO_BIAS_DISABLE; |
| break; |
| case PIN_CONFIG_BIAS_PULL_DOWN: |
| pullup = LPI_GPIO_PULL_DOWN; |
| break; |
| case PIN_CONFIG_BIAS_BUS_HOLD: |
| pullup = LPI_GPIO_KEEPER; |
| break; |
| case PIN_CONFIG_BIAS_PULL_UP: |
| pullup = LPI_GPIO_PULL_UP; |
| break; |
| case PIN_CONFIG_INPUT_ENABLE: |
| output_enabled = false; |
| break; |
| case PIN_CONFIG_OUTPUT: |
| output_enabled = true; |
| value = arg; |
| break; |
| case PIN_CONFIG_DRIVE_STRENGTH: |
| strength = arg; |
| break; |
| case PIN_CONFIG_SLEW_RATE: |
| if (arg > LPI_SLEW_RATE_MAX) { |
| dev_err(pctldev->dev, "invalid slew rate %u for pin: %d\n", |
| arg, group); |
| return -EINVAL; |
| } |
| |
| slew_offset = g->slew_offset; |
| if (slew_offset == LPI_NO_SLEW) |
| break; |
| |
| mutex_lock(&pctrl->slew_access_lock); |
| |
| sval = ioread32(pctrl->slew_base + LPI_SLEW_RATE_CTL_REG); |
| sval &= ~(LPI_SLEW_RATE_MASK << slew_offset); |
| sval |= arg << slew_offset; |
| iowrite32(sval, pctrl->slew_base + LPI_SLEW_RATE_CTL_REG); |
| |
| mutex_unlock(&pctrl->slew_access_lock); |
| break; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| val = lpi_gpio_read(pctrl, group, LPI_GPIO_CFG_REG); |
| |
| u32p_replace_bits(&val, pullup, LPI_GPIO_PULL_MASK); |
| u32p_replace_bits(&val, LPI_GPIO_DS_TO_VAL(strength), |
| LPI_GPIO_OUT_STRENGTH_MASK); |
| u32p_replace_bits(&val, output_enabled, LPI_GPIO_OE_MASK); |
| |
| lpi_gpio_write(pctrl, group, LPI_GPIO_CFG_REG, val); |
| |
| if (output_enabled) { |
| val = u32_encode_bits(value ? 1 : 0, LPI_GPIO_VALUE_OUT_MASK); |
| lpi_gpio_write(pctrl, group, LPI_GPIO_VALUE_REG, val); |
| } |
| |
| return 0; |
| } |
| |
| static const struct pinconf_ops lpi_gpio_pinconf_ops = { |
| .is_generic = true, |
| .pin_config_group_get = lpi_config_get, |
| .pin_config_group_set = lpi_config_set, |
| }; |
| |
| static int lpi_gpio_direction_input(struct gpio_chip *chip, unsigned int pin) |
| { |
| struct lpi_pinctrl *state = gpiochip_get_data(chip); |
| unsigned long config; |
| |
| config = pinconf_to_config_packed(PIN_CONFIG_INPUT_ENABLE, 1); |
| |
| return lpi_config_set(state->ctrl, pin, &config, 1); |
| } |
| |
| static int lpi_gpio_direction_output(struct gpio_chip *chip, |
| unsigned int pin, int val) |
| { |
| struct lpi_pinctrl *state = gpiochip_get_data(chip); |
| unsigned long config; |
| |
| config = pinconf_to_config_packed(PIN_CONFIG_OUTPUT, val); |
| |
| return lpi_config_set(state->ctrl, pin, &config, 1); |
| } |
| |
| static int lpi_gpio_get(struct gpio_chip *chip, unsigned int pin) |
| { |
| struct lpi_pinctrl *state = gpiochip_get_data(chip); |
| |
| return lpi_gpio_read(state, pin, LPI_GPIO_VALUE_REG) & |
| LPI_GPIO_VALUE_IN_MASK; |
| } |
| |
| static void lpi_gpio_set(struct gpio_chip *chip, unsigned int pin, int value) |
| { |
| struct lpi_pinctrl *state = gpiochip_get_data(chip); |
| unsigned long config; |
| |
| config = pinconf_to_config_packed(PIN_CONFIG_OUTPUT, value); |
| |
| lpi_config_set(state->ctrl, pin, &config, 1); |
| } |
| |
| #ifdef CONFIG_DEBUG_FS |
| #include <linux/seq_file.h> |
| |
| static unsigned int lpi_regval_to_drive(u32 val) |
| { |
| return (val + 1) * 2; |
| } |
| |
| static void lpi_gpio_dbg_show_one(struct seq_file *s, |
| struct pinctrl_dev *pctldev, |
| struct gpio_chip *chip, |
| unsigned int offset, |
| unsigned int gpio) |
| { |
| struct lpi_pinctrl *state = gpiochip_get_data(chip); |
| struct pinctrl_pin_desc pindesc; |
| unsigned int func; |
| int is_out; |
| int drive; |
| int pull; |
| u32 ctl_reg; |
| |
| static const char * const pulls[] = { |
| "no pull", |
| "pull down", |
| "keeper", |
| "pull up" |
| }; |
| |
| pctldev = pctldev ? : state->ctrl; |
| pindesc = pctldev->desc->pins[offset]; |
| ctl_reg = lpi_gpio_read(state, offset, LPI_GPIO_CFG_REG); |
| is_out = ctl_reg & LPI_GPIO_OE_MASK; |
| |
| func = FIELD_GET(LPI_GPIO_FUNCTION_MASK, ctl_reg); |
| drive = FIELD_GET(LPI_GPIO_OUT_STRENGTH_MASK, ctl_reg); |
| pull = FIELD_GET(LPI_GPIO_PULL_MASK, ctl_reg); |
| |
| seq_printf(s, " %-8s: %-3s %d", pindesc.name, is_out ? "out" : "in", func); |
| seq_printf(s, " %dmA", lpi_regval_to_drive(drive)); |
| seq_printf(s, " %s", pulls[pull]); |
| } |
| |
| static void lpi_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) |
| { |
| unsigned int gpio = chip->base; |
| unsigned int i; |
| |
| for (i = 0; i < chip->ngpio; i++, gpio++) { |
| lpi_gpio_dbg_show_one(s, NULL, chip, i, gpio); |
| seq_puts(s, "\n"); |
| } |
| } |
| |
| #else |
| #define lpi_gpio_dbg_show NULL |
| #endif |
| |
| static const struct gpio_chip lpi_gpio_template = { |
| .direction_input = lpi_gpio_direction_input, |
| .direction_output = lpi_gpio_direction_output, |
| .get = lpi_gpio_get, |
| .set = lpi_gpio_set, |
| .request = gpiochip_generic_request, |
| .free = gpiochip_generic_free, |
| .dbg_show = lpi_gpio_dbg_show, |
| }; |
| |
| static int lpi_build_pin_desc_groups(struct lpi_pinctrl *pctrl) |
| { |
| int i, ret; |
| |
| for (i = 0; i < pctrl->data->npins; i++) { |
| const struct pinctrl_pin_desc *pin_info = pctrl->desc.pins + i; |
| |
| ret = pinctrl_generic_add_group(pctrl->ctrl, pin_info->name, |
| (int *)&pin_info->number, 1, NULL); |
| if (ret < 0) |
| goto err_pinctrl; |
| } |
| |
| return 0; |
| |
| err_pinctrl: |
| for (; i > 0; i--) |
| pinctrl_generic_remove_group(pctrl->ctrl, i - 1); |
| |
| return ret; |
| } |
| |
| int lpi_pinctrl_probe(struct platform_device *pdev) |
| { |
| const struct lpi_pinctrl_variant_data *data; |
| struct device *dev = &pdev->dev; |
| struct lpi_pinctrl *pctrl; |
| int ret; |
| |
| pctrl = devm_kzalloc(dev, sizeof(*pctrl), GFP_KERNEL); |
| if (!pctrl) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, pctrl); |
| |
| data = of_device_get_match_data(dev); |
| if (!data) |
| return -EINVAL; |
| |
| pctrl->data = data; |
| pctrl->dev = &pdev->dev; |
| |
| pctrl->clks[0].id = "core"; |
| pctrl->clks[1].id = "audio"; |
| |
| pctrl->tlmm_base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(pctrl->tlmm_base)) |
| return dev_err_probe(dev, PTR_ERR(pctrl->tlmm_base), |
| "TLMM resource not provided\n"); |
| |
| pctrl->slew_base = devm_platform_ioremap_resource(pdev, 1); |
| if (IS_ERR(pctrl->slew_base)) |
| return dev_err_probe(dev, PTR_ERR(pctrl->slew_base), |
| "Slew resource not provided\n"); |
| |
| if (of_property_read_bool(dev->of_node, "qcom,adsp-bypass-mode")) |
| ret = devm_clk_bulk_get_optional(dev, MAX_LPI_NUM_CLKS, pctrl->clks); |
| else |
| ret = devm_clk_bulk_get(dev, MAX_LPI_NUM_CLKS, pctrl->clks); |
| |
| if (ret) |
| return ret; |
| |
| ret = clk_bulk_prepare_enable(MAX_LPI_NUM_CLKS, pctrl->clks); |
| if (ret) |
| return dev_err_probe(dev, ret, "Can't enable clocks\n"); |
| |
| pctrl->desc.pctlops = &lpi_gpio_pinctrl_ops; |
| pctrl->desc.pmxops = &lpi_gpio_pinmux_ops; |
| pctrl->desc.confops = &lpi_gpio_pinconf_ops; |
| pctrl->desc.owner = THIS_MODULE; |
| pctrl->desc.name = dev_name(dev); |
| pctrl->desc.pins = data->pins; |
| pctrl->desc.npins = data->npins; |
| pctrl->chip = lpi_gpio_template; |
| pctrl->chip.parent = dev; |
| pctrl->chip.base = -1; |
| pctrl->chip.ngpio = data->npins; |
| pctrl->chip.label = dev_name(dev); |
| pctrl->chip.of_gpio_n_cells = 2; |
| pctrl->chip.can_sleep = false; |
| |
| mutex_init(&pctrl->slew_access_lock); |
| |
| pctrl->ctrl = devm_pinctrl_register(dev, &pctrl->desc, pctrl); |
| if (IS_ERR(pctrl->ctrl)) { |
| ret = PTR_ERR(pctrl->ctrl); |
| dev_err(dev, "failed to add pin controller\n"); |
| goto err_pinctrl; |
| } |
| |
| ret = lpi_build_pin_desc_groups(pctrl); |
| if (ret) |
| goto err_pinctrl; |
| |
| ret = devm_gpiochip_add_data(dev, &pctrl->chip, pctrl); |
| if (ret) { |
| dev_err(pctrl->dev, "can't add gpio chip\n"); |
| goto err_pinctrl; |
| } |
| |
| return 0; |
| |
| err_pinctrl: |
| mutex_destroy(&pctrl->slew_access_lock); |
| clk_bulk_disable_unprepare(MAX_LPI_NUM_CLKS, pctrl->clks); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(lpi_pinctrl_probe); |
| |
| int lpi_pinctrl_remove(struct platform_device *pdev) |
| { |
| struct lpi_pinctrl *pctrl = platform_get_drvdata(pdev); |
| int i; |
| |
| mutex_destroy(&pctrl->slew_access_lock); |
| clk_bulk_disable_unprepare(MAX_LPI_NUM_CLKS, pctrl->clks); |
| |
| for (i = 0; i < pctrl->data->npins; i++) |
| pinctrl_generic_remove_group(pctrl->ctrl, i); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(lpi_pinctrl_remove); |
| |
| MODULE_DESCRIPTION("QTI LPI GPIO pin control driver"); |
| MODULE_LICENSE("GPL"); |